Problems with HP Officejet Pro L7680

I bought this machine used and immediatly had "jibberish one or two line printing" in MS Windows 7.  Tried a new usb cable, hard reset, complete driver removal and reinstall, and setup reset on printer.  No change in behavior.  I then installed Ubuntu 13.10 operating system. Printing text..perfect.  Printing photos..perfect.  I have not tried the fax portion as I have no need for faxing.  So IMHO the problem is ....MS Windows 7.  Since this is an older Officejet Printer I don't believe Microsoft will be addressing the problem except by suggesting a new printer.  HP is ditto on that.

Hello ,
Welcome to the HP Support Forums!
I would have to agree that the issue is within Microsoft Windows 7 regarding the printing issue with the Officejet L7780. Since the printer will print fine when using Ubuntu, it would appear there is an issue with the drivers and or software on Windows 7.
Have you tried using the Print and Scan Dr? This will look into the drivers, software, etc on the computer and attempt to resolve on its own. Let me know what the results are when you run it.
You could try the steps in this HP guide: Installing an Alternate Print Driver in Windows 7 for a USB Cable Connection. The L7780 does not display in the document but it will work with the Deskjet 9800 driver.
I hope this helps,
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Similar Messages

  • Problems with hp officejet pro 8610 printing labels

    I have a new HP offficejet Pro 8610 less than 6 months old. I was printing address lables (Avery 8160) and everything seemed fine after the first group then when I started the second set they were out of alignment I readjusted the paper and tried again to print and I get a message that there is a problem with printer or the the paper is not the wrong size for the job and its the same paper so thats not it I tried shutting everything down and starting over and it allowed me to print one and it was perfect but when I tried to print another it went back to same message wrong paper size I am still using same size paper I am using Avery 8160 labels and that is the size on the avery website I am printing from. Any help is much appreciated thank you.

    Hello ,
    Welcome to the HP Support Forums!
    I would have to agree that the issue is within Microsoft Windows 7 regarding the printing issue with the Officejet L7780. Since the printer will print fine when using Ubuntu, it would appear there is an issue with the drivers and or software on Windows 7.
    Have you tried using the Print and Scan Dr? This will look into the drivers, software, etc on the computer and attempt to resolve on its own. Let me know what the results are when you run it.
    You could try the steps in this HP guide: Installing an Alternate Print Driver in Windows 7 for a USB Cable Connection. The L7780 does not display in the document but it will work with the Deskjet 9800 driver.
    I hope this helps,
    JERENDS
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Problem with HP Officejet Pro 8500 printer: Ink is vanished without any prints due to cleanups.

    Hello everybody,
                                    The printer HP Officejet Pro all-in-one 8500A A910 cleans printheads every time I turn it on. printer was updated with the lastet driver but my yellow,cyan,magenta inks gets vansihed without taking any colour prints.I take only BLACK prints(less than 500) and do scans.
    This is worse printer i have ever used. It is using inks while clean up at startup or in between.Frustating thing is that It is using ink even during SCANS. Now, i really doubt the intellegence of designers of hp to such a big BUG.
    Please update the driver so that during startup it will ask for SCAN or Print OR Clean the printheads when first print is given and addition to optimise the cleanups.
    Hoping to get some solution form HP.

    Hi arr_8500,
    I understand you have an Officejet 8500 A910 that is running the clean printhead function each time you turn it on. I will do my best to assist you with this.
    The reason the printer keeps running the clean printhead function is self maintenance. The printer is detecting an issue, so it will continue to run the clean printhead function until it's not detecting an issue. I would suggest you follow through this Fixing Ink Streaks, Faded Prints, and Other Common Print Quality Problems to help clean out any ink build up and things like that. I'd also recommend that you manually clean your printheads to remove any build up there as well. 
    Finally, it's best to have your printer plugged directly to a wall outlet. If it's not already in one, please move it.
    Hope this helps, have a great day!!
    Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    **MissTeriLynn**
    I work on behalf of HP

  • Problem with HP Officejet Pro 8500 printer: cleans printheads every time it's turned on

    Hello everybody,
    the printer HP Officejet Pro all-in-one 8500 (A909a - product n. CB022A) cleans printheads every time I turn it on. This problem affects any HP Officejet Pro 8500 printer, it isn't a problem only of that one I purchased. It is an annoying and irritating bug because the printheads cleaning at each power on implies two bad disadvantages:
    ink waste (each printheads cleaning process consumes some ink);
    too much time (2-3 minutes) to get the printer ready after power on.
    I upgraded my printer with the last firmware available on the HP site (firmware ver. DLM1FN1006BR) but the bug is still present.
    At this point I ask:
    there exists a way (or procedure) to disable this unnecessary automatic cleaning at every power on?
    Can someone contact HP engineers or tell me how contact directly one of them to indicate the bug and ask a new firmware update?
    Please don't tell me to leave the printer turned on all the time or that the printheads cleaning at every power on is a normal behavior! Where is then power and ink saving claimed for this printer model?
    I hope to receive a solution for this problem. Thanks in advance to everybody will help me!
    This question was solved.
    View Solution.

    The servicing when the printer is turned on is normal and is required to keep the printheads healthy (not clogged). See here for information.
    As for power savings, the printer will automatically go into a low power mode when not printing for some time.  It is not necessary to turn the product off and on to save power.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Webscan problem with HP Officejet Pro 8600 printer and OS Mavericks

    I have an iMac with OS 10.9 Mavericks installed and an HP Officejet Pro 8600 Plus N911g printer.  I recently downloaded the "HP-Inkjet-SW-OSX-Mavericks_v12.34.37" software update from the HP website but, since installing it, the image preview feature on Webscan now only shows a black screen and I cannot download the scanned image.  I have uninstalled the update and reinstalled the old software  - "Officejet-Pro-8600_v12.23.0" but the problem persists.
    I am not sure if this is an HP problem or a Mavericks bug.  Any advice/help would be greatly appreciated

    The servicing when the printer is turned on is normal and is required to keep the printheads healthy (not clogged). See here for information.
    As for power savings, the printer will automatically go into a low power mode when not printing for some time.  It is not necessary to turn the product off and on to save power.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Installation problem with HP Officejet Pro Plus 8600 with Windows 8.1

    My system recently updated to Windows 8.1 and my HP Officejet Pro Plus 8600 will no longer function with my computers (Dell desktop, Hp laptop). It shows up in control panel, but says the driver is unavailable. I have tried to download the compatible updated driver from the HP site numerous times, but the install always fails. The error message says "failed to add port monitor HP Discovery Port Monitor (HP Officejet Pro 8600). The machines were running Windows 8 before the update and the printer/scanner/copy/fax functions worked fine with the computers. The printer is still recognized in my wireless network and prints from my phone and iPad. I've used the HP uninstall wizard, but there is no program listed for HP 8600 to uninstall. Help!

    Hello @yrtxtm ,
    Thank you for joining us on the HP Forums today, hope you enjoy your time with us!
    I understand you are having some issues installing the Officejet 8600 on your windows operating system.
    Try running the HP Print and Scan Doctor automated tool and let me know if that fixes the issue. I have seen it fix this issue multiple times. Best of luck.
    Click here to download and run the Print and Scan Doctor >>> www.hp.com/go/tools
    Look forward to hearing back from you!
    I worked for HP.

  • Re: Problem with HP Officejet Pro 8500 printer: cleans printheads every time it's turned on

    I own two of these printers and they both have been cleaning printheads every time it's turned on. My old HP officejet never had  these problems. 
    The real problem is HP s   credibility . They promoted that these printers used half the ink as any other printer.  Even consumerreports showed 1/2  the cost per page.
    As we all know that is pure BS  notwithstanding  the cleaning printheads issues.   
    Maybe I will let Costco know that I and all owners are unhappy and see if they will refund. They still sell them . 
    I will repost if I have any success.

    If the printer is a year or couple yrs old, maybe the printheads need to be replaced? I once thought they would last forever, and that's really not the case with them, nor anything else really. Hope costco has some good news for you

  • Duplex Printing Bug with HP OfficeJet Pro L7680

    Well - Duplex printing works but the back page will only print with binding on the top, Binding on the side does not work! Minor bug but still a bug at least with the HP!!

    Kev,
    A couple of points - assuming your using the HP OfficeJet Printer - I am assuming your connecting it via the Ethernet point which means it is communicating via IP. That being said - here is what I ran into.
    When I first added the HP Printer - Leopard wanted to configure the printer via BONJOUR. I went ahead and let it do that - however printing was terrible!!!! I could send jobs to the printq, but the only way they would print was if I turned the printer on/off again - and the the would magically start printing. Then the printer would go "offline" and I was forced to do this same on/off routine.
    So - I went back into add printers - and let the dialog box sit there for a little while and all of the sudden the list updated with an HP2A7180 - Kind - IP. I selected this printer and then told it to use the HP driver via the Print Using - drop down selector and my HP has been working fine since (minus the duplex).
    Additionally it installed an configuration utility which allows me to monitor inks, settings and such.
    Hope this helps - Bill

  • Copy problem with HP Officejet Pro 8600-always copys on both sides of paper

    When I want to make a copy of a document, i.e., insert the document on the glass surface under the printer cover, I touch the copy function on the printer and the printer always makes a copy of the document on both sides of the paper.  I do not know how to change the printer setting(s) in order to have a one sided copy feature.

    Hi,
    From the printer front panel click on Copy.
    Click the Two Sided button and select "1 sided original - 1 sided copy".
    Next click the Settings button, select Set as New Defaults and confirm, now 1 sided copy will default for any copy job.
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Since update HP Officejet Pro L7680 printer work with Windows 7 I have an HP busy icon

    HP Officejet Pro L7680. Serial #[removed for privacy] . Windows 7 64 bit Home Premium.
    The install seems to have worked well, but there is now an HP busy icon in mid-screen for the past 24 hours. Can I get rid of it? I've tried evrything but a re-boot and don't want to do that if it will interupt a process.

    I have the same issue with my OJ 6500 (network connected).  And I've been just been sent on a wild goose chase to install the support assistant - which didn't actually resolve my issue.  When I go directly to the drivers, it recognizes my OS as Windows 10, but doesn't give me a matching driver package to download... How/when will this be resolved? Does anyone have a workaround?If I knew that my printer/scanner doesn't work anymore I certainly wouldn't have upgraded to Windows 10.  Win 8.1 wasn't perfect, but at least everything worked... Thanks for any suggestions!

  • HP OFFICEJET PRO L7680 All-in-One PRINTER does not print yellow color at all

    Last week I understood that my Printer does not print at all yellow color.
    All other colors and tests I made are ok.
    I cleared printheads, made all printing tests, and diagnostic pages.
    In every printing was missing the yellow color..
    I changed the yellow catridge with another full one, and the problem persists..
    PLS could any body help me?
    Many tks
    antpep

    Welcome to the community @antpep
    I understand your Officejet Pro L7680 is no longer printing in yellow for you, and I'd like to offer my suggestion that may help you!
    Please click on the link below and try the steps in the guide.
    Fixing Print Quality Problems for the HP Officejet Pro L7500, L7600, and L7700 All-in-One Printer Se...
    If the yellow is still not printing for you and you reach the step to "replace the printhead", please consider contacting HP's technical support to see what your options may be with them in regards to a replacement part or unit.
    HP's contact info:
    If you are calling within North America, the number is 1-800-474-6836 and if you are calling outside of the US/Canada,: click here.
    Have a wonderful weekend ahead and thank you for posting in the community
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Can hp officejet pro l7680 print using dp-g310 print server

    hello.  I'm trying to set up my hp L7680 all-in-one printer to print wirelessly using the dlink dp-G310 print server, but I keep getting the following message:"your computer appears to be configured correctly, but the device, or resource(192.168.0.10) is not responding."  First, can anyone tell me if what I'm trying to do is possible, and second, how to do it.
    Thanks.

    This seems like the same problem I have with the OfficeJet Pro 8500 I purchased today. I bought this to replace the OfficeJet 5510 which completely stopped working once the upgrade was made to Snow Leopard.
    I can print perfectly ok from the computers we have (all running Snow Leopard) over an ethernet network but when I try to send a document as a fax, the "send fax" button in the print dialog box just remains grey.
    I have rebooted the computers, rebooted the OfficeJet and re-installed the HP software - all with no change or improvement.
    Maybe I have lost the plot like CdaveC and need some pointers.
    Thanks in advance for any suggestions.

  • HP Pavilion dm4-1160us not interfacin​g with HP Officejet Pro 8500 A e All-in-One Printer A910a

    HP Pavilion dm4-1160 us Entertainment Notebook stoped pring with HP Officejet Pro 8500 A e All-in-One Printer A910a
    Operating System is Microsoft Windows 7 Home Premium (64bit) Service Pack 1
    How do I get the printer working again?

    Hello white2012.
    It would help knowing how the printer is connected to the computer (USB, Ethernet cable, Wifi).
    Is there any error message shown in the computer or in the printer?
    Cheers!
    Wixma.
    I am an HP employee.
    Say thanks by clicking the Kudos star in the post.
    If my reply resolved your problem, please mark it as as Accepted Solution so that it can be found easier by other people.

  • Printing with HP Officejet Pro 8500 A909n Series Printer & Apple Air Print

    I am trying to use my IPad and print from it through Air Print.
    Has anyone had any success in printing from an IPad, using the latest Apple IPad operating system (iOS 4.2) to an  HP Officejet Pro 8500 A909n Series Printer?
    The documentation from Apple indicates compatibility with:
    HP Officejet Pro 8500A e-AiO HP Officejet Pro 8500A Plus e-AiO HP Officejet Pro 8500A Premium e-AiO
    Will  the 8500 A909n work?
    Thanks.

    Hi,
    Airprint is not supported for HP Officejet Pro 8500 A909m Series.
    Thank you.
    I am an HP employee
    **** Please mark the post that solves your problem as "Accepted Solution" ****

  • HP OfficeJet Pro L7680 all-in-one: Does it have internal stored memory?

    Same question as the last post only for a differnet printer model (sorry for what may seem like a duplicate question - I'm just trying to be sure I don't cause myself a headache later).
     I have an HP OfficeJet Pro L7680 All-In-One (FAX/Scan/Print/Photo) printer that I'd like to get rid of it.  Before I dispose of it, and for security purposes, I'd like to know if there's an internal hard drive that could potentially be storing anything I may have copied, scanned or faxed.

    Hello sixmil5, and welcome to the HP Forums, I hope you enjoy your experience! I see you have concerns about the printers internal memory.  The memory is automatically reset when the printer power is unplugged, so you should have no issue with personal information being saved.  Thank you for posting on the HP Forums and please let me know if you have any other questions.

Maybe you are looking for

  • How do I copy and paste from internet I could do this on internet explorer

    I need to be able to copy from the internet and paste in my reports. I can't do that on Foxfire! Help

  • All downloads have been paused.  disk you are attempting to use is full.

    I recently moved my library to hard drive that has 244 gb, but I am getting this error message for my 4gb ipod when I try to download and synch. Anybody know why?

  • Need help on BO Generator

    Hi, I am currently working on MAU 7.0 SR1. I wish to do some enhancements in this application and as a part of which some of the syncBo's will change. I understand there is a tool called BO Generator to regenerate the syncBo for client side developme

  • Nokia Auto shutting down problem

    Since last week my 5800 shuts down like crazy. 1 time it shuts down like after 10 seconds when started up then after 50 mins... I have the latest firmware installed. Already hard resetted the thing. I did notice something: When I took the sim card ou

  • Man pages & documentation, optional?

    Hello, I'm using localepurge every after update/installation and megabytes trown out are countless (with all respect for all other languages). Isn't waste? Furthermore Lot of html docs are laying around and I merely read one of them. Nearly 100 Mb. N