Problems with HP printer and PSE 11 (was bill v)

When using my HP 7020e photosmart printer and Adobe photoshop elements 11, I get a very small white border on the prints. I have set for borderless printing. Adobe says the print size is 4.2 x 6.18 instead of 4 x 6. Any suggestions?

I had already set it to borderless but it still prints a very small white 
border. HP had no solution. I am ready to send the printer back to them.
In a message dated 1/14/2014 5:47:22 A.M. Eastern Standard Time, 
[email protected] writes:
Re:  Problems with HP printer and PSE 11 (was bill v)
created by hyadav (http://forums.adobe.com/people/hyadav)  in Photoshop 
Elements - View the full  discussion
(http://forums.adobe.com/message/6010537#6010537)

Similar Messages

  • Airport Extreme - problem with usb printer and usb disk

    I have Airport extreme with firmware 7.1. I try connect usb disk and usb printer with usb-hub to airport. I can't get disk or printer working. Also try connect only disk or printer without usb-hub to airport getting same problem. How I get disk and printer working with wireless network (windows pc computers)?
    1)
    My printer is HP PSC 1210 all-in-one ( http://h10025.www1.hp.com/ewfrf/wc/product?product=90764&lc=fi&cc=fi&dlc=fi&lang =fi&cc=fi&y=0&x=0 )
    - printer seems working fine after installing bonjour printer installing wizard.
    - I get error (in windows) when I try print document from word. Error only says "error printing" in status value.
    - In airport utility all seems ok. Airport see usb printer "Hewlett-Packard psc 1200 series"
    - printer protocol is RAW and driver manufacture HP (also try with microsoft driver)
    2)
    USB disk is Targa Databox II 250
    - Airport utility says "Disk needs repair. Errors were found with a disk connected to your airport base station. please connect the usb disk to your mac or pc and use disk utility or another disk application to repair the disk"
    - I have connected Targa usb disk to windows pc and run scandisk and defreg. No errors found in windows. Result..no help for airport

    I have a similar problem to your second issue. Tried connecting a Netdisk to the USB port of the Airport Extreme and it also said there was a problem with the disk. Have performed a low level format on the disk and Airport Extreme still complained the disk had a problem.
    After unplugging the disk, my route decided to stop allowing wireless connections even after rebooting. Ended up having to hard reset the Airport Extreme and reconfigure it with my old settings to work again.
    FWIW, the first Airport Extreme I purchased today only worked on 802.11a and steadfastly refused to work on b/g so had to get a replacement. I suspect Apple's quality control is not quite as good as it used to be.

  • Problems with color printing in PSE 6.0

    I have installed a HP Premium Photosmart All-in-One Printer. It prints pictures with excellent picture and quality color when I print from My Pictures. The picture and color quality when I print from PSE Organizer is very poor. I have Color Management set to Adobe RGB. Can anyone give suggestions on what I need to do so I can print good, quality photos from Organizer? I appreciate any ideas.

    There are various opinions on how to deal with this problem. Try this:
    Print from Editor. Yes, the experts assert that the print engine differs between editor and organizer.
    Calibrate your monitor
    In Editor, Color settings>sRGB
    In printer setup>properties>print space>same as source. The idea here is that you do not want both Elements and the printer to manage the color output.

  • Problem with HP printer and Network

    I recently purchased a MacBook Pro and HP 8600 wireless printer.  I'm using an airport extreme base station.
    I'm having trouble with network connectivity and wondered if the printer is the culprit--many times after printing, I lose my network connection completely.
    I've tried updating base station software, computer software updates, re-booting the base station, etc., but nothing seems to permanently solve the problem.
    Would appreciate any insights.
    Thanks

    Sounds like this could be an issue with the software. To start I want to be sure that we remove the software fully and correcty before we continue. Follow the instructions below and see what happens after. 
    First if you use a USB cord, make sure to remove it (this is important). Do not plug it back in until the software directs you to. Then go through the Devices and Printers, Programs and Features and Device Manager folders and insure that all copies, files, and programs related to the printer are removed. Then as directed, restart the computer.
    In the START menu type "%temp%" and press ENTER. Here I want you to press Ctrl+A and hit DELETE. Some of the files will not allow you to delete them, skip those files and delete the majority that allows it.
    find and install the FULL FEATURE SOFTWARE if it is available :
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&lc=en&dlc=en&product=3692888
    Install that and let me know the result!
    Have a great day!
    -Spencer
    PS have a wonderful day and a fantastic weekend! 

  • Problem with ticket printer and WPA2

    Hi
    I have a customer that have a couple of Datamax O'neil MP Compact4 MarkII ticket printers. It's two differents batches with different software version, one of them works perfect, but when I tried to configure the others, they just don't want to connect to the wireless. All settings are the same.
    I use WPA2-PSK on the SSID, and it's also spesified on the printer that this is a PSK-SSID. I did run debug client on the controller and it gave me the output under.
    I also tried to run it without any security at all, that worked fine. What I don't understand is why the controller tries to authenticate the client with 802.1x, it's not enabled at all at the controller. Does anyone see something that I don't?
    Controller software 4.2.206,
    Regards,
    Patrick
    Mon Sep 12 13:23:42 2011: 00:40:17:6b:76:6d Creating a PKC PMKID Cache entry for station 00:40:17:6b:76:6d (RSN 2)
    Mon Sep 12 13:23:42 2011: 00:40:17:6b:76:6d Adding BSSID 00:25:46:83:4f:42 to PMKID cache for station 00:40:17:6b:76:6d
    Mon Sep 12 13:23:42 2011: New PMKID: (16)
    Mon Sep 12 13:23:42 2011:      [0000] 78 38 ad 1b a1 5e 1a 75 05 83 49 a3 e3 f5 08 79
    Mon Sep 12 13:23:42 2011: 00:40:17:6b:76:6d Initiating RSN PSK to mobile 00:40:17:6b:76:6d
    Mon Sep 12 13:23:42 2011: 00:40:17:6b:76:6d dot1x - moving mobile 00:40:17:6b:76:6d into Force Auth state
    Mon Sep 12 13:23:42 2011: 00:40:17:6b:76:6d Skipping EAP-Success to mobile 00:40:17:6b:76:6d
    Mon Sep 12 13:23:42 2011: Including PMKID in M1  (16)
    Mon Sep 12 13:23:42 2011:      [0000] 78 38 ad 1b a1 5e 1a 75 05 83 49 a3 e3 f5 08 79
    Mon Sep 12 13:23:42 2011: 00:40:17:6b:76:6d Sending EAPOL-Key Message to mobile 00:40:17:6b:76:6d
                                                                                                        state INITPMK (message 1), replay counter 00.00.00.00.00.00.00.00
    Mon Sep 12 13:23:42 2011: 00:40:17:6b:76:6d Received EAPOL-Key from mobile 00:40:17:6b:76:6d
    Mon Sep 12 13:23:42 2011: 00:40:17:6b:76:6d Ignoring invalid EAPOL version (1) in EAPOL-key message from mobile 00:40:17:6b:76:6d
    Mon Sep 12 13:23:42 2011: 00:40:17:6b:76:6d Received EAPOL-key in PKT_START state (message 2) from mobile 00:40:17:6b:76:6d
    Mon Sep 12 13:23:42 2011: 00:40:17:6b:76:6d EAPOL-key M2 with invalid RSN IE received from mobile 00:40:17:6b:76:6d
    Mon Sep 12 13:23:42 2011: 00:40:17:6b:76:6d Sent Deauthenticate to mobile on BSSID 00:25:46:83:4f:40 slot 0(caller 1x_eapkey.c:907)
    Mon Sep 12 13:23:42 2011: 00:40:17:6b:76:6d Scheduling deletion of Mobile Station:  (callerId: 58) in 10 seconds
    Mon Sep 12 13:23:44 2011: 00:40:17:6b:76:6d Association received from mobile on AP 00:25:46:83:4f:40
    Mon Sep 12 13:23:44 2011: 00:40:17:6b:76:6d STA - rates (8): 2 4 11 12 18 22 24 36 48 72 96 108 0 0 0 0
    Mon Sep 12 13:23:44 2011: 00:40:17:6b:76:6d STA - rates (12): 2 4 11 12 18 22 24 36 48 72 96 108 0 0 0 0
    Mon Sep 12 13:23:44 2011: 00:40:17:6b:76:6d Processing RSN IE type 48, length 20 for mobile 00:40:17:6b:76:6d
    Mon Sep 12 13:23:44 2011: 00:40:17:6b:76:6d 0.0.0.0 8021X_REQD (3) Initializing policy
    Mon Sep 12 13:23:44 2011: 00:40:17:6b:76:6d 0.0.0.0 8021X_REQD (3) Change state to AUTHCHECK (2) last state 8021X_REQD (3)
    Mon Sep 12 13:23:44 2011: 00:40:17:6b:76:6d 0.0.0.0 AUTHCHECK (2) Change state to 8021X_REQD (3) last state 8021X_REQD (3)
    Mon Sep 12 13:23:44 2011: 00:40:17:6b:76:6d 0.0.0.0 8021X_REQD (3) Plumbed mobile LWAPP rule on AP 00:25:46:83:4f:40
    Mon Sep 12 13:23:44 2011: 00:40:17:6b:76:6d apfPemAddUser2 (apf_policy.c:212) Changing state for mobile 00:40:17:6b:76:6d on AP 00:25:46:83:4f:40 from Associated to Associated
    Mon Sep 12 13:23:44 2011: 00:40:17:6b:76:6d Stopping deletion of Mobile Station: (callerId: 48)
    Mon Sep 12 13:23:44 2011: 00:40:17:6b:76:6d Sending Assoc Response to station on BSSID 00:25:46:83:4f:40 (status 0)
    Mon Sep 12 13:23:44 2011: 00:40:17:6b:76:6d apfProcessAssocReq (apf_80211.c:3888) Changing state for mobile 00:40:17:6b:76:6d on AP 00:25:46:83:4f:40 from Associated to Associated
    Mon Sep 12 13:23:44 2011: 00:40:17:6b:76:6d Creating a PKC PMKID Cache entry for station 00:40:17:6b:76:6d (RSN 2)
    Mon Sep 12 13:23:44 2011: 00:40:17:6b:76:6d Adding BSSID 00:25:46:83:4f:42 to PMKID cache for station 00:40:17:6b:76:6d
    Mon Sep 12 13:23:44 2011: New PMKID: (16)
    Mon Sep 12 13:23:44 2011:      [0000] 78 38 ad 1b a1 5e 1a 75 05 83 49 a3 e3 f5 08 79
    Mon Sep 12 13:23:44 2011: 00:40:17:6b:76:6d Initiating RSN PSK to mobile 00:40:17:6b:76:6d
    Mon Sep 12 13:23:44 2011: 00:40:17:6b:76:6d dot1x - moving mobile 00:40:17:6b:76:6d into Force Auth state
    Mon Sep 12 13:23:44 2011: 00:40:17:6b:76:6d Skipping EAP-Success to mobile 00:40:17:6b:76:6d
    Mon Sep 12 13:23:44 2011: Including PMKID in M1  (16)
    Mon Sep 12 13:23:44 2011:      [0000] 78 38 ad 1b a1 5e 1a 75 05 83 49 a3 e3 f5 08 79
    Mon Sep 12 13:23:44 2011: 00:40:17:6b:76:6d Sending EAPOL-Key Message to mobile 00:40:17:6b:76:6d
                                                                                                        state INITPMK (message 1), replay counter 00.00.00.00.00.00.00.00
    Mon Sep 12 13:23:49 2011: 00:40:17:6b:76:6d 802.1x 'timeoutEvt' Timer expired for station 00:40:17:6b:76:6d
    Mon Sep 12 13:23:49 2011: 00:40:17:6b:76:6d Retransmit 1 of EAPOL-Key M1 (length 121) for mobile 00:40:17:6b:76:6d
    Mon Sep 12 13:23:49 2011: 00:40:17:6b:76:6d Received EAPOL-Key from mobile 00:40:17:6b:76:6d
    Mon Sep 12 13:23:49 2011: 00:40:17:6b:76:6d Ignoring invalid EAPOL version (1) in EAPOL-key message from mobile 00:40:17:6b:76:6d
    Mon Sep 12 13:23:49 2011: 00:40:17:6b:76:6d Received EAPOL-key in PKT_START state (message 2) from mobile 00:40:17:6b:76:6d
    Mon Sep 12 13:23:49 2011: 00:40:17:6b:76:6d EAPOL-key M2 with invalid RSN IE received from mobile 00:40:17:6b:76:6d
    Mon Sep 12 13:23:49 2011: 00:40:17:6b:76:6d Sent Deauthenticate to mobile on BSSID 00:25:46:83:4f:40 slot 0(caller 1x_eapkey.c:907)
    Mon Sep 12 13:23:49 2011: 00:40:17:6b:76:6d Scheduling deletion of Mobile Station:  (callerId: 58) in 10 seconds
    Mon Sep 12 13:23:50 2011: 00:40:17:6b:76:6d Association received from mobile on AP 00:25:46:83:4f:40
    Mon Sep 12 13:23:50 2011: 00:40:17:6b:76:6d STA - rates (8): 2 4 11 12 18 22 24 36 48 72 96 108 0 0 0 0
    Mon Sep 12 13:23:50 2011: 00:40:17:6b:76:6d STA - rates (12): 2 4 11 12 18 22 24 36 48 72 96 108 0 0 0 0
    Mon Sep 12 13:23:50 2011: 00:40:17:6b:76:6d Processing RSN IE type 48, length 20 for mobile 00:40:17:6b:76:6d
    Mon Sep 12 13:23:50 2011: 00:40:17:6b:76:6d 0.0.0.0 8021X_REQD (3) Initializing policy
    Mon Sep 12 13:23:50 2011: 00:40:17:6b:76:6d 0.0.0.0 8021X_REQD (3) Change state to AUTHCHECK (2) last state 8021X_REQD (3)
    Mon Sep 12 13:23:50 2011: 00:40:17:6b:76:6d 0.0.0.0 AUTHCHECK (2) Change state to 8021X_REQD (3) last state 8021X_REQD (3)
    Mon Sep 12 13:23:50 2011: 00:40:17:6b:76:6d 0.0.0.0 8021X_REQD (3) Plumbed mobile LWAPP rule on AP 00:25:46:83:4f:40
    Mon Sep 12 13:23:50 2011: 00:40:17:6b:76:6d apfPemAddUser2 (apf_policy.c:212) Changing state for mobile 00:40:17:6b:76:6d on AP 00:25:46:83:4f:40 from Associated to Associated
    Mon Sep 12 13:23:50 2011: 00:40:17:6b:76:6d Stopping deletion of Mobile Station: (callerId: 48)
    Mon Sep 12 13:23:50 2011: 00:40:17:6b:76:6d Sending Assoc Response to station on BSSID 00:25:46:83:4f:40 (status 0)
    Mon Sep 12 13:23:50 2011: 00:40:17:6b:76:6d apfProcessAssocReq (apf_80211.c:3888) Changing state for mobile 00:40:17:6b:76:6d on AP 00:25:46:83:4f:40 from Associated to Associated
    Mon Sep 12 13:23:50 2011: 00:40:17:6b:76:6d Creating a PKC PMKID Cache entry for station 00:40:17:6b:76:6d (RSN 2)
    Mon Sep 12 13:23:50 2011: 00:40:17:6b:76:6d Adding BSSID 00:25:46:83:4f:42 to PMKID cache for station 00:40:17:6b:76:6d
    Mon Sep 12 13:23:50 2011: New PMKID: (16)
    Mon Sep 12 13:23:50 2011:      [0000] 78 38 ad 1b a1 5e 1a 75 05 83 49 a3 e3 f5 08 79
    Mon Sep 12 13:23:50 2011: 00:40:17:6b:76:6d Initiating RSN PSK to mobile 00:40:17:6b:76:6d
    Mon Sep 12 13:23:50 2011: 00:40:17:6b:76:6d dot1x - moving mobile 00:40:17:6b:76:6d into Force Auth state
    Mon Sep 12 13:23:50 2011: 00:40:17:6b:76:6d Skipping EAP-Success to mobile 00:40:17:6b:76:6d
    Mon Sep 12 13:23:50 2011: Including PMKID in M1  (16)
    Mon Sep 12 13:23:50 2011:      [0000] 78 38 ad 1b a1 5e 1a 75 05 83 49 a3 e3 f5 08 79
    Mon Sep 12 13:23:50 2011: 00:40:17:6b:76:6d Sending EAPOL-Key Message to mobile 00:40:17:6b:76:6d
                                                                                                        state INITPMK (message 1), replay counter 00.00.00.00.00.00.00.00
    Mon Sep 12 13:23:50 2011: 00:40:17:6b:76:6d Received EAPOL-Key from mobile 00:40:17:6b:76:6d
    Mon Sep 12 13:23:50 2011: 00:40:17:6b:76:6d Ignoring invalid EAPOL version (1) in EAPOL-key message from mobile 00:40:17:6b:76:6d
    Mon Sep 12 13:23:50 2011: 00:40:17:6b:76:6d Received EAPOL-key in PKT_START state (message 2) from mobile 00:40:17:6b:76:6d
    Mon Sep 12 13:23:50 2011: 00:40:17:6b:76:6d EAPOL-key M2 with invalid RSN IE received from mobile 00:40:17:6b:76:6d
    Mon Sep 12 13:23:50 2011: 00:40:17:6b:76:6d Sent Deauthenticate to mobile on BSSID 00:25:46:83:4f:40 slot 0(caller 1x_eapkey.c:907)
    Mon Sep 12 13:23:50 2011: 00:40:17:6b:76:6d Scheduling deletion of Mobile Station:  (callerId: 58) in 10 seconds
    Mon Sep 12 13:23:52 2011: 00:40:17:6b:76:6d Association received from mobile on AP 00:25:46:83:4f:40
    Mon Sep 12 13:23:52 2011: 00:40:17:6b:76:6d STA - rates (8): 2 4 11 12 18 22 24 36 48 72 96 108 0 0 0 0
    Mon Sep 12 13:23:52 2011: 00:40:17:6b:76:6d STA - rates (12): 2 4 11 12 18 22 24 36 48 72 96 108 0 0 0 0
    Mon Sep 12 13:23:52 2011: 00:40:17:6b:76:6d Processing RSN IE type 48, length 20 for mobile 00:40:17:6b:76:6d
    Mon Sep 12 13:23:52 2011: 00:40:17:6b:76:6d 0.0.0.0 8021X_REQD (3) Initializing policy
    Mon Sep 12 13:23:52 2011: 00:40:17:6b:76:6d 0.0.0.0 8021X_REQD (3) Change state to AUTHCHECK (2) last state 8021X_REQD (3)
    Mon Sep 12 13:23:52 2011: 00:40:17:6b:76:6d 0.0.0.0 AUTHCHECK (2) Change state to 8021X_REQD (3) last state 8021X_REQD (3)
    Mon Sep 12 13:23:52 2011: 00:40:17:6b:76:6d 0.0.0.0 8021X_REQD (3) Plumbed mobile LWAPP rule on AP 00:25:46:83:4f:40
    Mon Sep 12 13:23:52 2011: 00:40:17:6b:76:6d apfPemAddUser2 (apf_policy.c:212) Changing state for mobile 00:40:17:6b:76:6d on AP 00:25:46:83:4f:40 from Associated to Associated
    Mon Sep 12 13:23:52 2011: 00:40:17:6b:76:6d Stopping deletion of Mobile Station: (callerId: 48)
    Mon Sep 12 13:23:52 2011: 00:40:17:6b:76:6d Sending Assoc Response to station on BSSID 00:25:46:83:4f:40 (status 0)
    Mon Sep 12 13:23:52 2011: 00:40:17:6b:76:6d apfProcessAssocReq (apf_80211.c:3888) Changing state for mobile 00:40:17:6b:76:6d on AP 00:25:46:83:4f:40 from Associated to Associated
    Mon Sep 12 13:23:52 2011: 00:40:17:6b:76:6d Creating a PKC PMKID Cache entry for station 00:40:17:6b:76:6d (RSN 2)
    Mon Sep 12 13:23:52 2011: 00:40:17:6b:76:6d Adding BSSID 00:25:46:83:4f:42 to PMKID cache for station 00:40:17:6b:76:6d
    Mon Sep 12 13:23:52 2011: New PMKID: (16)
    Mon Sep 12 13:23:52 2011:      [0000] 78 38 ad 1b a1 5e 1a 75 05 83 49 a3 e3 f5 08 79
    Mon Sep 12 13:23:52 2011: 00:40:17:6b:76:6d Initiating RSN PSK to mobile 00:40:17:6b:76:6d
    Mon Sep 12 13:23:52 2011: 00:40:17:6b:76:6d dot1x - moving mobile 00:40:17:6b:76:6d into Force Auth state
    Mon Sep 12 13:23:52 2011: 00:40:17:6b:76:6d Skipping EAP-Success to mobile 00:40:17:6b:76:6d
    Mon Sep 12 13:23:52 2011: Including PMKID in M1  (16)
    Mon Sep 12 13:23:52 2011:      [0000] 78 38 ad 1b a1 5e 1a 75 05 83 49 a3 e3 f5 08 79
    Mon Sep 12 13:23:52 2011: 00:40:17:6b:76:6d Sending EAPOL-Key Message to mobile 00:40:17:6b:76:6d
                                                                                                        state INITPMK (message 1), replay counter 00.00.00.00.00.00.00.00
    Mon Sep 12 13:23:52 2011: 00:40:17:6b:76:6d Received EAPOL-Key from mobile 00:40:17:6b:76:6d
    Mon Sep 12 13:23:52 2011: 00:40:17:6b:76:6d Ignoring invalid EAPOL version (1) in EAPOL-key message from mobile 00:40:17:6b:76:6d
    Mon Sep 12 13:23:52 2011: 00:40:17:6b:76:6d Received EAPOL-key in PKT_START state (message 2) from mobile 00:40:17:6b:76:6d
    Mon Sep 12 13:23:52 2011: 00:40:17:6b:76:6d EAPOL-key M2 with invalid RSN IE received from mobile 00:40:17:6b:76:6d
    Mon Sep 12 13:23:52 2011: 00:40:17:6b:76:6d Sent Deauthenticate to mobile on BSSID 00:25:46:83:4f:40 slot 0(caller 1x_eapkey.c:907)
    Mon Sep 12 13:23:52 2011: 00:40:17:6b:76:6d Scheduling deletion of Mobile Station:  (callerId: 58) in 10 seconds
    Mon Sep 12 13:23:53 2011: 00:40:17:6b:76:6d Association received from mobile on AP 00:25:46:83:4f:40
    Mon Sep 12 13:23:53 2011: 00:40:17:6b:76:6d STA - rates (8): 2 4 11 12 18 22 24 36 48 72 96 108 0 0 0 0
    Mon Sep 12 13:23:53 2011: 00:40:17:6b:76:6d STA - rates (12): 2 4 11 12 18 22 24 36 48 72 96 108 0 0 0 0
    Mon Sep 12 13:23:53 2011: 00:40:17:6b:76:6d Processing RSN IE type 48, length 20 for mobile 00:40:17:6b:76:6d
    Mon Sep 12 13:23:53 2011: 00:40:17:6b:76:6d 0.0.0.0 8021X_REQD (3) Initializing policy
    Mon Sep 12 13:23:53 2011: 00:40:17:6b:76:6d 0.0.0.0 8021X_REQD (3) Change state to AUTHCHECK (2) last state 8021X_REQD (3)
    Mon Sep 12 13:23:53 2011: 00:40:17:6b:76:6d 0.0.0.0 AUTHCHECK (2) Change state to 8021X_REQD (3) last state 8021X_REQD (3)
    Mon Sep 12 13:23:53 2011: 00:40:17:6b:76:6d 0.0.0.0 8021X_REQD (3) Plumbed mobile LWAPP rule on AP 00:25:46:83:4f:40
    Mon Sep 12 13:23:53 2011: 00:40:17:6b:76:6d apfPemAddUser2 (apf_policy.c:212) Changing state for mobile 00:40:17:6b:76:6d on AP 00:25:46:83:4f:40 from Associated to Associated
    Mon Sep 12 13:23:53 2011: 00:40:17:6b:76:6d Stopping deletion of Mobile Station: (callerId: 48)
    Mon Sep 12 13:23:53 2011: 00:40:17:6b:76:6d Sending Assoc Response to station on BSSID 00:25:46:83:4f:40 (status 0)
    Mon Sep 12 13:23:53 2011: 00:40:17:6b:76:6d apfProcessAssocReq (apf_80211.c:3888) Changing state for mobile 00:40:17:6b:76:6d on AP 00:25:46:83:4f:40 from Associated to Associated
    Mon Sep 12 13:23:53 2011: 00:40:17:6b:76:6d Creating a PKC PMKID Cache entry for station 00:40:17:6b:76:6d (RSN 2)
    Mon Sep 12 13:23:53 2011: 00:40:17:6b:76:6d Adding BSSID 00:25:46:83:4f:42 to PMKID cache for station 00:40:17:6b:76:6d
    Mon Sep 12 13:23:53 2011: New PMKID: (16)
    Mon Sep 12 13:23:53 2011:      [0000] 78 38 ad 1b a1 5e 1a 75 05 83 49 a3 e3 f5 08 79
    Mon Sep 12 13:23:53 2011: 00:40:17:6b:76:6d Initiating RSN PSK to mobile 00:40:17:6b:76:6d
    Mon Sep 12 13:23:53 2011: 00:40:17:6b:76:6d dot1x - moving mobile 00:40:17:6b:76:6d into Force Auth state
    Mon Sep 12 13:23:53 2011: 00:40:17:6b:76:6d Skipping EAP-Success to mobile 00:40:17:6b:76:6d
    Mon Sep 12 13:23:53 2011: Including PMKID in M1  (16)
    Mon Sep 12 13:23:53 2011:      [0000] 78 38 ad 1b a1 5e 1a 75 05 83 49 a3 e3 f5 08 79
    Mon Sep 12 13:23:53 2011: 00:40:17:6b:76:6d Sending EAPOL-Key Message to mobile 00:40:17:6b:76:6d
                                                                                                        state INITPMK (message 1), replay counter 00.00.00.00.00.00.00.00
    Mon Sep 12 13:23:53 2011: 00:40:17:6b:76:6d Received EAPOL-Key from mobile 00:40:17:6b:76:6d
    Mon Sep 12 13:23:53 2011: 00:40:17:6b:76:6d Ignoring invalid EAPOL version (1) in EAPOL-key message from mobile 00:40:17:6b:76:6d
    Mon Sep 12 13:23:53 2011: 00:40:17:6b:76:6d Received EAPOL-key in PKT_START state (message 2) from mobile 00:40:17:6b:76:6d
    Mon Sep 12 13:23:53 2011: 00:40:17:6b:76:6d EAPOL-key M2 with invalid RSN IE received from mobile 00:40:17:6b:76:6d
    Mon Sep 12 13:23:53 2011: 00:40:17:6b:76:6d Sent Deauthenticate to mobile on BSSID 00:25:46:83:4f:40 slot 0(caller 1x_eapkey.c:907)
    Mon Sep 12 13:23:53 2011: 00:40:17:6b:76:6d Scheduling deletion of Mobile Station:  (callerId: 58) in 10 seconds
    Mon Sep 12 13:23:55 2011: 00:40:17:6b:76:6d Association received from mobile on AP 00:25:46:83:4f:40
    Mon Sep 12 13:23:55 2011: 00:40:17:6b:76:6d STA - rates (8): 2 4 11 12 18 22 24 36 48 72 96 108 0 0 0 0
    Mon Sep 12 13:23:55 2011: 00:40:17:6b:76:6d STA - rates (12): 2 4 11 12 18 22 24 36 48 72 96 108 0 0 0 0
    Mon Sep 12 13:23:55 2011: 00:40:17:6b:76:6d Processing RSN IE type 48, length 20 for mobile 00:40:17:6b:76:6d
    Mon Sep 12 13:23:55 2011: 00:40:17:6b:76:6d 0.0.0.0 8021X_REQD (3) Initializing policy
    Mon Sep 12 13:23:55 2011: 00:40:17:6b:76:6d 0.0.0.0 8021X_REQD (3) Change state to AUTHCHECK (2) last state 8021X_REQD (3)
    Mon Sep 12 13:23:55 2011: 00:40:17:6b:76:6d 0.0.0.0 AUTHCHECK (2) Change state to 8021X_REQD (3) last state 8021X_REQD (3)
    Mon Sep 12 13:23:55 2011: 00:40:17:6b:76:6d 0.0.0.0 8021X_REQD (3) Plumbed mobile LWAPP rule on AP 00:25:46:83:4f:40
    Mon Sep 12 13:23:55 2011: 00:40:17:6b:76:6d apfPemAddUser2 (apf_policy.c:212) Changing state for mobile 00:40:17:6b:76:6d on AP 00:25:46:83:4f:40 from Associated to Associated
    Mon Sep 12 13:23:55 2011: 00:40:17:6b:76:6d Stopping deletion of Mobile Station: (callerId: 48)
    Mon Sep 12 13:23:55 2011: 00:40:17:6b:76:6d Sending Assoc Response to station on BSSID 00:25:46:83:4f:40 (status 0)
    Mon Sep 12 13:23:55 2011: 00:40:17:6b:76:6d apfProcessAssocReq (apf_80211.c:3888) Changing state for mobile 00:40:17:6b:76:6d on AP 00:25:46:83:4f:40 from Associated to Associated

    Hi Patrick,
    It looks like that client is actually trying to do wpa vs wpa2:
    Mon Sep 12 13:23:50 2011: 00:40:17:6b:76:6d Ignoring invalid EAPOL  version (1) in EAPOL-key message from mobile 00:40:17:6b:76:6d
    Mon Sep 12 13:23:50 2011: 00:40:17:6b:76:6d Received EAPOL-key in PKT_START state (message 2) from mobile 00:40:17:6b:76:6d
    Mon Sep 12 13:23:50 2011: 00:40:17:6b:76:6d EAPOL-key M2 with invalid RSN IE received from mobile 00:40:17:6b:76:6d
    change/add that wlan to wpa/tkip and see if that works.  if it does, and you've got the ticket printer configured for wpa2, there's a problem with it (maybe it needs to be rebooted for wpa2/aes to take affect? just a guess)

  • Problem with Canon Printer and Leopard

    I have a Canon Ink-Jet (Pixma IP 4200) printer, which, until two days ago was running fine.
    Since then, I've been unable to print on it - either I get the error message that the printer is out of paper, when it isn't, or that the computer cannot connect with the printer.
    I've tried uninstalling the printer, and re-installing it, both with the Canon drivers, and with the Gutenprint ones, but to no avail.
    Not only that, but when the printer is connected via the Canon drivers, either wirelessly, or via USB, then my MacBook fan starts to run all the time, very loudly. Once I delete the printer again, then the MacBook becomes silent within thirty seconds.
    Weird, huh?
    Any ideas????

    Try running a reset printing system. Open System Preferences > Print & Fax. Then hold down the Control key and click your mouse in the Printers list. A menu showing Reset printing system should appear. Click this.
    Now restart your Mac and then add the Canon driver again. Hopefully this gets things working for you again.
    PaHu

  • Problem with Dell Printer and Wireless Router

    I have a new Linksys Wireless Router (3100) and it handles 3 laptops, PS3 fine.  But I have a Dell 715w network printer (also new).  I have it set up on the network, and it works fine upon setup.  The problem is the printer does not work all the time.  Sometimes I can get an error message, sometimes it says it is busy, and other times it literally takes a long time to load and then does not print.  I usually can get it to work again by rebooting and turning off the router and printer and laptops, but this hit or miss is very annoying and I never know when it will do this again, usually after a week or two. I wonder if the problem is that the 3 laptops all have different OS - XP, Vista and Windows 7.  Dell tech support won't help as they say they don't support routers, but I am wondering whether the problem is ina s etting or if this printer is malfunctioning.  any help would be appreciated

    Yes. You have to key-in the IP address to the printer.
    Basically, if the printer is set to obtain IP address from the router, it will be provided with a random IP or any IP available for the next device that will connect, on this issue, your printer. So there's no permanent IP address for the printer, making it a little hard to find at times. Compare it with the a static IP, your computer can easily map it since it doesn't change.

  • Having problems with HP6980 printer and Windows 7, please help

    I just replaced my XP computer with a new HP computer running Windows 7.  Each time I turn on my HP 6980 printer, it won't print.  When I go to Devices and Printers, I see that it is offline.  I have to delete the printer and reinstall it to make it work and this solution is only good for the session.  I have to repeat the process each time that I turn on the computer.  Please help.

    Try running this next time you get the issue:
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-91788-1&lc=en&dlc=en&cc=us&...
    This should fix the offline issue instead of reinstalling.
    I work for HP but my posts and replies are my own thoughts.
    If I have solved your issue, please feel free to provide kudos
    Make it easier for other people to find solutions, by marking my answer with Accept as Solution if it solves your issue.

  • Problem with Epson Printer and Time Capsule

    I have a new Time Capsule, already gone through first backup etc... I tried to connect my 2 month old Epson RX 680 to the TC via USB. I have tried everything and still cannot print wirelessly. I have uninstalled, reinstalled, rebooted both TC and printer, running out of ideas. Any suggestions why I can't print wirelessly?
    BTW, works fine with USB from printer directly into macbook pro.

    I attempted this routine with my Epson R380 and this did not help. I do have a working HO OfficeJet 6210xi working off Time Machine. I'm wondering if an expert with CUPS can help determine the problem from the logs?
    I [07/Feb/2009:23:43:20 -0500] [Job ???] Request file type is application/postscript.
    I [07/Feb/2009:23:43:20 -0500] [Job 12] Adding start banner page "none".
    I [07/Feb/2009:23:43:20 -0500] [Job 12] Adding end banner page "none".
    I [07/Feb/2009:23:43:20 -0500] [Job 12] File of type application/postscript queued by "mikenned".
    I [07/Feb/2009:23:43:20 -0500] [Job 12] Started filter /usr/libexec/cups/filter/pstoappleps (PID 22327)
    I [07/Feb/2009:23:43:20 -0500] [Job 12] Started filter /usr/libexec/cups/filter/pstocupsraster (PID 22328)
    I [07/Feb/2009:23:43:20 -0500] [Job 12] Started filter /Library/Printers/EPSON/InkjetPrinter/Filter/rastertoescp.app/Contents/MacOS/ra stertoescp (PID 22329)
    I [07/Feb/2009:23:43:20 -0500] [Job 12] Started backend /usr/libexec/cups/backend/mdns (PID 22331)
    W [07/Feb/2009:23:43:21 -0500] [Job 12] recovered:
    I [07/Feb/2009:23:43:32 -0500] [Job 12] Completed successfully.

  • Problems with HP Printer and Computer

    Why does my computer fail to connect my printer? The computer says the printer is connected when it is not and the printer spooler keeps disconnecting? Please help.

    Hi @mommacat,
    Welcome to the HP Forums!
    I understand that you are having troubles connecting your HP Deskjet 1010 to your Windows 8 computer. I am happy to help!
    I am assuming you are connecting with a USB 2.0 printer cable, since the printer's specifications states this is the only method of connecting available.
    In the meantime, I would recommend to go through this guide, 'Printer is offline' Message Displays on the Computer and the Printer Will Not Print: Windows 8, and watch this video:
    Hope this helps!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Problem with iphoto, printer, and toast

    Can someone direct me to a discussion on this topic. I seem to have a driver problem or something...when I go to print anything, from any program, said program crashes.
    Toast titanium won't open properly, and then won't even force quit no matter what I do.
    Iphoto won't add to library anymore.
    My Sibelius lost all it's fonts, and I'm sure there are a few more things I haven't even noticed yet. They all happened at the same time which is why I reckon they're all the same problem.
    I'm running an Imac g5, so I know it's old! Also- I cannot locate the original cds that would let me do a reinstallation. Is there somewhere I can get them?
    Oh I hope someone somewhere still running pre intel reads this.
    Colm
    (near Dublin in Ireland)

    Try running a reset printing system. Open System Preferences > Print & Fax. Then hold down the Control key and click your mouse in the Printers list. A menu showing Reset printing system should appear. Click this.
    Now restart your Mac and then add the Canon driver again. Hopefully this gets things working for you again.
    PaHu

  • Pavillion G6. Shrunk C Drive, and formatted the other as I drive. Had some problems with my printe

    I shrank C drive. that left me with another drive, which I formatted as drive I.  The recovery drive is D, as it was when I received the computer.   I had some problems with my printer (Epson) through a Dlink DIR655B1, and wanted to return the computer to factory condition.
    When I try to use the recovery through Windows, it says factory reset is disabled??  When I try to shut down, reboot, and use the bios restore, it just comes up with an error message, says to use the dvd that came with the computer, which it didn't?
    Any way I can put this all back to normal?
    Thanks
    Joe

    517joe wrote:
    I shrank C drive. that left me with another drive, which I formatted as drive I.  The recovery drive is D, as it was when I received the computer.   I had some problems with my printer (Epson) through a Dlink DIR655B1, and wanted to return the computer to factory condition.
    When I try to use the recovery through Windows, it says factory reset is disabled??  When I try to shut down, reboot, and use the bios restore, it just comes up with an error message, says to use the dvd that came with the computer, which it didn't?
    Any way I can put this all back to normal?
    Thanks
    Joe
    You damaged the partition structure when you shrank C, see this guide to properly add a 5th partition after you get it restored using HP recovery media.
    http://h30434.www3.hp.com/t5/Other-Notebook-PC-Questions/How-to-repartition-HDD-of-HP-notebook-with-...

  • I have a problem with color prints from photoshop elements 12. The pictures are too light and with strange colors. I have a Canon pixma mg615I0 printer and use mac os X yosemite. The pictures are taken with a coanon eos 550d in the color space sRGB. I hav

    Hi
    I have a problem with color prints from photoshop elements 12. The pictures are too light and with strange colors. I have a Canon pixma mg615I0 printer and use mac os X yosemite. The pictures are taken with a coanon eos 550d in the color space sRGB. I have followed adobes recommendations and have tried both letting the printer respektive photoshop manage the colors. But nothing works. I see that there are different opinions about which is best to do so I tried both. I have the latest printer driver installed. Can anyone help me with this?

    Do the following:
    Print a test page from the printer. Perhaps the print head needs cleaning via its maintenance facility.
    Let the printer manage colors, not PSE
    Calibrate the monitor

  • I hve pop up from adobe that tell me they have problem with my paiement and billing information and to go in my account or my lisence will stop working in 25 days

    I have pop up from adobe that tell me they have problem with my paiement and billing information and to go in my account or my lisence will stop working in 25 days again... I can't find anything wrong in my account infos. What do I need to check and change? Adobe takes the money directly on my credit card since almost 2 years and I haven't change anything sicne then. The expiration date is good. Also, I'm not able to contact the Adobe support, it's not available.

    ImprimerieModerne, my response of about being unable to find the CC was for Kathy P. The issue that you are facing is being worked upon.
    I am sorry for the confusion.
    Regards
    Rajshree

  • Problem with HP Printer Utility and Mac OSX 10.5.4

    I have a problem with HP printer Utility. When a standard user adds a new paper profile HP Printer Utility asks to type an administrator's name and password to allow HP printer Utility to make changes. Is it possible to avoid this? Otherwise I have to give admin rights to every user because they have to be able to add new papers. HP printer Utility sharing and permisssions are set to read and write to everyone.
    HP designjet Z3200
    MacOSX 10.5.4 (Mac pro intel)
    HP printer utility 3.6.0.

    Just found an email HP Support sent to me back in January 2008, about this issue
    "Hello Hunter,
    Thank you for contacting HP Total Care.
    There currently is not proper driver for 10.5, so it is surprising that the printer is printing correctly on your Mac from any application.
    Your issue cannot be resolved until the 10.5 driver is developed and released.
    To sign up for an update as soon as it is available ...click on the link below:
    HP's subscriber's choice is a free service where you can select to receive timely email notifications ranging from software and driver updates to creative ways to do more with your HP products.
    http://h71036.www7.hp.com/hho/html/3618-0-0-225-121.html
    If you need further assistance, please reply to this message and we will be happy to assist you further.
    You may receive an e-mail survey regarding your e-mail support experience. We would appreciate your feedback.
    For information on keeping your HP and Compaq products up and running, please visit our Web site
    at:
    http://www.hp.com/go/totalcare
    Sincerely,
    Dave
    HP Total Care"
    I just sent them an email today on any updates regarding a release date on the Leopard driver for P1005, i'll post any info i receive.

Maybe you are looking for

  • GX740-079US SATA III support?

    It is hard to find a definitive answer, but my gut feeling says the GX740 support SATA II and not III though certain sites are offering SSD options with the SATA III drives. Does anyone know for if the GX740-079US support SATA III as I am looking to

  • Ipad keynote - using photos

    I am a new iPad user and have started to learn Keynote. It seems fairly intuitive and easy - except that I can't get it to utilize any of my .jpg photos. What am I doing wrong? In a new presentation, I click on the insert media button - go to photo a

  • IPod sync worries

    I haven't been good about authorizing and reauthorizing computers over the years. My daughter has her iPod that is partially synced to this and that computer. She has dropped music on it from iTune Libraries I have had, but we have a problem now beca

  • Music video app?

    Hi i plug my iphone into my car everytime i get in it and i get video on all my monitors like if i watch a movie, but my question is can someone make an app that would play continous music videos like mtv on tv but on the iphone. (yea i know its a li

  • Using iPod classic as a ext. HD

    With Leopard coming out, how well would the new iPod classic work as an external HD for Time Machine? Would it be not as effective because it won't always be plugged in? Or would it work well? any feedback or speculation would be great!