Problems with hp1317 all-in-one printer

I have a Mac OS X snow leopard and an HP 1317 all-in-one printer. Although it says that the printer is ready it still remains idle and won't print. I've checked everything I can think of: unplugged the printer for a while and made sure I have clicked on Resume etc. Please could someone help? Thanks. I did have suggestions from someone and this helped for a while but now having problems again.

Thanks for your suggestions. I've now uninstalled and reinstalled the HP software but am still having the message that there are components missing from the software so I still cannot print my documents. I'm totally baffled and feel like slinging the computer through the window!!! If you havae any more ideas please feel free to pass them on to me.

Similar Messages

What to do with 6310 all in one printer when done with it?

Want to sell, donate, or recycle (in that order) my HP 6310 All-in-one printer. The door no longer shuts and an eror message frequently appears saying "carraige jam". We simply push "OK" and it works. Instead of trying to fix it -- we bought a new printer. So, what do we do with our old printer?
PS - I suspect an HP tech could fix this printer in 2 minutes and a handy computer type could fix it 15 minutes.

Hi @6310endgame, thanks for reaching out to the HP Forums!
If you are still wondering what do do with the 6310 printer I can help. In order;
Sell: You could try on online site and note that is is currently non functional, or maybe post it for parts
Donate: You could take it to a local mom and pop shop, perhaps they should use it for parts to repair another model, or they could repair yours.
Recycle: Take a look at the following link; Product return and recycling.
I apologize for the delay, but I hope this resolves your inquiry!
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Printing/Scanning Problem with HP All-In-One

As you will see, I am a bit confused as to how my Mac is talking to my HP all in one. I am having printing and scanning problems. When I try to print, nothing happens. I go to print status and the print job is there but the printer is not printing. I try pausing, deleting and trying to print again, hold to no avail. It recognizes the job, it just won't print.
Scanning is similar. Most of the time I end up with an error message "The scan cannot be performed because another program has control of the HP imaging device". It directs me to restart the program, close all programs, re-boot the computer. I have done all of these and no go. In addition, no other programs are running at the time.
As far as my computer recognizing the HP, it does in both wifi and bluetooth. I have made it my default printer.
I have a time capsule as a router and everything is set up properly for it. Four bars are shown indicating it is acting properly. Both it and bluetooth are turned on. The HP status lights are on for both wifi and bluetooth.
I have checked with HP and Apple Support and could not find anything that addresses my issue. Please help!!
Thanks

I had a similar problem awhile back with my HP F2210 all-in-one. I basically re-downloaded all of the software for the printer from HPs site. Before re-installing, I did a safe boot. Then, I reinstalled and restarted and all was well. When software update told me there was a new driver available, I installed it and things still worked. I'm able to print, scan, and all the printer is supposed to do without a hitch.

Printing problem with 5610v all-in-one.

After replaceing a print cartridge the printer started printing with a shadow. That is, the print has a second light image before the main character is printed. I do not know why this is happening and I need to change the charicteristics of the printing back to normal. I have cleaned the new cartridge and I have replaced the cartridge. I have also aligned the cartridge but nothing helps. Suggestions will be greatly appreciated. My all-in-one is a little over two years old and I use Windows Vista Home Premium 64 bits.

Try doing this:
1. Unplug the power cord from the back of the printer and from the wall outlet.
2. Wait for a minute or two.
3. Reconnect power cord directly to the wall outlet.
4. While the printer is still unplug from the back, press and hold the pound (#) and six (6) buttons at the same time.
5. While holding the pound (#) and three (6) buttons, reconnect the power cord to the back of the printer and then release the buttons.
6. Turn on the printer if it won't turn on after some time.
7. Follow the instructions on the LCD.
8. Try doing a copy in black after the reset is successful.
Please keep me posted if it works.
Message Edited by smartfriend on 11-25-2008 06:28 PM
Please click on KUDOS if you find my solution helpful.

Mac OS 10.7 printer problem with 6500 all-in-one wireless

HP 6500 all-in-one wirelss: After configuring (and reconfiguring) the printer and exhausting all the troubleshooting steps suggested by HP, I still have the problem of prints stalling in the queue or, alternately, printing very very slowly. Wireless connectivity is "excellent" according to the Wireless Network Test Report. When printing, printer is found, display says "Connected to Printer" then the barber-pole spins and spins and eventually the word "Idle" appears. Any suggestions on how to get printer to work?

This article should help to maintain wireless connection:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02817031&cc=us&dlc=en&lc=en#N101
Give the steps outlined a try and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Problem with Microsoft All-in-One Media Keyboard

Hello,
I found a problem with this keyboard when I was playing game. If I'm holding Shift + W and then i'm pressing D too (to turn right or rather to walk straight and to the right) it doesn't work. This same is happening if I'm holding Shift + D +
W. But other combinations are working, like pressing Shift + W + A or Shift + S + D, etc. First I thougt that it is some game issue or program had keyboard shortcut and it's interfering
with game. But I tried in notepad and it wasn't working too. After all it is not Windows 8.1 issue, because I launched ubuntu live cd and this problem still exist even there.
Now what can I do with it? Go to warranty shop?

Hi,
Did this keyboard hotkeys work previously? Maybe this function only works in specific program or game.
Keep latest driver and software for the keyboard.
According to your description, best choice I think is sending the keyboard to the warranty shop.
Regards
Yolanda Zhu
TechNet Community Support

Problems with HP All-in-One (4280)

Okay, I have a new iMac. I connected my HP printer/scanner. The printer works fine but when I try to use the scanner I get an error message saying there is no USB connection.
I've also tried installing the software and it hangs up at the device setup (final stage) every time.
Anyone have similar problems? Anyone solve it? Any suggestions otherwise?
Thanks,
Todd

I am visiting with my aunt for a few days who has the printer ( and the Mac) -
first question she had was: why does this message come up when Mac starts -->
"HP Photosmart 4280 printer not found in the printer list "
I clicked on the Edit Printer List button... and it was already there -
but knowing that things can get corrupted, I deleted the printer from the list
and told it to add it again -- well, this seemed to work on restart --
but I believe that message is reappearing now whenever she starts the Mac --
wonder if there's an elegant solution to this ...
the 2nd question she had was with printing from the memory card when it is plugged into the printer -- the 4x6 pictures we printed had better color and saturation than when we printed from the Mac -- used the same picture, same paper, everything ... but there was a distinct difference. Anybody else see this yet ?
Thanks
Doc Rock

Hp deskjet ink advantage 2515 all-in-one printer

i bought an hp 2515 all-in-one printer three months ago and encountered a printing problem. i went to the hp support and troubleshooting center here in our city to avail the one year warranty service. they checked my printer and told me that it cant be fixed or repaired, instead they replaced it with another printer but is a different model from what i originally have. is it okay if they replaced my printer 2515 all-in-one with 1515 all-in-one printer because they were out of 2515 all-in-one pirinters?

Generally if a replacement unit having same or higher configuration is not available of the same product series (2515 AIO in your case), then another printer model may be offered.
Please mark the post that solves your problem as Accepted Solution
Click the 'Kudos Thumbs Up' if this was helpful. Thank You!
(Although I am an HP employee, I am speaking for myself and not for HP)

Hp 8600 All in one printer problem with scanning through wired network its very slow!

Hi
i have problem with scanning thru network which takes almost more than 2minutes very slow compared to scanning when printer connected locally with USB. i need some solution to fix this issue. Plz advise me what needs to be done prior to scanning?

Welcome to the community @Larrypat
I understand your printer is not connecting wireless and only connecting USB. I have some questions and ideas for you that should help. Let's get to it!
Could you please remove the USB cable, run the Print and Scan Doctor again and send me a screen shot of the results from running the diagnostic tool?
Also let me know which model from the C7200 series you have:
HP Photosmart C7250 All-in-One Printer
HP Photosmart C7280 All-in-One Printer
HP Photosmart C7288 All-in-One Printer
Try power cycling the network devices:
Turn off the printer and computer and unplug the router for 1 minute (do not press any buttons on the router).
Plug the router back in and wait another minute, next turn on the printer and computer. Run the Print and Scan Doctor afterwards and try printing.
Let me know how it goes and the results
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

I have a brand new hp officejet 6700 premium e-all-in-one printer but my macbook pro is not detecting the printer to even install it or make a print can some one tell me if it is a problem with the printer or the macbook pro?

can some one help me with the question ..

no not at all..it was just tested if it was being detected on a windows os..it did..i am doubting either it is a problem with the router or the macbook pro....but earlier it did connect well to a hp officejet pro 8600 e-all-in-one printer over a different network(at someone else's house)...

Ink Cartridge problem with the 7525 all in one printer

I put all new cartridges in the 7525 all in one printer and it keeps telling me that the cyan cartridge is damaged. also the ink levels on the new cartridges are not appearing full. they are all new HP cartridges.

The troubleshooting steps in the document here may help resolve the issue with your cyan cartridge on your Photosmart 7525 printer.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Power problem with my 4620 all in one printer / scanner / fax

Hi,
My problem is this. I have a 4620 all-in-one printer / scanner / fax. However, I have discovered this problem.
Scenario:
The printer hasn't been used for a day or two but is plugged in still with the light above the power cord on. I want to print a word doc or whatever. I click print. I obtain a message that the computer (via wifi) can't communicate with the printer. Pressing the Power on button on the printer interface doesn't work.
My solution, I have to disconnect the power supply from the printer, then reconnect and then press the Power On button.
This isn't normal I think. I don't think for one minute that I should have to go and disconnect and reconnect the power suppy for it to print etc.
Any ideas?
Thank you in advance!!

maybe here: http://discussions.apple.com/thread.jspa?messageID=11110856&#11110856 ?
found doing a quick search of the forum
all results here: http://discussions.apple.com/search.jspa?objID=c263&search=Go&q=laser+printer
JGG

Problem in Printing with HP Deskjet F370 All-in-One Printer

Product Name and Number: HP Deskjet F370 All-in-One Printer
Cartridge Number: Black - HP 21 Black Inkjet Print Cartridge (C9351AA)
Colour - HP 22 Tri-color Inkjet Print Cartridge (C9352AA)
Operating System Installed: Windows 7 Home Premium (64 Bit)
Hi,
I am using HP Deskjet F370 All-in-One Printer. Recently I am facing a critcal problem.
I am unable to print anything in red or brown colour.
The cartridges are in good condition with more than 80% ink level in color cartridge and 65% above in black cartridge.
I have done alignment of printer cartridges and also reset the printer.
However after that, I have taken a test print which works fine. I can print in black or any other colour expect red and brown.
Whenever I am trying to print anything in brown it is coming out in green colour.
I don't know what to do....Please help.
Thanks
Suvadeep Paul
Thanks
Suvadeep Paul

Hi there,
This article should cover the missing colors you are experiencing. Give the steps located here a shot and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Problem staying connected to my Wireless Network with my HPPhotosmart e-All-in-One Printer - D110a

I just bought a new HP wireless printer replacing my old HP wireless printer which the wireless part worked fine, but the printing died.
New printer HPPhotosmart e-All-in-One Printer - D110a. I have installed and re-installed the software and drivers but can't get my printer to stay connected to my laptop. I have a Linksys "WRT54GL router but have the printer set with a static IP address. When I run tests on the computer and printer everything says it is fine. But every 30 seconds or so.. my printer goes offline on my computer and is especially noticeable when I am using the HP Solution center because it will keep blinking in the windows bar. I have talked to 4 technicians but no one can figure out what the problem is. They keep saying that it is on my end, but the old printer which was also an HP (Wireless 6150) never had any problems and I have not changed anything in my routing. Is anyone else having this kind of problem and has found a successful solution? Any help would be greatly appreciated.
My computer is running Windows XP SP3
Currently my router has WEP encryption, but I tried them all just to see if that had anything to do with it. (WEP works best for me since I have some devices which can only use WEP to communicate).
Thanks.

Let's set a static IP address for the printer:
- Print a Network Config Page from the front of the printer. Note the printer's IP address.
- Type that IP address into a browser to reveal the printer's internal settings.
- Choose the Networking tab, then Wireless along the left side, then the IPv4 tab.
- On this screen you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). Yours is 192.18.1.100 to .149. Let's use 192.168.1.200 for your printer.
- Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
- Enter your router's IP (on the Network Config Page) for the gateway and first DNS. Leave the second one blank.
- Click 'Apply'.
Now, shut down the router and printer, start the router, wait, then start the printer.
After this you may need to redo 'Add a Printer' using the new IP address.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Having problem with my hp officejet j6480 all-in-one printer

i am having problem with my HP officejet j6480 all-in-one printer it prints very slow
the operating system is windows 7 32-bits i download full driver software but that did not fix the problem
This question was solved.
View Solution.

Hi - Does it print slowly from all applications or just certain ones? In either case, you can try following the steps in this document.
In addition, try going into Control Panel, Printer, right click on the printer and choose Printer Properties. Click on the Advanced Tab and select Print Direcly to the Printer.
Hope that helps.
Say Thanks by clicking the Kudos thumbs up. Please mark the post that solves your problem as an Accepted Solution so other forum users can utilize the solution.
I am an HP employee.

Problems with hp1317 all-in-one printer

Similar Messages

Maybe you are looking for