Problems with HR org structure replication
Hello,
EBP 5.0, HR 4.7
we have a big issue where at the moment replication between HR and SRM is not working properly.
We made customizing according to 550055 note and found out that BAdI BBP_OM_BUPA_ALE (note 850328) is active. This prevents to have concurrent employment in SRM org structure.
We can replicate O (units) and S (positions) form HR without problem. But when we try to replicate P (persons) with infotype 0105 filled (users in SRM) afterwards we do not see positions for which users have to be created!!!
IDOCs have information that everything went OK.
Please help!
Gordan
Issue is resolved by SAP, some customizing entries are missed from ECC side
Similar Messages
-
G4 mini has a problem with its volume structure
My G4 mini has a problem with its volume structure according to Tech Tools Deluxe. One that the application can't seem to repair. Ran it 3 times and it always hangs before it completes the fix. Never hangs in exactly the same place in the repair routine, but always hangs.
Ran these tests because for the longest time the mini would accelerate (panic) and shut down. Installation on a new system hangs before it completes the install of all the upgrades. Any help would be appreciated.I realize it was not clear from the original post whether or not DiskUtility had been tried yet to fix the hard drive.
To use DiskUtility to repair the drive, you have to boot from the original install disc that shipped with your Mini.
1) Insert the Install disc and the shutdown the Mini.
2) Restart the Mini and hold down the C key as soon as the startup chime or beep is heard. Hold it down until you see the "gear" spinning on the screen.
3) Select your language, but don't proceed any farther with installation. Use the Utilities menu at the top of the screen to run DiskUtility.
4) In DiskUtility, click once on the hard drive in the left panel, then click on the Repair Disk button in the right panel. -
No Range for CP in SRM 7.0 in case of ECC HR Org Structure replication
Hi Experts,
We have SRM 7.0 , in case of ECC HR Org Structure replication, where we maintan the No Range for CP ( Employee replicated from ECC) in SRM ..I belive it is External ( In ECC it is at PA04 for Employee )?
Thanks
NAPYou need to schedule program RHALENI in Insert mode to achieve the same
Thanks,
Sundeep -
HR org structure replication to SRM
Hi All,
we have done HR org structure replication to SRM, and we found that ORG structure replicated successfully in SRM . We can see it in PPOSA. But we found that Business partner number and Central person is not created for this.
I have followed steps given in this link.
http://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/30139fb0-360c-2a10-1e9f-9d5417754983
When I check IDOC it is posted successfully, when I check segments in IDOC in SRM it is showing personal number of HR, but it is not converted to Bussinesspartner and central person.
Any pointers
Thanks and Regards,
Abdul RaheemIssue is resolved by SAP, some customizing entries are missed from ECC side
-
Questions regarding HR Org Structure replication from ECC to SRM
Hi Experts ,
We have SRM7.0 ( SP08) with ECC6 ( Ehp4) having Classic Scenario .
I managed to replicate entire HR Org Structure from ECC system to SRM system. I replicated O (Organization), S( Postion) and P ( Person), which successfully created O, S and CP in SRM with BP for O and US...Refered Note 934372, 312090, 550055 and help link on SDN./wiki.....etc
Now I have below questions in mind.
1. In SRM we requiers Org unit for Company Code, Purchase Organization and Purchase Group...which we set in FUNCTION tab for the requiered Org Unit with Checkbox and value of it and Logical system.....but in HR Org strcuture we do not have such Org Unit....so how to manage/create such these Org Units ( i.e.Company Code, Purchase Organization and Purchase Group ) ?...
Do I need to create these Org unit manually in SRM in PPOSA_BBP ? If yes, can I create these Org Unit above or between these replicated HR Org Units or I need to created it separtly in paralllel to these HR replicated Org Units?
2. If above I do, then what will impact on the delta /change replication from HR integraion ?
3. In ECC HR org Structure there are hundres of employee, out of that I just wanted to send the Postion ( we have postion based security in HR) whom only SRM Role had assigned . How it can be acheived ?
Will appricaite detail reply/suggestions
Thanks
NAPHi ,
Initially when I repliacted P of HR Org Struture it sucessfully craeted BP in SRM and was CP in Org Structure.
But suddenly , what happned don;t know, when I replicating Employees (P) in SRM , it is assigning to respective Postion (S), but BP is not creating in SRM and in the USERS_GEN for this User, its postion and ORg Unit to whom it assigned is giving below error
Determination of connections to object 'BP' of 'CP' '00000015' failed
Message no. BBP_UM_UI036
I checked all this as per Note 550055, 934372..etc....checked respetcive setting in table T77S0...I checked address alos....but no any clue......IDoC in SRM posting sucessfully....
Can anyone please suggest what should be the cause and solution of it ?
Thanks
NAP -
Hi,
I am interested in finding out what replication method people use to maintain the SRM (SRM 5.0 and ECC 6.0) org structure.
Once the SRM org structure is created via RHALEINI , do you continue executing RHALEINI with the correct options on a nightly basis to maintain or synchronize the SRM org structure or do you use the ERP change documents for the HRMD_ABA message type and only replicate the deltas?
Since both methods work, is there a recommended method?
Thanks,
JerryWe are still on SRM 4 but my guess is that this process hasn't changed. My experience has been that most customers will work from Delta updates once the structure has been initially created, especially when CUA (Central User Admin) is used to manage change in HR.
In our case we run nightly jobs - in R/3 the job contains program RBDMIDOC, which processes Change Pointers created from HR updates and creates IDocs. Following this in SRM we runa job that contains RBDMANI2, whcih processes the IDocs in SRM and updates the Org Structure. These two programs relate to HRMD_ABA. And finally we run HRALXSYNC (this one is still a mystery to me - it doesn't seem to do anything - another story). -
Resource search with "wrong" Org Structure
Hello,
I am using cProjects 4.5.
My org structure is coming from SAP HCM (IDOC HRMD_ABA)
Now i am creating a project with resource-role.
When i want to staff that role with resources i'll use the "resource source" button.
I can search by organisational structure, but here i'll see a part of the structure....not the whole structure i see when i use PPOME.
The dates are right. Which influence this search bij organisational unit?Solved the problem:
OSS NOTE 960556 -
Problem with syntaxes and structures in unicode
1. i have a problem with syntax
this is old syntaxes
TRANSLATE c ...FROM CODE PAGE g1 ... TO CODE PAGE g2
new systems should use this class instead of above
CL_ABAP_CONV_IN_CE
it reads data from a container and converts it to the system format.
my old syntax is TRANSLATE header-id FROM CODE PAGE file_tab-codepage.
i need to change to new one by using above class how to do it
2. I have a structure are_buffer and i am working on upgrade of a old report , i have used a sap predefined structure callled arc_buffer from se11, now when i am using offset in one of the perform statement like
PERFORM read_file USING handle_tab_wa-offset record_len
CHANGING arc_buffer(record_len)
error_handling
p_message.
but the system throws a error called ''the structure arc_buffer(record_length) does not start with character-type field''.
i cannot change the structure becoz its sap standard structure .
how to get out of this.Moderator message - Cross post locked
Rob -
New ECC system with new org structure into existing CRM 7 system
Hi,
We have a situation where we have a current ECC 6 system which distributes organisation structure to a CRM 7 system using ALE (org units, positions, personnel numbers).
We are implementing a new ECC 6 instance as a result of a merger which will have a new org structure, the CRM 7 system remains.
My question is has anyone dealt with a similar situation where a new org structure is distributed into an existing CRM or SRM system? Any lessons you could share? Or tips for how to approach this?
Thanks
MarcYou need to schedule program RHALENI in Insert mode to achieve the same
Thanks,
Sundeep -
Hi,
Whenw e replicate the HR org structure to SRM, how purchasing groups and purchasing organisations are taken care of.
Thanks.Org replication from HR to SRM works fine. You need not create everything in SRM again.
You need to use transaction PFAL
Please refer to this blog
/people/vikash.krishna/blog/2006/10/15/replicating-hr-master-data-part-1
Regards
Azad
Edited by: Azad Tripathi on Aug 11, 2009 8:18 AM -
CATS - Manager need to approve users reporting to him with out ORG Structur
Hi Gurus,
At our client, they did not have any Org Structure. They do not want to implement any Org struture.
They are implenting CATS (ESS). Users enter the Time sheets. Manager will approve the team members who report to him?
Is there any way how managers get ONLY see users reporting to him with out a ORG Structure?
I think we can do this restriction with Personnel Area and Personel Sub Areas but we need built separate role for each manager?
Please let me know if i am wrong.
Thanks,
Kshriram
Edited by: Kshriram on Aug 12, 2009 5:08 AMHi Srinivas,
I'm not sure about MSS. But you can integrate CATS with Project system and achieve this.
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CATS/CATS.pdf
You can get CATS and PS materials
http://help.sap.com/bp_bblibrary/600/html/J12_EN_DE.htm
http://help.sap.com/bp_bblibrary/600/BBLibrary_Start.htm
Hope this helps
Regards,
Brinda L -
Problem with u0093Check org Object" in Transaction EC05
Hi all,
We have created a new distribution channel using transaction EC05 and an existing channel. Everything works fine (at least for now), but when a I try to use the Check org Object (still in transaction EC05) on the newly created channel it gives the following error Errors in foreign key dependencies, with an error log containing the following entries:
List of checked table entries for the organizational object Distribution channel 10
FMFGRODEF Define Reimbursable Orders
Check result: No data found
J_1IBILDET Billing Type Determination - India
Check result: No data found
J_1IDCLSDET Document class Determination - India
Check result: No data found
J_1IEXSRDET Excise / Series group determination
Check result: No data found
PRICAT_UNITS PRICAT outbound: Transferable units of measure (Customizing)
Check result: No data found
The list is quite long.
I would like to know what the problem is? Why doesnt it happen with the channels already customized? And how to solve it? Thank you in advance<b>Hi all,
if you have creates the new channel in copy with another (EC05).
verifie if you have the same divisions in both distribution channel.
otherwise. you have to eliminate superfluous divisions.
Then try to use the Check org Object in EC05 .
that will solve the problem .</b> -
I have the following problem:
I want that the structure from the TRUE case of the bigger case structure to start only when I switch from the button and activate the TRUE position. I observed with the probe tool that the structure is still executed in backgroun even if the bigger case is on FALSE. I want to make it start from the first position (the default case) of the inner case structure whenever I will switch from the button. I hope I made myself cleared. Thanks
Solved!
Go to Solution.
Attachments:
Untitled 3.vi 77 KBHi maryus,
your observation (or better assumption) is wrong.
As long as you set your button to FALSE the inner case structure in the TRUE case is not executed!
But: when you switch to TRUE case you wired the loop iterator to the inner case selector. So the inner case structure is not starting with it's first case but with the case corresponding to loop iteration count!
You can see all this by using execution highlighting!
Btw. when you have several cases in a case structure you can combine them to one case. It's all explained in the context help of the case structure! So you can combine cases (1, 3,4,6) and (2,5,7) into just one case each…
Edit: Damn, Christian was faster (with same conclusions)…
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome -
Problem with Office document structure when exporting in Windows vs full-text indexing in SQL Server
Post Author: Atarel
CA Forum: Exporting
Product: Crystal Report for .Net 2005Version: distributed with VS 2005Patches Applied: hot fix crnet20win32x86_en_chf.zipOperating System(s): Win2000 Pro SP4, WinXP SP2, Win 2003 Server SP1, Win 2003 Server SP2Database(s): SQL Server 2000, SQL Server 2005Error Messages: None
We are creating reports with Crystal Report for .Net. We both have a Windows and a Web application connecting to our database. The problem occurs only with the Windows application. We create a report and in the dialog that appears, we choose to export the report in MS Word format. Everythinglooks fine because after we save the document, MS Word is able to open and display the document. However, when we decide to add this Word document in the database in a table that has a image column bound to a full-text indexing schema, that document is never indexed. After fiddling around for a few hours, we realized that the Word document produced during the export is not a true Word document but rather a RTF document that was given a ".doc" extension. Is there a way to have a real Word document when exporting in Windows. The problem does not arise in Web because when we export, the report is displayed in Internet Explorer through the Office plugin. The Office plugin knows how to same a real Word document.
There is also a problem when exporting to Excel in Windows. It does not yield the same structure as in Web. The format of the export in Windows is not compatible with the Office IFilter of SQL Server 2000/2005, therefore the content is not available for search queries.
Any patches to fix this problem?
Regards,
Ian PerreaultPost Author: Atarel
CA Forum: Exporting
Product: Crystal Report for .Net 2005Version: distributed with VS 2005Patches Applied: hot fix crnet20win32x86_en_chf.zipOperating System(s): Win2000 Pro SP4, WinXP SP2, Win 2003 Server SP1, Win 2003 Server SP2Database(s): SQL Server 2000, SQL Server 2005Error Messages: None
We are creating reports with Crystal Report for .Net. We both have a Windows and a Web application connecting to our database. The problem occurs only with the Windows application. We create a report and in the dialog that appears, we choose to export the report in MS Word format. Everythinglooks fine because after we save the document, MS Word is able to open and display the document. However, when we decide to add this Word document in the database in a table that has a image column bound to a full-text indexing schema, that document is never indexed. After fiddling around for a few hours, we realized that the Word document produced during the export is not a true Word document but rather a RTF document that was given a ".doc" extension. Is there a way to have a real Word document when exporting in Windows. The problem does not arise in Web because when we export, the report is displayed in Internet Explorer through the Office plugin. The Office plugin knows how to same a real Word document.
There is also a problem when exporting to Excel in Windows. It does not yield the same structure as in Web. The format of the export in Windows is not compatible with the Office IFilter of SQL Server 2000/2005, therefore the content is not available for search queries.
Any patches to fix this problem?
Regards,
Ian Perreault -
SRM Org Structure Replication From HR
Dear All,
We are in the process of Integrating the HR org into SRM.
1) Done the ALE settings.
2) Model view for message type HRMD_ABA created and distubuted, created from the template.
3) Basic settings done in T770s in SRM table.
4) Executed PFAL to push the objects.
5) Idocs generated in the SRM to create only Org units and positiosn,But CP and users are not created.
Outcome:
Org units and positions are transferred to the SRM, but the CP and User assignment not done in SRM.
HRALS-USRAC = X. Not sure why the CP and USer is not assigned.
With this setiings I think we need not create users in SAP, as the user info from HRinfo type 0105 , Stype 00001 should be copied on to create CP in SRM
We are in SRM 7.0 with ECC 6.0.
Pls advise.
Regards
HarishDear Customer,
This inquiry would really fall under the BC-BMT-OM-ALE component. It might be best to open a thread under this component.
Information i have found for you on this is as follows. I hope it might help you a bit.
This issue occurs because the intial distribution has not been done
correctly. Please review the way to distribute HR datas :
1- Using transaction PFAL, sending the objects C, O, S successively in
Update mode with the infotypes 1000, 1002 and 1028 only, without
using evaluation paths (all existing objects).
=> The objects will then be created without relationship, and no
error must be reported.
2- Using transaction PFAL, sending the object P in Update mode.
=> As the structure objects are already present, no error message
must be generated. If some are, please analyse them, and correct them
before the next step.
3- Using transaction PFAL, sending the objects C, O, S successively in
Update mode (without restrictions, or only the infotype 1001).
=> The relationships which were not sent in step 1 are then
distributed.
4- The changes pointers can now be activated and processed, as the
initialization has been done (steps 1 to 3).
Hope it helps,
Kind Regards,
Edel.
Maybe you are looking for
-
How to tell if a movie is a reference after the fact and components issue..
Hello, I am unsure if a quicktime movie I made is self-contained or a reference movie. It is not playing and I was told I need components to play it (though I am not sure which ones) .... but what got me thinking is I looked at the data size in the i
-
PSE 9 raw works on on Vista PC but not on XP PC
I purchased PSE 9 about a year ago. I love the raw editing capabilites and the little window that the raw files open in on my Vista PC. I also installed PSE 9 on my netbook as the liscense said I could install on up to 2 computers. The problem howeve
-
hi , Can anybody explain me the sep-by-step process for getting the material master using BD11- PULL approach. I had already configured the Distribution model for sending the request MASFET in system B, from which we are requesting the material maste
-
Screen capture video flickers . . .
I have screen capture footage from a client that's a .wmv file: 1024x768 15fps Square pixels Progressive When I create a DVD from the footage I get occasional flicker. This isn't just the "thin horizontal lines" issue that I'm well aware
-
Fileupload component loose selected file information.
I am using a JSF upload component to store images on the server side. Therefore, I add an upload tag and a simple button to my test JSP. The button should only refresh the page by calling the action method with a return value null. <snip> <ui:upload