Problems with html content in box

Hi! I have a problem with html content. For example photoswipe. If I import the folder with the index.html of photoswipe as an article all works fine. If I link it trough the folio overlay creator/webcontent) into a box in indesign dps, it stays empty. Seems like it doesnt find the images/paths??
Klaus

This sounds familiar. PhotoSwipe doesn't seem to like working in a web content overlay unless the JavaScript and other source files are uploaded within HTMLResources. This means editing your local HTML file so that paths to the JavaScript, images and CSS files begin by pointing to HTMLResources virtual folder (../../../HTMLResources/) before their subfolder and filenames. It's worth a try.

Similar Messages

Error message in .docx : 'Open XML file cannot be opened because there are problems with the contents. Details Unspecific error Location: 2'

I have put a lot of work into a docx document on my Mac, but now can't open it as it gives the error message: 'the Open XML file cannot be opened because there are problems with the contents. Details, Unspecific
error, Location: 2'
When opening the original file the message said: 'this file contains word 2007 for Windows equations' etc. but I managed to track changes fine, and saved, closed and re-opened it numerous times without problem. Some graphs seemed moved, and various formulas
were illegible, but no other weirdness was observed.
I have microsoft 2008 installed on my Mac OS X version 10.6.8.
I've tried to fix it using various solutions suggested here, but am afraid am too IT illiterate to have had any luck, please help I'm new to all this!
I've uploaded it to https://www.dropbox.com/s/hkw9k6lyihzoxpc/SittwayPauktawSQUEACREPORT_KD%2BCH.docx

Hi,
This issue is related strictly to oMath tags and occurs when a graphical object or text box is anchored to the same paragraph that contains the equation.
Please use the "Fix it" tool in the following KB article to resolve the problem. See:
http://support.microsoft.com/kb/2528942
Hope this helps.
Regards,
Steve Fan
TechNet Community Support

Document Creation error - "We're sorry. We can't open document name because we found a problem with its contents"

Morning Friends,
I have created a SharePoint 2010 "Site Workflow" that is designed to take information from a form and create a Word doc with the gathered information and store this Word doc in a document library.
I am using Sharepoint 2013 with Office 2013
I understand there are a lot of steps (19) outlined below and I can provide more information as needed but the bottom line is this, workflow successfully takes info from an initiation form, uses the info to create a Word doc. Places this Word doc in a library.
When attempting to open / edit doc, receive error
"We're sorry. We can't open <document name> because we found a problem with its contents"
Details - No error detail available.
Any info or advice would be greatly appreciated.
Very high level view of what I have done:
1 - Created content type called "Letters"
2 - Added site columns " First Name" and "Last Name"
3 - Created and saved to my desktop a very basic Word document (Letter.docx) that says "Hello, my name is XXXX XXXX"
4 - In the advanced settings of the "Letters" content type I uploaded this "Letter.docx" file as the new document template.
5 - Created a new document library called "Letters"
6 - In Library Settings - Advanced Settings, clicked "Yes" to enable the management of content types.
7 - Then I clicked "Add from existing content types" and added the "Letters" content type
8 - Back in the advanced settings of the "Letters" content type I selected "Edit Template" and replaced the first XXXX with the Quick Part "First Name" and the second XXXX with the Quick part "Last Name"
9 - Created a new 2010 Site workflow called "Create a Letter"
10 - To the workflow I added the action "Create List Item"
11 - Configured the action to create Content Type ID "Letters" in the document library "Letter"
12 - For the "Path and Name" I gave it a basic name of "Letter to"
13 - The next step was to create the Initiation Form Parameters and added to form entries "First Name" and "Last Name"
14 - I then linked the initiation form fields to the data source "Workflow Variables and Parameters" to their respective Field from Source parameters
15 - Went back to the "Path and Name" and modified the basic name of "Letter to" to include the first and last name parameters.
16 - Saved - published and ran the work flow.
17 - As expected, Initiation Form prompts for First and Last Name. ("John Doe") Then click "start
18 - Go to document library "Letters" and see a new Word document created titles "Letter to John Doe"
19 - Go to open / edit the Word document and receive the following error
thoughts? Any info or advice would be greatly appreciated.

See this MS support article for SP2010 workflows and generating Word docs:
https://support.microsoft.com/kb/2889634/en-us?wa=wsignin1.0
"This behavior is by design. The Create
List Item action in the SharePoint
2010 Workflow platform can't convert Word content type file templates to the correct .docx format."
I've had success in using SP 2013, Word 2013 (saving a .docx as the template instead of .dotx for the document library content type), and an SP 2010 workflow using SP Designer 2013.

Problem with HTML viewer

Dear All ,
I am facing a problem with HTML Viewer . My senario is as follows :
1. I have created one HTML page . On that page there are 4 Images
2. I imported that HTML page in SAP with the help of transaction SMW0
3. I Called that HTML page in my ABAP program using the method "load_html_document" of class cl_gui_html_viewer
4. This is happening perfectly ok on the machine on which all this developement was done.
But the issue is when I execute my ABAP program on a different machine , those Images on that HTML page are not displaying.
Can you please guide me how to remove that machine dependancy?
Regards,
Nikhil

Hi Nikhil,
Please check if the image is properly imported properly. Also check if there is any option which you might have forgotten while imported like dependeency.
Regards
Abhii...

Problem with File Content Conversion

Hi All
I am facing a problem with file content conversion.
This is my sample file structure:
Header_Record (Occurance - 1)
Field1 in Header
Field2 in Header
Item(Occ-1 to n)
Field3 in Item
Field4 in Item
<<ItemType>> (Structure in Item) (Occ - 0 to n)
<<Field5>> in ItemType
<<Field6>> in ItemType
<<ItemTypeCategory>> (Structure in ItemType)(Occ - 0 to n)
<<<<Field7>>>> in ItemTypeCategory
<<<<Field8>>>> in ItemTypeCategory
Footer_Record (Occurance-1)
Field9
Field10
There is a key field 'Type' in all the above records with unique value in each record.
Now, I defined Field content conversion as follows:
Recordset Structure: Header_Record,1,Item, * , ItemType, * ,ItemTypeCategory, * ,Footer_Record,1
Recordset Sequence: Ascending
KeyField Name: Type
Following are parameters defiled:
Header_Record.Keyfieldvalue: 00
Header_Record.fieldseperator: ,
Header_Record.fieldnames: Field1,Field2
Header_Record.endseperator: 'nl'
Item.keyfieldvalue: 05
item.fieldseperator: ,
item.fieldfieldnames: field3,field4
item.endseperator: 'nl'
ItemType.keyfieldvalue: 10
itemType.fieldseperator: ,
itemType.fieldfieldnames: field5,field6
itemType.endseperator: 'nl'
ItemTypecategory.keyfieldvalue: 15
itemTypecategory.fieldseperator: ,
itemTypecategory.fieldfieldnames: field7,field8
itemTypecategory.endseperator: 'nl'
Footer.keyfieldvalue: 20
Footer.fieldseperator: ,
Footer.fieldfieldnames: field5,field6
Footer.endseperator: 'nl'
Now, i pass the following file:
00,111
05,222
10,333
15,444
20,555
What i expect out of my FCC is this (Sample output to show the hierarchy of field values):
00,111
05,222
<<10,333>>
<<<<15,444>>>>
20,555
But, I am getting this output (Hierarchy is missing. All the structures are in the same order without hierarchy):
00,111
05,222
10,333
15,444
20,555
Field values are being identified according to field content conversion, but, the hierarchy of the fields is missing.
Can you please tell me how should i change my FCC config?
Sorry for this long question.
Many Thanks
Chandra
Edited by: Chandra Sekhar H on Jan 30, 2009 7:10 PM
Edited by: Chandra Sekhar H on Jan 30, 2009 7:16 PM
Edited by: Chandra Sekhar H on Jan 30, 2009 7:17 PM

You will always get a flat structure from FCC. If you want hierarchichal strucuture, you have to create a target and map. You will get only like -
Root
--Recordset
Group1
Fields
Grop2
Fields
Group3
Fields
VJ

Problem with file content conversion in receiver file adapter

Hi All
I have a problem with file content conversion in receiver file adapter.
This is my recordset structure: Header_Record,1,Claim_Record,*,Check_Rec,1
These are the content conversion parameters:
Header_Record.fieldSeparator = ,
Header_Record.endSeparator = 'nl'
Claim_Record.fieldSeparator = ,
Claim_Record.endSeparator = 'nl'
Check_Rec.fieldSeparator = ,
Check_Rec.endSeparator = 'nl'
In SXMB_MONI, i can see that the data is correctly extracted from proxy, and correctly mapped to receiver message, and i see a checkered flag (success).
But, Adapter status is RED with the following error message:
Conversion initialization failed: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found: Parameter '1.fieldFixedLengths' or '1.fieldSeparator' is missing
In communication channel monitoring, i get the following error message:
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Channel has not been correctly initialized and cannot process messages
What is going wrong here? Can anyone please tell me?
Thanks
Chandra

Posted in Incorrect forum.
Posted again in Process Integration forum

The file .docx cannot be opened because there are problems with the contents in sharepoint document library

I created a site and created a document libarary and assigned a word document as a content type . I have written a workflow to create a new document . The workflow is working fine and all the document is getting created and values are getting stored
in it .
As per my requirement I am saving the above site as site template .
After that I am creating a new site based on the above site template , Its getting created and I started the workflow , its working fine and the document is also getting created .
The problem is I am getting error while opening the word document
Error - The file filename.docx cannot be opened because there are problems with the contents .
Details - No error details availble .
Indresh

What are you doing within the txt document? Is it general text and string based items, or have you something more elaborate going on?
An older discussion here elaborates a bit more on the dotx vs docx side of things.
http://social.msdn.microsoft.com/Forums/en-US/de1b5ff9-ea6d-460c-a707-8c28acd4906f/error-opening-office-open-xml-file-when-using-sd-workflow-to-create-item-in-document-library?forum=sharepointcustomizationlegacy
Steven Andrews
SharePoint Business Analyst: LiveNation Entertainment
Blog: baron72.wordpress.com
Twitter: Follow @backpackerd00d
My Wiki Articles:
CodePlex Corner Series
Please remember to mark your question as "answered" if this solves (or helps) your problem.

My ipod uses 10.2 software, but iphone5 wants 10.7version, will this pose any problems with the content currently in itunes?

my ipod uses 10.2 software, but iphone5 wants 10.7version, will this pose any problems with the content currently in itunes if I downloand straight from itunes.com?

Your content is stored locally on your computer, when you update, it will not mess with your content at all.

"The file .docx cannot - problems with the contents."

Word 2007 file HELP!
I started a paper this morning and saved it as normal, however when I try to reopen it I get the following messege: The file .docx cannot be opened because there are problems with the contents. Does anyone know how to resolve this issue?

Hi,
Please check if this applies:
http://support.microsoft.com/kb/2528942
Regards,
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Cannot open Word File because "there are problems with the contents"

Hi Everyone,
I cannot open Word File because "there are problems with the contents" unspecified error; Location: 2. Please help as I need this doc for work meeting this morning. Nothing special about this doc but links were copied into it??? However I do that all the time. I have never had this happen before. I am on a 2010 machine. I just ran a disk permissions repaired and emptied the trash but still no dice. I had several other word docs up as well when I got up this morning but they are all fine. I do not have Time Capsule turned on (which I need to do but that will be another thread/question).
Thank you,
sb

Ok, I found a way to open this but not sure what happened to begin with and the formatting setup is different now, almost like text editor? Not sure what happened here but hope it doesn't happen again?

PHDS - problem with the content license

Hi, I have just enabled the basic phds settings in my httpd.conf (ie not the PHDSCommonKeyFile / PHDSPlaybackExpiration / PHDSOutputProtection / PHDSVideoEncryptionLevel) settings:
<IfModule jithttp_module>
<Location /hds-vod>
 HttpStreamingJITPEnabled true
 JitFmsDirPath ".."
 HttpStreamingContentPath "/full/location/to/content"
 HttpStreamingJITConfAllowed false
 EncryptionScope server
 ProtectionScheme phds
 Options -Indexes FollowSymLinks
</Location>
</IfModule>
And whilst when hitting the video_bitrate.mp4.f4m file i get the expected xml back with the drmAdditionalHeader element, when I view it in the adobe multibitrate hds player i get the error "There was a problem with the content license., plesae contact your video service provider" - has anyone seen this before?
Thanks

Hi, the "adobe multibitrate hds player" is the one you see on the http://server:8134 home page.
I installed 4.5.3 from scratch and left all the defaults with the exception of EncryptionScope server & ProtectionScheme phds - the http error log showed the below when visiting http://server:8134 - [Mon Oct 01 08:34:18 2012] [debug] mod_headers.c(756): headers: ap_headers_output_filter()
The player does say in the bottom right "This video content is DRM protected" and the crossdomain.xml exists and looks like:
<cross-domain-policy>
<allow-access-from domain="*"/><site-control permitted-cross-domain-policies="master-only"/>
</cross-domain-policy>

Problem With File Download Dialog Box

Hi all,
I have jsp page that allows a user to export oracle data to excel.
I have these code in my page:
<%@ page contentType="application/vnd.ms-excel" %>
response.setContentType ("application/vnd.ms-excel");
response.setHeader ("Content Disposition",
"filename=\"historicalrate.xls\"");
I run the page and it popups a file download dialog box with Open and Save buttons.
When I click the Save button a Save As window opens with a hr.xsl file name and Microsoft Excel Workbook(*.xls) as save type. It is what I want.
The problem I have is when I click the Open button on the file download dialog box it displays data in excel format on a browser well. Then I click File > save as on browser's tool bar the Save As window pop up with no file name and a default Text(tab delimited)(*.txt).
I need the file name and Microsoft Excel Workbook(*.xls) as default save type.
Any help would be greatly appreciated.
Please help
Thanks

I have the same problem with hui_ling.
When user click on "Open", Excel start and open excel file correctly but the file name on excel title bar. 'Cause the file name is in Japanese characters. Any one can help me?
Message was edited by:
TNTVN

Problems with HTML in 11g

Got 11g up and running without too much difficulty (Win2003) but I'm having trouble getting HTML content to render. For example, create a simple analysis, add a narrative view, check the "Contains HTML Markup" button, and put HTML in there, but it comes out escaped anyway?
I couldn't find much mention of this in the docs, other than the usual about XSS hardening. I verified that I have the "Save Actions containing embedded HTML" and "Save Content with HTML Markup" privileges - just to make sure, I even granted them to AuthenticatedUsers.
Any ideas?

Hi All,
It seems like this problem is specific to the "Narrative View". If I try the following in the "Static View" it works like expected;
<hr size="15" width="100%" shade align="right">
In the "Narrative View" I did not get it to work yet.
Cheers,
Daan Bakboord
http://obibb.wordpress.com

Problems With Quicktime content from Apple website

Hi
I have problems visualizing various sections of the Apple website that contains quicktime content. (Safari thinks Quicktime is not installed)
for example can't see shuffle giuded tour
http://www.apple.com/ipodshuffle/guidedtour/tour/large.html
or the video for the iphone os 3.0
http://events.apple.com.edgesuite.net/0903lajkszg/event/index.html
from the safari error console i can see there are runtime javascript errors on calls to
'AC.Detector', whose result is non an object, as you can see here
http://i40.tinypic.com/1jb1qc.jpg
http://i42.tinypic.com/15ejrb9.jpg
Any idea?
Thanks
PS: i have no problems with quicktime from other websites, or from other parts of
Apple.

i don't know
it could be an issue with something else, maybe iTunes
look here
http://discussions.apple.com/thread.jspa?messageID=8689671&#8689671
same issue with 'AC.Detector' (I don't know what that is)
i have not had problems with Apple quicktime content in the recent past (same Safari 4 Beta)
i installed iTunes 8.1 recently

Junk characters display while using multipart with html content in Javamail

Hi All,
I have used Java mail API to send mail with attachment. To enable to attachment in mail and to do content formatting i have used multipart and html content type together.
My web application runs on apache tomcat 5.5 in MAC server. Java version is 1.5.
The Function which i have used for sending mail with attachment is as follows:
public void sendmailAttached(String to,String from,String host,boolean debug,String mailContent,String mailSubject,String cc,String attachFiles)
 String mailarray[]=to.split(";");
 Properties props = new Properties();
 //props.put("mail.smtp.port","425");
 props.setProperty("mail.smtp.host", host);
 if (debug) props.setProperty("mail.debug", ""+debug);
 Session session = Session.getInstance(props, null);
 session.setDebug(debug);
 try {
 Message msg = new MimeMessage(session);
 msg.setFrom(new InternetAddress(from));
 javax.mail.internet.InternetAddress[] toAddress=new javax.mail.internet.InternetAddress[mailarray.length];
 for (int i=0;i<mailarray.length ;i++ )
 toAddress=new javax.mail.internet.InternetAddress(mailarray[i]);
 msg.setRecipients(Message.RecipientType.TO, toAddress);
 msg.setSubject(mailSubject);
 try{
 String ccaray =cc;
 String mailarray1[]=ccaray.split(";");
 javax.mail.internet.InternetAddress[] CCAddress=new javax.mail.internet.InternetAddress[mailarray1.length];
 for (int i=0;i<mailarray1.length ;i++ )
 CCAddress[i]=new javax.mail.internet.InternetAddress(mailarray1[i]);
 msg.setRecipients(Message.RecipientType.CC,CCAddress);
 }catch(Exception ss)
 System.out.println("CC mail exception is ====>"+ ss.getMessage());
 msg.setSentDate(new java.util.Date());
 Multipart multipart = new MimeMultipart("related");
 BodyPart messageBodyPart = new MimeBodyPart();
 messageBodyPart.setContent(mailContent, "text/html");
 multipart.addBodyPart(messageBodyPart);
 String fileName = attachFiles.substring(attachFiles.lastIndexOf("/")+1,attachFiles.length());
 if(!fileName.equals(""))
 messageBodyPart = new MimeBodyPart();
 DataSource source = new FileDataSource(attachFiles);
 messageBodyPart.setDataHandler(new DataHandler(source));
 messageBodyPart.setFileName(fileName);
 multipart.addBodyPart(messageBodyPart);
 msg.setContent(multipart);
 Transport.send( msg );
 catch(MessagingException mex)
 Exception ex = mex;
 if (ex instanceof SendFailedException)
 SendFailedException sfex = (SendFailedException)ex;
Address[] invalid = sfex.getInvalidAddresses();
if (invalid != null) {
if (invalid != null) {
for (int i = 0; i < invalid.length; i++)
System.out.println("Invalid Addresss --------> " + invalid[i]);
try
 Message msg = new MimeMessage(session);
 msg.setFrom(new InternetAddress(from));
 Multipart multipart = new MimeMultipart("related");
 BodyPart messageBodyPart = new MimeBodyPart();
 messageBodyPart.setContent(mailContent, "text/html");
multipart.addBodyPart(messageBodyPart);
Address[] validUnsent = sfex.getValidUnsentAddresses();
javax.mail.internet.InternetAddress[] toAddress=new javax.mail.internet.InternetAddress[validUnsent.length];
if (validUnsent != null) {
for (int i = 0; i < validUnsent.length; i++)
System.out.println("Valid Address ------>"+validUnsent[i]);
String test = validUnsent[i]+"";
toAddress[i]=new javax.mail.internet.InternetAddress(test);
msg.setRecipients(Message.RecipientType.TO, toAddress);
msg.setSubject(mailSubject);
String fileName = attachFiles.substring(attachFiles.lastIndexOf("/")+1,attachFiles.length());
 if(!fileName.equals(""))
 messageBodyPart = new MimeBodyPart();
 DataSource source = new FileDataSource(attachFiles);
 messageBodyPart.setDataHandler(new DataHandler(source));
 messageBodyPart.setFileName(fileName);
 multipart.addBodyPart(messageBodyPart);
msg.setContent(multipart);
Transport.send( msg );
catch(Exception e)
 System.out.println("Mail Not Send");
 else
 System.out.println("Mail Server Not Connectd ");
This code is working properly and i am able to send mail with attachment and html formatted content without any problem. But console of server is filled up with too much junk characters because of which the catalina.out file of tomcat server is becoming fully filled.
Sample cosnole display with junk characters are as follows:
Subject: HBSP - DRUCKER - QC - CH16 - QC R2 Completed
MIME-Version: 1.0
Content-Type: multipart/related;
 boundary="----=_Part_34_15681668.1247471518887"
------=_Part_34_15681668.1247471518887
Content-Type: text/html; charset=us-ascii
Content-Transfer-Encoding: 7bit
Hi, Chapter CH16 in the project DRUCKER is Completed . Comments : Qc Accepted. Thanks, ANTONY.
------=_Part_34_15681668.1247471518887
Content-Type: application/octet-stream; name=9420317_CH06_p084-119.pdf.zip
Content-Transfer-Encoding: base64
Content-Disposition: attachment; filename=9420317_CH06_p084-119.pdf.zip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 this display of junk characters are filling up multiple pages of console file.
Can any one suggest me how to overcome this problem?
Many thanks in advance.

There is no "sendmail" method in the JavaMail API.
The debug flag is set using the Session.setDebug method, or by setting the Session property "mail.debug".
If you're using someone else's helper classes with JavaMail, they may provide another way to set it.

Problems with html content in box

Similar Messages

Maybe you are looking for