PROBLEMS WITH IAS10g (9.0.4) SPANISH INSTALATION...BE AWARE!!!!!!!!!!!!!

I don't if it's a bug but if you try to install IAS 10g (9.0.4) on Solaris 9 (SPARC) in Spanish language, once the system tries to read the file ias.properties an error returns 'cause there's a mistake translating this file.....
Instead, when writing the text Caché Web for WebCache the problem is fixed...
Be aware with this!!!!
Best Regards

Refreshing the post...

Similar Messages

Hi i'm using iphone 4 and i have problem with viber apps while i'm installing

hi i'm using iphone 4 and i have problem with viber apps while i'm installing & registration process its says error on system mainternance. can you please help me out?
thank you.

OK, let's try again. Wind is NOT a supported carrier. In order to use tethering, it must be supported and activated by your carrier for the iPhone. This usually involves an additional fee. You will have to ask your carrier if they can enable it. Odds are, since they are not a supported carrier, they can not. If you want to use tethering, you will most likely have to switch to a supported carrier that offers this feature on the iPhone.
A list of supported carriers can be found here: http://support.apple.com/kb/ht1937

Hi i have a white screen problem with my macbookpro mid2009 15".I installed a ifixit battery and i think it screwed up one owc ssd drive.I just installed a new one and at 13min battery left it shut down and then all i got was a white screen...

Hi i have a white screen problem with my macbookpro mid2009 15".I installed a ifixit battery and i think it screwed up one owc ssd drive.I just installed a new one and at 13min battery left it shut down and then all i got was a white screen...I tried every feasible command and all i got was some more white lol.I dont have my tools to open the case right now but do you guys think my cpu board is done?

Have a look at this help document for suggestions that you haven't tried yet:
http://support.apple.com/kb/TS2570

I have a problem with IOS 7 when I am installing app on App Store. I must read and accept new terms and condition. However, I read all new terms that I don't see Agree button to accept. Can you check help me this problem?

I have a problem with IOS 7 when I am installing app on App Store. I must read and accept new terms and condition. However, I read all new terms but I still don't see "Agree" button to accept. Can you check help me this problem?

If it says 'Open' in the App Store, then it's on your device. What happens when you press the 'Open' button in the App Store?
The App is on your phone, somewhere. Use Spotlight to find it, or you can reset your Home Screen layout, and then you'll definitely find it.

Just wondering if anyone has a problem with accessing iTunes store. have iTunes installed but can't bring up the store home page?

Just wondering if anyone has a problem with accessing iTunes store. have iTunes installed but can't bring up the store home page?

i have the same problem! Safari won't work either. Can anyone help please? I have completely restored my computer trying to fix this and it still won't work! I have a 2 month old alienware laptop running windows 7

Having many problem with wifi....after installing lion......

Having many problem with wifi....after installing lion......it connect with wifi but not with Internet and at the same time iPad 2, iPhone 4 works smooth......help......I have MacBook air without thunderbolt and mac mini

I had the same problem last night. Boot into OSX and reboot the router - fine. Boot into Windows and wrong. Here were my fixes:
Firstly, I kept all the settings on my router solid. Just leave them as they are. Boot into OSX and check the Network settings and make a note of your IP address and the router's IP address.
Second, boot into Windows, then open up your wireless connection settings and navigate through to the properties where you can set the IP address.
Third: Set the IP address to your routers IP address changing the last set of digits to a value between 5 and 255 (I have 8 devices so I set the last two digits to 10.) This will keep the IP static.
Tab through the Mask settings to default those.
Then set the default gateway to your router's IP address.
Check that the Network Adapter's setting has IPv6 disabled (uncheck the box)
Finally: Set the primary DNS server to 8.8.8.8 then the secondary to 8.8.4.4 and then reboot the router.
That's what got my connection running.

Having a problem with Add-ons I did not install and now can't uninstall.

Lately I have experienced problems with re-directing and other issues with Mozilla. I looked in my add-ons list and there are several things there that i did not add manually. (I have been having much trouble with ITunes and noticed a plug in in mozilla and want to know if it is necessary.) Is there a way to keep this from happening? I have been using mozilla for years and liked it when I could do a basic install without any add-ons that I did not request. Here is a list of the things that are troubling me - I am sure a few may be necessary. I would appreciate any help anyone can give me with this?
PLUG-INS-
Java Deployment Toolkit 6.0.200.2 NPRuntime Script Plug-in Library for Java(TM) Deploy
Java (TM) Platform SE 6 U20 6.0.200.2 Next Generation Java Plug-in 1.6..0_20 for Mozilla Browsers
Mozilla Default Plug In
(THESE LAST THREE ALL CAME UP AS UNIDENTIFIED PLUG-IN ON MOZILLA PLUG IN CHECK SITE)
Itunes Application Detector 1.0.1.1
Itunes Detector Plug-In
Wacom Dynamic Link Library 1.1.0.3
Wacom Dynamic Link Library
Windows Presentation Foundation 3.5.30729.1
Windows presentation foundation (WPF) plug-in for Mozilla Browsers
EXTENSIONS_ Java Console 6.0.23
Java Console 6.0.20
(Just curious with these two Java consoles - which by the way I am unable to uninstall - the uninstall button is grayed out. and I can only disable.)
Really frustrated with this, I have already uninstalled Firefox and re-installed it - losing all my bookmarks and these add-ons were there after the re-install. PLEASE HELP!

For camera problem try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
I do not understand what you mean about your update problem

Problem with adobe flash player, it's installed but doesn't work....

I have Windows 7 - Internet Explorer 9 with both 32 and 64 - 32 being the main one used.
It's 4 months old and has worked beautifully up till a couple of days ago when trying to get into Mathletics website it tells me Javascript is diabled. Please turn on Javascript to access Mathletics website, then it comes up with
Mathletics Minimum Requirement
To view this website, Flash Player 9 or above is required. You can download the latest one for free from Adobe by clicking the image below:
We haven't touched Flash Player or Javascript so I don't know why all of a sudden this has happened after using it without any problems for 4 months.
Anyway I've checked all the suggestions re Internet Options Security (custom level etc) and checked Internet Options Programs manage add-ons, and checked under ?Help that we're running IE (without 64bit showing). I've uninstalled and reinstalled the current Flash Player version several times, and when I check http://www.adobe.com/software/flash/about/ it shows I have version 10,3,181,34 installed, I've even copied across from my last backup the version which worked before these problems. I've also uninstalled and reinstalled Java.
Can someone please help.
thanks
Maria T
New Zealand

thanks for the explanation.
I think I will leave ActiveX Filtering enabled. I have added the mathletics webiste to my restricted sites (tools, internet options, security, restricted sites) and have changed the custom level to ActiveX Filtering disabled, and I have also changed the (top right hand corner) content filtering to read "no content is filtered on this site".
Is this ok that I do that?
However, it hasn't rectified my problem.
I see there are quite a few people that seem to be having the same or similar problem with Windows 7 / IE9 and Flash Player, is it possible there's a bug?
Yes I do have Citrix installed, will contact them about that problem - thanks.
Thanks
Maria

Problem with OCI call and how to install and use 'DEBUG_EXTPROC' on Linux

Hi,
Can any one let me know how I can install and use this debug_extproc package. I have installed oracle XE server on Linux machine(32-bit).
When I use : DEBUG_EXTPROC.STARTUP_EXTPROC_AGENT' ... i get an error saying that : it is not declared.
I tried looking in all the directories but did not find the dbgextp.sql(which is required in order to install that package).And tried searching on google but could not get any relevant information.
Also I am newbie to OCI call interface and also to C programming too: I have coded a external procedure or custom user aggregate in C. But since I was using C++ : 'set' STL. I have compiled my program using g++ instead of gcc and I have correspondingly modified the make file in public/demo directory.
So, is it fine to do it that way: using OCI (instead of OCCI(C++)) but again compiling the pgm as a regular C++ using g++ instead of gcc.(But rest of the pgm including printf statements : everything is in C).
Also I have created the library from my : custagg.so library:
SQL> create or replace library custagg is '$ORACLE_HOME/lib/custagg.so'
But my aggregate function implemented as external C function using OCI is either not recognised or else : if recognized then there is some error because of which i am getting the following errors : ORA-06522
SQL> select MinDistance(TT) from egg1;
select MinDistance(TT) from egg1
ERROR at line 1:
ORA-06520: PL/SQL: Error loading external library
ORA-06522: /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/lib/custagg.so:
cannot dynamically load executable
Please kindly answers my queries and trying to resolve this for almost 4 days now and could not find any clue on how to get this done.
Thanks,
-NN

#/bin/make
# Make file for OCI,OCCI and ODBC demos
# Usage :
# For compiling & linking the cdemo81.c file
# make -f demo_xe.mk buildoci CDEMOEXE=cdemo81 CDEMOOBJS=cdemo81.o
.SUFFIXES: .o .c .cpp
ICINCHOME=$(ORACLE_HOME)/rdbms/public/
ICLIBHOME=$(ORACLE_HOME)/lib
ICLIBPATH=-L$(ICLIBHOME)
THREADLIBS=-lthread
CCLIB=$(ICLIBPATH) -lclntsh $(THREADLIBS)
OCCILIB=$(ICLIBPATH) -locci -lclntsh $(THREADLIBS)
CCINCLUDES = -I$(ICINCHOME)
CCFLAGS=$(CCINCLUDES) -D_REENTRANT -g -xs
LDFLAGS=
SO_EXT=.so
EXTLDFLAGS=$(LDFLAGS) -shared
REMOVE=rm -rf
MKLINK=ln
MAKE=make
MAKEFILE=demo_xe.mk
CDEMOEXE=custagg.so
CDEMOOBJS=custagg.o
OCCIDEMO=occidml
OCCIOBJDEMO=occiobj
OTT=$(ORACLE_HOME)/bin/ott
OCCIOTTUSR=hr
OCCIOTTPWD=hr
ODBCDEMOEXE=odbcdemo
ODBCDEMOOBJS=odbcdemo.o
AQDEMOEXE=ociaqdemo00
AQDEMOOBJS=ociaqdemo00.o
EXTDEMO=extdemo2.so
CC=/usr/bin/g++
echo "LIBCLNT value is :" $(LIBCLNT)
echo "CC value is :" $(CC)
.c.o:
g++ -c -I$(ICINCHOME) $(CCFLAGS) $<
all: clean buildoci
echo "LIBCLNT value is :" $(LIBCLNT)
buildoci: $(LIBCLNT) $(CDEMOOBJS)
g++ -o $(CDEMOEXE) $(LDFLAGS) $(CDEMOOBJS) $(CCLIB)
echo "CC value is :" $(CC)
echo "LIBCLNT value is :" $(LIBCLNT)
clean:
$(REMOVE) $(CDEMOOBJS) $(CDEMOEXE)
# This port-specific file is currently empty on Solaris. Product
# lines may use this file to override compiler definitions and
# flags used in occi.mk.
# Linux compiler definitions
CC=/usr/bin/gcc
cc=/usr/bin/gcc
CCFLAGS=$(CCINCLUDES) -DLINUX -D_GNU_SOURCE -D_REENTRANT -g
LDFLAGS=-g
# This macro CCINCLUDES has to be redefined on Linux because of
# the existence of the 'new' directory in t_work. The name new
# clashes with a system header file.
CCINCLUDES = -idirafter .
THREADLIBS=-lpthread
ifdef BUILD_CCC296
CC=/usr/bin/g++296
endif
And I am executing the make file using the command :
make -f demo12.mk buildoci CDEMOEXE=custagg.so CDEMOOBJS=custagg.o
I am not getting any error while running this make file.
Can you please tell me whether PLSQL/Oracle is able to locate the file or not. Incase, if it is locating the file but due to some error in the custagg.so it is throwing that error. If this is the case, is there any way that i can debug the C program .....how can i install the debug_extproc package.. I am really new to C & OCI ... if the custagg.so is being located then there might be some problem with the way I am dynamically allocating memory to some variables.
Please kindly reply to this Post/response.
Please let me know if you also want to see my program code.
Thanks & Regards,
-NN

Problem with system Inactivity/Idle time after installing Lion.

Since installing Lion strange things have been happening.
While I was happily editing a text file in TextMate and interacting with the Terminal, my screen saver started. I could only get rid of it by clicking on it, keyboard interaction didn't seem to clear it.
Adium was sending lots of updates to MSN to try and update my friendly name, which was causing issues with MSN sending errors back.
After unlocking 1Password and starting to look for a username/password the application would then lock itself.
I have since disabled my screen saver, which has not appeared again. I have updated the preferences in Adium to not change my status based on system idle time, although the dock icon for it permanently displayed the Idle sign. I have also updated the preferences in 1Password to prevent auto-lock after n minutes.
Since changing these preferences I have not had any problems with the applications, however this isn't ideal. As soon as I revert these changes my problems come back.
Has anyone else had this sort of issue? Does anyone know what might be causing my system to believe that it is idle, when I am clearly interacting with it?

If I delete the existing xml file and set the file path to the desktop, the script works again. However it doesn't work if the applescript is called by another program. This seems to indicate that the XML portion if fine, but that there is some sort of new file permission level control in applescript that wasn't there before that is preventing me from viewing the file. Any further ideas?
Cheers

I want to remove an add on becauase I've been having problems with FIrefox locking up since I installed. How the heck does one remove an add-on. I hate to be stupid but I cannot figure out how to uninstall an add on

I've been having problems with Firefox 4.0 locking up pretty much since I installed it. I did add a few add-ons and all I can think of to do is to remove them. I can't figure out how to get rid of them.

Well, When I click on Add-ons I don't get a list of add-ons. AN Add-ons tab opens which shows lots of other great add-ons but I can't get a list os ones that I've installed and have no option to remove. I'm on version 4.0. Maybe the "remove" as described is for an earlier version?
Nevermind, figured it out. Had to click on "Extensions" on the left side of the page to get the list
Thanks

Password problem with Word since 10.6.4 installed

Using mac os x 10.6.4 and office mac 2004 updated (student).
I have a word document that I have been using for 5 years with a password. Now it cannot be opened because 'this document is protected by a password with a number (chiffrement) method that is not available in this country'. I have the password, but no access to enter it.
Same problem with back-ups of this document on other supports!!!!!
Any hint anybody?
Jean

Ma femme m'a suggéré d'essayer d'ouvrir le document sur le vieil iBook. Ça a fonctionné. J'ai entré le mot de passe, le docu s'est ouvert. J'ai enlevé le mot de passe et je suis revenu ici sur le MacBook et tout fonctionne. J'ai réinstallé le même mot de passe et ça fonctionne.
J'ai donc récupéré mon document avec mes 5 années de textes. Youppi!
Merci
Jean

TS3212 i saw the file download security window and did enter run, it only gets so far and then a window pops up that says there is a problem with the download and can't install. what do I do?

I did see the security download window and entered "run", but it only got so far and a window popped up saying "problem with download, can't proceed". What to do?

This happened to me, too. If I remember correctly, I had to set wither iTunes or my computer to download files one at a time instead of all at once. I don't remember how I set it to do this, though. I also remember that I had to delete the files and downloads and restart them all after I did this. Sorry I couldn't help more.

Printing problem with HP LaserJet Printer since Mavericks Installed

Hello,
I'm working on iMac and I have recently installed OSX Mavericks.
I have now printing troubles with my printer HP LaserJet P1102w.
Sometimes it prints, sometimes it doesn't.
When it doesn't print I often need to suppress the file in the printer task and then print again. And there it works.
I have tried to solve the problem by installing all the HP drivers, and also made a Reset printing system, but it does'nt change anything.
Any Idea ?
Thank you for any help.
François

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select
/var/log ▹ cups ▹ error_log
from the hierarchical list on the left side of the Console window. If you don't see that list, select
View ▹ Show Log List
from the menu bar. Then select the messages from the time of the last failed printing attempt. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.

Problem with black screen and crashes after installing windows 7 and bootcamp

K, so I partitioned my internal HD using Bootcamp, installed a new copy of Windows 7 Home, put in my Mac OSX disk and installed the additional stuff. I can successfully log in to Windows and open the browsers I have installed: Comodo dragon and Mozilla FF. McAfee auto installed with FF and I have Comodo Antivirus installed.
However, within minutes of use, my screen goes black, the computer does not shut down and reboot, I have to press the power button and wait a few secs for it to shut down then reboot. This has happened from both browsers while in Windows on Facebook in a game; while trying to save an attachment from an email via webmail and also while checking the inbuilt Windows settings for the display.
The latter produced the following report (below) on reboot and when I hit the "look for a solution" button, the actual window vanished after a few secs.
2 additional bits of info which may or may not be related:
a) running windows troubleshooter I discovered I have prob with:
driver for Inter (r) 5 series /3400 series chipset Family USB Universal Host Contoller - 3B3B
- I Googled this and it seems a common prob. Tried the reinstall, didn't work, so disabled it as suggested on some of the forum posts.
b) The OSX side of my computer seems to run fine most of the time, tho I have had the odd back screen, then wait, press reboot to power on and off in past as related in this post last month: https://discussions.apple.com/thread/4844797 (maybe a kernal panic..???)
Would anyone know what is causing these probs or what I can do about them? My computer is no longer under warranty and the couple of times I had probs while it was, I was told the probs were to do with the power supply and given a new one, I'm not sure if they looked at the logic board. The OSX side has also had an ongoing prob to do with sudden shrinkage of the image content, which I mentioned to the geniuses at the Apple store b4, but as it wasn't acting up there they couldn't do anything about it... ( looks as tho sm1 changed the screen resolution and whatever is in the browser window shrinks, tho desktop, is never effected - if that makes sense!.)
All in all tho, does make me wonder if the prob is based in the graphics switching..???
Problem signature:
Problem Event Name:    BlueScreen
OS Version:    6.1.7601.2.1.0.768.3
Locale ID:    2057 Additional information about the problem:
BCCode:    333
BCP1:    0000000000000001
BCP2:    0000000000000002
BCP3:    0000000000000003
BCP4:    0000000000000004
OS Version:    6_1_7601
Service Pack:    1_0
Product:    768_1 Files that help describe the problem:
C:\Windows\Minidump\032413-20872-01.dmp
C:\Users\KittyH\AppData\Local\Temp\WER-166952-0.sysdata.xml Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409 If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

When booting up hold down the option key and pick the Mac startup disk. To make it automatic, once in your Mac side go to preferences, startup disk and pick the Mac disk. Next time you boot up it will boot up to Mac OS.

PROBLEMS WITH IAS10g (9.0.4) SPANISH INSTALATION...BE AWARE!!!!!!!!!!!!!

Similar Messages

Maybe you are looking for