Problems with ibus in KDE

I have some weird problems regarding ibus in KDE. Ibus cannot capture input in LibreOffice and some Java Apps (like Freemind and Netbeans, but ibus works with Eclipse). Strangely though, when i start up konsole and type the command to open libreoffice and those Java Apps, ibus works!
I don't know what's going on at all!!!

I on behalf of my daughter see same for Firefox.
Other programs are good, but I couldn't test if it's a problem related with java.

Similar Messages

Problems with suspend in KDE [SOLVED]

Hello,
I am unable to suspend from the Lancelot/Kickoff menus. The Suspend to Ram and Suspend to Disk buttons do the same thing as the Lock Session button (lock the session). Suspend works fine if I type pm-suspend in the terminal. I'm using a Toshiba laptop.
Any ideas will be greatly appreciated.
Last edited by darkwillow (2010-03-20 21:23:52)

Update: Suspend works fine now. I don't know which update fixed it, but it works.

[SOLVED] kde 4.6 and Udisks mounting problems with Dolphin

Hello,
I have a problem with Dolphin in KDE 4.6 where it displays my non-Arch partitions (a / and /home used for Opensuse) as well as a CD-Rom or usb if inserted, but registers an error when I click on the device/partition icon. Specifically, I get the following error displayed at the bottom of Dolphin:
An error occurred while accessing Hard Drive, the system responded: org.freedesktop.UDisks.Error.Failed: Error creating mount point: No such file or directory.
Because of this error, I am unable to mount usb pendrives, access CDs, or access the non-Arch partitions. I'm not sure if this is a KDE error or if it related to Arch as I never encountered this error running KDE 4.6 in Opensuse.
My daemons running in /etc/rc.conf
DAEMONS=(syslog-ng dbus networkmanager netfs crond alsa kdm)
My /etc/fstab
#/dev/cdrom /media/cd auto ro,user,noauto,unhide 0 0
#/dev/dvd /media/dvd auto ro,user,noauto,unhide 0 0
#/dev/fd0 /media/fl auto user,noauto 0 0
/dev/sda1 / ext4 defaults,noatime 0 1
/dev/sda5 swap swap defaults 0 0
/dev/sda6 /home ext4 defaults,noatime 0 1
tmpfs /tmp tmpfs defaults,nodev,nosuid,mode=1777 0 0
tmpfs /var/lock tmpfs defaults,nodev,nosuid,noexec,mode=1777,size=10M 0 0
tmpfs /var/run tmpfs defaults,nodev,nosuid,noexec,mode=0755,size=10M 0 0
Now, I don't have hal running as a daemon as I have read that it is no longer needed in KDE 4.6. Similarly, I don't have my CD-Rom drive mounted as I read in the udev wiki that Udisks automatically mounts devices and partitions. The wiki also indicates that Udisks is supposed to require little configuration.
I've searched the forum and Google, and I have not been able to find any information documenting a Dolphin and UDisks mounting error in KDE 4.6.
I installed KDE through the # pacman -S kde command, but is there some other package that I need to install in order to get Udisks working properly?
Thanks.
Last edited by Bordee (2011-03-24 16:09:25)

When I enter $ groups in a terminal I get the following
sys adm disk lp wheel games video audio optical storage power users
So I'm definitely part of the storage group.
I think I found a solution. I created a /data mountpoint in fstab and a /data folder in my root directory. Now, I'm able to mount and access the contents of the /home partition from Opensuse. The reason I wanted to do this was to access music and photos and transfer them onto my Arch /home partition.
I uncommented the cdrom, dvd, and fd0 devices in fstab and I created /media/cd, /media/dvd, and /media/fl. After inputting a # mount -a, my CDROM drive reads properly as does my USB.
So once again, thank, you for pointing me in the right direction.
One final thought. I was under the impression from reading the UDisks information that it automatically detected and mounted other partitions and devices without them being explicitly mounted in fstab. Was the assumption wrong? In other words, for UDisks and Dolphin to work together properly in KDE 4.6, do all of the devices that appear have to first be mounted in fstab?

Problem with kde and sound

Hi!
I've a problem with KDE and sound.
When KDE shows a alert the alert's sound sounds with delay. 3-5 seconds.
Same happens with kde start.
Can anybody help me?
Thanks!

Pilli wrote:
Hi!
I've a problem with KDE and sound.
When KDE shows a alert the alert's sound sounds with delay. 3-5 seconds.
Same happens with kde start.
Can anybody help me?
Thanks!
Change the player to mplayer or something in the control panel (Sound and Multimedia - System notifications - Player Settings).

Problem with SystemTray on FC5 KDE

Hello!
I'm trying to use new Java6 feature - SystemTray.
There is problem with it on my Fedora Core 5 in KDE - system tray icon simply goes crazy (it appears and disappears, mainly disappears :( , sometimes it is moving on system tray in random direction). There are no problems in GNOME.
In my opinion there may be two reasons for this:
- my KDE is not configured properly;
- Java SystemTray support for [FC5] KDE is not fine.
Any ideas?
Thanks in advance
Message was edited by:
Andriy_Tsykholyas

I already know, what is the problem:
there is bug in Java 1.6 - system tray does not work in KDE 3.5.* :(
It should be fixed in Java 1.7 b02.

Strange problem with kde 4.12 suggestions

Hi, i have a strange problem with kde 4.12, with the video below is much simple to explain, any idea?
https://drive.google.com/file/d/0B7vmSq … sp=sharing

Some of us experienced crashes after 4.11 update. I am not sure if this is related to your case or not but downgrading some packages solves the issue.
https://bbs.archlinux.org/viewtopic.php?id=168667
https://bbs.archlinux.org/viewtopic.php … 3#p1315493
Last edited by omeringen (2013-09-02 20:13:32)

[solved] kde without arts - problem with aplay/knotify

Hi,
I finally got convinced to switch of arts for kde. Amarok runs much better now but I face a problem with knotify/aplay.
With arts not active knotify won't play sounds anymore. knotify is the program responsible for kde's bells and whistles, like playing a sound when you open or close a window etc.
knotify specifies an option for an external player, which I think is the thing to use in case you don't use arts.
I configured that option to use aplay, the sound replay program provided by alsa. However, that has problems. Many kde sounds come with 8khz sample frequency. If I play one of these sounds with aplay their playback frequency is much to low and the sound is heavily distorted. It seems the downmixing does not work.
If I use aplay -Ddmix or -Dduplex I get following error:
Playing raw data 'KDE_Beep.ogg' : Unsigned 8 bit, Rate 8000 Hz, Mono
aplay: set_params:857: Sample format non available
I think that may have something to do with my .asoundrc or maybe there is another program to use for sound playback I don't know about. Also, I could be that knotify IS supposed to play the sounds even without arts running and something else is wrong.
Here is my .asoundrc, any advice is welcome:
# Set default sound card
# Useful so that all settings can be changed to a different card here.
pcm.snd_card {
type hw
card 0
# Allow mixing of multiple output streams to this device
pcm.dmix {
type dmix
ipc_key 1024
slave.pcm "snd_card"
slave {
# This stuff provides some fixes for latency issues.
# buffer_size should be set for your audio chipset.
period_time 0
period_size 1024
buffer_size 16384
bindings {
0 0
1 1
# Allow reading from the default device.
# Also known as record or capture.
pcm.dsnoop {
type dsnoop
ipc_key 2048
slave.pcm "snd_card"
bindings {
0 0
1 1
# This is what we want as our default device
# a fully duplex (read/write) audio device.
pcm.duplex {
type asym
playback.pcm "dmix"
capture.pcm "dsnoop"
# CONVERSION PLUG #
# Setting the default pcm device allows the conversion
# rate to be selected on the fly.
# duplex mode allows any alsa enabled app to read/write
# to the dmix plug (Fixes a problem with wine).
pcm.!default {
type plug
slave.pcm "duplex"
# Apparently this is wrong (breaks mplayer for me opening the device)
#ctl.!default {
# type plug
# slave.pcm "snd_card"
# AOSS #
# OSS dsp0 device
pcm.dsp0 {
type plug
slave.pcm "duplex"
# OSS control for dsp0 (needed?...this might not be useful)
ctl.dsp0 {
type plug
slave.pcm "snd_card"
# OSS control for dsp0 (default old OSS is mixer0)
ctl.mixer0 {
type plug
slave.pcm "snd_card"
Cheers,
Dominik

Ok, I came to a solution.
My .asoundrc was ok. It was aplay that I wasn't aware of it couldn't handle .ogg files, it tried to play it anyway and that's why I got garbled sound output *headdesk*
I installed alsaplayer, after running it once I edited .alsaplayer/config to use the "text" user interface by default. Setting alsaplayer as external player for knotify seems to work.
However, knotify won't let me play sounds in quick succession, so I lose a knotify sound every now and then.

Problems with Kde Devil (Bluetooth)

Hi!
I have a very strange problem with Kde Devil. When you open any part of the program I get the cancel button covering most of the window. It is impossible out of the way and when pressed, it cancels everything. I take two Screenshots:
It happens with KDE4. Is there any way to solve it?
Thank you so much

Well, I think I fixed it. I had to tell my phone to forget the headphones, then restart my phone and start all over from scratch. I really hope I don't have to do this every day.

KDE 4.10 - Problems with Plastik window theme

There seems to be several problems with the Plastik window decoration theme in KDE 4.10:
* When switching between windows the window decoration flickers several times and takes about a second to update the colours
* The font baseline is too high
* The button positions are messed up
It does not seem to affect any other themes.
It has worked perfectly in all previous 4.x releases.

There is a bug report about this:
https://bugs.kde.org/show_bug.cgi?id=314532

Hal, usbdisk, kde - a problem with /media/* directory

Hello,
I am havng a problem with my usbdisk. At first it's mounted at /media/sda1, then during hibernation (kernel23archck, hibernate-scripts, suspend to disk) the script unloads usb modules. When I start the computer again my usbdisk becomes /media/sdb1 and the previous directory becomes empty. Is it possible to force hal to mount my usbdisk always in the same directory e.g. /media/usbdisk ???
Thanks in advance.
mdv

I have a similar problem, when ever I put in an usb pin in mounts it first as sda1, but if I take it out and put it in again, it mounts as sdb1, and sda1 is still mounted in the media directory, so now I have both sda1 and sdb1 mounted, although the sda1 directory is empty.
Why doesn't hal unmount the usb pin after I take it out?

Trouble with ibus+libreoffice but not with ibus+openoffice-base

I've been having this problem with libreoffice ever since the switch. I use ibus with the following settings:
XMODIFIERS="@im=ibus"
GTK_IM_MODULE="ibus"
KDE_IM_MODULE="ibus"
but if I launch libreoffice the application doesn't respond to any keyboard events, even shortcuts (i.e. ctrl+Q). In addition the ibus-daemon process starts taking up full CPU time. I've tried setting "xim" instead of "ibus" but when I do that I can type, but the characters don't get "committed."
I've just installed openoffice-base and this time ibus works as intended.

Jodell wrote:Does the fix in this thread work? https://bbs.archlinux.org/viewtopic.php?id=112433
Yes it does, thank you.
quoting for posterity, boldface mine:
darehanl wrote:
@gorudonu
Just a quick question. Do you happen to use KDE? Try adding this line:
export OOO_FORCE_DESKTOP="gnome"
to $HOME/.xprofile . Adding that fixed the problem for me (although you get ugly GNOME file dialogs). Looks like the new KDE integration code added to libreoffice is the culprit.

Problems with Steam - Dota2 and ETS2

Hello
I had never problems with Arch + xfce but last time I made fresh install of Arch with KDE and problems begins. Strange logs in steam running Dota 2 and Euro Truck Simulator 2. Dota 2 freezing, jumping even 60+ fps, both games can freeze for 1 min with sound.
Lenovo Y580 - GTX660M
After running Dota 2 with launch options (optirun -b primus %command% -console) output from console:
Game update: AppID 570 "Dota 2", ProcID 1441, IP 0.0.0.0:0
ERROR: ld.so: object '/home/akikyo/.local/share/Steam/ubuntu12_32/gameoverlayrenderer.so' from LD_PRELOAD cannot be preloaded (wrong ELF class: ELFCLASS32): ignored.
ERROR: ld.so: object '/home/akikyo/.local/share/Steam/ubuntu12_32/gameoverlayrenderer.so' from LD_PRELOAD cannot be preloaded (wrong ELF class: ELFCLASS32): ignored.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
ERROR: ld.so: object '/home/akikyo/.local/share/Steam/ubuntu12_32/gameoverlayrenderer.so' from LD_PRELOAD cannot be preloaded (wrong ELF class: ELFCLASS32): ignored.
pid 1455 != 1454, skipping destruction (fork without exec?)
ERROR: ld.so: object '/home/akikyo/.local/share/Steam/ubuntu12_32/gameoverlayrenderer.so' from LD_PRELOAD cannot be preloaded (wrong ELF class: ELFCLASS32): ignored.
ERROR: ld.so: object '/home/akikyo/.local/share/Steam/ubuntu12_64/gameoverlayrenderer.so' from LD_PRELOAD cannot be preloaded (wrong ELF class: ELFCLASS64): ignored.
Installing breakpad exception handler for appid(gameoverlayui)/version(20140715181500_client)
Installing breakpad exception handler for appid(gameoverlayui)/version(1.0_client)
Installing breakpad exception handler for appid(gameoverlayui)/version(1.0_client)
Fontconfig error: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 70: non-double matrix element
Fontconfig error: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 70: non-double matrix element
Fontconfig warning: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 78: saw unknown, expected number
[0725/222647:ERROR:object_proxy.cc(239)] Failed to call method: org.freedesktop.DBus.Error.ServiceUnknown: The name org.freedesktop.NetworkManager was not provided by any .service files
[0725/222647:WARNING:proxy_service.cc(958)] PAC support disabled because there is no system implementation
Installing breakpad exception handler for appid(gameoverlayui)/version(1.0_client)
Using breakpad crash handler
Setting breakpad minidump AppID = 570
Forcing breakpad minidump interfaces to load
Looking up breakpad interfaces from steamclient
Calling BreakpadMiniDumpSystemInit
Looking up breakpad interfaces from steamclient
Calling BreakpadMiniDumpSystemInit
Steam_SetMinidumpSteamID: Caching Steam ID: 76561198074650116 [API loaded yes]
Steam_SetMinidumpSteamID: Setting Steam ID: 76561198074650116
SDL video target is 'x11'
SDL failed to create GL compatibility profile (whichProfile=0!
This system supports the OpenGL extension GL_EXT_framebuffer_object.
This system supports the OpenGL extension GL_EXT_framebuffer_blit.
This system supports the OpenGL extension GL_EXT_framebuffer_multisample.
This system DOES NOT support the OpenGL extension GL_APPLE_fence.
This system supports the OpenGL extension GL_NV_fence.
This system supports the OpenGL extension GL_ARB_sync.
This system supports the OpenGL extension GL_EXT_draw_buffers2.
This system supports the OpenGL extension GL_EXT_bindable_uniform.
This system DOES NOT support the OpenGL extension GL_APPLE_flush_buffer_range.
This system supports the OpenGL extension GL_ARB_map_buffer_range.
This system supports the OpenGL extension GL_ARB_vertex_buffer_object.
This system supports the OpenGL extension GL_ARB_occlusion_query.
This system DOES NOT support the OpenGL extension GL_APPLE_texture_range.
This system DOES NOT support the OpenGL extension GL_APPLE_client_storage.
This system DOES NOT support the OpenGL extension GL_ARB_uniform_buffer.
This system supports the OpenGL extension GL_ARB_vertex_array_bgra.
This system supports the OpenGL extension GL_EXT_vertex_array_bgra.
This system supports the OpenGL extension GL_ARB_framebuffer_object.
This system DOES NOT support the OpenGL extension GL_GREMEDY_string_marker.
This system supports the OpenGL extension GL_ARB_debug_output.
This system supports the OpenGL extension GL_EXT_direct_state_access.
This system supports the OpenGL extension GL_NV_bindless_texture.
This system DOES NOT support the OpenGL extension GL_AMD_pinned_memory.
This system supports the OpenGL extension GL_EXT_framebuffer_multisample_blit_scaled.
This system supports the OpenGL extension GL_EXT_texture_sRGB_decode.
This system supports the OpenGL extension GL_NVX_gpu_memory_info.
This system DOES NOT support the OpenGL extension GL_ATI_meminfo.
This system supports the OpenGL extension GL_EXT_texture_compression_s3tc.
This system supports the OpenGL extension GL_EXT_texture_compression_dxt1.
This system DOES NOT support the OpenGL extension GL_ANGLE_texture_compression_dxt3.
This system DOES NOT support the OpenGL extension GL_ANGLE_texture_compression_dxt5.
This system DOES NOT support the OpenGL extension GLX_EXT_swap_control_tear.
GL_NV_bindless_texture: DISABLED
GL_AMD_pinned_memory: DISABLED
GL_EXT_texture_sRGB_decode: AVAILABLE
GL_NVX_gpu_memory_info: AVAILABLE
GL_ATI_meminfo: UNAVAILABLE
GL_NVX_gpu_memory_info: Total Dedicated: 2097152, Total Avail: 2097152, Current Avail: 2076116
GL_MAX_SAMPLES_EXT: 32
Adding VPK file: /home/akikyo/.local/share/Steam/SteamApps/common/dota 2 beta/dota/sound_vo_english
Adding VPK file: /home/akikyo/.local/share/Steam/SteamApps/common/dota 2 beta/dota/pak01
Adding VPK file: /home/akikyo/.local/share/Steam/SteamApps/common/dota 2 beta/platform/pak01
Did not detect any valid joysticks.
WARNING: unable to link Test_StartScript and Test_StartScript because one or more is a ConCommand.
WARNING: unable to link Test_RandomChance and Test_RandomChance because one or more is a ConCommand.
WARNING: unable to link Test_LoopForNumSeconds and Test_LoopForNumSeconds because one or more is a ConCommand.
WARNING: unable to link Test_Loop and Test_Loop because one or more is a ConCommand.
WARNING: unable to link Test_LoopCount and Test_LoopCount because one or more is a ConCommand.
WARNING: unable to link Test_StartLoop and Test_StartLoop because one or more is a ConCommand.
WARNING: unable to link log_flags and log_flags because one or more is a ConCommand.
WARNING: unable to link log_color and log_color because one or more is a ConCommand.
WARNING: unable to link log_verbosity and log_verbosity because one or more is a ConCommand.
WARNING: unable to link log_level and log_level because one or more is a ConCommand.
WARNING: unable to link log_dumpchannels and log_dumpchannels because one or more is a ConCommand.
Load a scaleform font provider?
Creating D3D9 device with D3DCREATE_MULTITHREADED
IDirect3DDevice9::Create: BackBufWidth: 1366, BackBufHeight: 768, D3DFMT: 3, BackBufCount: 1, MultisampleType: 0, MultisampleQuality: 0
GL sampler object usage: DISABLED
##### swap interval = 0 swap limit = 1 #####
Fontconfig error: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 70: non-double matrix element
Fontconfig error: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 70: non-double matrix element
Fontconfig warning: "/etc/fonts/conf.d/10-scale-bitmap-fonts.conf", line 78: saw unknown, expected number
!! Controller config file passed by steamworks game 570 did not exist at /home/akikyo/.local/share/Steam/SteamApps/common/dota 2 beta/dota/cfg/controller.vdf
Installing breakpad exception handler for appid(steam)/version(1405474565_client)
[0725/222707:ERROR:object_proxy.cc(239)] Failed to call method: org.freedesktop.DBus.Error.ServiceUnknown: The name org.freedesktop.NetworkManager was not provided by any .service files
[0725/222707:WARNING:proxy_service.cc(958)] PAC support disabled because there is no system implementation
Im not able to run ETS 2 it's going to change resolution to 1024x768 in whole desktop and then crash. (Launch option: optirun -b primus %command%) output:
Game update: AppID 227300 "Euro Truck Simulator 2", ProcID 1554, IP 0.0.0.0:0
ERROR: ld.so: object '/home/akikyo/.local/share/Steam/ubuntu12_32/gameoverlayrenderer.so' from LD_PRELOAD cannot be preloaded (wrong ELF class: ELFCLASS32): ignored.
ERROR: ld.so: object '/home/akikyo/.local/share/Steam/ubuntu12_32/gameoverlayrenderer.so' from LD_PRELOAD cannot be preloaded (wrong ELF class: ELFCLASS32): ignored.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
(steam:1358): LIBDBUSMENU-GLIB-WARNING **: Trying to remove a child that doesn't believe we're it's parent.
ERROR: ld.so: object '/home/akikyo/.local/share/Steam/ubuntu12_32/gameoverlayrenderer.so' from LD_PRELOAD cannot be preloaded (wrong ELF class: ELFCLASS32): ignored.
Setting breakpad minidump AppID = 227300
Steam_SetMinidumpSteamID: Caching Steam ID: 76561198074650116 [API loaded no]
Registered appid 227300 to use native controller config at /home/akikyo/.local/share/Steam/SteamApps/common/Euro Truck Simulator 2/controller.vdf
X Error of failed request: GLXUnsupportedPrivateRequest
Major opcode of failed request: 155 (GLX)
Minor opcode of failed request: 16 (X_GLXVendorPrivate)
Serial number of failed request: 80
Current serial number in output stream: 82
Game removed: AppID 227300 "Euro Truck Simulator 2", ProcID 1567
sudo journalctl
Jul 25 22:35:15 lenovo bumblebeed[396]: [ 891.508930] [WARN][XORG] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
Jul 25 22:35:15 lenovo bumblebeed[396]: [ 891.508943] [WARN][XORG] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
Jul 25 22:35:15 lenovo bumblebeed[396]: [ 891.508969] [WARN][XORG] (WW) Unresolved symbol: fbGetGCPrivateKey
Jul 25 22:35:15 lenovo bumblebeed[396]: [ 891.508984] [WARN][XORG] (WW) NVIDIA(0): Unable to get display device for DPI computation.
Jul 25 22:35:16 lenovo kernel: eurotrucks2[1567]: segfault at 17 ip 00007f40f1e30433 sp 00007fff05479db0 error 6 in steamclient.so[7f40f1b66000+f7b000]
Jul 25 22:35:16 lenovo kernel: [drm] Module unloaded
Jul 25 22:35:16 lenovo kernel: bbswitch: disabling discrete graphics
Jul 25 22:35:16 lenovo kernel: ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140214/nsarguments-95)
Jul 25 22:35:16 lenovo kernel: pci 0000:01:00.0: Refused to change power state, currently in D0
Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838215] [ERROR][XORG] (EE) Server terminated successfully (0). Closing log file.
Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838233] [ERROR][XORG] (EE)
Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838238] [ERROR][XORG] (EE) Backtrace:
Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838242] [ERROR][XORG] (EE) 0: Xorg (xorg_backtrace+0x56) [0x58f186]
Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838245] [ERROR][XORG] (EE) 1: Xorg (0x400000+0x192fc9) [0x592fc9]
Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838249] [ERROR][XORG] (EE) 2: /usr/lib/libpthread.so.0 (0x7fd21c5c8000+0xf4b0) [0x7fd21c5d74b0]
Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838256] [ERROR][XORG] (EE) 3: /usr/lib/libc.so.6 (malloc_usable_size+0x25) [0x7fd21b290d25]
Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838272] [ERROR][XORG] (EE) 4: /usr/lib/nvidia/libGL.so.1 (0x7fd21818b000+0xb61d9) [0x7fd2182411d9]
Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838286] [ERROR][XORG] (EE)
Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838298] [ERROR][XORG] (EE) Segmentation fault at address 0x0
Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838306] [ERROR][XORG] (EE)
Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838317] [ERROR][XORG] (EE) Caught signal 11 (Segmentation fault). Server aborting
Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838320] [ERROR][XORG] (EE)
Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838323] [ERROR][XORG] (EE)
Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838329] [ERROR][XORG] (EE) Please also check the log file at "/var/log/Xorg.8.log" for additional information.
Jul 25 22:35:17 lenovo bumblebeed[396]: [ 892.838334] [ERROR][XORG] (EE)
sudo nano /var/log/Xorg.8.log
X.Org X Server 1.15.2
Release Date: 2014-06-27
[ 887.399] X Protocol Version 11, Revision 0
[ 887.399] Build Operating System: Linux 3.15.1-1-ARCH x86_64
[ 887.399] Current Operating System: Linux lenovo 3.15.5-2-ARCH #1 SMP PREEMPT Fri Jul 11 07:56:02 CEST 2014 x86_64
[ 887.399] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=a89135f9-ef1e-4b90-a073-ee78d492b58a rw rcutree.rcu_idle_gp_delay=1 quiet
[ 887.399] Build Date: 27 June 2014 07:32:26PM
[ 887.399]
[ 887.399] Current version of pixman: 0.32.6
[ 887.399] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 887.399] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 887.399] (==) Log file: "/var/log/Xorg.8.log", Time: Fri Jul 25 22:35:11 2014
[ 887.400] (++) Using config file: "/etc/bumblebee/xorg.conf.nvidia"
[ 887.400] (++) Using config directory: "/etc/bumblebee/xorg.conf.d"
[ 887.400] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 887.400] (==) ServerLayout "Layout0"
[ 887.400] (==) No screen section available. Using defaults.
[ 887.400] (**) |-->Screen "Default Screen Section" (0)
[ 887.400] (**) | |-->Monitor "<default monitor>"
[ 887.400] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 887.400] (**) | |-->Device "DiscreteNvidia"
[ 887.400] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 887.400] (**) Option "AutoAddDevices" "false"
[ 887.400] (**) Option "AutoAddGPU" "false"
[ 887.400] (**) Not automatically adding devices
[ 887.400] (==) Automatically enabling devices
[ 887.400] (**) Not automatically adding GPU devices
[ 887.401] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 887.401] Entry deleted from font path.
[ 887.401] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 887.401] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 887.401] Entry deleted from font path.
[ 887.401] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 887.401] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/
[ 887.401] (++) ModulePath set to "/usr/lib/nvidia/xorg/,/usr/lib/xorg/modules"
[ 887.401] (==) |-->Input Device "<default pointer>"
[ 887.401] (==) |-->Input Device "<default keyboard>"
[ 887.401] (==) The core pointer device wasn't specified explicitly in the layout.
Using the default mouse configuration.
[ 887.401] (==) The core keyboard device wasn't specified explicitly in the layout.
Using the default keyboard configuration.
[ 887.401] (II) Loader magic: 0x811cc0
[ 887.401] (II) Module ABI versions:
[ 887.401] X.Org ANSI C Emulation: 0.4
[ 887.401] X.Org Video Driver: 15.0
[ 887.401] X.Org XInput driver : 20.0
[ 887.401] X.Org Server Extension : 8.0
[ 887.401] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 887.401] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 887.401] setversion 1.4 failed: Permission denied
[ 887.403] (--) PCI:*(0:1:0:0) 10de:0fd4:17aa:3977 rev 161, Mem @ 0xd2000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00003000/128
[ 887.403] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 887.403] Initializing built-in extension Generic Event Extension
[ 887.404] Initializing built-in extension SHAPE
[ 887.404] Initializing built-in extension MIT-SHM
[ 887.404] Initializing built-in extension XInputExtension
[ 887.404] Initializing built-in extension XTEST
[ 887.404] Initializing built-in extension BIG-REQUESTS
[ 887.404] Initializing built-in extension SYNC
[ 887.404] Initializing built-in extension XKEYBOARD
[ 887.404] Initializing built-in extension XC-MISC
[ 887.404] Initializing built-in extension SECURITY
[ 887.404] Initializing built-in extension XINERAMA
[ 887.404] Initializing built-in extension XFIXES
[ 887.404] Initializing built-in extension RENDER
[ 887.404] Initializing built-in extension RANDR
[ 887.404] Initializing built-in extension COMPOSITE
[ 887.404] Initializing built-in extension DAMAGE
[ 887.404] Initializing built-in extension MIT-SCREEN-SAVER
[ 887.404] Initializing built-in extension DOUBLE-BUFFER
[ 887.404] Initializing built-in extension RECORD
[ 887.404] Initializing built-in extension DPMS
[ 887.404] Initializing built-in extension Present
[ 887.404] Initializing built-in extension DRI3
[ 887.404] Initializing built-in extension X-Resource
[ 887.404] Initializing built-in extension XVideo
[ 887.404] Initializing built-in extension XVideo-MotionCompensation
[ 887.404] Initializing built-in extension XFree86-VidModeExtension
[ 887.404] Initializing built-in extension XFree86-DGA
[ 887.404] Initializing built-in extension XFree86-DRI
[ 887.404] Initializing built-in extension DRI2
[ 887.404] (II) "glx" will be loaded by default.
[ 887.404] (II) LoadModule: "dri2"
[ 887.404] (II) Module "dri2" already built-in
[ 887.404] (II) LoadModule: "glamoregl"
[ 887.404] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 887.454] (II) Module glamoregl: vendor="X.Org Foundation"
[ 887.454] compiled for 1.15.0, module version = 0.6.0
[ 887.454] ABI class: X.Org ANSI C Emulation, version 0.4
[ 887.454] (II) LoadModule: "glx"
[ 887.454] (II) Loading /usr/lib/nvidia/xorg/modules/extensions/libglx.so
[ 887.495] (II) Module glx: vendor="NVIDIA Corporation"
[ 887.495] compiled for 4.0.2, module version = 1.0.0
[ 887.495] Module class: X.Org Server Extension
[ 887.495] (II) NVIDIA GLX Module 340.24 Wed Jul 2 15:04:31 PDT 2014
[ 887.495] Loading extension GLX
[ 887.495] (II) LoadModule: "nvidia"
[ 887.495] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 887.500] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 887.500] compiled for 4.0.2, module version = 1.0.0
[ 887.500] Module class: X.Org Video Driver
[ 887.500] (II) LoadModule: "mouse"
[ 887.500] (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
[ 887.502] (II) Module mouse: vendor="X.Org Foundation"
[ 887.502] compiled for 1.15.0, module version = 1.9.0
[ 887.502] Module class: X.Org XInput Driver
[ 887.502] ABI class: X.Org XInput driver, version 20.0
[ 887.502] (II) LoadModule: "kbd"
[ 887.502] (WW) Warning, couldn't open module kbd
[ 887.502] (II) UnloadModule: "kbd"
[ 887.502] (II) Unloading kbd
[ 887.502] (EE) Failed to load module "kbd" (module does not exist, 0)
[ 887.502] (II) NVIDIA dlloader X Driver 340.24 Wed Jul 2 14:42:23 PDT 2014
[ 887.502] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 887.502] (--) using VT number 1
[ 887.502] (II) Loading sub module "fb"
[ 887.502] (II) LoadModule: "fb"
[ 887.502] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 887.504] (II) Module fb: vendor="X.Org Foundation"
[ 887.504] compiled for 1.15.2, module version = 1.0.0
[ 887.504] ABI class: X.Org ANSI C Emulation, version 0.4
[ 887.504] (WW) Unresolved symbol: fbGetGCPrivateKey
[ 887.504] (II) Loading sub module "wfb"
[ 887.504] (II) LoadModule: "wfb"
[ 887.504] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 887.506] (II) Module wfb: vendor="X.Org Foundation"
[ 887.506] compiled for 1.15.2, module version = 1.0.0
[ 887.506] ABI class: X.Org ANSI C Emulation, version 0.4
[ 887.506] (II) Loading sub module "ramdac"
[ 887.506] (II) LoadModule: "ramdac"
[ 887.506] (II) Module "ramdac" already built-in
[ 887.506] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 887.506] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 887.506] (==) NVIDIA(0): RGB weight 888
[ 887.506] (==) NVIDIA(0): Default visual is TrueColor
[ 887.506] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 887.506] (**) NVIDIA(0): Option "NoLogo" "true"
[ 887.506] (**) NVIDIA(0): Option "ProbeAllGpus" "false"
[ 887.507] (**) NVIDIA(0): Option "UseEDID" "false"
[ 887.507] (**) NVIDIA(0): Option "UseDisplayDevice" "none"
[ 887.507] (**) NVIDIA(0): Enabling 2D acceleration
[ 887.507] (**) NVIDIA(0): Ignoring EDIDs
[ 887.507] (**) NVIDIA(0): Option "UseDisplayDevice" set to "none"; enabling NoScanout
[ 887.507] (**) NVIDIA(0): mode
[ 891.006] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20130102)
[ 891.008] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 660M (GK107) at PCI:1:0:0 (GPU-0)
[ 891.008] (--) NVIDIA(0): Memory: 2097152 kBytes
[ 891.008] (--) NVIDIA(0): VideoBIOS: 80.07.3c.00.16
[ 891.008] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 891.008] (--) NVIDIA(0): Valid display device(s) on GeForce GTX 660M at PCI:1:0:0
[ 891.008] (--) NVIDIA(0): none
[ 891.008] (II) NVIDIA(0): Validated MetaModes:
[ 891.008] (II) NVIDIA(0): "NULL"
[ 891.008] (II) NVIDIA(0): Virtual screen size determined to be 640 x 480
[ 891.008] (WW) NVIDIA(0): Unable to get display device for DPI computation.
[ 891.008] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[ 891.008] (--) Depth 24 pixmap format is 32 bpp
[ 891.008] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[ 891.008] (II) NVIDIA: access.
[ 891.013] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 891.013] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 891.013] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 891.013] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 891.013] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 891.013] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 891.013] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 891.013] (II) NVIDIA(0): Config Options in the README.
[ 891.013] (II) NVIDIA(0): Setting mode "NULL"
[ 891.028] Loading extension NV-GLX
[ 891.035] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 891.035] (==) NVIDIA(0): Backing store enabled
[ 891.035] (==) NVIDIA(0): Silken mouse enabled
[ 891.035] (==) NVIDIA(0): DPMS enabled
[ 891.035] Loading extension NV-CONTROL
[ 891.036] (II) Loading sub module "dri2"
[ 891.036] (II) LoadModule: "dri2"
[ 891.036] (II) Module "dri2" already built-in
[ 891.036] (II) NVIDIA(0): [DRI2] Setup complete
[ 891.036] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 891.036] (--) RandR disabled
[ 891.044] (II) Initializing extension GLX
[ 891.100] (II) Using input driver 'mouse' for '<default pointer>'
[ 891.100] (**) Option "CorePointer" "on"
[ 891.100] (**) <default pointer>: always reports core events
[ 891.100] (WW) <default pointer>: No Device specified, looking for one...
[ 891.146] (II) <default pointer>: Setting Device option to "/dev/input/mice"
[ 891.146] (--) <default pointer>: Device: "/dev/input/mice"
[ 891.146] (==) <default pointer>: Protocol: "Auto"
[ 891.146] (**) <default pointer>: always reports core events
[ 891.146] (**) Option "Device" "/dev/input/mice"
[ 891.200] (==) <default pointer>: Emulate3Buttons, Emulate3Timeout: 50
[ 891.200] (**) <default pointer>: ZAxisMapping: buttons 4 and 5
[ 891.200] (**) <default pointer>: Buttons: 9
[ 891.200] (II) XINPUT: Adding extended input device "<default pointer>" (type: MOUSE, id 6)
[ 891.200] (**) <default pointer>: (accel) keeping acceleration scheme 1
[ 891.200] (**) <default pointer>: (accel) acceleration profile 0
[ 891.200] (**) <default pointer>: (accel) acceleration factor: 2.000
[ 891.200] (**) <default pointer>: (accel) acceleration threshold: 4
[ 891.200] (II) <default pointer>: Setting mouse protocol to "ExplorerPS/2"
[ 891.493] (II) <default pointer>: ps2EnableDataReporting: succeeded
[ 891.493] (II) LoadModule: "kbd"
[ 891.494] (WW) Warning, couldn't open module kbd
[ 891.494] (II) UnloadModule: "kbd"
[ 891.494] (II) Unloading kbd
[ 891.494] (EE) Failed to load module "kbd" (module does not exist, 0)
[ 891.494] (EE) No input driver matching `kbd'
[ 891.497] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 891.497] (II) AutoAddDevices is off - not adding device.
[ 891.497] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[ 891.497] (II) AutoAddDevices is off - not adding device.
[ 891.497] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 891.497] (II) AutoAddDevices is off - not adding device.
[ 891.498] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[ 891.498] (II) AutoAddDevices is off - not adding device.
[ 891.498] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 891.498] (II) AutoAddDevices is off - not adding device.
[ 891.498] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 891.498] (II) AutoAddDevices is off - not adding device.
[ 891.499] (II) config/udev: Adding drm device (/dev/dri/card1)
[ 891.499] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 891.499] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 891.499] setversion 1.4 failed: Permission denied
[ 891.499] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event7)
[ 891.499] (II) AutoAddDevices is off - not adding device.
[ 891.500] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0)
[ 891.500] (II) AutoAddDevices is off - not adding device.
[ 891.500] (II) config/udev: Adding input device CHESEN USB Keyboard (/dev/input/event8)
[ 891.500] (II) AutoAddDevices is off - not adding device.
[ 891.501] (II) config/udev: Adding input device CHESEN USB Keyboard (/dev/input/event9)
[ 891.501] (II) AutoAddDevices is off - not adding device.
[ 891.501] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event12)
[ 891.501] (II) AutoAddDevices is off - not adding device.
[ 891.501] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event13)
[ 891.501] (II) AutoAddDevices is off - not adding device.
[ 891.502] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event14)
[ 891.502] (II) AutoAddDevices is off - not adding device.
[ 891.502] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event15)
[ 891.502] (II) AutoAddDevices is off - not adding device.
[ 891.502] (II) config/udev: Adding input device Lenovo EasyCamera (/dev/input/event16)
[ 891.502] (II) AutoAddDevices is off - not adding device.
[ 891.503] (II) config/udev: Adding input device Ideapad extra buttons (/dev/input/event10)
[ 891.503] (II) AutoAddDevices is off - not adding device.
[ 891.503] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event6)
[ 891.503] (II) AutoAddDevices is off - not adding device.
[ 891.503] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event17)
[ 891.504] (II) AutoAddDevices is off - not adding device.
[ 891.504] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[ 891.504] (II) AutoAddDevices is off - not adding device.
[ 891.504] (II) config/udev: Adding input device PC Speaker (/dev/input/event11)
[ 891.504] (II) AutoAddDevices is off - not adding device.
[ 892.695] (II) UnloadModule: "mouse"
[ 892.720] (II) NVIDIA(GPU-0): Deleting GPU-0
[ 892.723] (EE) Server terminated successfully (0). Closing log file.
Last edited by Akikyo (2014-07-24 21:04:45)

I can't be sure but most of the dota2 output looks "normal" to me (I get the same yet it works fine).
eurotrucks is clearly crashing. You could try to force the resolution it uses in its config files?
Or maybe it's missing a lib (you may need to install 32bit versions):
ldd /path/to/eurotrucks
to see if that's the case. If not, you might have to take it up with the eurotrucks developers.
And you could try using fluxbox/openbox just to see what happens. A lot lighter than KDE.
Have a good look though: https://wiki.archlinux.org/index.php/Steam
and remember to check for missing 32bit libs.

No TV sound - Problem with Pulseaudio and Gnome

Hi Community!
Since January 2013 I got big problems with the sound of my tvcard. The card is a Sundtek Media TV Pro. But after all the problems have nothing to to with the card itself!
So far I found out, that the problem is with Pulseaudio.
- Sound works under Windows on same PC.
- Sound don't work under Arch - not with tvtime, not with vlc, etc.
- Problem occurs even on a new installed system with the Arch-2013-02-01 install medium.
cat /etc/mediasrv.log
[1033] Pulseaudio connect reported an error (6 - Connection refused)
[1033] select error() in audio processor (can be caused because of pulseaudio) (Interrupted system call)
After setting up a new Arch installation with just xorg-server, gnome, tvtime and the sundtek driver from AUR I run journalctl -b:
Feb 10 16:25:15 hightower pulseaudio[636]: [pulseaudio] pid.c:
Daemon already running.
With sudo journalctl | grep 'Feb 10 16:2' I get the following output:
Feb 10 16:25:01 hightower rtkit-daemon[489]: Successfully made thread 488 of process 488 (/usr/bin/pulseaudio) owned by '120' high priority at nice level -11.
Feb 10 16:25:14 hightower rtkit-daemon[489]: Successfully made thread 606 of process 606 (/usr/bin/pulseaudio) owned by '1000' high priority at nice level -11.
Feb 10 16:25:15 hightower rtkit-daemon[489]: Successfully made thread 636 of process 636 (/usr/bin/pulseaudio) owned by '1000' high priority at nice level -11.
Feb 10 16:25:15 hightower pulseaudio[636]: [pulseaudio] pid.c: Daemon already running.
Feb 10 16:28:55 hightower pulseaudio[1000]: [pulseaudio] module-jackdbus-detect.c: Unable to contact D-Bus session bus: org.freedesktop.DBus.Error.NotSupported: Unable to autolaunch a dbus-daemon without a $DISPLAY for X11
Feb 10 16:28:55 hightower pulseaudio[1000]: [pulseaudio] module.c: Failed to load module "module-jackdbus-detect" (argument:""): initialization failed.
Feb 10 16:28:55 hightower pulseaudio[1000]: [pulseaudio] socket-server.c: bind(): Die Adresse wird bereits verwendet
Feb 10 16:28:55 hightower pulseaudio[1000]: [pulseaudio] module.c: Failed to load module "module-esound-protocol-unix" (argument: ""): initialization failed.
Feb 10 16:28:55 hightower pulseaudio[1000]: [pulseaudio] main.c: Module load failed.
Feb 10 16:28:55 hightower pulseaudio[1000]: [pulseaudio] main.c: Module load failed.
Feb 10 16:28:55 hightower pulseaudio[1000]: [pulseaudio] main.c: Konnte Daemon nicht initialisieren.
Feb 10 16:28:55 hightower pulseaudio[997]: [pulseaudio] main.c: Start des Daemons fehlgeschlagen.
So, if I understand right, pulseaudio is alreade started by the rtkit-daemon and gnome couldn't start it again.
At https://bugs.archlinux.org/task/30926 I found a hint concerning /etc/xdg/autostart/pulseaudio.desktop and /etc/xdg/autostart/pulseaudio-kde.desktop.
After removing them from /etc/xdg/autostart and running journalctl -b there are no more errors.
With sudo journalctl | grep 'pulseaudio' I get:
sudo journalctl | grep 'Feb 10 17:4' | grep 'pulse*'
Feb 10 17:41:42 hightower rtkit-daemon[485]: Successfully made thread 484 of process 484 (/usr/bin/pulseaudio) owned by '120' high priority at nice level -11.
Feb 10 17:41:55 hightower rtkit-daemon[485]: Successfully made thread 625 of process 625 (/usr/bin/pulseaudio) owned by '1000' high priority at nice level -11.
In my opinion all looks ok! I also checked the channels with the alsamixer and it looks good, too.
So I ran vlc v4l2://:dev=/dev/video0:width=720:height=576:tuner-frequency=510750:adev=/dev/null:standard=255 - but still no sound.
With cat /var/log/mediasrv.log I checked the drivers logfile:
2013-02-10 17:48:55 [343] SETTING DVB-C
2013-02-10 17:48:55 [343] switching to analog TV
2013-02-10 17:48:56 [343] SETTING PAL/SECAM
2013-02-10 17:48:58 [343] invalid audio input selected: 2
2013-02-10 17:48:58 [343] Setting frequency: 510750000
2013-02-10 17:48:58 [343] Using settings for Europe
2013-02-10 17:48:58 [343] Set Pixelformat: 0 YUV 4:2:2 (YUYV)
2013-02-10 17:48:58 [1033] Starting audio processor (PID 1033)
2013-02-10 17:48:58 [1033] initializing audio in audio processor
2013-02-10 17:48:58 [1033] loaded local pulseaudio driver
2013-02-10 17:48:58 [1033] select error() in audio processor (can be caused because of pulseaudio) (Interrupted system call)
2013-02-10 17:48:59 [1033] Pulseaudio connect reported an error (6 - Connection refused)
2013-02-10 17:48:59 [1033] select error() in audio processor (can be caused because of pulseaudio) (Interrupted system call)
2013-02-10 17:48:59 [1033] Pulseaudio connect reported an error (6 - Connection refused)
I started tvtime again. This time I ran rm -rf ~/.config/pulse/ and killall pulseaudio to kill the Pulseaudio server. I instantly got a loud noise out of my speakers.
I closed tvtime and re-opened it. And there it was: TV SOUND OUT OF MY SPEAKERS!
But now, when I run pavucontrol I get:
Connection to PulseAudio failed. Automatic retry in 5s.
In this cas this is likely because PULSE_SERVER in the Environment/X11 root Windows Properties or default-server in client.conf is misconfigured.
This situation can also arrise when PulseAudio crashed and left stale details in the X11 Root Windows.
If this is the case, then PuseAudio should autospawn again, or if this is not configured you sould run start-pulseaudio-x11 manually.
I got the information from Sundtek, that Pulseaudio should not be started as system service. Instead, every user should have an own Pulseaudio daemon and that PA was concepted this way. But they don't know how it is implemented in ArchLinux.
I also don't know it exactly. So the question to all you ArchLinu pro's:
How is PA implemented in Arch? And how can I sustainable solve my problem?
Thank you for your time and help!
Durag

There is just one more thing I found out.
After logging into Gnome and running ps aux | grep pulse I get:
rebel 727 0.7 0.2 444316 10288 ? S<l 03:02 0:00 /usr/bin/pulseaudio --start --log-target=syslog
rebel 731 0.0 0.0 71236 2652 ? S 03:02 0:00 /usr/lib/pulse/gconf-helper
rebel 843 0.0 0.0 17396 1184 pts/0 D+ 03:03 0:00 grep pulse
To get the sound to work I run:
rm -rf .config/pulse/
killall pulseaudio
killall -9 pulseaudio
I again run ps aux | grep pulse
rebel 4016 4.2 0.2 510124 11528 ? Sl 03:06 0:02 /usr/bin/pulseaudio --start --log-target=syslog
rebel 4020 0.0 0.0 71368 2700 ? S 03:06 0:00 /usr/lib/pulse/gconf-helper
rebel 4046 0.0 0.0 19456 1216 pts/0 R+ 03:07 0:00 grep pulse
I can recognize that the STATs have changed. Maybe this can help to solve the problem?

[SOLVED]Problem with packettracer and firefox

Hi
I've got a problem with firefox and packettracer.
When i click on pka file in firefox, it don't open this file in packettracer but wants to save on disk. I've got a version 5.3.1-1 packettracer and latest version firefox.
I don't know when problem was occured but last week everything was ok. I think that's either update. Meyby it's important that when i type in console:
update-desktop-database /usr/share/mime
i've got such errors:
Unknown media type in type 'all/all'
Unknown media type in type 'all/allfiles'
Unknown media type in type 'uri/mms'
Unknown media type in type 'uri/mmst'
Unknown media type in type 'uri/mmsu'
Unknown media type in type 'uri/pnm'
Unknown media type in type 'uri/rtspt'
Unknown media type in type 'uri/rtspu'
Unknown media type in type 'fonts/package'
Unknown media type in type 'interface/x-winamp-skin'
i have installed kde 4.5.5-1
Do you know some solution for my problem?
edit: update firefox solve my problem
Last edited by ElNinijo (2013-06-08 08:35:12)

I've had this happen now and again. You can rebind the lease yourself with:
$ dhcpcd --rebind
You could also try increasing the timeout by adding
TimeoutDHCP=
to your netctl profile/s - see netctl.profile(5) as WonderWoofy suggests. Although I haven't tried the latter.
Last edited by youngdm (2013-09-01 22:01:05)

Problem with sessions in Kate Editor

Hey guys!
I'm using Kate Editor to code and i'm having problems with sessions. If kate is open and I logout KDE, when I come back to KDE all my customizations in Kate's session (activated plugins, font size, etc) are lost.
If I manually close Kate before logout from KDE, all the customizations are kept when a manually start Kate. I tried a lot of workarounds, but none worked.
Is this a bug? Someone else with this issue?
Thanks in advance!

The Warning errors are simply because you don't have the tablespaces, users, and roles defined in your application system under the DB Admin tab. Unless it is important to you to capture the physical implementation of your tables exactly as well as the table definitions, you can safely ignore these. If the physical implementation IS important to you, then you need to create these tablespaces, roles and users under the database that you created under the DB Admin tab before you start the capture.
The Error is because in the set of objects you are capturing there is a foreign key that references the table named "PLEASANT". This table must be among the objects that you are capturing, or must already be in a Table Definition in your application system in the repository.

Problems with ibus in KDE

Similar Messages

Maybe you are looking for