Problems with Image Matte not staying connected to project.

System: Dell
Model: XPS 8300
Processor: Intel Core i7-2600 CPU @ 3.40 GHz
RAM: 16 GB
System Type: Windows 7 Home Premium; Service Pack 1; 64 Bit Operating System
I've been having problems with my image matte(s) staying connected in my projects. It happens when I reload any project that has it. It's a real simple vignette used on black video. The image file is on the root of the project folder, so I don't see why it won't stay connected. Scratching my head on this one. Let me know if you need any more information.
- NHerman

It's going offline and wants me to relink it again.
Hard drive is a standard drive. It hold 2 TBs of storage.
If it helps, I am also using a templated folder system that I copy for each project I do. This folder has this same file in it.

Similar Messages

Has anyone had a problem with fcp x not playing back a project since installing 10.0.9 update?

Has anyone had a problem with fcp x not playing back a project since installing 10.0.9 update?

Not here; updated three systems without issues.
Can you provide more details on your system specs, the projects you're referring to, and what kind of behavior you're encountering?
Russ

Disk Copy 6.3.3 reports problem with image - but not always

I have run across a problem with Disk Copy 6.3.3 that looks to me like a bug of some sort, but I can't be sure and want to see if anyone has any additional information. I am running Mac OS 8.1 on a Quadra 950, just in case it is important.
I have saved almost all my old installation floppies as Disk Copy images and now use these images if I have to reinstall software due to failures of several original media. I recently had reason to reinstall software that was stored on multiple disk images and I could never mount them all without receiving the following error after some of the disks were mounted:
+There is a problem with the disk {whatever the disk name is}.+
+Some information may have been lost.+
+Check any recently-used files for data loss, and use a+
+disk-repair program on the disk.+
After further investigation, I found that this problem not only affected this set of installation disks, but others as well. To make a long story short, I have found that I have at least two Disk Copy images that are causing this behavior. I have dozens of other images and they all mount successfully UNTIL I mount one of these two image files (there may be others, but I know of at least two at this time). After I mount either of these two images, many (I estimate more than 50%) of the other images seem to mount, but the message above appears after the mount completes. Some of the images seem to mount without errors, even after one of the two problem images are mounted. Unmounting the problem image does remedy the problem. The only way to mount images without errors again is to reboot.
Has anyone seen this before and have any additional information? In particular I would like to know if I can trust the images that are giving me problems - in particular the two that are causing this situation, but also the ones that indicate data corruption? I'd also like to know if there is a real fix for this problem? If the data in these images is not corrupt, I could make floppies from them every time I want to reinstall software, but I'm not sure the data is good and I really don't want to have to try to find floppies just for an occasional reinstall. Thanks for any help!

Well, I've got some additional information. I have a Macintosh LC running 7.5.5 that also has Disk Copy 6.3.3. I didn't copy the image files to the LC, but instead mounted them over the network, in a half-hearted attempt to rule out issues with disk I/O errors causing this problem. All images mounted without any errors. This pretty much eliminates any problems with the disk image itself being corrupt or with it being a problem with the content of the disk image causing a problem with Disk Copy 6.3.3.
I had been having some signs that my current system disk on the Quadra may be ready to fail, so I added another disk, formatted it, and installed a fresh install of 8.1 on it. Before doing much of anything to customize the installation (no software other than on the 8.1 install disk, almost no settings other than the default, etc...), I tested the images again and they failed again. This eliminates any problems with third party software that I had installed previously. I even booted with extensions disabled and still got the error message.
When I look in the Disk Copy log file, there are NO signs that any errors have ever occurred. This leads me to beleive that the message I'm seeing is not the fault of Disk Copy, but either the System or the Finder. My best guess right now is that once the image file is mounted by Disk Copy, that it is asking the System/Finder to do something that is either failing and produces the error message, or is returning an unexpected return code and causing Disk Copy to produce this message (which for some reason isn't being logged). If nobody has any clues from the additional information, I'll try reinstalling again with only a minimal install and see if I can figure something out. Thanks for any help that anyone might have!

Does anyone have problems with the ipad 4 staying connected to century link Internet?

Does anyone have problems with the ipad 4's wi if Internet staying connected to century links Internet??? Please help!!

LOTS of people reporting a range of similar issues.
https://discussions.apple.com/thread/6648856
https://discussions.apple.com/thread/6574287

Hey guys out there i have a problem with "App Store" not verifying connection, and app flickering!!

Hey guys my app store wont verify connection and after i press verify the screen goes wild and flickers andnothing happens HELP!

Hmm, the wild flickering bothers me, but see if either of these help...
Anonymous
Post subject: NSURLErrorDomain error -1100 in OS X 10.8
If you check for software updates using the App Store in OS X 10.8 and get "NSURLErrorDomain error -1100" the problem may be with your Software Update preferences. This is particularly likely if you were using a custom Apple Software Update server. To solve the problem, quit the App Store, move the following two files (if present) to the trash, restart, and only then rerun App Store updates:
/Library/Preferences/com.apple.SoftwareUpdate.plist
/Library/Preferences/com.apple.SoftwareUpdate.plist.lockfile
http://x704.net/bbs/viewtopic.php?f=12&t=6130
I was recently trying to upgrade to mountain lion through the app store. I have unreliable Internet from a cable company whom I will not name, but we all know who they are. My Internet dropped while downloading the upgrade. Once I went through the notorious unplug the modem/router and plugged it back in to gain Internet connectivity again, I could not resume. No matter what I did, the app store kept displaying "an error occurred." I am hoping that those with the same issue read this first to save them hours of skimming through the Internet to find a solution. Here are the steps to take:
1. Make sure you have reestablished Internet connection
2. Chances are you got frustrated when you tried to resume/unpause the download and clicked the "X" to the left. If so, select the "Store" drop-down menu from the App Store and select "View My Account." There should be an option to unhide your purchase. You know what to do.
3. There is also an option to reset all warnings for buying and downloading under "View My Account." Do this, click "Done," sign out of the App Store and quit the App Store.
4. Open the Preferences in safari and select Privacy. Select "Remove All Website Data." Just do it.
5. Launch the app store and sign in.
6. Now, if you "Check for Unfinished Downloads" everything works peachy.
I hope this helps. Not much I can do for your Internet connection though.
JonEz15...
https://discussions.apple.com/thread/4697970?tstart=120

Is anyone having problems with the new ipad staying connected to wi fi

My new Ipad 4G + WI FI keeps losing the connection to the internet. I have to continuously type in the password to our WI FI. Is anyone else having this problem? I didn't have it with the Ipad 2.

Search before posting please:
https://discussions.apple.com/thread/3812929?tstart=0

Problem with image snapshot not matching with original video

I was filming a fairly long clip. There was a mistake in it where the door was closed somewhere in the middle of the clip when it's suppose to be open. So I took a snapshot of the door when it was open somewhere in the beginning of the clip and opened it in Paint. I cut out the closed door(with a bit of the wall around it and saved it as jpg image.
When I inserted the image onto the clip the wall colour doesn't match. The image is slightly darker.
How can this be when the snapshot is from the same clip? Shouldn't the colours be exactly the same? I've attached photos.
This is the original video where the door on the left is closed.
I inserted the opened door image but it doesnt match even though I took the image from the same clip.
Can someone help me here please?
THANK YOU!!!!!

Put your video on track 1, add the open door still on track2. Add the linear wipe effect found in Video Effects-Transitions to the still. While you at it add the luma corrector effect as well found in Video Effects- Colour Correction. Turn off the eyeball on your video track 1, this will let you see more clearly the adjustments you are about to make. On the still track open up effects control, you should see the linear wipe adjustments. Move the transition complete to about 50% You should now see just half of your still. Play around with the wipe angle and feather, you should now see what this effect does. Turn on the eyeball on the video track and adjust the linear wipe on the still until you get the picture want. As Ann says you might need to adjust the gamma (or other brightness controls) of the still to get it to match, use the added luma corrector effect for this.
PS why does the spell checker for the forum insist on spelling' Colour' wrong

Is anyone having a problem with the new iPad (Gen. 3) not staying connected to the charger? It seems to ALWAYS get jiggled loose and no longer be charging. My iPad 1 has no issue but I can't browse Internet w/o new iPad unplugging. Horrible!

I notice that my new IPad (3rd generation) will not stay connected to the power cord at all, I'm not exagerating, if I plug it in and browse the Internet without fail it will become unplugged and I will have to push the plug back in (Ba-beep). Ive actually grown to despise that sound when you plug your iPhone or iPad in because it reminds me of how much money I spent on something that PHYSICALLY will not charge while I'm using it.
I know the problem with it holding a charge while in use, I get it, the screen is amazing and it takes a lot to run the display, however, it is unacceptable to me that I can't even keep the thing plugged in while I'm using it. I can not even leave it on my Cal King bed overnight because I will wake up in the morning to find that the plug has been jiggled loose in a corner, so it's still attached but not making a connection thus not being charged.
I love the 4GLTE from Verizon and I love the iPad, but I'm actually using my 1st generation IPad while I am at home so I can leave my new $900 iPad on a table to charge free of incident so I can use the 4G while I'm away from wifi during the day. I have been getting more upset about this because I can not even use the Griffin extended cord to charge the iPad and be far from the plug because only the original apple sync/charge cord will have a better shot at staying in. Absolutely none of my non apple cables will stay in the iPad 3 while having it in my hands.
The plug is at an angle, unlike the first iPad, not sure about the iPad 2. Please let me know if they have same issue.
If anyone else is having this problem with the Gen 3 iPad please let me know because I'm tempted to do something about it with apple and I'm hoping that I just for some reason have a bad cable receiver or something and maybe I can get a replacement and enjoy the iPad as I had expected to. There is no reason why I should be even using my first iPad and I have friends that want to buy it but I am not selling it because I'm unable to sell it because I can't handle the new iPad while it's plugged in, that is ridiculous if it's a common issue so please let me know!

Thanks for the swift reply, I have been looking online and a loose plug seems to be somewhat of an issue with many, I hope mine is actually a problem and not what others are experiencing. It's taken me this long to even reach out for the simple fact I HATE being a complainer but this is just horrible.
Do you have an iPad 3 as well? And is yours not experiencing any issues close to mine?
Thanks again!

HT4528 I have an IPhone 5 and the bluetooth will not stay connected with my 2011 Chrysler 200. I was told by Chrysler service department that it is a problem with the IPhone 5. Is there an update or a fix so i can use the bluetooth in my vehicle?

I have an IPhone 5 and the bluetooth will not stay connected with my 2011 Chrysler 200. I was told by Chrysler service department that it is a problem with the IPhone 5. Is there an update or a fix so i can use the bluetooth in my vehicle?

Iran uses GSM, so the iPhone 5 will work. It is already unlocked. Just put local Iranian SIM in phone.

Been using LR since 2004. My raws are all of sudden jumping around in Develop module. Image does not stay, it goes forward and backwards randomly, even with magic mouse off. Can't edit. Using MacPro, currently everything. Canon 5dmk3 raws

Been using LR since 2004. My raws are all of sudden jumping around in Develop module. Image does not stay, it goes forward and backwards randomly, even with magic mouse off. Can't edit. Using MacPro, currently everything. Canon 5dmk3 raws

This sounds like a hardware issue. I haven't seen this particular problem reported before.

My iMac is not staying connected to my wireless internet. Any suggestions? My provider says it's a computer issue and not their problem.

My iMac is not staying connected to the wireless internet. My provider tells me it's a computer issue and not their problems. Any suggestions?

Please test after taking each of the following steps that you haven't already tried. Stop when the problem is resolved. Back up all data before making any changes.
Step 1
Take the applicable steps in this support article. The Wireless Diagnostics program generates a large file of information about your system, which would be used by Apple Engineering in case of a support incident. Don't post the contents here.
Step 2
Disconnect all USB 3 devices. If you don't know which are USB 3, disconnect all USB devices except keyboard and mouse.
Step 3
If you're not using a wireless keyboard or trackpad, disable Bluetooth by selecting Turn Bluetooth Off from the menu with the Bluetooth icon. If you don't have that menu, open the Bluetooth preference pane in System Preferences and check the box marked Show Bluetooth in menu bar. Test. If you find that Wi-Fi works better with Bluetooth disabled, you should use the 5 GHz Wi-Fi band. Your router may not support it; in that case, you need a new router.
Step 4
Open the Network pane in System Preferences and make a note of your settings in the Wi-Fi service. It may be helpful to take screenshots of the various tabs in the preference pane. If the preference pane is locked, unlock it by clicking the padlock icon and entering your administrator password. Delete Wi-Fi from the service list on the left by selecting it and clicking the minus-sign button at the bottom. Then recreate the service by clicking the plus-sign button and following the prompts.
Step 5
Reset the System Management Controller.
Step 6
Reset the PRAM.
Step 7
Launch the Keychain Access application. Search for and delete all AirPort network password items that refer to the network. Make a note of the password first.
Step 8
Make a "Genius" appointment at an Apple Store, or go to another authorized service center.

Ichat not staying connected with OS Lion

Hello, this week I updated my MacBook Pro to OS Lion (finally!) but now my ichat will not stay connected. It had been suggested in another chat discussion to force quit imagent within the Activity Monitor. I have done this multiple times with no luck. IChat still only stays connected for a max of 5 min! Any other suggestions? Thanks!
Melissa

Hi,
I would test some other situations ton see if you can "prove" it is somewhat linked to Mail or at least something the OS is doing regularly.
I would try different time settings in Mail
I would try iChat without Mail being Open.
The first may highlight it is the Check that Mail does that "upsets" the Internet.
The second may exclude the Mail App and highlight that it is something the OS is doing separate from that.
If you manage to exclude Mail as the cause then look in System Preferences > Date and Time and check if it is using a Time Server ? (in the Date and Time Tab/Button).
Does this fit with the Time Zone you are in ?
If they appear to be OK check the Date and Time settings in your Modem or router.
9:31 PM Thursday; March 22, 2012
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 iMac 2.5Ghz 5i 2011 (Lion 10.7.3)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

HT4061 my memory is low on my ipad and i can not stay connected to the internet. How do I fix this problem

My ipad will not stay connected to the internet. the message in the settings says low memory. How do I fix this problem?

Go to Settings > General > Usage and you will see the memory consumers. Remove some of the big stuff.

How do you resolve the problem of ipad not staying connected to internet. other laptops remain connected but ipad just disconnects after about 5 seconds.

how do you resolve the problem of ipad not staying connected to internet when other devices are connected. Ipad disconnects after about 5 seconds.

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
Additional things to try.
Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
On your iPad go to Settings > General > Reset > Reset network settings and see if that enables you to connect.
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
 Cheers, Tom

Is it possible to save a Photoshop project with multiple tabs (inducing images) for later use. Now, when I close Photoshop, it ask to save each tab separately and they are not staying in the project for later usage. Thanks in advance for you help.

Is it possible to save a Photoshop project with multiple tabs (inducing images) for later use. Now, when I close Photoshop, it ask to save each tab separately and they are not staying in the project for later usage. Thanks in advance for you help.

You should ask in Photoshop General Discussion
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

Problems with Image Matte not staying connected to project.

Similar Messages

Maybe you are looking for