Problems with Image Processor in Bridge CS5

I just installed Photoshop and Bridge CS5, and I'm having a couple of problems. First, I can't update to Bridge 4.02. I've downloaded the installer and tried to run it, but I get an error message. All it says is that it can't run the update. The same thing with the Camera Raw updater. The most immediate problem I'm having is that Image Processor in CS5 seems to run differently from how it runs in CS4. Specifically, if I select a bunch of files in Bridge, and ask Image Processor to run an action on them and save to the same location, which is what I've been doing ever since CS2, it opens the files in Photoshop, and leaves them open. This means that pretty soon I've got far too many fiiles open, and my Mac can't cope with it (an iMac Core Duo 2.16Ghz with 4 GB of ram). It also gives me an error message at the end saying it can't process the relevant files, even though it has processed them! In previous versions of Image Processor, it would open the files to run the action, convert to sRGB, etc. and then close each one after saving it to a new folder named "JPEG". How can I get the latest version to behave like this?

Nevermind... I restarted Flash and it miragically appeared! Yay CS5!

Similar Messages

Problem using Image Processor from Bridge

I have been using the Image Processor to process photos from Bridge for quite some time. However, I recently received an error message when I try to initiate Image Processor from Bridge and I have not been able to find any help topics that address my problem: I select images in Bridge to process, then click "Tools>Photoshop>Image Processor". Photoshop opens and the familiar Image Processor dialog box opens. Item 1 in the dialog box says "Process files from Bridge only" and has the number of files I have selected in parenteses. I select the file type and other settings in #3, and preferences in #4. When I click "Run", I get an error message window that says: "Script Alert. There were no source files that could be opened by Photoshop". The Image Processor works if I open the files in Photoshop first, then run it by selecting "File>Scripts>Image Processor" and tell it to process all open files.
Would someone be able to help me with this problem?
Thanks, Larry

Usually when it worked before and not now, and you have added no new software or hardware I recommend resetting the preferences. Hold down the Ctrl key and click on the Bridge icon to start. You should get a reset window with 3 options.

Problem with Image Processor CS5

From Bridge I use tools/photoshop/image processor and convert raw with xmp files to jpegs after entering description and keywords in Bridge File Info. Suddenly, PS is not longer putting this information into the jpeg files. Why?

I'm beginning to think CS3 just isn't capable of handling long actions. Just to give you an idea what I'm doing is watermarking my photos with 3 items: a text logo, url and name. each of them consists of the same steps with the difference only being on their shape, size and position. so you can imagine 3 separate actions combine into 1. to test out my hypothesis, I deactivated 2 of them and tested for each one without any problem. next, I combined any 2 and failed. so my conclusion is CS3 just can't handle long actions as well as CS2.

Image Processor from Bridge CS5

Lately, I have been getting this error message when trying to access the Image Processor (PS CS5)from Bridge CS5: "Sorry something major happened and I can't continue". I called Adobe support and was told that it might be related to third party plugins. The puzzling part is that I have been using all of the above with no problems for over a year . . I am using a Mac Pro, OS 10.6.4, with 10 G of RAM, and have the latest updates to PS and Bridge. Any suggestions?

One way around the problem would be to use a different processor..
There is the New Image Processor Pro and Dr Browns 1-2-3 processor @
http://www.russellbrown.com/tips_tech.html
Also Picture Processor @ http://www.scriptsrus.talktalk.net/index.htm

Problem with Image Processor

I usually use Image Processor to apply an action on tons of files on CS2. When I upgraded to CS3, I simply copied the actions over to the new action folder. Problem is, with long actions, CS3 doesn't close each file after it has performed the action unlike CS2, leaving the desktop filled with processed photos. Also a dialog box appear at the end with the message "Sorry, I could not process the following files:(list of files)". still, the processed files are saved in the destination folder. But here's the funny thing, when I run short actions, everything is ok.
what could be wrong? I tried changing a few things in Image Processor dialog box but always get the same result. again, with shorter actions at the exact settings, the results are fine.

I'm beginning to think CS3 just isn't capable of handling long actions. Just to give you an idea what I'm doing is watermarking my photos with 3 items: a text logo, url and name. each of them consists of the same steps with the difference only being on their shape, size and position. so you can imagine 3 separate actions combine into 1. to test out my hypothesis, I deactivated 2 of them and tested for each one without any problem. next, I combined any 2 and failed. so my conclusion is CS3 just can't handle long actions as well as CS2.

Problem with Process 2012 in Bridge CS5

I can't use Process 2012 in CS5 Bridge. It always makes me go back to 2010. I think I have the latest ACR, and use this in LR4. Anyone else experience this?
Thanks,
Dave

As far as i know process 2012 was only in camera raw 6.7 to make cs5 compatible with images sent from lightroom 4 to photoshop cs5, but you can't adjust
any of the process 2012 adjustments in camera raw 6.7.
Of course photoshop cs6/cc is fully process 2012 enabled, so one can do all the adjustments that are missing in camera raw 6.7
(camera raw 7.x and 8.x)
more info:
http://forums.adobe.com/message/4260541#4260541

Problem with image processor - photoshop cs6

Hi there .
I am trying to automate - image processor. From open files i am just trying to save theese pdf's as jpg's. Should be straight forward but I get this error...
"There were no source files that could be opened by Photoshop."
Anyone know why? I saw one google someone suggesting to reset the preferences or someting but I so not know how to do this or if it will help...
thanks.

It look like both the Image Processor script and the Image Processor Pro script will not process open document that have no associated backing file. When you open a PDF file and use options for Photoshop to use opening the PDF the documents that open are new document the source PDF files have been processes into a new documents that have not been saved so the open document has no associated backing file.
I mad a simple test. Opened a PDF. Tried the two scripts they failed. Then I saved the open document and the ran the Image processor on the still open document that had been saved as a tif. The image processor worked and saved a jpg.
It may be possible to write a small script to save open Document as jpeg files and close the open documents or loop around the open document ring and just save document that have no backing file.
You could also try using Paul Riggott PDF Processor script to do it all....

Problem with Image File in Encore CS5

I made a 6 GB Image File in order to make BluRay discs without having to open Encore each time. I can't seem to find software that will allow me to use the file to burn the disc. Simple copy/paste doesn't work either. The problem may be that the image file has no file extension. Checking properties in Windows 7, where the file extension is usually displayed, it just says "file". Can anyone explain why Encore is exporting a file with no file extension (like .iso, for example), and how to get around this issue?
Thanks.
Steve Siegel
[email protected]

Encore creates a bluray image with an iso extension. I wonder if you have windows explorer set to show no extension.
You may not have "iso" associated with a program on your computer.
Also, you cannot burn the "file" to a BD and have it play. You need a program to take the image and burn it in the correct bluray format onto the disk.
Most of us love imgburn:
http://www.imgburn.com/

CS5 Crashes using Image Processor from Bridge

Photoshop CS5 64 and 32 crashes when using the image processor from Bridge after 200 images or so. Converting 1000 RAW files to PSD or PSD to JPEG takes multiple reloads. any ideas?

I've encountered a non-repeatable variation of this problem from time to time: crash occurs at startup of image processor when Photoshop is open and has been running for some time. (I've not seen the error where Bridge > Image Processor causes launch of Photoshop.) Once I've started a run it has not failed to complete all images (but I'm not converting RAW files and not as many files as 1000). ScriptingSupport.8li is listed in event log problem signature.

Using Image Processor from Bridge

I'm trying to use the image processor from within Bridge. I have done this several times in the past, as recently as last week.
I have some files selected in Bridge. I select "Tools>Photoshop>Image Processor" and the dialog box opens. Step 1 indicates that I have files to process (10 in this instance), and I have JPEG selected as the file type to process. When I click "Run", I get an error message that says "Script Alert" in the title. The message in the window says "There were no source files that could be opened by Photoshop".
I opened the same 10 files in Photoshop, and I was able to run the Image Processor on them while they were open in Photoshop. I'd rather not do this unless I have to.
I haven't added any new programs or plug ins since the last time I used the Image Processor from Bridge.
I had the same problem in early June, and the solution suggested then fixed the problem. I'm experienceing the same problem today, and the same solution doesn't seem to be working now.
The previous solution was to reset the preferences by holding down the Ctrl key and clicking on the Bridge icon to start. A reset window with 3 options popped up. Now, w
I would sincerely appreciate any help you could give me with this.
Thanks,
Larryhen I hold the control key down and click on the Bridge icon, I don't get the reset window. I tried it by control-clicking on the Bridge icon from within Photoshop, and I tried it by control-clicking on the Bridge icon from my desktop with Photoshop closed.

Read you original post again and your last post and now I am confused.
You said you reset your Bridge preferences, yet in post #1 you said " I hold the control key down and click on the Bridge icon, I don't get the reset window. I tried it by control-clicking on the Bridge icon from within Photoshop, and I tried it by control-clicking on the Bridge icon from my desktop with Photoshop closed.
So with this said you have not reset the preferences unless you have gone in and deleted the file. The Bridge Icon is the one one the desktop that you click to start Bridge.
BUT, in last post you say you have a Mac. So to reset preference believe it is Cmd key.
No matter how you do it you need to get the reset window with the 3 reset options.

Shortcuts for Batch and Image Processor in Bridge CS6

I use Batch and Image Processor all the time, and I'd like to use a shortcut.
Can you tell me if there is a shortcut or how I can program one?
I set up shortcuts for those two commands in Photoshop, but they don't work in Bridge.
I remember from the time I started with Photoshop and had Deke McClelland's book with his set of shortcuts. There was a shortcut that worked with image processor, but it was just a set you did install and no explanation. When I moved to a different computer and a newer version of Photoshop, these keys got lost.
Is there any way to automate Batch and Image Processor?

There is no way to economically batch process in Bridge without having to go thorough sub-menus.
I'm sorry you can't get it to work, but on my system it works flawless.
Testing a bit more it seems you don't need to use a unique shortcut at all. I also tried to use the shortcut for Batch I created in PS itself to get the Batch window to front for running actions on open files. For me that is [control + Cmd + B] but feel free to find an other one.
When I discovered you don't need the unique shortcut at all I used the same shortcut for Bridge CC. . Also created [Control + Cmd + i] for the Image processor.
Both started without problems.
To extend I also created both same shortcuts for Bridge CS6. This also was working correctly, off course, having only PS CC open using the shortcut in Bridge CS6 it auto started PS CS6.
So can you specify a bit more about what OS you are using on what computer (I have OSX 10.8.4 on a MacPro 2012)
Some screenshots to show the shortcuts in System prefs and how the show in the Bridge Submenus:

Problem with Adobe Aplication Manger/Updater cs5

i have just installed my CS5 Premium on my new (purchased used) macbook pro after a clean install (OSX 10.8.5)
All the programs works fine but the Aplication Manger say there is updates for all the programs so i open it and and start the updates
it downloads as it shud (according to the progress bar) but when i shud install the updates it gives me the following error messages:
The following updates where unable to install. If you whiz to install these updates, pleas fix the problems below an retry:
Adobe Bridge CS5 4.0.5 Update
There was an error downloading this update. Please quit and try again later.
Adobe Extension Manager CS5 5.0 Update
There was an error downloading this update. Please quit and try again later.
Adobe Illustrator CS5 15.0.2 Update
There was an error downloading this update. Please quit and try again later.
Adobe Pixel Bender Toolkit 2.5 Update
There was an error downloading this update. Please quit and try again later.
Adobe® InDesign® CS5 7.0.4 update
There was an error downloading this update. Please quit and try again later.
Dreamweaver CS5 11.0.4 Updater
There was an error downloading this update. Please quit and try again later.
Fireworks CS5 11.0.2 Update
There was an error downloading this update. Please quit and try again later.
Photoshop 12.0.4 update for Photoshop CS5
There was an error downloading this update. Please quit and try again later.
Photoshop Camera Raw 6.7 Update
There was an error downloading this update. Please quit and try again later.
I have tryde quitting and tryde again several times with no luck
Anny ideers on how to fix this ?

My Application Manager says somthing else. It's downloading the updates but then the installation fails. Normaly I can live without the upgrades, but my Camera RAW format is not compatible with the old version of Cameraw Raw and I realy need ad least this one.

Problem with images opened in Photoshop CS 5

Hi, I have a problem with images that I open in Photoshop CS 5. F. ex. I opened
the following image:
The image appears with a purple color in Photoshop. If I hover over the image
with a tool like lasso, it temporarily regains it´s original color. The image mode is RGB Color, 8 Bits/Channel.
I resetted the start settings of Photoshop with the CTRL-Shift-Alt-combination, which had no effect.

The confusion arises from the imprecise error message in the Preferences > Performance dialog box, to wit:
OK, that seems to be open to misunderstanding indeed.
The video card: Citrix Systems Inc. Display Driver.
Could not find a list for CS6 specifically, but the card may fall short.
http://helpx.adobe.com/photoshop/kb/tested-video-cards-photoshop-cs5.html
If I invoke View > Proof Colors, the only thing that changes is that the text in the brackets
Also if you set View > Proof Setup to something different?
Boilerplate-text:
Are Photoshop and OS fully updated and have you performed the usual trouble-shooting routines (trashing prefs by keeping command-alt-shift/ctrl-alt-shift pressed while starting Photoshop, 3rd party plug-ins deactivation, system maintenance, cleaning caches, font validation, etc.)?

Problem with Image file

Hi,
Iam facing with one problem.I have one swing interface through which I can upload files(back end servlet programme).Now I can upload all types of file but problem with image file it uploading perfectly that means size of the uploaded file is ok but its format damaged.It can not be open.My backend servlet programme is ok coz i tested it with html form it is working perfectly.Problem with swing interface.Plz guide me where I done a mistake.Below r my codes:-
ImageIcon Upload=new ImageIcon("images/Upload.gif");
     Button=new JButton(Upload);
     Button.setToolTipText("Upload");
Button.addActionListener(new ActionListener()
public void actionPerformed(ActionEvent e)
          int returnVal = fc.showOpenDialog(ActionDemo4.this);
          if (returnVal == JFileChooser.APPROVE_OPTION) {
          File file = fc.getSelectedFile();
String aa=file.getAbsolutePath();
          textArea3.append(aa);
               textArea2.append("Local URL:");
long l=file.length();
          try
          byte buff[]=new byte[(int)file.length()];
          InputStream fileIn=new FileInputStream(aa);
          int i=fileIn.read(buff);
          String conffile=new String(buff);
          String str1=textArea10.getText();
url = new URL ("http://127.0.0.1:7001/servletUpload?x="+str1);
     urlConn = url.openConnection();
     urlConn.setDoInput (true);
     urlConn.setDoOutput (true);
     urlConn.setUseCaches (false);
     urlConn.setRequestProperty("Content-Type","multipart/form-data;boundry=-----------------------------7d11e410e500f2");
     printout = new DataOutputStream (urlConn.getOutputStream ());
String content ="-----------------------------7d11e410e500f2\r\n"+"Content-Disposition: form-data;"+"name=\"upload\"; filename=\""+aa+"\"\r\n"+"Content-Type: application/octet-strem\r\n\r\n\r\n"+conffile+"-----------------------------7d11e410e500f2--\r\n";
printout.writeBytes(content);
printout.flush ();
printout.close ();
Best Regards
Bikash

The errors are here:
          byte buff[]=new byte[(int)file.length()];
          InputStream fileIn=new FileInputStream(aa);
          int i=fileIn.read(buff);
          String conffile=new String(buff); (conffile is a String object containing the image)
and here:
String content ="-----------------------------7d11e410e500f2\r\n"+"Con
ent-Disposition: form-data;"+"name=\"upload\";
filename=\""+aa+"\"\r\n"+"Content-Type:
application/octet-strem\r\n\r\n\r\n"+conffile+"--------
--------------------7d11e410e500f2--\r\n";
printout.writeBytes(content);conffie is sent to the server but
it's non possible to treat binary data as String!
Image files must be sent as byte[] NOT as String ......

Problem with image url

Hello,
today I have a problem with image url. I wanted Image to change when mouse dragged over it. But nothing happened. Any ideas?
def maxIco: ImageView = ImageView{
image: Image{
url: "{__DIR__}ikony/max.png"
onMouseDragged: function(event: MouseEvent){
maxIco.image = Image{
url: "{__DIR__}ikony/max2.png"
}

This is working for me:
src/main/Main.fx
src/main/icon/image1.bmp
src/main/icon/image2.bmp
//Main.fx
package main;
import javafx.stage.Stage;
import javafx.scene.Scene;
import javafx.scene.image.Image;
import javafx.scene.image.ImageView;
import javafx.scene.input.MouseEvent;
var changed = false;
def imgView: ImageView = ImageView {
    image: Image {
        url: "{__DIR__}icon/image1.bmp"
    onMouseDragged: function (e: MouseEvent): Void {
        if (not changed) {
            imgView.image = Image {
                url: "{__DIR__}icon/image2.bmp"
            changed = true;
            println(imgView.image.url);
    onMouseReleased: function (e: MouseEvent): Void {
        imgView.image = Image {
            url: "{__DIR__}icon/image1.bmp"
        changed = false;
        println(imgView.image.url);
Stage {
    title: "ImageTest"
    scene: Scene {
        width: 700
        height: 600
        content: [
            imgView
}I've changed few things to switch image only one time on mouseDragged event.
It print the image URL.

Problems with Image Processor in Bridge CS5

Similar Messages

Maybe you are looking for