Problems with iMessage and Contacts after changing Apple ID

I went in on my computer to change my primary e-mail for Apple and it prompted me to change my password. After I changed the e-mail and the password, my iMessage stopped working on my computer and my iPhone. On the computer, iMessage now works through my iCloud e-mail only. I really wish it would go back to working through my cell phone number. Additionally, now all my contacts have been deleted, on the computer and the iPhone. Is there any way I can get iMessage to work through my cell phoone number on my computer again and get my contacts back on either device?

Well did you change the apple id in imessage?
settings - message - add your new id and delete the old id.
Or turn off imessage and then back on to reactivate with your new id.

Similar Messages

  • I am facing problem with wifi and cellular after update  Apple iOS 8.0.2

    How can we resolve the issue with wifi and cellular reception after update the iOS 8.2 on iPhone 5s 32 GB

    Try some basic troubleshooting:
    (A) Try reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    (B) Try reset all settings
    Settings>General>Reset>Reset All Settings
    (C) Setup as new (data will be lost if you do not have backup)
    Settings>General>Reset>Erase all content and settings

  • Problem with Facebook and instagram after istalling iOS 7.1. Can not open them!

    Problem with Facebook and instagram after istalling iOS 7.1. Can not open them!

    Hi Hanjon!
    Here is an article that will help you troubleshoot these purchased apps:
    iOS: An app you installed unexpectedly quits, stops responding, or won’t open
    http://support.apple.com/kb/ts1702
    Thanks for being a part of the Apple Support Communities!
    Regards,
    Braden

  • Problem with Rescue and Recovery after installing Norton Internet Security 2010

    Hi all.
    It's my first time in this forum.
    I have a problem, with Rescue and Recovery, after installing Norton Internet Security 2010 on my T43.
    The message I get it:
    "Rescue and Recovery is unable to back up the file 'C:\Documents and settings\all Users\Application Data\ Norton\ 00000082\00000109\000003c1\cltMLS1.bat' Because the file is either corrupted or being used by another application. Please close any application that could be using the file.
    I tried to close the Norton but I couldn't find how.
    Tanks
    Doron71

    Hi and welcome to the forum,
    the reason for this situation is, that the antivir files are protected from being modified.
    This is the reason, why this file cannot be backed up. I assume, that you would get much more such messages, as there are surelly multiple files files, that are protected like this.
    So the solution is to block folders from being archived. Please start RnR application and in the configuration set this folder as the excluded one.
    This will skip the backup of this file and will fix your situation.
    Please let me know, if you have covered this.
    Cheers

  • TS1453 Hi, I bought Apple tv traying to rent a movie but there problem with itunes, and there is on apple tv don't have my country. could you help me please how can I solve this problem?

    Hi, I bought Apple tv traying to rent a movie but there problem with itunes, and there is on apple tv don't have my country. could you help me please how can I solve this problem?

    Whinston,
    I live in Azerbaijan. Recently I bought apple tv in New York. When I come back to my country tried to rent movies from my country but couldn't find my country name on apple tv menu, so there is a problem I don't know how to fix it. is there have another way to take a rent movies?

  • I can't get my iMessage to work after changing Apple ID passsword

    How can I get my iMessage to work after changing my apple password?

    Well did you change the apple id in imessage?
    settings - message - add your new id and delete the old id.
    Or turn off imessage and then back on to reactivate with your new id.

  • Problem with navigation and masthead by changing languages with Anonymous

    Hi All,
    i have a problem with navigation and masthead by changin the language when accessing as anonymous user.
    Ive created two additional users anon_de  (with language german )and anon_en (for english).
    I've created also two links in the in masthead:
    /irj/portal/anonymous?guest_user=anon_en and /irj/portal/anonymous?guest_user=anon_de
    When i choose "de" for the first time it works fine, but when i choose "en" again the language in the content are is changing to english again, but not in navigation and masthead. When i click again on link for "en" the languge is set to english. Strange thing is that when i click on "de" instead the portal content change to german but masthead and navigation are in english now, as it should be before....
    It seems that masthead and navigation have always prevoius language selected.
    Do you know, what could be the reason of that strange behavior?
    Thanks for help
    Karol

    Hi Detlev,
    you are right. the user is not "updated" fast enough... the strange thing is, that it works by the first time i change the language...
    well.. i can implement that workaround as you suposed, but it would be a really workaround as the same page will be requestes second time, causing requests number to be double..
    Thanks for help
    ps. i forgot to mark this message as question to give points.. if you tell me how i can change that ill reward your answer..

  • Problems with email and SMS after 1.3.5

    Let me first say that I love the Pre. Up until this point it has been perfect - I have a replacement, but that is because I dropped it (wrong angle, wrong location, broken screen). However, following the 1.3.5 update I'm now having a fairly important problem with email and sms - I can receive email and messages, but not send them.
    I have two email accounts. My personal account is with earthlink. My work account goes through an ISP using the domain name of my employer. I'm not using Microsoft Exchange or Outlook. I have tried deleting and reentering the accounts and that did not work. I can receive messages but get error messages when I try to send. 
    The same for messaging. I don't use it very often. But yesterday I get a text message  and tried to respond and got the error message.
    I power the phone off every night because I have a landline and use that as the primary phone at home.
    I have been looking around message boards trying to find a fix for this.  Has anyone had this issue and resolved it?
    Thank you.
    Post relates to: Pre p100eww (Sprint)
    Message Edited by starburst42 on 01-05-2010 07:06 AM
    This question was solved.
    View Solution.

    I forgot to add that this is a stock Pre. There are no patches or homebrew apps. 
    Edit:
    I found a fix for the email problem, in posts on precentral and this board from a few months ago. The info came up in a Google search, and not searches of the boards, which is kind of frustrating.  Here is the info, and the link.  I really wish Palm would put info about this work around on their site, or at least make it easy for people to find.  The solution is the last message in the thread linked below:
    Had the same problem.  Checked with Earthlink - no help.  Checked with Sprint - no help.  Checked with Palm - no help.  Here is what finally worked:
    Delete the earthlink account and start over.  When you do - this is the key - set up the account manually!  If you use the Pre defaults and try to change the settings it will not correct the problem. Your settings for outgoing mail must be:
    "smtpauth.earthlink.net"
    Use Authentication set to "on"
    username is your email address
    your email password
    port set to "587"
    encryption "none"
    Again, the key is to set up manually.
    smtp email fix
    Message Edited by starburst42 on 01-06-2010 12:08 PM
    Message Edited by starburst42 on 01-06-2010 12:09 PM

  • Can't open email and contacts after changing email address in iCloud

    I changed my email address in iTunes and iCloud and now I cannot open email and contacts.  The beachball appears and after about 2-3 minutes I get a message that the program cannot open.  I'm ready to throw my iMac out the window.  It is only a couple months old.

    Back up all data.
    Boot into Recovery by holding down the key combination command-R at the startup chime. Release the keys when you see a gray screen with a spinning dial.
    Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.
    When the OS X Utilities screen appears, follow the prompts to reinstall the OS. You don't need to erase the boot volume, and you won't need your backup unless something goes wrong. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.

  • IMessage not working after changing Apple ID email

    After changing my Apple ID email from Yahoo to Live, I haven't been able to receive any iMessages, but I have been able to deliver them.

    I recently changed my Apple ID and, initially hit all sorts of problems (ML & iOS5.1). AppleTV very confused, Calandar duplicating entries on an iPad, but losing them on the Mac (but being correct on iCloud.com).
    The solution ended up being straightforward, if unnecessarily annoying.
    On the Mac - in SysPrefs (iCloud) turn off all syncs and sign out. Delete items from the Mac (in response to the prompt).
    On the iPad - in settings do the same.
    On the ATV - turn off Home Sharing.
    In iTunes - log out of the Apple Store
    Sign out on iCloud.com and sign back in using a @me.com email address (not the Apple ID)
    Reestablish iCloud sync (etc) by signing in using the email address (not the ID).
    It appears that everything collects the new Apple ID using the email address and they all play nicely together again.

  • Problems with Siri and Contacts (outside the US)

    I have 3 major software problems (bugs) and i would like to report them in hopes that Apple would release a quick and prompt fix for these problems.
    I think i speak for many when i say ever since the IOS 5 release users have noticed a major issues/problem with the format of their contacts and area/country codes.
    Problem # 1.
    I live in Kuwait, and all my contact details have a country code (GSM) prefix +965 followed by 8 numbers. With the last IOS 5 release whether you add or remove the prefix the contact's name is not displayed on the caller ID. I tried to save the contact as it shows on my Caller ID but the problem presisted. I even tried switching international assist on and off and that didn't work either. There's a huge forum for Apple customers outside the US facing problems with their contacts and caller ID ever since IOS 5 was lanuched.
    Problem #2.
    I have bought my Iphone 4S just few days ago, excited about Siri like many, i asked Siri to call George from my contacts, and Siri replies i'm sorry i can't call george, i tried all my contacts and all attempts failed, i tried adding the country prefix, and removing it and still Siri can't make calls from my own phone book (contacts). I do realize that Siri is in Beta, however, Siri did dial a US number perfectly from Kuwait, which tells me the problem is again related to where you are, and what country code format are you trying to call.
    Problem # 3.
    When setting up Imessage, Kuwait is not listed in the countries of choice, not sure why but it would good if all the countries are listed.

    vindictive1 wrote:
    I have 3 major software problems (bugs) and i would like to report them in hopes that Apple would release a quick and prompt fix for these problems.
    Then report them to Apple here.  This is a user to user support forum.

  • Problem with itunes and iphoto after time machine restoration

    After an apocalyptic type meltdown in my hardrive the other night, I now have a new one. I have restored as much as I had backed up using time machine when I turned my computer back on for the first time. However in iphoto it lists all the different albums I have, but all the photos come up as grey squares. They are definitely on the computer as you can see them in the iphoto originals folder in the finder window.
    A similar problem with itunes. My itunes library is totally blank, with no songs whatsoever. However the songs are there in itunes music folder.
    How can I restore everything back to normal?
    Matt

    Look at Q15 here. http://pondini.org/TM/FAQ.html
    There are separate sections for iphoto and itunes.
    It has to be so complicated because Apple made TM to do too much and be too many things to too many people.. a horse designed by a committee. It has become flakey in later editions.
    If you still have the iMac you can move the files directly from the source.. you don't need to use TM backups at all.

  • HT1199 Why is mail stuck in a do-loop of "There is a problem" with the mail account after changing iCloud password?  How can it be fixed?

    After changing passwords for iCloud, Mail is stuck in a do-loop "There is a [problem..."  The error appears in less than one second after responding "Later"

    Nope.  Turns out that even though I have two Macs running 10.9.4, the one in question doesn't get the SMTP settings changed by iCloud settings when the password is changed, so I had to "Edit" the account in Mail, plow down to the password settings for the Apple SMTP server, and change the password myself.  Nothing in the System Preferences iCloud setting tab lets you change any settings on the local machine.  Apple is sure they are controlling everything when you make changes in iCloud, but they are wrong.  Identical versions of 10.9.4 are configured differently on two different Macs.

  • Reinstallation for IOS skype. problems with groups and contacts

    I was having a problem with Skype on my Iphone; new messages wouldn't load, and if they did it was around 10 minutes after they sent them. So I uninstalled the app and then reinstalled it. As soon as I logged into my account I realized most of my contacts didn't have a profile picture, nor did it have our conversations. It also got rid of all my skype groups; I still got notifications for those groups, but if I clicked on them it would bring me to a page saying that it's an empty group. Also if I get on skype on my laptop everything is fine, I still have my groups, my contacts all have pictures and our conversations are still there. I tried to reinstall it on my phone again, but this time all my groups were still gone, but different contacts wern't complete. Because I still had the contacts I tried to send a message on of my contacts that didn't have a profile picture and although it said it sent, I never got a reply. So I got on my laptop and asked if he got it, and he said he didn't.  Is anyone else haing this problem? If so do you know how to fix it? Thank you

    Ok I just talked to support via chat and apparently this is a known iPhone mobile App issue.  This is exactly what he said to me: "I was informed that this issue already have a ticket to our engineers and they are already working on this one. This has something to do with the latest version of Skype for tablets and mobiles.  We may release another version of Skype app so once an update is avaialble, update the app on your phone ASAP." Hope this ease some frustration.

  • Problems with iMessage and Apps requesting code verification

    Hi all,
    I've just bought an iPhone 4S and tried to activate iMessage and other apps like Viber and Whatsapp with no luck
    Each time I tried to activate iMessage, i was charged an international SMS, and got an "Unsuccessful Activation" or "Error Occurred" message! Even with a great Wi-Fi\3G connections!
    For Viber and Whatsapp, no verification code were receipt yet, I'm still waiting for ever!!
    I'm not sure if it was a configuration mismatch\ or an internet connection or even a malware issue!!
    Please Help!!
    Thanks in advance,
    Ibrahim

    Hi OCRSnob,
    Thanks for visiting Apple Support Communities.
    I would try steps 1, 3 and 5 of the iPhone Troubleshooting Assistant:
    http://www.apple.com/support/iphone/assistant/phone/
    Before restoring your phone (step 5), you may also want to try troubleshooting your data connection:
    iPhone: Troubleshooting a cellular data connection
    http://support.apple.com/kb/ts3780
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/ts1398
    Best Regards,
    Jeremy

Maybe you are looking for

  • Looking for a music player app for the ipad

    Musician looking for music player app to play my sound library Folders, set lists......ect..... Must be able to automatically pause between songs, not like iTunes where you have to manually pause I have to time to manually pause between tracks since

  • ITunes simply doesn't recognize either of my ipods

    Have had iTunes and multiple ipods - haven't synced either of my ipods in awhile, and when I plug either of them into the computer (which has always worked fine in the past), absolutely nothing happens. No error messages, no weirdness, nothing. The i

  • Suggested query (9i) for 3-d Geodetic point-in-poly?

    Hi there, Just getting started with Spatial. Have a SDO_POINT_TYPE layer in 8307 (Geodetic Lat/Lon/Height) 3-dim, indexed with 2-dim (Lat/Lon) and want to know what the best way is to perform point-in-polygon queries on this layer (e.g. basic web-map

  • The color of text item with multi-line in web

    I tried to change the background color of text item with multi- line, but it does not work when I run in the web, if some body knows that, please give a hint. Thanks Frank null

  • Expdp with ORA-04063: package body "SYS.DBMS_CUBE_EXP" error

    Hi, I try to use expdp to export all tables from schema BAW, but hit the following error. Oracle version is 11.2.0.2, and the package body "SYS.DBMS_CUBE_EXP" is invalid. Any idea to fix it? Starting "BAW"."SYS_EXPORT_SCHEMA_01": baw/******** directo