Problems with Import a excel file?
Folks,
I created a form to upload a excel file, the upload works fine , but I have a problem with the first line of the excel file. I created a model with the column names, the headers. When I uploaded this excel file to a folder inside my CF server, the first line is inserted in my DB, how fix this problem?
Tks
Fabiano Magno Pechibella
You've said you have a problem. You haven't said what the problem is.
Similar Messages
-
A problem with importing layered PSD file into Flash
Hi.
There's a problem with importing layered PSD file into Flash.
If I import a layered PSD file, some part the color of the lower layer is shown at the edge of objects or shadows. Instead, if I crop each layers first and import them, there's no problem.
If the higher layer has brush or transparent effects, it becomes worse.
Any help with this problem?
Thanks.How was the original art created? Was the original RGB or CMYK? What is the resolution of the Photoshop file? Flash only works well with RGB and 72 pixel per inch resolution. If your original art is not set this way, then Flash will attempt to convert it as it imports it. Flash uses the sRGB color space. You'll get the best color translation if your Photoshop file is using this color preference.
-
Problem with opening MS Excel files through Portal
Hi All,
I have a user that is complaining about the behaviour of MS Excel files in the Portal. The MS Excel files do not match their behaviour at the windows level. The issue has to do with how MS Excel files never seem to open in a maximized sate when you open them from the portal. The same cannot be said about MS Word files. The behaviour of MS word files is consistent between windows and portal.
Solutions will be REWARDED.
Thanks & Regards,
Krishnen Subramanian.Hi Hussain,
I hav uploaded the excel file into my KM contentafter that when i try to open it , it does not open as maximized.
Let me explain:
I create a new excel file on my desktop:
I open this file:
I maximize the workbook and save:
I close Excel and then open the file right back up:
I notice that Excel and the workbook open up maximized. I close Excel again.
I now upload the file to the portal:
I then open the file from here:
It is noticed that the Excel is not maximized. We would like for it to behave as it does from the desktop. In other words, if it is saved as maximized, it should open from the portal that way. If it is saved as half way open, it should open that way from the portal.
I have found that MS Word documents behave in the portal as they do on the desktop. I create an MS Word file on my desktop:
There appears to be something portal related that prevents MS Excel files from opening maximized.
Hope you will be abl to solve the message.
Thanks & Regards,
Krishnen Subramanian. -
Problem with importing a AVI file
Hi everyone,
I did a capture to hard drive of a VHS home movie via Turtle Beach PCI card software, saving as .avi file that is roughly 2 hrs long, when I import into Premier Pro CS3, I only see the first 2 minutes. Anyone have a suggestions on what I can do to.
Thanks,
GeorgeGeorge,
I just finished a project, similar to yours and used the same hardware, TB PCI, and their software for the Capture. In my case, I chose AVI uncompressed and every file Imported into Premiere fine. Do you recall which CODEC you selected in the TB software. The only problem with AVI uncompressed is very, very large file sizes and I had 32 VHS tapes, some EP and some LP.
Quite a few folk on this forum have had excellent results with the Canopus products, but I already had the TB, so I did not change.
If G-Spot throws a fit, then you probably have a corrupt file. I assume that G-Spot installed OK, and the errors were with your AVI file. If not, try install again with all AV, Spyware, etc. software turned off. Try to Capture again with AVI uncompressed and see if your result is different.
Hunt -
Problems with import of static files/images
I have a series of static files (such as jquery/jquery ui libraries) that we have been storing in WORKSPACE_IMAGES. We had hoped to be able to export the static files and use our automated build process to import the files via sqlplus. However, I have run into problems with the files being "corrupted"...either they don't show up at all in firebug, or one file contains parts of another file, rendering it useless. If I delete these files and re-upload them separately through the builder, then I don't have any problems.
I can only assume there is some perhaps special character or some other issue that I'm not aware of either during the export process or the import process.
My first preference would be to store these files on the app server, but unfortunately that's not on the table at the moment.
Any ideas what would be causing the issues here?
Any help would be appreciated.
Thanks in advance
JeffHello all,
This is an old thread, but it's an old problem that I'm concerned may still be continuing.
We're moving from 3.2 to 4.1. While copying our applications from 3.2 to a test 4.1 installation, we did a static file export for "All static files" from 3.2 and did an import to 4.1. We're seeing the same behavior that I and others have reported in the past - any static files that are javascript are corrupted when "all static files" was chosen. Exporting/importing each javascript static file individually appears to work fine.
If the bug was in 3.2 in that it was generating a corrupted export file when "all static files" is chosen, then I'm not concerned - we're moving from 3.2 anyway. But, if the issue is in the import then it must still exist in 4.1 and that would be a concern.
Does anyone know if this was a recognized bug in 3.2 and has since been corrected?
Thanks!
John -
CS5.5 Extended - problem with importing audio .mov files
I would like to import an audio file to my PS5.5 Extended. It supports .mov files, so I tried to File->Place a mov file exported from Audition CS5.5. But Photoshop says: "Could not place the document xxx.mov because the movie file could not be opened."
The mov file doesn't open in Windows Media Player either and the message is that the codec is unknown. But it opens without problems in QuickTime, as audio.
I am not sure if this is Audition or Photoshop problem, but the format, or codec which is used should be common to both programs, as they are from the same CS5.5 suite. By the way, I have all settings set to default in Audition. No idea what codec it is using.
My purpose is to import sound, and because PS Ext does not support sound files as such, I found a workaround in the internet to import a mov file. But it does not work for me..Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037
What is a CODEC... a Primer http://forums.adobe.com/thread/546811
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037
Report back with the codec details of your file, use the programs below
For PC http://www.headbands.com/gspot/ or http://mediainfo.sourceforge.net/en
For Mac http://mediainfo.massanti.com/
Do you have Quicktime installed? -
Problem with importing a dmp file
Hello,
I am trying to import a dmp file to make an excercise.
I've tried and read manuals all day now, but it seems I still do something wrong
First, In the Enterprise Manager console, I create a new user (CREATE LIKE scott):
<img src="http://users.skynet.be/wouterjans/orcl/oracle03.JPG">
Then I create a new Table: dummy with 2 fields: A en B (varchar2 and size10)
<img src="http://users.skynet.be/wouterjans/orcl/oracle04.JPG">
After that, grant dba to the new user
grant dba to DEMO;Then I Run CMD and go to the c:\oracle\ora92\BIN folder
<img src="http://users.skynet.be/wouterjans/orcl/oracle01.JPG">
I import the dmp file (STAG3536.dmp)
and it says it succeed
<img src="http://users.skynet.be/wouterjans/orcl/oracle02.JPG">
So normally its ok
Then I go to my Form builder and I open a new Form
When I try to run the data wizard now. I only see the "dummy" record I created before but I dont see the database from my imported file.
<img src="http://users.skynet.be/wouterjans/orcl/oracle05.JPG">
Could anyone help me pls ??
Thanks in advance,
Wouter
Message was edited by:
wouter81dont go in bin directory you can run imp cmd from any where
if you want to import in scott scheme
you do this
connect system/password@dbname
list of contents = n
import grant = y
import table= y
import entire export file = n
user = scott
check to this i hope you will success.
Rgds -
Problem with importing a scrolling file
Hello, I hope you could help me because i am really stuck
into it:
I have a scroll file, taken from a tutorial, which is linked
to a class. After having customized my file I did try it and it
works fine. The problem is starting when I try to import this file
to an empty MCL in my website. When I have imported all the
elements they do not respond and act like single pieces (es. the
scroll bar is detached from the scroller). What can I do? I am
attaching all the codes and I hope you can help me .
Googling around i found the element that I think it is the
reason I cannot import a proper classed swf.
The function is Event.ADDED_TO_STAGE. the only major thing is
that I do not know how to change my loader class to contain this
missing bit.
thank you so much
p.s all the classes and the file are in the same
directoryI get this code when I preview the fiel I hope that is what
you meant:
openHandler: [Event type="open" bubbles=false
cancelable=false eventPhase=2]
progressHandler: bytesLoaded=0 bytesTotal=896446
progressHandler: bytesLoaded=65536 bytesTotal=896446
progressHandler: bytesLoaded=131072 bytesTotal=896446
progressHandler: bytesLoaded=196608 bytesTotal=896446
progressHandler: bytesLoaded=262144 bytesTotal=896446
progressHandler: bytesLoaded=327680 bytesTotal=896446
progressHandler: bytesLoaded=393216 bytesTotal=896446
progressHandler: bytesLoaded=458752 bytesTotal=896446
progressHandler: bytesLoaded=524288 bytesTotal=896446
progressHandler: bytesLoaded=589824 bytesTotal=896446
progressHandler: bytesLoaded=655360 bytesTotal=896446
progressHandler: bytesLoaded=720896 bytesTotal=896446
progressHandler: bytesLoaded=786432 bytesTotal=896446
progressHandler: bytesLoaded=851968 bytesTotal=896446
progressHandler: bytesLoaded=896446 bytesTotal=896446
TypeError: Error #1009: Cannot access a property or method of
a null object reference.
at Scrollbar$iinit()
at
flash.display::Sprite/flash.display:Sprite::constructChildren()
at flash.display::Sprite$iinit()
at flash.display::MovieClip$iinit()
at tee_fla::MainTimeline$iinit()
TypeError: Error #1009: Cannot access a property or method of
a null object reference.
at tee_fla::MainTimeline/tee_fla::frame1()
initHandler: [Event type="init" bubbles=false
cancelable=false eventPhase=2]
httpStatusHandler: [HTTPStatusEvent type="httpStatus"
bubbles=false cancelable=false eventPhase=2 status=0]
completeHandler: [Event type="complete" bubbles=false
cancelable=false eventPhase=2]
[object Stage]
thank you so much -
Sudden problems with importing/editing audio files
I podcast my lectures, which run about 1 hr 15 mins. My SOP was to drag and drop an mp3 or AAC version of the original audio capture into Garageband and then split the file into two separate podcast episodes. Since the big Apple Software upgrade, however, this procedure doesn't seem to work. The file imports and plays, but I can no longer split it into multiple regions (it also shows a flat line for the entire track). Any ideas?
I am having the same problem. Looking for a fix and will post as soon as possible. This all happened after the new software update.
M -
Problem with import of AVi file
I have bought a cheap video camera Creative Vado. I can copy film file in AVI to my computer . I can see the file, but I can`t import it in iMovie. Can someone help me - I will be greatful!
first rule of using a forum: read recent topics !
http://forum.java.sun.com/thread.jspa?threadID=668488&tstart=0 -
Import an excel file which contain resource data to P6
Hii,
I had a problem of importing an excel file into p6 which contain resource data to p6.
I used the import option which is present in file-import i followed the instruction and at last while clicking the finish tab its showing the import was successful.
But in the resource it is emplty unable to display a single resource.
plz help me or is there any other procedure for it plz let me know.
Best regards
HimansuAs the previous poster stated, you need to export using resource assignments not activities. The only changes that P6 will accept will be to information about activities (Description, duration, etc) if you choose activities. Choosing Resources will allow changes to information with resources and resources asignments will allow changes to information pertaining to the interaction of the activities and resources.
-
Tempo problems with imported wav files
Hey everyone, sorry if there's a quick fix for this in the forums that I couldn't find, but I've been having some tempo problems with imported .wav files.
Long story short, my system couldn't handle playing all the tracks for a song while recording drums, so I bounced out an mp3 of the song and put it in a new Logic file so my drummer could just play along to that as I recorded him. Unfortunately, the original song is at 167 bpm, but I forgot to change the bpm in the new Logic file with the .mp3 file of the song to 167 bpm, so it was left at the default 120 bpm.
So, the drums were recorded at the correct 167 bpm, but Logic thinks that those new drum .wav files should be played at 120 bpm, so when I import my drum tracks back into the original file, they do not play correctly at all.
I could get record it all again, but I wanted to check if there was a way I could salvage what I already have, since my drummer lives about an hour away right now and can't just come over whenever he wants.
Thanks for the help! I really appreciate it.Hi,
First, do not use MP3 in Logic, the sound quality is less than AIFF, WAV or CAF, and Logic has to decode it for playback, making it a heavier burden on the CPU than an uncoded audiofile, such as AIFF, WAV or CAF.
Secondly, audio files are independent of Logic's tempo. If you bounce down an audio file in any format (other than Apple Loop), it will play back at the same speed, +regardless of Logics' tempo setting+, either at recording or playback. Logic doesn't 'think' anything. The BPM is only important to MIDI tracks, or to the spacing between audio files. The audio files themselves *are not affected* by the tempo setting. If you import an audio file of tempo 167 into a 120 BPM project, the file will still play at 167, only Logic will indicate the wrong bar positions.
regards, Erik. -
Problem with import file type setting
Problem with import file type settings - In preferences>general I select "wav encoder" But then going to tools>Create it still says "create mp3 version".
Can't find a way to overcome this. Thanks for any help.Doublechecking, roy. After making the preferences change, are you leaving the General tab by clicking the OK button down the bottom-right-hand corner of the tab?
-
Hi, I have problem with importing MOV files from SJCAM 4000. MOV files are in supported formats for Adobe Premiere Elements 11. But if I'm importing MOV file, only audio part is imported, video part is not imported. How can I solve this problem?
haben
From looking at the specifications of your camera (SJCam 4000), we know already what video compression your camera is using. It is H.264.
A H.264.mov file should be supported by Premiere Elements 11. On what computer operating system is your Premiere Elements 11 running?
Do you have the latest version of QuickTime installed on your computer? And, are you running QuickTime and Premiere Elements 11 from a
User Account with administrative privileges? Please go to Premiere Elements 11 Publish+Share/Computer/QuickTime to confirm that you find
presets there for the QuickTime choice there.
What are the properties of these H.264.mov files - is it 1080p30 (1920 x 1080p30) or something else? Do you know if this camera is recording with a variable or
a constant frame rate?
Please review and consider and then we will decide what next.
Thank you.
ATR -
please help problem with importing a file error output "there was an error decompressing audio or video"
this is related to what adobe program/version?
Maybe you are looking for
-
Here's my console log. Let me know if you need any more info. Thanks! 10/7/13 6:52:30 PM com.parallels.vm.prl_naptd[133] QKqueueFileSystemWatcherEngine::addPaths: open: No such file or directory 10/7/13 6:52:30 PM com.para
-
Find my Mac not working in MB Air
I am trying to activate Find My Mac and iClud preferences says I must update Recovery System. If I check Software Update there is nothing there and download manually and install seems to work (download is 456 MB and install 73 kb??) but error remains
-
Hi, I am the student of Oracle Developer forms 6i. I am using Windows XP O/S and 10 G database with forms 6i. With regard to SQL Tracing I would like to ask the following please suggest me : 1. I want to enable SQL Tracing through forms 6i, in this r
-
Will MM-SUS scenario work perfectly if we replicate SUS vendors from SRM
Dear Gurus' We are going to use MM-SUS scenario in our classic implementation of SAP SRM. However, we are not replicating the SUS vendors directly from MM system using BD14. Instead, we are replicating the SUS vendors from SRM system by ticking the '
-
How to run the form without logon?
sir: I want to create the application without logon,but before the form appear,I must logon, I want to know how to run the form without logon(comment:I don't connect to database!); null