Problems with import/export vcards.

Hi everybody.
I'm facing a strange problem.
Some of my contacts (approx 200) vanished surprisingly (I use iCloud).
I tried to restore them with Time Machine.
But Address Book is simply not doing it!
Going back in time with Address Book and restore is not working!!
Then I noticed that also import and export of vcards is not possible.
It works a few time when I close and reopen Adress Book.
Does this sound familiar to someone? Even better someone with a solution.
By the way, where does OSX 10.7 store the address data? In the libriary? Cant find them.
Thanks a lot

I found a solution to my problem, or let's say a work-around.
Here the details, if someone is facing a similiar problem.
The file where all data is stored is named: "AddressBook-v22.abcddb" (at least since OSX 10.7)
It takes it's data from "Metadata" and "Images" (if ever you have pics with your contacts), locate in the same file AddressBook.
- So I closed the application AddressBook.
- I opened "AddressBook-v22.abcddb" with TextEdit and copied the first line), something like "SQLite format 3 @ Çbo H Ç-‚ ÏK ˚ ˆ Ò ÏMUIAL0J 9 9 9 9 9 : : 9 9 @ @ A A 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9"
- Deleted all files, means "AddressBook-v22.abcddb", "Metadata" and "Images".
- Then I went back with Time Machine and grabbed good/right/non-corrupted files (The same three files).
- Then I copied them in my current system (Application Support/AddressBook/here).
- Copied the original first line into "AddressBook-v22.abcddb" (Yes, the "SQLite format 3 @ Çbo H Ç-‚ ÏK ˚ ˆ Ò ÏMUIAL0J 9 9 9 9 9 : : 9 9 @ @ A A 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9 9"-thing).
Then I restarted the application AddressBook and - voilá - all at it's place like it should be.
iCloud data is stored in a subfile named "Sources" (located in also in Application Support/AddressBook/here). In there you find the same file tree, like on level above. And you can handle it just the same.
Happy eastern to everyone!

Similar Messages

Problems with Importing / Exporting Keywords and Meta Datas

Hi to all!
I recently upgraded to Aperture 3 and upgraded my referenced library.
Today I opened the Keyword HUD and noticed some keywords splattered in my list, which seem to be any older ones, since the new numbering indicated that they are not applied to any pictures.
So I deleted them.
Than I noticed the <Imported Keywords> folder, opened it, and it contained also a large number of previous keywords. Also they seemed not to be in use, so I also removed them.
Than I locked the Keyword HUD.
Now my question: If I export a version, with the option for 'include metadata' ticked, and edit the version than in Photoshop, and after it, import it back into the Aperture library I do have the problem.
I have tried 'Import Meta Datas' and and click 'Append'. Than it is recognizing the former keywords, which I would appreciate, but not as 'Imported Keywords'.
If I would open the file w/ the External Editor and return it back, I guess I would not have this problem. Usually I do open the referenced RAW file, and import than the edited version back into Aperture. Keywords are stored in the Library, so I would not avail the former given keywords than, is that right?
By the way are the keywords part of Meta Datas or not?
Are there any workarounds?
And had other people also problems with their keyword list after upgrading?
Thank for any ideas / infos!
Michael

Added header to CSV and to Code
$ImportFile = Import-Csv "C:\Users\username\Desktop\Scripts\Powershell\Epic\SCCM CI\Tags.csv" -Header Computer
foreach ($Computer in $ImportFile){
$path = "\\$Computer\c$\Epic\bin\7.9.2\Epic Print Service"
$xml = select-xml -path "$path\EpicPullService.config.xml" -xpath //EpicPullService//Cleanup | Select -ExpandProperty Node
if ($xml.ArchiveHours -eq '12' -and $xml.DeleteHours -eq '120') {
$Compliance = $True
}Else{
$Compliance = $False
} "$Computer","$Compliance" | Export-Csv "C:\Users\username\Desktop\Scripts\Powershell\Epic\SCCM CI\Results.csv"
Results:
select-xml : Cannot find path '\\@{Computer=SW1412-16985}\c$\Epic\bin\7.9.2\Epic Print Service\EpicPullService.config.xml' because it does not exist.
At C:\Users\username\Desktop\Scripts\Powershell\Epic\SCCM CI\Check_PullServiceXML.ps1:4 char:8
+ $xml = select-xml -path "$path\EpicPullService.config.xml" -xpath //EpicPullServ ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : ObjectNotFound: (\\@{Computer=SW...vice.config.xml:String) [Select-Xml], ItemNotFoundException
+ FullyQualifiedErrorId : PathNotFound,Microsoft.PowerShell.Commands.SelectXmlCommand
If it is not a CSV file then just get it with Get-Content
Get-Content C:\Users\UserName\Desktop\Scripts\Powershell\Epic\SCCM CI\Tags.csv |
    ForEach-Object{
        $computer=$_
        $path ="\\$computer\c$\Epic\bin\7.9.2\Epic Print Service\\EpicPullService.config.xml"
¯\_(ツ)_/¯

Problem with import-export

My problem is when I made a flash CS3 export, while i import
it in flash the problem appear: that there are few objects do not
convert type of "508 compliance" and i don't see the button on
flash.
help me...

Why you need not export/import everything from topology? I guess you need to export and then import only the dataservers right? This is what I did.
1. Exported only DS (Data server) to a file.
2. Imported it using the following cmd from dos prompt.
startcmd.bat OdiImportObject -FILE_NAME="D:\CONN_ABC.xml" -WORK_REP_NAME=WORKREPB -IMPORT_MODE=SYNONYM_INSERT_UPDATE
3. It imported successfully this Data Server. But the problem i faced id it's not associating logical schema with the Context.

Problems with import slides powerpoint

Hello,
I have a problem with import slides from the powerpoint, when
I try to import, the computer blow.
What I can do?

there have been lots of issues regarding this, however, I
have found that if I export my ppt as individual jpeg slides I can
then use the "insert > Slide > Image Slide" command to bring
in my ppt slides, I have tried everything else as well but what was
happening to me was Captivate 3 was losing all of my text and text
animation. Now my animation is not critical, however, the text is
very important of course. So now I have stagnat slides, a bit
boring but at least I was able to finish my project.
Hope this helps.
Tony :)

Problems with importing text messages from PC Suit...

Problems with importing text messages from PC Suit 7.1.18.0 to my Nokia 5800
I am trying to import a csv file that contains text messages (Note that this file was created using PC Suit 7.1.18.0) to a subfolder that I have created to My Folders but PC Suits only imports the text messages to the Draft folder. Note that initially it shows that the messages are import in the correct folder but after a refresh it shows them in the Draft Folder. Is their any setting that I should change in the PC Suit or the phone? My computer runs on Windows XP Service Pack 3 and the Nokia 5800 was upgraded to the latest firmware v20.0.012
Thanks for your help

Most phones only allows importing of draft and archived box for SMS.
To do a restoring, you need to backup the SMS as a .nbu file using PC Suite and restore later.
If you got an SD card, you can also do a backup on the SD Card (backup.arc) then restore later (reset and restore: backup.arc and mmc).
What's the law of the jungle?

Many problems with the 'Export to Text' (.txt) in CR Xi

Hi,
I have listed many problems with the 'Export to Text' (.txt) function of CR Xi.
These problems are related to this export format only (meaning everything works fine in the Viewer or in the 'Export to PDF')...
- Multi-columns layout do not export as Multi-column (export only a one column);
- Numeric values with parenthesis for negative values or with a fix currency sign at the leftmost position are not exported correctly;
- Fields having a Suppress formula which is "WhilePrintingRecords" do not appears when exported;
- Fields with 'Suppress double value' checked are not always suppressed when exported to Text.
- 'Keep Group Together' flag is not working.
- 'Reset Page Number After' simply does not works when exported to text;
- 'Keep object together' on TextBox/Section is not working.
- Whenever a group is ending on the last line of a page, the the following page as the same Group header as the previous group with no records until the page is filled, then the PageBreak and PageHeader is missing but the records of the following group appears.
I would like to know what is the status of the 'Export to Text' function (is it a deprecated function not supported anymore???).
If still supported, when will these bugs be fixed???
Thanks

Hi Rene
Export to Text is supported till date. Crystal Reports 2008 also supports this with Keep together working however when I tried with format with multiple columns, it didnot show up in the exported text file.
Regards
Sourashree

Tempo problems with imported wav files

Hey everyone, sorry if there's a quick fix for this in the forums that I couldn't find, but I've been having some tempo problems with imported .wav files.
Long story short, my system couldn't handle playing all the tracks for a song while recording drums, so I bounced out an mp3 of the song and put it in a new Logic file so my drummer could just play along to that as I recorded him. Unfortunately, the original song is at 167 bpm, but I forgot to change the bpm in the new Logic file with the .mp3 file of the song to 167 bpm, so it was left at the default 120 bpm.
So, the drums were recorded at the correct 167 bpm, but Logic thinks that those new drum .wav files should be played at 120 bpm, so when I import my drum tracks back into the original file, they do not play correctly at all.
I could get record it all again, but I wanted to check if there was a way I could salvage what I already have, since my drummer lives about an hour away right now and can't just come over whenever he wants.
Thanks for the help! I really appreciate it.

Hi,
First, do not use MP3 in Logic, the sound quality is less than AIFF, WAV or CAF, and Logic has to decode it for playback, making it a heavier burden on the CPU than an uncoded audiofile, such as AIFF, WAV or CAF.
Secondly, audio files are independent of Logic's tempo. If you bounce down an audio file in any format (other than Apple Loop), it will play back at the same speed, +regardless of Logics' tempo setting+, either at recording or playback. Logic doesn't 'think' anything. The BPM is only important to MIDI tracks, or to the spacing between audio files. The audio files themselves *are not affected* by the tempo setting. If you import an audio file of tempo 167 into a 120 BPM project, the file will still play at 167, only Logic will indicate the wrong bar positions.
regards, Erik.

Problem with import file type setting

Problem with import file type settings - In preferences>general I select "wav encoder" But then going to tools>Create it still says "create mp3 version".
Can't find a way to overcome this. Thanks for any help.

Doublechecking, roy. After making the preferences change, are you leaving the General tab by clicking the OK button down the bottom-right-hand corner of the tab?

Hi, I have problem with importing MOV files from SJCAM 4000. MOV files are in supported formats for Adobe Premiere Elements 11. But if I'm importing MOV file, only audio part is imported, video part is not imported. How can I solve this problem?

Hi, I have problem with importing MOV files from SJCAM 4000. MOV files are in supported formats for Adobe Premiere Elements 11. But if I'm importing MOV file, only audio part is imported, video part is not imported. How can I solve this problem?

haben
From looking at the specifications of your camera (SJCam 4000), we know already what video compression your camera is using. It is H.264.
A H.264.mov file should be supported by Premiere Elements 11. On what computer operating system is your Premiere Elements 11 running?
Do you have the latest version of QuickTime installed on your computer? And, are you running QuickTime and Premiere Elements 11 from a
User Account with administrative privileges? Please go to Premiere Elements 11 Publish+Share/Computer/QuickTime to confirm that you find
presets there for the QuickTime choice there.
What are the properties of these H.264.mov files - is it 1080p30 (1920 x 1080p30) or something else? Do you know if this camera is recording with a variable or
a constant frame rate?
Please review and consider and then we will decide what next.
Thank you.
ATR

Problem with importing

Hi all, I recently downloaded elements 11, and I imported some photos okay, but now it starts to import, gets about half way, and a box saying elements organizer has stopped working. When I went into problem details, it said appcrash. any ideas wot be goin on. (Im importing photos in raw) Regards. Paul.

Thanks for the reply jon. I was only importing 152 pics. off my nikon camera. I re downloaded elements 7 on to the puter, and they went straight on there with no trouble, so I would of thought they would go straight on to elmnts. 11. ho hum.and strange.
Date: Fri, 18 Jan 2013 04:58:39 -0700
From: [email protected]
To: [email protected]
Subject: Problem with importing
    Re: Problem with importing
    created by 99jon in Photoshop Elements - View the full discussion
Hi Paul What are your system specs. Raw files are usually quite large so the process could be draining your memory (RAM). Are you importing from camera or from your hard drive. In the case of the latter try importing one folder at a time or in smaller batches. You can select files and drag and drop into the organizer. You must drop on the dark gray area between the left and right side panels (if both panel are visible).
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5003831#5003831
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5003831#5003831
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5003831#5003831. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Photoshop Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Problems with import from textfile

Hi
We are experiencing problems with importing tables from a text-file. We are using Designer 6i (NT) release 2.
Some of the column sequences are lost others are changed.
Foreign keys are lost if the referenced table is after in alphbetical order! Not null columns are nullified and the column of the primary key definition is lost.
Has anyone had similar problems and/or know of a workaround?

Hi
We are experiencing problems with importing tables from a text-file. We are using Designer 6i (NT) release 2.
Some of the column sequences are lost others are changed.
Foreign keys are lost if the referenced table is after in alphbetical order! Not null columns are nullified and the column of the primary key definition is lost.
Has anyone had similar problems and/or know of a workaround?

A problem with importing layered PSD file into Flash

Hi.
There's a problem with importing layered PSD file into Flash.
If I import a layered PSD file, some part the color of the lower layer is shown at the edge of objects or shadows. Instead, if I crop each layers first and import them, there's no problem.
If the higher layer has brush or transparent effects, it becomes worse.
Any help with this problem?
Thanks.

How was the original art created? Was the original RGB or CMYK? What is the resolution of the Photoshop file? Flash only works well with RGB and 72 pixel per inch resolution. If your original art is not set this way, then Flash will attempt to convert it as it imports it. Flash uses the sRGB color space. You'll get the best color translation if your Photoshop file is using this color preference.

Premiere Pro CS5: please help problem with importing a file error output "there was an error decompressing audio or video"

please help problem with importing a file error output "there was an error decompressing audio or video"

this is related to what adobe program/version?

Hi Guys, I have a problem with Importing Pictures onto my Mac mini with Lion installed by using a Card Reader, What is the problem here so I can get Pictures onto my Computer. ,

Hi Guys,
I have a problem with Importing Pictures onto my Mac mini with Lion installed by using a Card Reader,
What is the problem here so I can get Pictures onto my Computer. ,

Hi Noob Søren
There are a few things that are confusing in your question.
As far as I know, you dont have to install Time Machine on this OS as it is already installed for you. You only need to connect a hard drive to your computer via firewire or usb, click on the Time Machine icon, Open Time Machine Preference in the drop down menu and select a disk: your connected hard drive.
You can of course reformat this connected device, partition it into a few volumes to organise data if you so wish.
I find it strange that your mac's hard drive is divided into two volumes... perhaps this was created through bootcamp?
You can access the configuration of your hd through Applications/Utilities/Disk Utilities.
Clicking on one of the icons on the right hand panel will bring the details of the contents of your hardDrive and volumes. From there you can decide to erase a partition, reformat etc....
If your hd contains more than one volume, and one of them is empty, you could decide to remove it. Back up all your important data before doing so.
Hope this helps
WN

Problems with importing in FCPX

I am having problems with importing my recent holiday video intoFCPX I have copied all the files from my Panasonic camera into my separate hard drive and they all appear there correctly.
When I connect the camera to the computer it automatically opens in iPhoto which is a nuisance as I have to stop it from doing so.
Now comes the problem when I ask to import media into a new project FPCX simply freezes and stops responding.
If I ask FPCX to import direct from the camera it says it can't re-import because all the material is already in the second hard drive where I store my projects.
So in a nutshell the programme simply does not respond to importing.
Any help please or is this a technical problem I have with my Mac.
Thanks
A new iMac version 10.9.2
OS Mavericks
FPC up dates are all installed

First, what specific camera are you using?
Next, create a folder on your hard drive, give it a name you'll recognize, then copy the entire contents of your camera card into it, keeping the full file/folder heirchy in tact. Disconnect the camera. Then import from that folder.
What do you mean specifically when you say "the programme simply does not respond to importing"? That is sort of a vauge statement.
Finally, go into the Preferences of iPhoto, you can set it to NOT open when you plug your camera in, and never have that happen any longer.

Problems with import/export vcards.

Similar Messages

Maybe you are looking for