Problems with importing Captive 3 into Flash CS3
Please help!! I was excited to get Captivate 3 and think it
will export into Flash CS 3 as a movie clip. But, got error "cannot
find Slide_1_0.swf". No background of screen shots either. What did
I do wrong?
I have a project due next week that I need to import some
captivate movies into my current flash file. I was hoping this
Captivate 3 can help, but now it's not working for me. Can someone
please point me to the right direction? Thanks a lot! Appreciate
your time and kind help.
Welcome to our community, value11
I'm nowhere near knowing anything about Flash, but perhaps
the link below will help you sort things.
Click
here
Cheers... Rick
Similar Messages
-
Colour changes when importing Illustrator graphics into Flash CS3
Hi there!
I'm creating a Flash site, and all the graphics are imported
from Illustrator.
Also, in the Illustrator file, there are some Phtoshop
graphics with shadow effects on it.
The problem is, that when I import the .ai into Flash, a
pretty strong colour change occurs: everything becomes lighter. And
the shadow, wich is black in Photoshop, turns white in Flash!
Is there a way to solve this problem? I searched the net, and
some people say it's an OSX thing, wich is pretty strange, because
Mac is an obvious choice for loads of designers.
I've attached an image preview.
Preview
Thanks in advance!
AlexThanks for the anwsers!
However, the weird thing is, when I pick one of the photoshop
graphics, asign the profile to it, and import it into Flash, the
colors look fairly good. BUT when I import the complete Illustrator
file with alle the graphics in it, I still get the color shift. I
can now put all the graphics in the flash file, one at a time, but
I think thats not the most easy way to do it.. -
Importing H.264 into Flash CS3
I have an H.264 video that I saved out from FCP via Compressor using the H.264 Format for QT 7.0. The Video looks great when viewed in Quicktime. It was my understanding the H.264 is now supported by the Flash Player natively; however, when I try to IMPORT my H-264.mov into Flash CS3 it looks like it only offers me two choices of RE-Encoding to wither VP6 or Spark - this results in an inferior result after it re-compresses the video.
Why can I not just reference the H.264 movie to play without re-encoding?This is what I did. I saved my movie to the MP4 format in my video editing program and then I used this program to encode it with the H.264 codec. http://www.h264encoder.com Then I used this program to move the metadata from the back of the file to the front so that it would start to play before it completely downloaded. http://howbits.com/stream-mp4-website-h264-high which leads to this link http://rndware.info/download/metadatamover09
I hope this helps you. -
Other problems with loading Captivate files into Flash AS3 project
I have a Captivate file done with Captivate 3, published to
Flash player 9 that is being loaded into Flash AS3. The captivate
is a simple recording of some mouse clicks in a browser. I am
displaying the playbar along the bottom, and its buttons all work
fine except for the progress bar, where you can drag the knob and
scrub back & forth in your presentation.
This progress bar is not working as it should. I see the
mouse cursor change to a hand, but when I click I cannot drag the
knob to control the progress bar. The other buttons in the playbar
do work (replay, pause, play, back, forward).
This is a unique problem in that it is only happening when
viewed in IE (7) when loaded into my Flash AS3 project. When viewed
in Firefox in my project, or as a standalone SWF, or as a SWF
simply embedded onto a plain HTML page, it works just fine.
Does anybody have any insight?
Another thing I notice with loading Captivate files with AS3
is the the amount of output messages it displays. Rather annoying
(unless this is a "feature" I've yet to be aware of - heh)Hi,
I know exactly how you feel, there is simple answer; replace
Captivate for Camtasia Studio 5 at techsmith.com. The weight on
those shoulders will be gone! You'll smile more, be more
socialable. One Happy Person.
I am very happy person ;)
Kind Regards,
Boxing Boom -
Problem with importing scanned photos into iPhoto
I have an Epson scanner that scans photos into the JPEG format. However, when I try to import these photos into iPhoto I am told that the file format is incompatible with iPhoto. This is odd since photos in iPhoto ARE in JPEG format.
Can anybody help?
Many thanks in advance for any assistance.
Sir LeicesterDid you scan these photos as grayscale b/w photos? If so that's the reason. iPhoto does not support the grayscale mode when it has the *+Dot Gain 20%+* profile added to it and that's what scanners use.
Rescan all b/w images as color and they will be accepted by iPhoto. Or you can download the Automator workflow application, Convert to JPG and Embed sRGB profile, from Toad's Cellar and drop the files onto the application. This will batch convert them to jpegs in the RGB mode with the sRGB IEC61966-2.1 color profile.
OT -
Problems with importing mp4 files into iTunes.
Hi all,
Since a few days I am the proud owner of an iPad 2. When I was looking for a solution to sync my video files (no problems with my pictures nor with my music files), I saw that I had to convert them from .avi to .mp4.
Through this community I learned that there were several free and paid options. Such as handbrake, convertavitomp4.com, etc etc
In the end I have tried around 4, but when trying to get the files into my library of iTunes it fails. In the beginning I did not receive any error message. It just did not work. I tried through CTRL-O, drag and drop. Nothing seems to be working.
Does it have something to do with the fact that I have the newest iTunes (10.5) and the latest OS for the iPad?
Does anyone have The same experience or knows a solution?
Thank you in advance,Hi Swen,
I am checking out flex player after your recommendation. However, I have since resolved my problem. I am running windows 7, 64 bit, and discovered that the problem was windows 7 security settings. All my itunes data was on a hard drive that I plugged into my new pc running windows 7. Despite allowing me to access the hard drive in the usual way, I discovered (after some help from someone more knowledgeable) that the problem was that all my itunes data was protected and I did not have "full control" rights in the security settings. Very odd, given that I have only one user account on the pc. And why it could not tell me what the problem was I don't know. But what I did was right click the drive and make sure my user account had "full control" rights and now I can drag and drop movies into itunes. This may not fix your issue but hope you resolve it soon. -
Problem with importing premiere project into after effects
Hi. When I import premiere project into after effects CS4 the files I speed up 2x (for example) look likes on the snapshot below, and they are not in the correct places.
what can I do?Then don't speed them up... This is "as designed". AE and Premiere are not compatible in their tiem-remapping/ time-stretching, so tehre is no way to move between them without losing that info.
Mylenium -
Problem with importing a video into Lr.
Should I be able to import a home video from a DVD+RW disc into Lr?
Thanks! Now the frustrating thing is that the client doesn't want to use what I created after all...bah humbug
It's not the RAM (which is either 8GB or 16....not sure on that computer). Got an e-mail from Boris Support that implied that this will happen all the time...that you have to export all projects before you use them in FCP or DVDSP or the Continuum filters won't work (loved how the support person suggested that I just use the filter in FCP...which defeats the purpose of creating something in Motion! But I digress...) Told me I had to buy a $500 program called Automatic Duck to get things to import properly...and that Boris filters won't work with the latest upgrade of FCP, btw. -
Problem with importing software components into Integration Builder:Design
Hai everyone
I m trying to import software component versions,through SLD in PI 7.0
It says unable to read software component versions from SLD "nw2004sxi:50100"
where nw2004sxi is my computername and 50100 is my j2ee http port.
Your help would be highly appreciated.
RegardsHai there
I have been finding difficult to find the solution to my problem.I would really appreciate if someone can see my error log clearly.
Error during communication with System Landscape Directory: HTTP response code: 403 (Forbidden)
Stack trace for the above error message is:
com.sap.aii.rwb.exceptions.BuildLandscapeException: Error during communication with System Landscape Directory: HTTP response code: 403 (Forbidden)
at com.sap.aii.rwb.agent.server.SLDAgentBean.convertException(SLDAgentBean.java:1472)
at com.sap.aii.rwb.agent.server.SLDAgentBean.buildSLD(SLDAgentBean.java:773)
at com.sap.aii.rwb.agent.server.SLDAgentBean.provideSld(SLDAgentBean.java:269)
at com.sap.aii.rwb.agent.server.SLDAgentBean.getXIDomain(SLDAgentBean.java:711)
at com.sap.aii.rwb.agent.api.SLDAgentObjectImpl0.getXIDomain(SLDAgentObjectImpl0.java:375)
at com.sap.aii.rwb.agent.api.SLDAgent_Stub.getXIDomain(SLDAgent_Stub.java:436)
at com.sap.aii.rwb.agent.client.EJBAgent.getXIDomain(EJBAgent.java:255)
at com.sap.aii.rwb.util.web.model.AppMainModel.getSelectedDomain(AppMainModel.java:137)
at com.sap.aii.rwb.util.web.model.DomainRep.build(DomainRep.java:100)
at com.sap.aii.mdt.util.MmMainModel.getMsgCompList(MmMainModel.java:262)
at com.sap.aii.mdt.util.MmMainModel.getListModel(MmMainModel.java:244)
at com.sap.aii.mdt.util.SelectModel.getListModel(SelectModel.java:135)
at jsp_monitor_new1288070144218._jspService(jsp_monitor_new1288070144218.java:188)
at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:541)
at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:186)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:312)
at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:368)
at com.sapportals.htmlb.page.PageProcessorServlet.handleRequest(PageProcessorServlet.java:68)
at com.sapportals.htmlb.page.PageProcessorServlet.doGet(PageProcessorServlet.java:29)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:312)
at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:418)
at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:349)
at com.sap.aii.rwb.web.messagemonitoring.viewcontroller.MmDynPage.doProcessBeforeOutput(MmDynPage.java:69)
at com.sapportals.htmlb.page.PageProcessor.handleRequest(PageProcessor.java:123)
at com.sapportals.htmlb.page.PageProcessorServlet.handleRequest(PageProcessorServlet.java:62)
at com.sapportals.htmlb.page.PageProcessorServlet.doGet(PageProcessorServlet.java:29)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:312)
at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:368)
at jsp_FC_Secure1288070041500._jspService(jsp_FC_Secure1288070041500.java:26)
at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:541)
at com.sap.engine.services.servlets_jsp.server.servlet.JSPServlet.service(JSPServlet.java:186)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
5 Message(s) : SLD agent unable to specify domain - Error class com.sap.aii.rwb.exceptions.BuildLandscapeException: Error during communication with System Landscape Directory: HTTP response code: 403 (Forbidden) - Attempt to create JCo connection object failed for domain domain.01.nw2004sxi - Integration Server unable to specify a JCo client - No component names available from Integration Server -
Hope i can get the solution for my problem.I m sure u wil get rewarded with points
Regards -
Problems with importing video tape into iMovie '08
I'm using a canopus advc 110 to import video tapes from a vhs recorder into iMovie. BUT, the process often stops after only a few minutes when I still have a long way to go. I'd like to be able to leave it to work for 20-minute chunks (longer if possible, but I think that's about the limit), but it keeps stopping after a few minutes. When I come back in the room, it keeps trying to import (time in upper right corner keeps going) but had quit earlier according to time on the lower center of the iMovie screen. This is adding to my frustration and time, which is limited. Any suggestions??
The canopus advc 110 will work IF you have a perfect tape.
Look at the Grassvalley ADVC300 it has the ability to compensate for bad tapes. Using Line Time Base Correction (LTBC), ADVC300 instantly cleans, stabilizes and preserves old VHS and Hi8 videos in clean DV format. No need to monitor, just start and forget. Fast forward the tape all the way and then rewind all the way before import will never hurt.
The program that comes with the ADVC300 has some nice filters that can improve video and audio of the source material. The ADVC300 will take Audio and Video from any source and convert it to FireWire (iMovie will treat it like a camera).
http://www.grassvalley.com/products/advc300
The ADVC300 is for anyone who wants to do editing and is concerned about quality of color and speed, for the novice it is an incredible gizmo that will restore VHS tapes to a state close to the original fixing midtones, highlights and shadows on the fly. Not only can you simply convert analog to digital you can actually manipulate the signal going in (if you want to).
A bit pricey bit it WORKS.
I would use iMovie 06 with iDVD 08/09.
iMovie 08 and 09 uses 'single field processing' meaning every other horizontal line of the video is thrown out, which reduces the sharpness of the footage. iMovie 06 uses ALL of the image to form the video.
Your workflow is editing DV clips and making DVDs, so iMovie 06 is better suited. Your movie will arrive at iDVD in DV format, which is an ideal match for making a DVD: same resolution, same pixels aspect ratio, and original quality. If you share your movie from iMovie 09, it gets re-rendered at 640x480 or less, and then iDVD upscales it back to 720x480. The end result is obviously not as good.
iMovie 06 and iDVD 08/09 is a "lossless" combination.
iMovie 09 is a wonderful programs assuming that you're using it for what it was designed to do, assemble videos to share on the Internet. -
Problem with importing images into time lapse
Hi
I am having problems with importing still images into a time lapse sequence in photoshop and would appreciate any suggestions!
I want to create a time lapse using a sequence of still photographs. All file names are sequentially name/numbered.
I am using the Motion workspace, and have followed all of the instructions available.
Create correct sized new document (film & video).
Create video timeline.
Set frame rate.
Choose 'create new video layer from file'.
Point to first image in the folder where the images are stored.
At this point, no matter what I have tried, I receive this error:
I have tried different sized new documents; tried jpegs and tiffs; tried different frame rates, tried different qualities and sizes of images; tried selecting the last image instead of the first (one recommendation).
If I use the 'Place' command from the file menu (and check the 'image sequence' box) instead of selecting 'Create new video layer' from the layers panel, it loads fine and I can still render the video.
It took me most of a day to discover this workaround, but every other reasonable 'how-to' that I can find says that I should be able to do it by opening files into a new video layer and it seems as though the new video layer option may give me more alternatives.
Anyone have any idea why I could be having these problems?
I have reset Photoshop, deleted the settings file, even reinstalled it. I use 64-bit on windows 7 and even installed the 32-bit to try that, but all with the same result.
StuartUnfortunately, yes--I've tried it that way over and over, and every other way I could think of. The files are all in one folder, and I've converted the raw files to both tiffs and jpegs. I even tried converting them to jpegs at the final pixel dimensions. Each folder that I have used only contains one type of file, and they are all part of the same sequence and sequentially numbered. I have even tried renumbering the files with numbers first, numbers last, numbers only, moving underscores. I moved the files from my external hard-drive to the desktop ... I have a lot less hair than I had only a few days ago!
I've looked at a few other tutorials that outline the same sequence of steps, and tried them over and over, and then changing one step at a time to make sure that it was not a single step that caused the problem.
The thing that is really bugging me is that it works fine if I use the different approach of using the place command instead.
Anyway, thanks for all of your time. It's going to be a lot simpler to just stick with 'place' command and I will likely do that, but I tend take things like this as a challenge. I like to know WHY it won't work for me. Sometimes it seems that there is just no logical explanation!
Stuart -
A problem with importing layered PSD file into Flash
Hi.
There's a problem with importing layered PSD file into Flash.
If I import a layered PSD file, some part the color of the lower layer is shown at the edge of objects or shadows. Instead, if I crop each layers first and import them, there's no problem.
If the higher layer has brush or transparent effects, it becomes worse.
Any help with this problem?
Thanks.How was the original art created? Was the original RGB or CMYK? What is the resolution of the Photoshop file? Flash only works well with RGB and 72 pixel per inch resolution. If your original art is not set this way, then Flash will attempt to convert it as it imports it. Flash uses the sRGB color space. You'll get the best color translation if your Photoshop file is using this color preference.
-
Importing PDF into flash CS3 - Importer du PDF dans CS3
Hello.
Originally, i posted my question in french. So i will try to
convert in english, but my english is poor.
You can see the original in french, in back of this topic, in
bolded text
So, my problem : i can import some PDF files with Flash MX
2004, but i cannot do the same with Flash CS3.
When i import (import in the scene - Command+R) the PDF file
in Flash MX 2004, i got the vectorial logo correctly and the text
as a text.
But when i import (import in the scene - Command+R) the same
PDF file into Flash CS3, there is a problem. At start, i cannot
click the PDF file, i have to choose "all the files" to can click
it. Then i click it and there is a pop window appearing, talking
about "importing video". But my PDF is not Video… And at the
end, the result is a poor jpg image of my PDF, not the vectorials
that i would like.
So why the old Flash MX can do it easily, and the recent CS3
can not ?
What i have to do ?
Bonjour,
Jusqu'à peu, j'utilisais Flash MX 2004 et quand je
faisais une importation dans la scène, je pouvais importer des
fichiers PDF, et j'obtenais en quelques dixiemes de secondes,
l'importation du contenu (en général quelques logos en
vectoriel et du texte). Léger, simple, rapide, efficace !
Et puis j'ai installé la version CS3 Professionnal, et
là c'est la débacle.
Quand je fais importation dans la scène, et
sélectionne une PDF (déjà il m'a fallu aller sur
"tous les fichiers" pour le dégriser) il me sort une usine
à gaz dont voici quelques détails.
- Il commence par m'ouvrir une fenêtre "importer de la
vidéo" me demandant de sélectionner si ladite vidéo
est sur mon DD ou déjà "déployée" sur le web.
(Mon fichier PDF n'a rien de vidéo, c'est une image fixe, nom
de xxx).
-Si je continue, il me demande "comment je veux la
déployer ?". 5je ne veux rien déployer, je veux juste
importer 2 ou 3 vecteurs et du texte !)
- je lui dis de "l'incorporer dans le swf". Il me demande
comment je veux incorporer la vidéo. (C'EST PAS DE LA
VIDÉO, t'es sourd sale bête !!!)
- je lui explique que le "type de symbole" est graphique
(j'ai le même résultat si je mets clip) et il me demande
le codage.
- si je décoche "coder la vidéo" il refuse de
continuer, et si je le coche, il m'importe une espèce de jpeg
atroce, pixelisé à mort et inexploitable (tout du moins
pour l'usage que je compte faire).
Donc ma question est "est-ce que j'ai raté un
épisode ?" (oui, plusieurs, certes, mais de là à
changer complètement l'histoire, faut pas abuser) et la
suivante c'est surtout "comment faire pour importer convenablement
mes fichiers PDF qui ne comporte que quelques logos en vectoriel et
du texte, et le tout fixe fixe fixe, rien à voir avec de la
vidéo ?"
En attendant, je ré-installe Flash MX pour avancer un
peu, mais je ne peux pas croire qu'une fonction primordiale soit
supprimée, comme ça, sans remplacement.
Os court !Is that really the end, doc ?
-
Captivate 3 is wrong size when importing into Flash CS3
I've tried exporting, publishing etc. and no matter how I
try, when I import into Flash CS3 the size of the Captivate content
(background screens, in particular) are too small. For example, I
captured a 423x424 area for my Captivate project. When I import
into a Flash CS3 project with the same dimensions the Captivate
content (screens) are more like 203x203.5 and the mouse path and
slide context starting positions are upper left corner. I've tried
adjusting some of the importing settings but can't get the screens
the right size unless I resize each one manually - and I have
around 100. Any help greatly appreciated!
-ScottI am using captivate 3 and I get an error whenever I try to
export to flash cs3. unknown error.
why the hell doesnt Adobe say that flash is required to
export to flash BEFORE I buy the software? I am using my pc for
captivate, but am primarily mac based and was going to edit in
flash on my mac. but captivate didnt allow for me to export to
flash at all without any kind of flash installed. I installed a
demo version of flash, but the export is coming up with an error.
any ideas out there? adobe??? I'm currently using vista OS.
thanks in advance. r -
Problems with importing images into Lightroom cc
Problems with importing images into Lightroom cc
I have installed lightroom cc and having trouble imortera images from my Canon 1DX.
Lightroom starting the capture, but then nothing happens more, if I turn off the camera, I get error message photo 100-200 could not be loaded.
Now I have left lightroom 5 and where the input port works fine.
What happened to the upgrade from Lightroom 5 to lightroom cc?
The camera has the latest software.I've now tested in various ways.
First, I have images on both memory cards in the camera.
Test1) Selects Not all of the photos in the camera at the input port bearings, it seems to work fine.
Test 2) selects all cards in the camera and then get the following, Lightroom starts inportera short but stops and nothing happens (Fig.1).
I turn the camera off after a while and get the next meddelnade (picture 1)
Which can be translated:
"The following files were not imported because they could not read (351)
Property 1-100
etc. "
Picture 1.
Picture 2
Maybe you are looking for
-
Why size of fonts changed when presentation opened on different mac?
we just completed great keynote presentation and send presentation to other Mac's at out office and on other Mac's all of txt font size changes, which make presentation like piece of ****. Of course still can go through but its not the version which
-
How come when I click an enlarge picture link on the ebay a blank page comes up?
Every time I click an enlarge picture or the upload picture link a blank page comes up. It has nothing on it but "search bookmark and history"
-
How to determine current ORACLE XE db has been used
I installed the BPA Architect, and it seems all right. during stalling process, I've choiced using XE db, but can't find any schema throug XE admin tools. how to determine which db is been used in Architect?
-
Data structure with double mapping?
I'm creating a simple class which is required to hold a hardware store's inventory. The inventory needs to hold the product name, the quantity on hand and the unit price. I realise I could created two HashMaps (or similar), with the product name as t
-
Execute "emca -config dbcontrol db -repos create" exception
Hi, I want to recreate OEM configuration, so I execute the above command. The following is the exception: Exception in thread "main" java.lang.NoClassDefFoundError: HTTPClient/ProtocolNo tSuppException at oracle.sysman.emd.targetIntg.agent.AgentTarge