Problems with importing mp4 files into iTunes.

Hi all,
Since a few days I am the proud owner of an iPad 2. When I was looking for a solution to sync my video files (no problems with my pictures nor with my music files), I saw that I had to convert them from .avi to .mp4.
Through this community I learned that there were several free and paid options. Such as handbrake, convertavitomp4.com, etc etc
In the end I have tried around 4, but when trying to get the files into my library of iTunes it fails. In the beginning I did not receive any error message. It just did not work. I tried through CTRL-O, drag and drop. Nothing seems to be working.
Does it have something to do with the fact that I have the newest iTunes (10.5) and the latest OS for the iPad?
Does anyone have The same experience or knows a solution?
Thank you in advance,

Hi Swen,
I am checking out flex player after your recommendation. However, I have since resolved my problem. I am running windows 7, 64 bit, and discovered that the problem was windows 7 security settings. All my itunes data was on a hard drive that I plugged into my new pc running windows 7. Despite allowing me to access the hard drive in the usual way, I discovered (after some help from someone more knowledgeable) that the problem was that all my itunes data was protected and I did not have "full control" rights in the security settings. Very odd, given that I have only one user account on the pc. And why it could not tell me what the problem was I don't know. But what I did was right click the drive and make sure my user account had "full control" rights and now I can drag and drop movies into itunes. This may not fix your issue but hope you resolve it soon.

Similar Messages

Problem importing MP4 files into iTunes

I'm tearing my hair out here! I've used a DVD ripper to convert a track from a DVD into an (iPod friendly) MP4 format. I then dragged & dropped the MP4 "chapter" into iTunes Library, where it appeared in Movies, but I had to click on Advanced>Convert Selection for iPod. It took iTunes about 1 hour to convert the track & then it played on iPod. (Was SO CHUFFED I'd got it to work!) Flushed with success, I tried doing several tracks at once but when I tried to get iTunes to convert again, I got a message saying the file is already in the correct format. And although file is showing in Library>Movies, it doesnt register in my iPod>Movies and of course it won't play. Please help.

Sorry, I don't know what is specifically wrong with your setup but maybe these links will help...
Frequently asked questions about viewing and syncing video with iTunes and iPod
http://docs.info.apple.com/article.html?artnum=302758
GUIDES TO: Converting Video for iPod - Mac & Window
http://forums.ilounge.com/showthread.php?s=&threadid=123067
Patrick

No audio when importing mp4 files into iTunes.

Since recently, whenever I import an MP4 of M4V file into iTunes, it either deletes the audio, or the video becomes shocky.
When I play the same files in VLC they do work. That is great and all, but since I use Apple TV I need them to work in iTunes.
I've tried to delete and re-import the files. I've also tried to download different versions of the same files, which also didn't work.
To me it seems like the problem lies within iTunes.. but I'm not really a computer wiz.
Anyone else have this problem and know how to fix this?
Thanks in advance.

Does your friend have EXACTLY the same computer software and hardware?
More information needed for someone to help... please click below and provide the requested information
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840

Can't import mp4 file into iTunes

I have had a lot of success converting my DVDs to mp4s and storing them on external hard drives to play through AppleTV (I love AppleTV!). However I have a couple of files that will not load into iTunes. I get no error message but when I try to open with Quicktime I get an error message saying the file is not a movie file. The files I am having problems with were recorded from cable tv and written to DVD. Please help...

HOCKEY PUCK! Looks like this isn't a solution anyway. Tried it on a 250 MB file with 7 chapter markers and got some very random results.
1) Clipped the previously embeded graphic from the iTunes file and applied the same workflow. This time it did not save the chapter track (just like it does in MPEG Streamclip).
2) A bit confused, I deleted the newly created file and tried again only without clipping the graphic first. This time when I attempted to open the newly created file there was not video track whatsoever.
3) Now I'm getting really confused. So I delete the new "audio" file and load the source file one more time. This time, instead of relying on the the "current default" options (i.e., the ones last used), I open the options window and find the "Pass through" has reset to "None." So I attempt to change it back to "Pass through" and guess what... Now that option is "grayed out" just as you say (and as I believe it used to be in QT v7.1.3).
4) Totally flabbergasted, I close the player and load a secondary file (paired TV episode to the first file) and open the "Movie to MPEG-4" Export option. To my surprise, the audio and video "Pass through" settings are back again. Okay, so this time I decide to "tic" the chapter track to see if that will prevent it's loss. No joy!
Basically, I spend a few more wasted hours trying to figure out why I could not duplicate my original success. I even drag out other applications like SimpleMovieX and MPEG Streamclip which have "Save As..." options to "compatible" containers. Both delete the chapter track just as QT Pro is currently doing. Suffice it to say I'm growing angrier by the moment and finally decide to quit so I can update the latest results here. Sorry everyone... Really thought the latest QT upgrade had someting going for itself here. Looks like I merely "jumped the gun" instead.

Problems with importing .MP4 file and the audio in FCP 6

Hi all,
I am pretty new to Final Cut Pro and have just approached my first project.
I have a Samsung VP-MX20
http://www.samsung.com/uk/consumer/detail/spec.do?group=cameracamcorder&type=cam corder&subtype=flashcamcorder&model_cd=VP-MX20/XEU&fullspec=F
*Codecs H.264, AAC.*
I needed some space on the camera so halfway through a holiday i transfered all the video files from the camera to my Laptop.
I have imported these files from the hardrive
Vid rate - 25 fps
compressor - H.264
Pixel Aspect - PAL - CCIR 601
What seems to be the problem is ok when i drag the clip from the viewer to the canvas and apply insert, i get the box that says 'Change Sequence settings to match the clip settings?
i click yes and when the clip is layed out on the timeline there is a red line above the timeline, when i play the clip i only get bleeps as audio and not the original sound.
If i drag the playhead i can hear the audio but if i try to play all i hear us bleeps plus if i import an mp3 the red line appears above the timeline and the same applies
can anyone help me here.
Thanks
Elles

Hi Zak,
many thanks for your reply, i have contacted Apple and taking your advice and using compressor i have converted the codec H.264 to Apple Pro Res 422 for interlaced material.
I have imported this file and when i drag once again from the viewer to canvas i get the standard box asking to change the sequence to match the clip.
I am still getting the red line above the timeline and bleeping as audio.
any idea?

Problem with transferring mp4 file to iPod Video

I used MediaFork to rip a DVD (that I own) to mp4. It looks great on my iMac and MacBook when running in QuickTime. I can import the file into iTunes.
I can play the file from within iTunes. However when I sync content to my iPod it does not show up!
When in QuickTime the following information is displayed in Movie Info.
Format: h.264 Decoder 640 x 480, Millions AAC, Stereo (L R), 44.100 khz
Data rate 1610.00 kbits/second
Every once in a while the Playing FPS changes to > 24 (like 24.10)
Is the data rate the problem??? Or what else could be the problem?
Help!
This is from the Video IPOD video specifications.
H.264 video, up to 1.5 Mbps, 640 by 480 pixels, 30 frames per sec., Baseline Low-Complexity Profile with AAC-LC audio up to 160 Kbps, 48 kHz, stereo audio in .m4v, .mp4, and .mov file formats;
H.264 video, up to 768 Kbps, 320 by 240 pixels, 30 frames per sec., Baseline Profile up to Level 1.3 with AAC-LC audio up to 160 Kbps, 48 kHz, stereo audio in .m4v, .mp4, and .mov file formats;
MPEG-4 video, up to 2.5 Mbps, 640 by 480 pixels, 30 frames per sec., Simple Profile with AAC-LC audio up to 160 Kbps, 48 kHz, stereo audio in .m4v, .mp4, and .mov file formats

The data rate you mention (1610) is over the published spec (1500), so I would guess that is indeed a problem.
Also, in MediaFork, did you set the encoder to the option marked for iPod?
If not, that could be a problem. Output from the encoder labeled MAIN won't work on an iPod.
Settings I use succesfully –
File format: MP4 file
Codecs: AVC/H.264 Video / AAC Audio
Framerate: Same as source
Encoder: x264 (h.264 iPod)
2-pass encoding: yes
Quality: Average Bitrate 1250
Picture settings: 640 x XXX

I cannot import any files into iTunes

When I try to add a file to iTunes by dragging it over the iTunes window, iTunes simply does nothing, no error message, no failure, the file simply isn´t copied into iTunes. Same applies when I try to select a file via the mediathek importer (shortcut cmd+O).
I has worked before but then I upgraded to version 7.7.1 and now it simply doesn´t anything. Does anyone have the same problem?

I'm having the same problem.
For over a week now, I have not been able to import songs into my library by dragging them on to iTunes. Whenever I do, I get the following message:
*"Attempting to copy to the disk “XXXX” failed. You do not have enough access privileges for this operation.*
*iTunes could not save to your Music Folder because you do not have write access. Check the permissions on your Music Folder and folders in your Music Folder, then try copying this file again."*
I can still buy and play songs from iTunes, or import from a CD – but if it’s a music file from somewhere else (like a digital album I bought straight from a band’s website, and NOT through iTunes), then it won’t allow me to import it to iTunes. I was able to do it a few weeks ago, but now I get the above error message. Since then I have upgraded to iTunes 8 — however the error message started happening right before that, so it can’t be that. The one major thing that has happened to my computer since then, and which I think could possibly be the culprit here, is detailed in this thread:
http://discussions.apple.com/thread.jspa?threadID=1686803&tstart=0
Basically I was having trouble accessing my account, and I had to delete it and rebuild it. I’m pretty sure the problem with importing music files happened after that.
I looked online for ways to fix this problem, but none of the suggested solutions have worked:
I made sure my Music Library folder, and ALL the folders within, had “read & write” access for my account, but that didn’t work.
I used Disk Utility to perform Repair Permissions, but that didn’t work either.
So I’m at a loss for what else I should do. Any suggestions?
(FYI — my music is all located on my external hard drive).
Message was edited by: Anton Kawasaki

Tempo problems with imported wav files

Hey everyone, sorry if there's a quick fix for this in the forums that I couldn't find, but I've been having some tempo problems with imported .wav files.
Long story short, my system couldn't handle playing all the tracks for a song while recording drums, so I bounced out an mp3 of the song and put it in a new Logic file so my drummer could just play along to that as I recorded him. Unfortunately, the original song is at 167 bpm, but I forgot to change the bpm in the new Logic file with the .mp3 file of the song to 167 bpm, so it was left at the default 120 bpm.
So, the drums were recorded at the correct 167 bpm, but Logic thinks that those new drum .wav files should be played at 120 bpm, so when I import my drum tracks back into the original file, they do not play correctly at all.
I could get record it all again, but I wanted to check if there was a way I could salvage what I already have, since my drummer lives about an hour away right now and can't just come over whenever he wants.
Thanks for the help! I really appreciate it.

Hi,
First, do not use MP3 in Logic, the sound quality is less than AIFF, WAV or CAF, and Logic has to decode it for playback, making it a heavier burden on the CPU than an uncoded audiofile, such as AIFF, WAV or CAF.
Secondly, audio files are independent of Logic's tempo. If you bounce down an audio file in any format (other than Apple Loop), it will play back at the same speed, +regardless of Logics' tempo setting+, either at recording or playback. Logic doesn't 'think' anything. The BPM is only important to MIDI tracks, or to the spacing between audio files. The audio files themselves *are not affected* by the tempo setting. If you import an audio file of tempo 167 into a 120 BPM project, the file will still play at 167, only Logic will indicate the wrong bar positions.
regards, Erik.

I can't import mp3 files into iTunes

Just recently, I find that I can't drag/drop (or import) .mp3 files into iTunes (12.1.0.50).
I did confirm that the files aren't locked.
Any ideas? Thanks!

No mp3 files from any source, including iTunes itself, or just some particular batch of mp3s files from some unspecified source? It isn't unusual for some encoders to produce mp3s that are not compliant with iTunes. You can try using the application MP3 Scan+Repair (http://triq.net/mac/mp3-validator-mac-os-x) to fix them but sometimes you have to re-encode them. Try playing with Quicktime Player instead and report if it will play the files.
Oh, it also isn't unusual that files do not have labels built in. They are adding to iTunes but not ending up where you expect them to be.

Importing mp4 files into Adobe Premiere Elements 4

Hi
I'm using Adobe Premiere Elements 4 here and am having problems when importing mp4 files. They jump and skip, Flicker Green every now and then and generally just flip out on me.
Does anyone know what's the problem here and whether there's any specific settings i need to tweak within APE to get it to work properly?
TIA

Ok thanks for the info guys
My original recommendation was to convert these but as mentioned wasn't the most popular option.
I've found some other threads on here in regards to a similar problem with Samsung cameras and APE 4. These also mention that the files need to be converted to a friendlier format before importing.
Thanks again

Hi, I have problem with importing MOV files from SJCAM 4000. MOV files are in supported formats for Adobe Premiere Elements 11. But if I'm importing MOV file, only audio part is imported, video part is not imported. How can I solve this problem?

Hi, I have problem with importing MOV files from SJCAM 4000. MOV files are in supported formats for Adobe Premiere Elements 11. But if I'm importing MOV file, only audio part is imported, video part is not imported. How can I solve this problem?

haben
From looking at the specifications of your camera (SJCam 4000), we know already what video compression your camera is using. It is H.264.
A H.264.mov file should be supported by Premiere Elements 11. On what computer operating system is your Premiere Elements 11 running?
Do you have the latest version of QuickTime installed on your computer? And, are you running QuickTime and Premiere Elements 11 from a
User Account with administrative privileges? Please go to Premiere Elements 11 Publish+Share/Computer/QuickTime to confirm that you find
presets there for the QuickTime choice there.
What are the properties of these H.264.mov files - is it 1080p30 (1920 x 1080p30) or something else? Do you know if this camera is recording with a variable or
a constant frame rate?
Please review and consider and then we will decide what next.
Thank you.
ATR

Premiere Pro CS5: please help problem with importing a file error output "there was an error decompressing audio or video"

please help problem with importing a file error output "there was an error decompressing audio or video"

this is related to what adobe program/version?

How to import Flac files into itunes

Hi there,
the title say it all. How can I import Flac files into Itunes?
I have a lot of them. I click onto add to library select the flac file, click on open and nothing happen.
Many thanks for your help.
regards

Hello CESNET the best bet is to try http://blowintopieces.com/fluke/ I myself don't use Flac files but to any audiophile it's important to hear sound at it's best. Also WAV or AIFF & ALAC you will need to use http://tmkk.hp.infoseek.co.jp/xld/index_e.html to convert into ALAC.
P.S. their is also a simple FLAC player but can't remember it one more thing converting FLAC to WAV will not give you full TAGs. Best bet is to try just one file you've copied ether straight into iTunes or convert & see what's best for you.

Anyone having issues with importing CR2 files into lightroom 5 as error message comes up saying "Some import operations were not performed". please advise what is a solution please

Urgent please
anyone having issues with importing CR2 files into lightroom 5 as error message comes up saying "Some import operations were not performed". please advise what is a solution please

Sounds like the folder Write permissions issue described here with a solution:
"Some import operations were not performed" from camera import

How import flac files into itunes

how do you import flac files into itunes on a mac?
thx

click here for information.
however, you could also convert the FLACs to Apple Lossless files. either of these free apps can do that for you.

Problems with importing mp4 files into iTunes.

Similar Messages

Maybe you are looking for