Problems with incoming and outgoing mail

I've read a number of posts on this topic, yet none completely matches the problems I'm having.
Incoming Mail:
My incoming e-mail is a pop account hosted by Earthlink. I am able to enter my data and get mail using a non wi-fi network.
Outgoing Mail:
When I use the generic AT&T outgoing server, it works, but then I am unable to get mail, and vice-versa. (I tried sending mail through the general web hosting server that Earthlink recommended (and works on my laptop when traveling away from home network, but it just spins.)
Conflict:
I am either able to send mail or receive mail, not both at once, thank-you-very-much.
The settings and ports are unchanged. And, I can't figure out why one would affect the other considering they are two completely different settings.
We're currently trying to set up a smtp.com or Google mail account, which is okay, but I would much rather solve this without any more links in the chain.
Any suggestions? Will re-setting my iPhone completely help?

Yes, thanks, was my first stop and very handy.
Unfortunately, because my pop account is hosted/relayed at Earthlink, it did not identify the account as it would a stand-alone service. I tried using the basic Earthlink account info, but of course, my basic account does not have anything to do with my current business pop account. So after using the set-up assistant, I was back at square one.
I was able to set up smtp.com successfully and am up and running.
I just can't figure out why one setting would mess up another.

Similar Messages

  • Having problems with maverick and outgoing mail with domain name

    hi
    i just upgraded my operating system from mountain lion to maverick. i did a clean install on a new hard drive.
    anyways, my desktop mac mini computer using mountain lion is having no problems with my outgoing mail with my domain name.
    smtp.1and1.com
    custom port 993
    SSL
    password
    using the exact same info on my laptop with maverick
    no dice.
    mail comes in but can't email out with my domain name
    i tried  -  smtp.1and1.com:(email address)
    any suggestions
    thanks
    phil

    Hi, Phillip Chin. 
    Thank you for the question.  The article below will help you troubleshoot the issue that you are experiencing with mail.
    OS X Mail: Troubleshooting sending and receiving email messages
    http://support.apple.com/kb/ts3276
    Cheers,
    Jason H.

  • Problems with iCal and outgoing mail

    My Ical keeps giving me this message: The request for account “Yahoo!” failed.  The server responded with “502” to operation CalDAVAccountRefreshQueueableOperation.  How do i fix this?

    Yes, thanks, was my first stop and very handy.
    Unfortunately, because my pop account is hosted/relayed at Earthlink, it did not identify the account as it would a stand-alone service. I tried using the basic Earthlink account info, but of course, my basic account does not have anything to do with my current business pop account. So after using the set-up assistant, I was back at square one.
    I was able to set up smtp.com successfully and am up and running.
    I just can't figure out why one setting would mess up another.

  • How to save all incoming and outgoing mail

    I run a Leopard server with 10 email clients that I want to be able to save the incoming and outgoing messages from. I could have sworn that under Tiger, I had the catchall working to include both incoming and outgoing mail to [email protected]
    However, under Leopard the catchall seems to grab only the incoming emails? Is there a way to do this? or - is there a better way I SHOULD be doing this. Basically I need both a record of emails for liability issues and the ability to access them easily (this was made convenient by using webamil to login and read as needed).
    Thanks!

    In /etc/postfix/main.cf
    See also:
    http://discussions.apple.com/thread.jspa?messageID=4979965&#4979965
    http://discussions.apple.com/thread.jspa?messageID=2925242&#2925242

  • No sound for incoming and outgoing mail

    I have a Macbook Pro Retina with the latest OS.  I can't get sounds to work for incoming and outgoing mail.  Can anyone tell me how to correct this?  On my old computer I used to get a ting sound for incoming mail and a whoosh sound for outgoing mail.
    Thanks for any help you can give me.
    Kathy Nelson

    I noticed I actually was not getting all of my mail sounds either, I recently wiped my HD and reimported my account and found my mail was all messed up, so I backed up all my mail, deleted all of the accounts and then set them back up and all sounds are back.
    Try creating a second account on your device and see if the sounds work in mail there?

  • Hotmail and Yahoo Incoming and Outgoing Mail Servers

    Does anyone know what the incoming and outgoing mail servers are for hotmail and yahoo? I'm trying to put them into my mail account, and can't seem to figure out which one (pop or imap) to use.
    Thank you!
    -Kat

    If you are not using the paid (plus) accounts for Yahoo and Hotmail, they do not support access through email client applications like Mail, etc.
    For Hotmail, you may have success with the HttpMail Plugin if your account is old enough.
    For Yahoo-and Hotmail if it doesn't work with the plugin-you can use MacFreePOPs.

  • HT201320 What is incoming and outgoing mail server and server port number

    What is incoming and outgoing mail server and server port number

    See applenerd504 previous reply:
    These specifications that allow you to send and receive messages on your iPhone. If you are using iCloud Mail, Gmail, or another service listed in the selector in settings, they should be automatically configured. If not, you may need to look up certain numbers for your email service.
    Putting it in slightly different terms:
    If you are using a web-mail system like gmail (with a gmail email address) all the mail sending, receiving and management is done on Google servers. In these cases you will only need to have a working internet connection to be able to log in to the service to access its data. 
    Supplying mail sever names and port numbers should only be needed if you are using a traditional (non-web) email account where you are accessing the mail servers directly. This would be typical for a email account set up by someone like your ISP (Internet Service Provider), in these cases you will have to ask them for the appropriate settings.

  • Mavericks: all incoming and outgoing Mail no longer working

    Since Maverickx update all my incoming and outgoing mail is no longer working on any of my accounts.
    Error mentions he did not succeed in connecting with the SMTP server (or IMAP server on another account)
    I use iCloud, gmail and One.com accounts and none of them are working...

    Hello there, Sakso.
    The following Knowledge Base article provides some great steps to follow for troubleshooting your issue:
    OS X Mail: Troubleshooting sending and receiving email messages
    http://support.apple.com/kb/TS3276
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • HT4597 who is the incoming and outgoing mail server?

    I am trying to put icloud into my mail.  What is the incoming and outgoing mail server?

    Welcome to Apple Communities
    The incoming server is where you receive the mails, and the outgoing is used when you send mails. Server information

  • What is incoming and outgoing mail server on adding a new emial account???

    What is incoming and outgoing mail server on adding a new emial account???

    The servers your email provider uses to route incoming and outgoing messages to and from email accounts.  If you are trying to set up and email account on your phone you need to get the required information for these settings from your email provider.

  • How to change my password and my incoming and outgoing mail servers

    Hi I have used Outlook Express for years and I know how to configure "everything" I need within the settings pages because their settings pages are all "logical" with everything out in the open.
    However, Thunderbird "hides" their settings behind buttons and confusing screens.
    There are many tutorials that explain how to set up Thunderbird from the beginning, and show how to set up a new email account. But I have not been able to find a tutorial on how to change my email account password "after" I have been using Thunderbird for awhile.
    I also see no way to change the incoming and outgoing servers. For example, I have changed from one hosting company to another hosting company and I need to use the new mail servers from the new hosting company and I do not see any tutorials anyplace that cover ongoing or day-to-day activities with Thunderbird.
    Can you please change your settings screens to make Thunderbird easier for new people to find these normal and necessary items?
    Also can you please point me to a tutorial that shows me how to change my email account password and change my incoming and outgoing servers?
    Thanks so much!
    Edward

    If you wan to create an account, you must the delete the existing account.
    So take backup of your emails if your using POP3
    Two ways you can do it
    *Copy all the emails to Local folder
    *Back up your Mail folder from your profile
    For more
    *http://mozbackup.jasnapaka.com/
    *http://www.wikihow.com/Back-Up-Email-Files-in-Mozilla-Thunderbird
    *http://www.auralsolutions.com/2012/12/how-to-backup-thunderbird-data-emails-and-contacts/
    *http://email.about.com/od/mozillathunderbirdtips/qt/et_backup_prof.htm

  • Figuring out an incoming and outgoing mail server for entourage

    Originally, i had .mac and used my @mac.com on entourage. However, i decided not to pay for .mac and switched to a gmail.com account. Two problems, entourage doesnt recognize gmail and i cant figure out an incoming or outgoing mail server. Any help would be appreciated

    sorry...pop.gmail.com & smtp.gmail.com
    http://mail.google.com/support/bin/answer.py?answer=13287

  • Copy all incoming and outgoing mail to an additional mailbox

    Is there a means to copy all incoming and outgoing email through the Apple Mail server to one inbox? As an example, Bob sends and email to Jeff and receives a reply. I want a copy of each of those emails to, say, [email protected] Is there a means within the server config or some other method to accomplish this?

    Help with this matter would be greatly appreciated.

  • Turn off verizon greeting with incomming and outgoing calls for LG G2

    Can  anyone tell me how to turn off the Verizon greeting with all incoming and outgoing calls for LG G2

        Hi lindapet2!
    I would love to assist you with your device settings.  First, provide me some additional details as to what you're experiencing.  Are you referring to an audible alert or is this a pop-up message you see when making and receiving calls?  Please let me know so that I can further assist.  Thanks!
    AnthonyTa_VZW
    Follow us on Twitter @VZWSupport

  • TS3276 incoming and outgoing mail fine for 3 months, outgoing suddenly stopped on this macbookpro, same settings as on my macbook which is still working on incoming and outgoing!

    Any help appreciated, settings on both computers are the same and the mail on this has worked for both incoming and outgoing until last night. I have not changed any settings.

    Hi thanks for the prompt response, I tried port 25 and still get similar messages?
    INITIATING CONNECTION Jul 31 14:30:41.422  -- host:smtpmail.freenetname.co.uk -- port:25 -- socket:0x0 -- thread:0x7f91c33b9120
    CONNECTED Jul 31 14:30:41.485 [kCFStreamSocketSecurityLevelNone]  -- host:smtpmail.freenetname.co.uk -- port:25 -- socket:0x7f91c336ec80 -- thread:0x7f91c33b9120
    READ Jul 31 14:30:42.911 [kCFStreamSocketSecurityLevelNone]  -- host:smtpmail.freenetname.co.uk -- port:25 -- socket:0x7f91c336ec80 -- thread:0x7f91c33b9120
    220 avasout06 smtp smtp-proxy.plus.net
    WROTE Jul 31 14:30:42.929 [kCFStreamSocketSecurityLevelNone]  -- host:smtpmail.freenetname.co.uk -- port:25 -- socket:0x7f91c336ec80 -- thread:0x7f91c33b9120
    HELO unknown-28:cf:e9:1f:d4:1b.home
    READ Jul 31 14:30:42.970 [kCFStreamSocketSecurityLevelNone]  -- host:smtpmail.freenetname.co.uk -- port:25 -- socket:0x7f91c336ec80 -- thread:0x7f91c33b9120
    501 HELO requires valid address

Maybe you are looking for

  • How can i display the result of java class in InputText ?

    Hi all, How can i get the result of java class to InputText Or OutputText ??? also can every one in the forum give me road map for dealing with java in oracle adf because i'm beginner in oracle adf i saw some samples in oracle adf corner but it's dif

  • Getting a dump while executing the standard report BUSCHDOC

    Hi, I am getting a dump while executing the standard report BUSCHDOC. I am specifying the following values:- Application Object : BUPA Business partner:<some business partner> Changed on: <some date> Changed by:<some userid> Below are the dump detail

  • Where can I buy a box to ship my 21.5" iMac?

    I am selling my iMac and did not keep the original box and shipping material.  Is anyone aware of a retailer who sells boxes close to the size of the original box?  25 x 22 x 8.

  • Open Item ,Close Item

    Hi, Can you please tell me , What are open item ,Close Item, Line Item in general terms(so icould understand easily). Thanks, Naresh.

  • Converting bytearray into binary format

    Hi I have a byteaary , I want to convert this byteArray data into binary format (01010101) , Please help me [Bindable]             private var imgByte:ByteArray; bitmapData     = new BitmapData(pic.width, pic.height);                  bitmapData.draw