Problems with incoming iMessages after iOS 7 update

Hello,
Since updating to iOS 7 (and also installing the 7.02 update), I am having the following problems with iMessages:
1) Messages sent to my phone from another iPhone user do not hit my phone until it connects to the internet, either via wifi or through cellular data. I don't have a lot of data on my cell plan, so I keep cellular data turned 'off' unless I am actively using it. As an example, yesterday, my daughter who has an iPhone had messaged me, and rather than just recieving her messages as regular old texts, they had to sit there in cyberspace until I turned my cellular data on, and then they hit my phone as iMessages. Prior to iOS 7, they came as text messages if my phone was not web-connected and available for an iMessage. I don't like that I had no clue there were messages waiting for me until I activated cellular data so I could check my email.
2) I am not getting push notifications for iMessages. When I'm home and the phone is connected to wifi, if I wake the phone up to use it for something (hit the home button and slide it), a few seconds into using the phone, I will receive iMessages that were sent while the phone was sitting there not being used. As an example, yesterday my daughter had sent several messages to me that were delivered as iMessages since my phone was connected to wifi.... but they didn't hit my phone until I was utilizing the phone for another purpose. They had been sent a couple of hours earlier and I had no clue the messages existed because I hadn't been notified.
3) Sometimes the #2 situation is worse... I don't get the iMessages over wifi until I actually open the Messages app.
Also, when I put iOS 7 on my phone, it deleted all previous conversations that had come through as iMessages. Made me sad. I had a lot of photos that had been sent to me via iMessage that were just there in the conversation threads, and now I don't have those photos anymore.
Any thoughts about how to remedy my issues? I hate not knowing someone with another iPhone is trying to message me. When an android user sends me a message, it just comes through as a text and I know it's there... but fellow iPhone users might as well call me to tell me they have sent me a text, because otherwise... I'll never know!

I have the same problem :(
I backed up my iphone 4S - which had been ugpraded to IOS6 - and when i restored to my Iphone 5 -- my shortcut keys had stopped working!
Turning it off - and back on again makes shortcuts work - but only for so long
All my shortcuts have been copied over correctly.

Similar Messages

I am having problem with my sound, after i updated to ios 6, apple please help

i am having problem with my sound, after i updated to ios 6, i can hear music with headphone only, apple please help

Try going into your settings and 'reset all settings'
You will need to retweak your device but it's been said to help with sound issues.

TS1559 i am have a problem with wi-fi after i update my system to IOS 7.1

i am have a problem with wi-fi after i update my system to IOS 7.1

And what would that problem entail?
Did you look at the link that you tagged?

Is anybody else having a problem with Bluetooth functionality after iOS 7? I have lg tone Bluetooth headset that I use while working out, cutting the grass, etc. Before the update I could press the "next track", but anymore.... Help?! Please!!!!!!

Is anybody else having a problem with Bluetooth functionality after iOS 7? I have lg tone Bluetooth headset that I use while working out, cutting the grass, etc. Before the update I could press the "next track", but anymore.... Help?! Please!!!!!!

Tell Apple about it: http://www.apple.com/feedback/iphone.html
Be sure to give as much detail as possible.
I would also check LG's site.

Cannot activate iMessage after iOS update.

Cannot activate iMessage after iOS update. "Activation unsuccessful" I cannot activate it.

Have you updated your iOS to 5.1? Just confirming as it says "iPhone 4S, iOS 5.0.1" in your thread.
Double check if you have credit in your mobile in order to activate iMessage.
Turn iMessage off and on again, than turn off your phone (long press display off and on button) and slide to turn off. Turn your phone back on, enter your "Apple I.D" in the iMessage window and wait till it verifies everything.
Tell us if it solves the issue.

Problems with iPad 3 after IOS 5.1.1 update

Hello.
I connected my iPad to my imac this afternoon for the first time (usually it was synch with my sister's macbook pro), and the software update for ipad immediately started.
I thought it was no harm with updating.
However ever since it was updated, just within a hours, i noticed problems with it.
The screen moved on its own. Without me pressing or holding anything. The camera stopped working too.
I tried restoring through itunes on both my imac and my sis's macbook pro, the problem persisted and it was even more serious.
After restoring i could not even configure. The screen just enlarge, minimise on it's own, going back to the previous page on its own. And after a few seconds it will just HANG there. After restarting it's still the same.
NOW I IT'S LIKE I CANT EVEN USE IT?!?!
I'm getting really fed up with it.

Try a reboot of your ipad. Hold the Sleep/Wake button and Home button simulataneously. Keep holding, ignoring the red slider, until the Apple logo appears. Release the buttons and let the ipad restart. A reboot often fixes numerous problems.
Also are you aware that by suncing with a different computer it is likely the personal stuff you had on your ipad from your imac will be removed?
The ipad is designed to sync with only one device.

Problems with iphone 4s after current update iOS 7.0.4 !

After current update Iphone 4s has no video or music sound, message tones and ring tones work, wifi playing up and Touch screen does not lock when I lift to my face so it mutes call or ends call. apple can you please supply fix?

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.

Problems with monitor/resolution after software update

I installed the latest security update tonight, and now my monitor no longer properly works with my mini. I have a Dell 2005FPW. I was using 1680x1050 resolution with no problems. When I rebooted after the update, I noticed my resolution had been changed... and now the mac only detects my display as a "VGA display" and I can't select that resolution any more! The monitor still works fine with my PC.
How can I get my 1680x1050 back??
Mac Mini Mac OS X (10.4.5)

Do you have a KVM switch to share your monitor between your Mac and your PC? I was getting this problem when I got one of these so my new Mac could share my monitor etc with my old one but found a way round it. In System Preferences -> Displays, tick the 'Show displays in menu bar' box. Then click on 'Detect displays' from the drop down menu. The screen will go blue for a moment and the computer will recognise the monitor for what it is.
Mac Mini 1.4GHz G4, PowerMac 450MHz G4, both Mac OS X (10.4.6) Airport Express

Is anyone having problems with i message after newest update?

since i updated my iphone to the newest 5.1 my imessage isnt working properly.. it will sometimes let me imessage certain people and other times not i was wondering if anyone is having the same problem or knows how to fix it. I have the iphone 4s but i am in europe and i am basically using it as an ipod because it doesnt currently have service. This problem is happening when i am connected to wifi so the imessaging should work...
any thoughts?

Yes, the US-122 is a usb interface. I have been using it for several years now.
I have had no problems until this last OS update, which also included an iTunes update that I have heard folks are having burning problems with.
I can SEE the signal going in (in the sys prefs meters), as well as in LE's meters, but no sound comes out of my monitors. Yet I CAN play songs in iTunes and pre-recorded tracks in LE7 and GB, without problems at all, as well as any other audio from online sources and from the OS, like alerts, etc. It is only audio straight from the US-122 that does not make a sound.
I find it so odd that the OS Sys prefs show a signal, yet no sound is present, while all other apps produce sound as usual.
I have repaired permissions, and have reset SOUND and AUDIO/MIDI setting severals times.
I USED to be able to play guitar through my Vox ToneLab, connected directly to the US-122 into the Mac, whether I was using LE7 or GB or neither. Now I get NOTHING from it at all (aside from the OS meters), no matter what.
I'd suspect a cable if not for the signal in the meters, and the sound from every other audio app, including pre-recorded LE7 & GB stuff.
I have had minor problems in the past, but never anything like this.

Problems with LG Enact after software update to KitKat

After the update, I seem to have
1) Battery charging issues. Problems charging past 96% (or at least appears that way on the notifications bar on my phone). Have had to unplug and/or restart phone to complete the charge and sometimes it doesn't always work.
2) Slower 4G speeds. Often going down to 3G or 1X
3) Phone seems sluggish overall going from app to app and also when typing on the keyboard
4) Freezing when using wifi or phone data plan.
I've googled these problems and appears that other phones have been having one or more of these issues as well. Any ideas on how to fix these issues?

If you've googled, then you likely have seen some of the suggested "fixes". Have you tried:
1) Check your network settings - be sure it'[s set to LTE/CDMA - I've noticed that updates and resets on my phones tend to revert to Global which results in glitchy behavior, at least for me. Resetting to LTE/CDMA and restarting helps.
2) Run a system cache clear, it won't affect any of your data or setting but WILL clear up unused fuiles and processes that may be slowing things down and causing the sluggishness you see.
Performing a wipe cache partition removes any temporary files that may be causing an issue with the device. All personal files and settings are not affected by this option.
Power the device off.
Press and hold the Volume Up and Down button then press the Power button.
When presented with the Boot Mode Selection Menu, release all buttons.
Press Volume Down button to select 'Recovery' then press the Volume Up button.
From the Droid triage screen:
Press and hold the Volume down button.
Press and release the Volume up button.
Release the Volume down button.
Select wipe cache partition then press the Power button.
Use Volume keys to navigate options.
Select reboot system now then press the Power button.
Use Volume keys to navigate options.
3) FDR - Factory Data Reset - be sure all your contacts, photos, etc are backed up - if you use Google to store contacts and auto back up photos and music it should already be backed up. Once you do the reset, restore from Google, and selectively reinstall your apps. This is a last resort, but it can clear out a lot of accumulated gunk.
Hope this helps.

Problem with external HDD after installing updates in Mac os X 10.5 leopard

Hi,
I just went out to the store and bought a copy of the leopard.
I installed it with nothing attached to the computer. Everything went fine.
When I went to update the software I had two packages there that I updates, so I had to restart the computer. when it started again it indicated that it had problems with my Iomega Ultramax 1tb disk. It says that disk repair failed and that I only have limited access to the disk. and since it's ALOT of data on the disk, I don¨t rally got the tools to copy everything to another location and then erase the disk and copy everything back. So does anyone know if there's a solution to this.
I'd be really happy to get a solution on this,
thanks alot.
Rich

When I'm using disk utility and use "verify disk" I get the following message:
"First Aid failed
Disk utility stopped verifying "UltraMax" because the following error was encountered.
Filesystem verify or repair failed."

Problem with 3G network after ios 6.1 upgrade on iphone 3Gs.

I have a iphone 3Gs and not a 5 or 4 and since my ios 6.1 upgrade it's a nightmare for me. I meet a lot of reliability issue with the 3G network. Before the 6.1 upgrade it worked fine. My carrier provider is SFR. It seems to be a "bug" only with 3G. Maybe it's the same as 4Gs but not corrected for 3Gs.
By example I'm using my iphone to join a Free Number to join a confcall system and everytime after sometimes 3 minutes or 15 minutes I'm automatically disconnected - nobody is hearing me and I have to switch off and to reconnect. Others collegue working with me having a iphone 3Gs meet the same issue as me with 3G network.
Do you plan to release the 6.1.1 version for iphone 3Gs ? if yes ? when ?

After testing workaround to disable WIFI when I'm using 3G network. It worked for 1 confcall during 1 hour !! but for the second confcall the duration was only 6 minutes and the network was cut !!! the workaround doesn't work !.
I'm surprise because I don't find similar issue on Internet with "Reliability of 3G on iphone 3Gs after ios 6.1 upgrade!!".
This morning during a call this message appears "Could not activate cellular data network".
Are you in the same case as me ? Do you have a workarounf for me ?

Problem with Z77A-G43 After bios updating

Hi guys
I purchased my main a week ago, the bus of my rams are 1600 but main detect it 1333. So i updated my bios of 2.7 to 2.10 with live update 5, after the updating progress finished my pc restarted, it doest give any picture and after 20 sec reastart again and again!
I shorted the jumper, i brought out the battery but it didn't have any result. Please tell me a solution. And forgave me for my poor english. My pc:
Msi z77a g43
2*4gb 1600
Core i5 3570k
Sapphire 7790 dualX

RAM defaulting to DDR3 1333 is common as the SPD profile of the chips is set for that. For 1600, either manual setting is required or X.M.P. can be tried if the modules have X.M.P. profile.
Live Update bricked your board. Solution is to take the mainboard to a shop with an SPI flash programming device, or obtain RMA for an MSI Service Center, or contact your reseller for instruction.
Next time you need to flash, do it the safe way;
https://forum-en.msi.com/index.php?topic=161593.0

Problem with -hg PKGBUILD after pacman update

After I updated to pacman 4.1.0, my PKGBUILD for sunflower-hg stopped working for me.
For some unknown reason makepkg fails to clone the needed mercurial repo and src directory turns out to be empty at the time of the build.
What has gone wrong?
Last edited by Axon (2013-04-16 08:07:22)

moderator action: I removed the TGN part of the thread. Please do not continue the discussion on whether pacman releases should have a news article in this thread. Thanks.

HT4623 Sound and other problems with Ipad 3 after ios 6.1.3 update

I purchased Ipad 3 last year and got problem of losing sound when I restored the Ipad throgh itunes. The sound came back automatically after I charged the device to 100%. Recently I got the same problem when the operating system was Ios 6.1.2 and then i got updated it to ios 6.1.3. The problem has not been solved while has been added up. Now the Ipad operation is slow, its either freezes and crashes frequently. Once it gets in sleep mode then it does not come back untill i press power button and home button togehter for sometime. I have checked all settings like mute and have restored the ios multiple times on two separate PCs but the problem is still there. Please help me what i need to do next.

Try a reboot of your ipad. Hold the Sleep/Wake button and Home button simulataneously. Keep holding, ignoring the red slider, until the Apple logo appears. Release the buttons and let the ipad restart. A reboot often fixes numerous problems.
Also are you aware that by suncing with a different computer it is likely the personal stuff you had on your ipad from your imac will be removed?
The ipad is designed to sync with only one device.

Problems with incoming iMessages after iOS 7 update

Similar Messages

Maybe you are looking for