PROBLEMS WITH INPUT (M-AUDIO AND LOGIC)

I cant seem to get an answer for this question?I have a powermac G5 2.3Ghz,im using an m-audio firewire 410,with logic pro 7.My previous system was a powerbook G4 older model 667Mgz,I was using logic 4.8.1 on os9 with the 410,and i didnt have this problem at all.My issue is no matter what i plug in to the 410's input my signal starts to clip even when the input knob is very low.I have tried bass,guitar,vocals etc.I cant figure it out.My 410 controls my signal before it get's to the digital domain,so i really dont know what to do,because if my signal is this hot before it gets to the G5,what can i do?

I plugged a normal electric guitar in the front panel of the 410,which is where i always plug my guitars in.If i turn down the input knob it doesn't clip or distort.But i have to turn the knob down almost all the way,same thing with my bass and both instruments dont have active electronics.The other thing i do is apply the pad button,then i could turn the knob up to atleast 10:00.Someone told me that the preamp's dont start to kick in,untill you have the input knob at around 2:00.Why didn't i have this issue with my older powerbook G4?I also updated the drivers on the 410,to the latest one.Funny,now when i try to hook up the 410 to my powerbook G4,it makes all these strange sounds,like the music is going through a crazy effects processor?Do you think updating the drivers did something?I didn't change anything on my old powerbook G4 at all,but like i said as soon as i hook up the 410,the exact same way i originally did,it plays music back in a strange way,almost like it is going through a filter.But when i hook it up to the G5,it goes back to normal?Im confused,any ideas?

Similar Messages

  • Encore CS5 has problems with 5.1 audio and 720p 59.94 fps video

    I keep receiving error messages when i import mpeg2  720p 59.94 fps video with dolby 5.1 audio. It says "does not support video with multiple channel audio" or something to that effect. I have had no problems importing mpeg 2 1080i 29.94 fps video w/ 5.1 audio into encore.
    Is there any solution to this? I have tried importing as a asset and timeline to no avail. I had to convert to 2 channel stereo for it to work.
    thanks.

    What would be the steps to do this and what software or freeware would you suggest. I have never demuxed before so please forgive my ignorance.
    thanks.

  • Problem with merging incmoing audio and video source

    I am trying to record incoming audio and video data but i ran into a weird problem. The datasources merged fine but during playback of the recorded file the video sometimes turns white while audio still goes. For example, if the audio duration is 10 mins , the file length will be 10 mins but the video shows only like 2 mins and then the rest of file is white with sound in background. i am not sure why its happening... i also tried merging the files after recording audio and video individually but still no\ luck. does anyone know why this is happening? thanks

    I am working on Audio/video conferancing . Before sending Audio/Video data from my side
    to other side I am setting SendStream's setSourceDescription with my own name for CNAME . On reciving side some time i am getting correct CNAME which i set to SourceDescription ,but some time it gives default CNAME which is username@computername in steed of giving CNAME set to my name .
    Can you help me to solve this problem
    Thanks & Regards
    Amol Chandurkar

  • I have got problems with my computers audio and sound

    would u pleas help me to fix my computers sound problem

    Welcome to the Forum, ghirmay99!
    Please take a look at the Sound Help document first.   It is helpful for many issues and will help you explain what is wrong if you cannot fix the problem on your own.
    This page is for Windows 7, there are links on the page to Vista and XP if you need those.
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01912228&cc=us&dlc=en&lc=en
    If you need some more help, you should provide your computer's exact model and your Windows OS (7, Vista, or XP).
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00033108&cc=us&dlc=en&lc=en
    You may be instructed in the Sound Help document to download your Sound drivers.  If you have the latest HP Support Assistant loaded, it's easy to use the Assistant to get to your personal web page to get to your computer's web page.
    http://h18021.www1.hp.com/helpandsupport/hp-support-assistant.html
    Once you have the HP Support Assistant downloaded and installed, call up the Assistant and go to the Get Assistance page to find a link to "Access online resources for your PC".
    I hope this helps!             
                                                Kudos make us feel shiny and tall --- Select "Accept as Solution" if this benefits all
    Kind Regards,
    Dragon-Fur

  • My sound is like echo and i can't solve the problem with realtek hd audio manager

    HP G72 notebook
    Windows 7 64 bit
    Sound is like echo and can't solve problem with Realtek HD audio manager

    It's a Qosmio X300-16M (windows 7 64bit)
    I downloaded the last toshiba's sound driver (for win 7 64bit), but it's as if it doesn't contain MaxxAudio anymore... (but the file maxxaudio.dll is still in realtek directory)
    It worked correctly after Windows 7 update, (that's why I tried to reinstall the audio drivers which were in the DVD... but it does not have resolved the problem.)
    And all my system restore's points have been lost after a wrong bios update or something else (but this isn't a problem anymore)
    Now, my computer works correctly, my only problem is that the MaxxAudio tab (from Waves Audio) in the realtek audio manager disappeared... (It just makes a better sound...)
    And I just want to know if it's a curent problem or not... and if someone can fix it

  • I have been having problems with my iPod touch and my WRT...

    I have been having problems with my iPod touch and my WRT54G router. I am so frustrated right now because after following the various steps mentioned in one of these threads, following Earthlink's prompts, and speaking with Apple, my iPod touch will still not work. It is connected to the internet but will not download the pages. It is quite frustrating. I have changed from WPA to WEP, I switched the 4th Generated key to the 1st. I've disabled this, enabled that. I've done just about everything. I updated the firmware. I made the switch from a partial bridge to a full bridge. Still nothing seems to work. Does anyone have any other suggestions? The one thing I have not done is enter the Apple code into the iPod which searches for website...-- I cannot access the internet with my iPod so this web address does not work. If anyone has been successful, will you please give me step by step instructions? Yesterday I was on the phone with Linksys for about an hour. Before that with Apple for about an hour and before that with Earthlink. How it is that I can walk into a Bread Co. or Apple Store and immediately connect to the internet with my iPod but I can't in my own house?? Everyone seems to think it is someone else's problem so I've gone around and around. Not one of the Linksys support personnel suggested I look here on this community forum. I had to pay the $9 fee to have advanced Linksys help but still my iPod does not work and when I called back, the man I spoke with seemed to think the case was closed because my PC, Laptop, and iPod are connected to the internet -- the iPod just won't download the webpages or get mail. My iPod's IP address begins with 192. I would appreciate any help on this matter
    Message Edited by AlliW on 10-02-2008 02:06 PM

    I had the same issues with my iPod touch & iPhone. It's a known issue with the touch & Linksys G routers. Go into settings on the touch & do the following.
    1. Settings - wifi - linksys
    2. Erase your DNS settings & input same numbers as in router
    Settings.
    3. Http proxy should be
    in off position.
    4. Close out & open safari you should now have a wireless
    connection.

  • Duet makes noise after switching between finder audio and Logic

    Hi
    My Duet makes noise after switching between "finder audio" and "Logic", In other words i would play a mp3 in the finder and when returning to Logic all my audio sounds like the "lo-fi" RTAS free plug digidesign gives away now.
    This is happening on a White *iMac 24"*
    Model Name: iMac
    Model Identifier: iMac6,1
    Processor Name: Intel Core 2 Duo
    Processor Speed: 2.33 GHz
    Number Of Processors: 1
    Total Number Of Cores: 2
    L2 Cache: 4 MB
    Memory: 2 GB
    Bus Speed: 667 MHz
    Boot ROM Version: IM61.0093.B07
    SMC Version (system): 1.10f3
    MacOsx 10,5,7

    Does this happen every single time? The same thing happens to me every once in a while. I just close Logic and Maestro and unplug the Duet. Then, in this order, plug in the Duet, wait for it to click, load Maestro, load Logic. Works every time.
    Edit: It does only seem to happen when I switch from Logic and the audio output from the Duet to internal and then come back quickly. I don't think it's an issue with the Duet hardware itself.
    Message was edited by: AecDuck

  • Problems with Input Ready Query

    Hello All,
    I'm facing problems with input ready query for BI IP.
    I've created the input query on aggregation level and maintianed all the planning settings.  It is not allowing me to edit, when i'm attaching in the web template.
    I also attached a button copy function, and i'm able to execute it and save it, but it not allowing me to change manually.
    I also enabled the 3rd option for keyfigures...data can be changed with planning functions and user input.
    Please help me in this regard.
    We have just started the development of BI-IP, please suggest me if there are any notes to be applied.
    Regards
    Kumar

    Hello Johannes,
    Yes I've set to the finest granularity...even if it is Only one characteristic and one key figure without any restrictions...
    I've checked even planning tab page under properties...it is also fine..
    But still it is not allaowing me to go to edit mode...this is a fresh instalation and the query i'm working is the first one...
    Please suggest me if there are any notes to be applied, we are on Support Pack 10.
    Regards
    Jeevan Kumar

  • Problem with input data format - not "only" XML

    Hi Experts,
    I have problem with input data format.
    I get some data from JMS ( MQSeries) , but input format is not clear XML. 
    This is some like flat file with content of XMLu2026.
    Example:
    0000084202008-11-0511:37<?xml version="1.0" encoding="UTF-8"?>
    <Document xmlns="urn:xsd:test.01" xmlns:xsi=http://www.w3.org/2001/XMLSchema-instance Sndr="0001" Rcvr="SP">
    ...content....
    </Document>000016750
    Problems in this file is :
    1. data before parser <? xml version="1.0"> -> 0000084202008-11-0511:37 
    2. data after last parser </Document> -> 000016750
    This data destroy XML format.
    Unfortunately XI is not one receiver of this files and we canu2019t change this file format in queue MQSeries ( before go to XI) .
    My goal is to get XML from this file:
    <?xml version="1.0" encoding="UTF-8"?>
    <Document xmlns="urn:xsd:test.01" xmlns:xsi=http://www.w3.org/2001/XMLSchema-instance Sndr="0001" Rcvr="SP">
    ...content....
    </Document>
    My questions:
    1. Is any way or technique to delete this data 0000084202008-11-0511:37  in XI from this file ?
    2. Is any way to get only XML from this file ?
    Thanx .
    Regards,
    Seo

    Hi Buddy
    What is the XI adapter using?
    If you use inbound File adapter content conversion you could replace these values with none and then pass it to the scenario.
    Does that help?
    Regards
    cK

  • I have some problems with element Panel Label and Message.

    I have some problems with element Panel Label and Message. When I create form from VO attributes then I have Label for input text element. If I use Panel Label and Message element then I need to copy LABEL from input text element to Panel Label and Message element LABEL PROPERTY. Can I define in View object that I don't need label and want all attributes in Panel Label and Message element?
    BEST REGARDS

    You can simply remove the label attribute for the input text on the page.
    sid

  • I'm having problems with Flash Videos (Youtube and ESPN)

    I have been having this problem for the last couple of days now and it is really annoying. Whenever I watch a flash video like on youtube or espn my computer freezes up and the audio will make a loud buzzing sound. I have attached a video with the post so you can see what happens. I don't have problems with anything else except this. I also get this error no matter what browser I use. I have system restored my PC as far as I can go, and I've ran a ton of scans and driver update checks and nothing seems to work.

    merci a tous pour les nombreuses réponse. j'ai dû mal a les lire vue que je ne lit que le français. je vous remercié encore une fois amicalement. Blanchette 2.
    Date: Mon, 25 Jul 2011 19:50:19 -0600
    From: [email protected]
    To: [email protected]
    Subject: Re: I'm having problems with Flash Videos (Youtube and ESPN)
    What I meant is Hardware Acceleration off (disabled).
    >

  • I'm Having problems with the video freezing and the sound carrying on since I up graded my iPad to ios8  BBC IPLAYER

    I Am having problems with the video freezing and the sound carrying on whilst watching BBC IPLAYER ITV PLAYER until I reboot video and the problem acures again

    Your Mac runs maintenance in the background for you.
    Command + R gives you access to restore, repair, or reformat the drive using OS X Recovery
    No idea why that was suggested.
    You may have a third party video player installed that's causing an incompatibility issue.
    Check these folders:
    /Library/Internet Plug-Ins/
    /Library/Input Methods/
    /Library/InputManagers/
    /Library/ScriptingAdditions
    ~/Library/Internet Plug-Ins/
    ~/Library/Input Methods/
    ~/Library/InputManagers/
    ~/Library/ScriptingAdditions
    The first four locations listed are in the root-level Library on your hard disk, not the user-level Library in your Home folder.The tilde (~) represents your Home folder.
    To access the Home folder in OS X Lion or Mountain Lion, open the Finder, hold the Option key, and chooseGo > Library.

  • Problem with microphone fading in and out

    Spoiler (Highlight to read)
    I have been having problems with my Skype audio (I can hear callers but they can't hear me). I purchased a new Logitech H390 USB headset today and have checked that it is all working, I've been through all the checks that Skype suggest and I'm still having the same problem. Echo test is fine, trying the microphone on other recording devices is fine but when I'm actually on a call, the microphone seems to fade in and out. Hope someone can help me - I'm a virtual receptionist and need this problem sorted ASAP.
    Thanks in advance

    hoi body alles is goed  met jou

  • I downloaded a new version of firefox. It said it had problems with my norton toolbar and now it doesn't feature it in the window. I'm not that comp savvy. How do I either get the Norton toolbar up or go back to the old firefox? Thank you.

    I downloaded a new version of firefox. It said it had problems with my norton toolbar and now it doesn't feature it in the window. I'm not that comp savvy. How do I either get the Norton toolbar up or go back to the old firefox? Thank you.

    Please authorize ADE 3 with same credentials that you used with older version of ADE

  • After having yet another problem with my MacBook Pro and having to wipe the drive, I am now unable to sync my iPhones etc without erasing all the music on them. Is there a way around this? I have no other library!

    After having yet another problem with my MacBook Pro and having to wipe the drive, I am now unable to sync my iPhones etc without erasing all the music on them. Is there a way around this? I have no other library!
    iTunes is a mess! It couldn't find it's own libraries and I was forced to create a new one. Now I don't know where my music is or if any's missing.

    columbus new boy wrote:
    How crap is that?
    It's not crap at all.
    It's not that simple. For example, I've 3500 songs on my MacBook but don't want them all on my phone, so I have to manually select each song again???
    There has to be a solution.
    Why not simply make a playlist with the songs you want on the iPhone?
    and maintain a current backup of your computer.

Maybe you are looking for