Problems with installation on Windows XP Pro with SP1

Hi! I've two problems during installation.
I try to install Oracle 10g Enterprise
First:
Checking Network Configuration requirements ...
Check complete. The overall result of this check is: Not executed <<<<
Recommendation: Oracle supports installations on systems with DHCP-assigned IP addresses; However, before you can do this, you must configure the Microsoft LoopBack Adapter to be the primary network adapter on the system. See the Installation Guide for more details on installing the software on systems configured with DHCP.
Second:
Checking service pack requirements ...
Check complete. The overall result of this check is: Not executed <<<<
OUI-15038: Unable to execute rule 'CheckServicePack' from ruleset 'ServicePackChecks'. The underlying test 'oracle.sysman.oip.oipc.oipcz.OipczServicePackChecks.checkServicePack' has thrown an unhandled exception [For input string: "Pac"]. If the exception results in a failure of the test and the exception needs to be propagated, then encapsulate the exception in the result object and return the result.
Recommendation: Install the recommended Service Pack.
What I should to do?
Message was edited by:
user465581

Hey Guys,
I am Srinivas Here who had been trying to install Oracle Database 10G on Windows X86 on Windows XP Professional.
If you have Win-XP Professional as your Operating System. Do not download the oracle Database using windows - XP Professional because XP will block certain installation files while downloading. In your machine install Windows 2000 or any other Windows version as a dual boot. First the download Database Zip files using your other version of Windows Operating system and then when you Unzip the files it will create a folder called Database and all the files will be present in it.If you want to store the same to cd for having to install the 10G Rel 2 database through CD then copy the contents of the unzipped database folder and store only the contents of the database folder and write them to CD's. Please see to it that while writing on cd's do not copy the folder itself .
After this, restart the system and get into windows XP Professional (Your XP Professional should be with Service Pack 2 in order to install 10G Database on windows XP - The Basic requirements for Oracle Database 10G on Windows X86).
I request you to check the software and hardware requirements from oracle Documents before you install the Oracle Database 10G on Windows x86 as well as Oracle Database 10G on Linux X86 or any other operating systems.
Finally, After you run the Oracle Universal installer in the last you will get messages for all products installed Success and finally it will ask the password for DBA and open the password management and give the password and reenter password and on the left you will have to unlock the items you would like to use.
In the last it will give you various URL links for Isqlplus, DBA, Enterprise Manager and a log report stored into oracle directory stored in your C:\Program files\Oracle folders. The correct link will be given at the end and you will have to watch the installation carefully.You can find DBCA and other options working. Try login in to Oracle through Command prompt, Sqlplus prompt availabe in Start ->Programs->Orahome10G->application Development-sqlplus as well as login through isqlplus link- Before this you should login at the command prompt as SYSDBA. YOU CAN SEE THAT YOUR DATABASE IS NOW WORKING IN WINDOWS XP PROFESSIONAL.
THANKS IN ADVANCE TO ALL FORUM MEMBERS WHO GAVE ME IDEA AND SUPPORT
REGARDS,
SRINIVAS

Similar Messages

  • Problems with installation of Windows 8.1 with Arch Linux GPT

    Hi everyone, I have Arch Linux installed in EFI MODE with a GPT Partitioned disk. I'm trying to install Windows 8.1 on a partition, but the message that i get is "Windows cannot be installed to this disk. The selected disk is not of the GPT partition style". How I can solve this? Thank you for reading me.
    Giuseppe

    The output is
    Number Start End Size File system Name Flags
    1 1049kB 106MB 105MB fat32 EFI system partition boot, esp
    2 106MB 1050MB 944MB ntfs Basic data partition hidden, diag
    3 1050MB 131GB 130GB Basic data partition msftdata
    4 131GB 152GB 21.5GB ext4 root
    5 152GB 168GB 16.1GB ext4 var
    6 168GB 201GB 32.8GB ext4 home
    7 201GB 479GB 277GB ntfs Basic data partition msftdata
    The partition in which i'd want to install Windows is the number 3.
    I had windows before arch, then i installed arch having both on my computer. Only lately i have deleted windows, but i need it now so i'm trying to install it again...
    Last edited by sillettig (2015-01-25 09:41:06)

  • Problem during installation of EHP4 on IDES with preinstalled EHP3

    I have a problem during installation of EHP4 on IDES with preinstalled EHP3(I got it with media sent last year in april).
    Namely during PREP_EXTENSION/EHP_INCLUSION! phase i got error:
    Severe error(s) occured in phase PREP_EXTENSION/EHP_INCLUSION!
    Last error code set: Component 'WEBCUIF' not found
    When checking components of ECC system I did not found 'WEBCUIF' component whereas in xml file (generated by SOLMAN) it exists. Which direction I should take. I am afraid to delete entries in xml file.
    I need help

    When checking components of ECC system I did not found 'WEBCUIF' component whereas in xml file (generated by SOLMAN) it exists. Which direction I should take. I am afraid to delete entries in xml file.
    You need to download and install all requirements as selected by Solution Manager for EHP4, WEBCUIF is a required component. Do not delete any entries in the xml file.
    Nelis

  • HT5639 Do I need to uninstall boot camp 4 before I install and update to boot camp 5. I already have windows 8 pro with boot camp 4 installed. Do I need to unistall boot camp 4 or not necessary?

    I already have windows 8 pro with boot camp 4 installed on my macair book 11". I have searched the entire articles on how to upgrade boot camp 4 to boot camp 5 but have found no answer as to my question: Do you have to uninstall boot camp 4 drivers before you install boot camp 5? I am not sure if it is ok to install boot camp 5 directly without uninstalling boot camp 4 because there might be driver version conflict. So I have not installed boot camp 5. Is it ok to install boot camp 5 withoust uninstalling boot camp 4? Your answers will be much appreciated. Thanks.

    Welcome to Apple Support Communities
    You don't have to uninstall Boot Camp 4 drivers before installing Boot Camp 5 drivers. Boot Camp 5 drivers will simply overwrite Boot Camp 4 drivers, so you don't have to uninstall old drivers before installing new ones and making that process easier

  • How to authorise more than one machine (1 tablet Android and one PC running Windows XP Pro) with the same Adobe ID ?

    How to authorise more than one machine (1 tablet Android and one PC running Windows XP Pro) with the same Adobe ID ?

    Cloud License allows 2 activations http://www.adobe.com/legal/licenses-terms.html
    -Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0
    -Windows or Mac does not matter... 2 on the same operating system, or 1 on each

  • DVD/CD unit not found after installation of Windows 8 PRO

    After installing Windows 8 PRO I cannot play a dvd. The trouble seeker says: The hardware can not start due to damaged or incomplete config info in the register (code 19).
    When searching for a new driver I'm told that I have the latest one. I read on Microsoft support that a similar problem occured on installing Vista, but the solution should not be applied on this installation.
    What else is to do about this problem?

    > After installing Windows 8 PRO I cannot play a dvd. The trouble seeker says: The hardware can not start due to damaged or incomplete config info in the register (code 19).
    If you would use the Toshiba forums Advantage search option, then you would find this info:
    http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/bulletinDetail.jsp?pf=true&soid=3516888
    +If the TOSHIBA Recovery Media Creator or TOSHIBA Disc Creator are installed on the HDD, there might be a issue between Win 8 and mentioned software+
    +So uninstall these tools, then restart your PC using the Power-->Restart option in Windows 8. Your CD/DVD should be accessible now.+

  • Question when I log into Firefox, the screen scrolls down and I have to use the side-bar to go back up to type my query into the 'search' window. How can I stop that and get Firefox to start with the 'search' window accessible? With thanks, Peter

    Question
    when I log into Firefox, the screen scrolls down and I have to use the side-bar to go back up to type my query into the 'search' window. How can I stop that and get Firefox to start with the 'search' window accessible? With thanks, Peter

    See this. <br />
    https://support.mozilla.com/en-US/kb/Firefox+hangs#Hang_at_exit

  • When I log into Firefox, the screen scrolls down and I have to use the side-bar to go back up to type my query into the 'search' window. How can I stop that and get Firefox to start with the 'search' window accessible? With thanks, Peter

    Question
    When I log into Firefox, the screen scrolls down and I have to use the side-bar to go back up to type my query into the 'search' window. How can I stop that and get Firefox to start with the 'search' window accessible? With thanks, Peter

    See this. <br />
    https://support.mozilla.com/en-US/kb/Firefox+hangs#Hang_at_exit

  • MSI 975X PROBLEM WITH INSTALLATION ON WINDOWS VISTA

    I have MB MSI-975X PLATINUM v.1 withbios ver 1.3,processor Pentium D940 (3,2GHz/800/2x2MB),2X512MB DDR-2 667MHz,in the beginning when I start the installation on WINDOWS VISTA  the computer is bloked od it is restart.This problem I solved when I put another processor INTEL 541(3,2GHz/800/1MB) whit this processor everthing is ok,but with INTEL 940 it can not be install WINDOWS VISTA .
    I’m asking you for a new superstructure on bios update .

    Beta 2 or RC1 candidate???? RC1 should support..........
    Beta 2 is real, slow and you have alot of updates to DL, but both are pre-release products and will not work 100%.
    Even when Vista is released, they will still be alot of hardware that will not work 100% and this is purely because software is always playing catch up to hardware.
    It was only September, when Nvidia released some Beta2/RC1 drivers that worked properly........

  • Problem trying to add Windows 7 Pro on a 256GB SSD with Windows 8.1 preinstalled

    I shrunk the SSD down leaving about 100 GB for Win 8.1 and formatted the remaining space creating an NTFS partition for the Windows 7 (DVD) install. I disabled quick boot and changed the boot order so the optical drive is first. When I attempt to boot
    from the disk, it freezes before i get to the screen to choose which partition to install to.
    So i then changed the bios from UEFI to CSM, and now i make it as far as the screen to choose the partition, but it won't let me install on the newly created SSD partition, with the message: "windows cannot be installed to this
    disk. The selected disk is of the GPT partition style", greying out the install button when trying to select this partition. However, when I select one of the 1.5 TB HD's, the install button becomes active. But I really want to install Windows
    7 on the SSD.
    My machine is a Toshiba Qosmio X70 with 32GB ram, two 1.5 TB HD's and a 256 GB SSD

    My suggestion:  Clear the whole thing and just install Windows 7 on it.
    If you feel you really might want to get back to 8.1, do a System Image backup to an external USB drive that you can potentially restore at a later time.
    Trying to dual boot two different versions of Windows is fraught with peril.  It can be managed but you really need to know what you're doing.  It's better to choose one operating system and just optimize it to do all you need to do.
    -Noel
    Detailed how-to in my eBooks:  
    Configure The Windows 7 "To Work" Options
    Configure The Windows 8 "To Work" Options

  • How do I install windows 8 pro with osx 10.9 Mavericks?, How do I install windows 8 pro with osx 10.9 Mavericks?

    Hello everyone I just purchased a brand new mac and I am trying to install windows 8 pro using bootcamp assistant. I get through almost the entire install when i get an error message that says "installation cannot proceed files missing" something like that...
    my windows 8 pro is brand new and I downloaded osx mavericks from the app store has anyone else had this problem can anyone help me????!?!?

    Hi. Because both Mavericks and Windows 8 are still new, they may not be free of error. Apple needs more time to perform more tests to ensure that these two different OS's will work properly without getting in conflicts. If it's posdible, I highly recommand you to downgrade back to Lion or Mountain Lion and install Windows 7 (if you have a copy of it). In my experience, all advises from Genius Bar members and computer articles confirm that  Windows 7 will work on Macs with Lion OS. It should also work on Mountain Lion. Besides Boot Camp, you could try to virtualize Windows OS and its applications by using VirtualBox, CrossOver and other VMs. I already have an Oracle VirtualBox but I would like to try Boot Camp since it allows me to enjoy almost all Windows features that may be limited in VMs.

  • I want to Install Windows 8 Pro with Bootcamp

    I have Windows 8 running currently on Parellals 8. I cannot enter my product key for Windows yet but can use my flight simulater which works perfectly. I have tried to install Windows 8 using bootcamp (just to keep up to date) but keep getting the error
    "Your Bootable USB drive could not be created     An error occurred while formatting the disk"
    This is using a 32 GB Adata S107 USB 3 stick and Windows 8 Pro on disk. The Windows 8 is a full version. All I do is drag the disk icon from my desktop to the ISO image space on Create Bootable USB Drive for Windows Installation page. Then I get the error.
    How do I install Windows 8 full version onto my MBP Retina 2.6 GHz with Bootcamp?

    I really dislike Win 8. It is made for desktops and tablets but is bad on the desktop.
    During the public beta, MS gave users a way to bypass the Metro interface (MS themselves no longer call it Metro. Lord knows why). Just before the official release, they declared Metro was so great, everyone should be forced to use a tablet interface on a desktop computer and removed the simple option to bypass it. It didn't take long for others to develop and release ways to get around that. Here's three options. The first two cost a few bucks. The last is a freebie.
    https://licensing.thinix.com/products/Product.aspx?ProductID=6472
    http://www.startisback.com/#download-tab
    http://forums.mydigitallife.info/threads/35189-Windows-7-explorer-for-Windows-8
    As I don't have Win 8 myself, I have not tried any of these. On the last link the author of the freebie (next to the word Download) even notes the second option, StartIsBack, is better than his attempt.
    Overall, I've read that Win 8 is better than Win 7 as far as performance. Faster and better security. It's the Metro interface many people can't stand.

  • SAP ECC 6.0 installation in windows 2008 clustering with db2 ERROR DB21524E

    Dear Sir.,
    Am installing sap ECC 6.0 on windows 2008 clustering with db2.
    I got one error in the phase of Configure the database for mscs. The error is  DB21524E 'FAILED TO CREATE THE RESOURCE DB2 IP PRD' THE CLUSTER NETWORK WAS NOT FOUND .
    DB2_INSTANCE=DB2PRD
    DB2_LOGON_USERNAME=iil\db2prd
    DB2_LOGON_PASSWORD=XXXX
    CLUSTER_NAME=mscs
    GROUP_NAME=DB2 PRD Group
    DB2_NODE=0
    IP_NAME = DB2 IP PRD
    IP_ADDRESS=192.168.16.27
    IP_SUBNET=255.255.0.0
    IP_NETWORK=public
    NETNAME_NAME=DB2 NetName PRD
    NETNAME_VALUE=dbgrp
    NETNAME_DEPENDENCY=DB2 IP PRD
    DISK_NAME=Disk M::
    TARGET_DRVMAP_DISK=Disk M
    Best regards.,
    please help me since am already running late with this installation to run the db2mscs utility to Create resource.
    Best regards.,
    Manjunath G
    Edited by: Manjug77 on Oct 29, 2009 2:45 PM

    Hello Manjunath.
    This looks like a configuration problem.
    Please check if IP_NETWORK is set to the name of your network adapter and
    if your IP_ADDRESS and IP_SUBNET are set to the correct values.
    Note:
    - IP_ADDRESS is a new IP address that is not used by any machine in the network.
    - IP_NETWORK is optional
    If you still get the same error debug your db2mscs.exe-call:
    See the answer from  Adam Wilson:
    Can you run the following and check the output:
    db2mscs -f <path>\db2mscs.cfg -d <path>\debug.txt
    I suspect you may see the following error in the debug.txt:
    Create_IP_Resource fnc_errcode 5045
    If you see the fnc_errcode 5045
    In that case, error 5045 which is a windows error, means
    ERROR_CLUSTER_NETWORK_NOT_FOUND. This error is occuring because windows
    couldn't find the "public network" as indicated by IP_NETWORK.
    Windows couldn't find the MSCS network called "public network". The
    IP_NETWORK parameter must be set to an MSCS Network., so running the
    Cluster Admin GUI and expanding the Cluster Configuration->Network to
    view all MSCS networks that were available and if "public network" was
    one of them.
    However, the parameter IP_NETWORK is optional and you could be commented
    out. In that case the first MSCS network detected by the system was used.
    Best regards,
    Hinnerk Gildhoff

  • Any experience with Paralles and Windows XP Pro? Advise?

    I am new in Mac world. I understand Parallels software will let you install windows on a HD partition.
    Any suggestions to make this process as expedite as possible?
    How big is the partition required?
    Is it possible install windows based aplications on that partition? software?

    I have a core 2 Duo (3.33) iMac with 8GB and run Parallels 7 with a Windows 7 operating system. I use it for surfing the web and Microsoft business applications. I find no problem with heat and speed. For everything else, I use OSX.
    I was using the same product/operating system on a MacBook Pro (2005) Core 2 Duo with 8GB of RAM and had no difficuties either.
    THe problem with Bootcamp is you have to reboot your machine to switch between OSX and Windows. That was a killer for me. In addtion, with Parallels, you can drag files accross platforms if necessary.
    I haven't tried Fusion. You can download a trail of Parallels and see how you like it before you commit to a purchase. There are online sales from time to time and you can buy the product for less than $40.00.

  • TS1717 cant get ipad to sync with itunes on windows 8 pro operating system any suggestions?

    Please help, I am trying to get my Ipad to sync with my intunes account and am having trouble doing so. Any suggestions?  I have Windows 8 Pro as my operating system.

    I have the same problem  Anyone have any ideas

Maybe you are looking for