Problems with installing coldfusion mx and setting up CF for home practice

problems with installing coldfusion mx:
hello,
i have some books of cf.
i need to start on my tutorials
however,
they said the prereq is mx server
home site,
1. i did download mx 7 and chose mx developer edition.
my problem is that when it is self configure. (the second
option without apache or iis)
it is reall taking a long time to configure 2hrs. i did not
let it finish so i stopped the process.
what am i doing wrong in the set up process.
2. do i need apache to run CF. if so i did go to apache .org
and went to a mirror site. but i dont know which one to down load.
any tips?
3. can i run my tutorials with out apcahe or IIS?
4 . the book also mentioned homesite / dreamweaver as a
editor.
where and how can i put this in my personal PC?
i really appreciate your help in advance
i am really eager to learn so i can develop for my work, i
figure if i get a head start at home, i wont have to rely on
others.
thanks if someone can help me set up CF at home.

i got a copy from a disc today and i installed it.
i think this one is good.
i also have apcahe 2.0 together in a cd.
i need a walk through on both
mx 7 and apache 2.0 for installing and configure.
can you help me?

Similar Messages

Problem with installing both 32 and 64bit Java7u45

Hi all.
For some reson we need to install Java7u45 because of an inhouse made application only runs on java7u45 32bit,
Now to my issue, we hava about 200 windows7 x64 machines who need both 32 and 64 bit java7u45.
If i install the 32bit the inhouse appliction works, but then other third party application will not run (SoapUI, Eclipse).
If i install both 64 and 32 bit the inhouse application will not run, i get this error message "NativeSwing[1]: Caused by: java.lang.UnsatisfiedLinkError: Cannot load 32-bit SWT libraries on 64-bit JVM"
In the Java Control Panel only the 64bit java shows up, and if i try to add javaw.exe from C:\program files (x86)\java\bin it will add the correct line, and i looks ok until i close the java control panel and open it, it will still only show the 64bit java.
So is there anyway to change the default 64bit java to 32bit and make it stick?
Thank you.

panosk wrote:
uwinkelvos wrote:This isn't GWT, is it?
Hi, is there anybody using Eclipse and GWT in arch 64?
I use Eclipse Galileo 64 bit and trying to use GWT I get the error "...wrong ELF class: ELFCLASS32 (Possible cause: architecture word width mismatch)..."
Should I nstall bin32-jre from AUR and use it to start a 32 bit version of Eclipse? Is there another way using the 64 bit version of eclipse?

HT1430 Hi just bought i pad air and set up wifi for home and uploaded contacts to i cloud from my i phone can receive mail but cant send it says server rejected recipient /

HI just bought new i pad air set up email and wi fi and uploaded contacts to i cloud contacts now available but will only receive mail wont send to recognised contacts says server rejected contact

iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say "Cannot Connect to Server"?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621
The iPad's Mail app has no provisions for creating groups. However, you can use a third party app that many users recommend.
MailShot - https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
Group Email - https://itunes.apple.com/us/app/group-email!-mail-client-attachments/id380690305 ?mt=8
iPad Mail
http://www.apple.com/support/ipad/mail/
Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
 Cheers, Tom

HT3748 Problems with Microsoft Exchange 2003 and setting up mail on my Mac OS X

My Microsoft Exchange Server is 2003 and although I can set up email on iPhone and iPad, I cannot set it up on my MacBook Pro. It won't accept my password - says it is not correct.

How to set up Outlook.com with IMAP
Outlook.com or Hotmail.com IMAP setup
Getting Hotmail IMAP to Work on a Mac

Problem with installing Oracle UI and Oracle SP (ouiosp220160.jar)

Hello,
I have downloaded the installation file for Oracle Universal Installer and Oracle Software Packager which is in the form of a jar file:
ouiosp220160.jar.
WhenI try to extract it, the JVM says that the jar file is a corrupt one.
So, I downloaded it again and still it is a corrupted one.
What to do now? Is it in the corrupt form on the site or I am missing something?
Any other mirror site?
Please help.
-Sameer

Yes use a different ORACLE_HOME's for the Database,
The Application Server (Needs 2 Oracle Homes if you are installing it on one server) and the developer suite - I would expect to see this more on a client PC than a server but if you are trying everything out on say a windows box then that also needs its own HOME.
Have fun.

Problem with installing Coldfusion Hotfix APSB13-10

I am using Coldfusion 9.0 and have downloaded the required files CF9.zip and CFIDE-9.zip and extracted them. I cannot find the file 'WEB-INF.zip' file in the CF9 directory referenced in the instructions. The only update file in the CF9 directory is 'hf900-00010.jar'. Where can I get this file? I don't know if I can proceed without it. I'm partly through the fix and am now concerned about any reboot without fully completing the fix.

Hi,
You don't need the WB-INF.zip to be updated. You only need to update the jar file from CF9/lib/updates and the Extract all the files in CFIDE-9.zip to merge in the web root directory that has {CFIDE-HOME} directory. If you follow the instructions step by step, you should not face any issue.
Regards,
Anit Kumar

Midi/browser playback problem with Audigy 2 platinum (Cannot set Default Device for some reas

Currently I'm having problems playing back mid files in Mediaplayer and various other default programs. I can play midifiles in Winamp by setting it to the proper Directsound device. However in control panel/sound setup (MIDI music Playback), It only lists the MIDI Out Devices instead of the playback one and is defaulted on BLANK when I enter it. I have a feeling this is the main problem.
DX Diag plays back the midi fine. I have tried reinstalling the latest drivers and the drivers from the disc with no luck at all. Also the default language has been stuck on Japanese as well. I have no idea why it started doing this but it seems to also affect any sound playback in my web browsers since I don't even get sound from any Flash files or Google video.Message Edited by zoglog on 06-23-2006 :38 PMMessage Edited by zoglog on 06-23-2006 :38 PM

Ok, well I did a clean sweep and clean reinstall of the drivers that fixed my language problem. However I cannot get the proper "Midi music playback" Default Device. Whenever I change it to something it reverts it to a blank no matter how many times I change it or uncheck "Use only default devices"
It does the exact same thing for "Voice playback"
I'm not sure if this is related but I don't get any sound from any web-browser Shockwave flash files.
This is really starting to get fustrating. Any help input would be greatly appreciated. I think the worst part about this is I know the midi works, it just won't let me assign the device....
Oh yeah, also even if I set the "place volume icon in taskbar" option in the sound and devices properties it wll not show. Not sure if this is related...Message Edited by zoglog on 06-23-2006 :44 PM

Problems with LabVIEW 7.1 and lock-in amplifier Stanford SR530?

Does has anybody had problems with LabVIEW 7.1 and the instrument driver for the lock-in amplifier Stanford SR530?
With LabVIEW 6 there are no problems at all, but with LabVIEW 7.1 it is impossible to communicate with the instrument.

amr_attia wrote: (Private message, no need to private message)
My problem is to get the data out from the divice x and y readings . Can you help me
Here is the code and snippet. I had it from before. It reads Channel 1 and Channel 2 from the SR530, that is whatever the display is for Channel 1 & 2. You set the display manually or programmatically, I let you figure that part out.
Cheers,
mcduff

Problem with installing and uninstalling applicati...

hi all,
I have a problem with installing or uninstalling apps on 808. When i try to install an application through Nokia suite or when trying to run the application file from the phone's memory the screen freezes and becomes unresponsive but the 3 phone buttons work just fine. I have to shut down the phone and the screen becomes responsive again. Anything available to help me wiith this situations as I cannot use any of the apps I have. Any help much appreciated.
Regards
Alex

You are not alone. Im also having the same issue because we do alot of install and uninstall apps. This is the bad point of symbian. But I tired to install the latest FP2 it will be slightly abit smoother now. So you have the latest version now but did you tired to restore any backup yet? It might be the setting on when you restore that affect it. The feezing should be shorten on FP2 but it will still remain there depending on the type of apps from what I experience.
I hope they will provide multiple function to uninstall apps since it will go through a long process to uninstall apps 1 by 1.
Reason is because some apps will go through process like preparing install, process install, finalising install which take away your control for that few seconds or a minute instead runnning in background mode. Its not convenient to uninstall more apps.

I have problem with syncing in itunes and it stared since i installed new version of itunes.it stuck in backup step for houres.what shud i do?

I have problem with syncing in itunes and it stared since i installed new version of itunes.it stuck in backup step for houres.what shud i do?

So, in iTunes, when you look at the shuffle's content (in the sidebar) and click on the playlist under the shuffle, over to the right, the songs are in your desired order, correct? Where do you look, or what do you do, that indicates the playlists are in alphabetical order? Are you saying that when you play the songs while using the shuffle, they play in alphabetical order?
If so, when you listen to the songs on the shuffle, are you using the playlist, or are you using the All Songs list? If you are in the default All Songs list, with the shuffle's power switch set to play-in-order (the middle position), the songs play alphabetically, I believe.
The 3rd gen shuffle uses VoiceOver. If you are in the All Songs list, you need to use VoiceOver to switch to the playlist (see manual linked below for details). When you are in the playlist (with the shuffle's power switch set to play-in-order), then the songs should play in playlist order.
There are more details in the manual for the 3rd gen shuffle, which is online here
http://manuals.info.apple.com/en_US/iPod_shuffle_3rdGen_UG.pdf
See page 22 for the section about setting up and using VoiceOver. The part about switching playlists starts on page 23 (Using the Playlist Menu).

Problem with installing Photoshop elements 9 and adobe support advisor

Hi, I've received a graphic tablet with 2 programs: the first has been downloaded and works perfectly while the second, PSE9, has been giving me problems for at least a week!
I downloaded it and now I have a winzip file full of strange things (one of this is set up exe which tells me that I have to install adobe support advisor) and two files which said 3DF.tmp and PSEP9(1).zip.download and if I try to click them they tell me that I have to find on the Net the program to open them because I can't. And I don't know which program is required.
I tried a lot of times to download the adobe support advisor, I have enough space on my disc and my farewall is deactivated, but when the program begins I saw this annoyant message
cpsid_82829s5 Missing installation file bootstrapper error occured
with this code for a support from adobe 00-67325-032018052012
I unistalled it and retried, but nothing.
Please, I just want to use my tablet with the programs which are comprised in the package, why it's so difficult to download this damn photoshop elements 9????????????
Thank you

In the error message it doesn't tell me
"Installer has detected that a machine restart is pending. It is recommended that you quit the installer, restart try again,"
neither "Installer failed to initialize. File not found. Please download Adobe Support Advisor to detect the problem."
and I have enough space and I have Windows xp then I should be able to install it. I tried to unistall and install again the support advisor but nothing. I'm desperate.
Messaggio originale----
Da: [email protected]
Data: 18/05/2012 22.20
A: "Questionlady"<[email protected]>
Ogg: Problem with installing Photoshop elements 9 and adobe support advisor
Re: Problem with installing Photoshop elements 9 and adobe support advisor created by Jeff A Wright in Trial Download & Install FAQ - View the full discussion
Did you try the steps listed in http://helpx.adobe.com/creative-suite/kb/troubleshoot-error-messages-b ootstrapper-cs5.html which was identified by the Adobe Support Advisor? If so can you please list each step and the result of those steps. This will allow us to best advise you on your next steps.
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4420419#4420419
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4420419#4420419. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Trial Download & Install FAQ by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Has anyone in this Forum had problems with installing and running Adobe apps on the new MacPro?

Has anyone in this Forum had problems with installing and running Adobe apps on the new MacPro?
I have been trying to install Photoshop CS6 & CC and Acrobat Pro XI on my Mac Pro (late 2013). I keep getting a 'configuration' error message and wondered if the problem was wide spread.
TIA,
Jerry

Thanks, Martin.
Good to hear someone has had success. The lack of it here is frustrating and depressing.
Thanks again,
Jerry

Severe problem with installing and starting Audio-DVD Pla

Hi,
after installing the new drivers (SBAX_PCDRV_LB_2_8_000.exe) for my Audigy2ZS in XP SP3 i had np mic boost and the mixer did not show the mic as an selectable source. So i rolled back to my old drivers and after that i have problems with installing and starting the Audio DVD Player. I tried so far: uninstalling everything like its said solution ID 72, checking HD for corrupted files and i did a repair installation of XP. Nothing helped. When i only install the drivers and the DVD Audio Player from the original CD everything is fine until the reboot adter installation. When the OS tries to start the "chkcolor.exe" the PC instantly reboots. When preventing XP from doing so, there is no reboot, but as soon i want to start the DVD Audio Player a reboot occurs again. When i try to uninstall the DVD Audio Player before unstillaing the drivers, the is also a reboot. First uninstalling the drivers and then the DVD Audio Player, there is no reboot.
Any ideas?
Best regards and thank in advance,
PicknatariMessage Edited by Picknatari on 07-20-2008 07:3 PM

Hi,
after installing the new drivers (SBAX_PCDRV_LB_2_8_000.exe) for my Audigy2ZS in XP SP3 i had np mic boost and the mixer did not show the mic as an selectable source. So i rolled back to my old drivers and after that i have problems with installing and starting the Audio DVD Player. I tried so far: uninstalling everything like its said solution ID 72, checking HD for corrupted files and i did a repair installation of XP. Nothing helped. When i only install the drivers and the DVD Audio Player from the original CD everything is fine until the reboot adter installation. When the OS tries to start the "chkcolor.exe" the PC instantly reboots. When preventing XP from doing so, there is no reboot, but as soon i want to start the DVD Audio Player a reboot occurs again. When i try to uninstall the DVD Audio Player before unstillaing the drivers, the is also a reboot. First uninstalling the drivers and then the DVD Audio Player, there is no reboot.
Any ideas?
Best regards and thank in advance,
PicknatariMessage Edited by Picknatari on 07-20-2008 07:3 PM

?I am getting an error when installing on my dell inspiron with latest updates for drivers. Error 1406. I have the problem with Scan Snap software and a full version of reader.

?I am getting an error when installing on my dell inspiron with latest updates for drivers. Error 1406. I have the problem with Scan Snap software and a full version of reader.

Error 1402 | Error 1406 | Acrobat, Reader

Trying to install the latest version of iTunes and when it is being installed I get the message "There is a problem with this installer package. A program quired for this install could not be run. Contact your support personel or package vendor."

I am trying to install the latest version of itunes and when the install begins I get the message "There is a problem with this Windows installer package. A program required for this install could not be opened. contact your support personnel or product vendor". I ran a troubleshooting diagnostic on my computer and nothing flagged as a problem. I uninstalled iTunes and tried again and now I don't have any way to sync my ipod touch. Please help with any suggestions!!!

Just in case, let's try a standalone AppleSoftwareUpdate.msi install.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe, and select "Extract to iTunesSetup". WinRAR will expand the contents of the file into a folder called "iTunesSetup".
Go into the folder and doubleclick the AppleSoftwareUpdate.msi to do a standalone ASU install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleSoftwareUpdate.msi again.)
Does it install (or uninstall and then reinstall) properly for you? If not, what error message do you get? (Precise text, please.)

Problems with installing coldfusion mx and setting up CF for home practice

Similar Messages

Maybe you are looking for