Problems with Installing iTunes and wireless network connection

Every time I attempt to install iTunes it completely kicks the internet off and an error comes up that the wireless network adapter to not connect or is not detected. My internet service is connected to a router which I receive wirelessly to my laptop. I do not understand why it is happening and to get the internet to work again I needed to do a system restore. Any ideas why this is happening. Also when iTunes was installed it came up correctly, it would just not connect to the net. I have had a previous version on my old laptop but since purchasing this new laptop I am having such difficulty. On another note, if this problem can be resolved, once iTunes is working is there a way to get the songs from my old computer onto the new? Thanks for the help in advance!

I just saw your post and I resolved this on mine for my wired connection. I'm willing to bet that the issue is the same for wireless. Here's what I found.
Issue:
During the installation, iTunes installs some network components related to mobile device support over ethernet(Apple Mobile Device Ethernet Service - netaapl.inf). At the same time, according the logs, the install process removed OEM18.inf. This almost exactly coincided with the time that I saw the network connection die (preceded it by a few seconds).
Basically, iTunes appears to be removing a required network component.
Resolution:
After installing iTunes and the network connection breaking, remove the network device from Device Manager and allow Windows to reinstall it automatically.
The following instructions are for Windows 7, but they are close enough to follow for other versions of Windows.
1. Click the Start button (Jewel in Vista and Win7).
2. Right-click Computer and click Manage in the menu that appears (type your password or click Yes if prompted).
3. On the left side of hte Computer Management window, click Device Manager.
4. Click the arrow (or plus sign) next to Network Adapters to expand that section.
5. Right-click your network adapter and click Uninstall in the menu that appears.
6. Click OK.
7. Reboot.
Windows should automatically detect and reinstall your network device on boot.

Similar Messages

Problem with ios 6 and cellular-network connection

Hi! I've youst updated my iphone 4 to ios 6 and now it cant't establish a connection to the cellular-network. Is there anybody who knows why and what to do? Thanks!

did you have nay luck with this? same happened to my wifes 4s. Apple reset it and the next day it lost cell service again.

Connection problems with idea pad and public network

My Lenovo Idea Pad connects fine at home on our ATT internet connectoin, but will not connect to a local public network at a local departent store. Anyone having suggestions email me at xxxxxxxxxxxxxx Thank you!\
Richard
Moderator note; e-mail address removed to stop the spambots getting it

I just saw your post and I resolved this on mine for my wired connection. I'm willing to bet that the issue is the same for wireless. Here's what I found.
Issue:
During the installation, iTunes installs some network components related to mobile device support over ethernet(Apple Mobile Device Ethernet Service - netaapl.inf). At the same time, according the logs, the install process removed OEM18.inf. This almost exactly coincided with the time that I saw the network connection die (preceded it by a few seconds).
Basically, iTunes appears to be removing a required network component.
Resolution:
After installing iTunes and the network connection breaking, remove the network device from Device Manager and allow Windows to reinstall it automatically.
The following instructions are for Windows 7, but they are close enough to follow for other versions of Windows.
1. Click the Start button (Jewel in Vista and Win7).
2. Right-click Computer and click Manage in the menu that appears (type your password or click Yes if prompted).
3. On the left side of hte Computer Management window, click Device Manager.
4. Click the arrow (or plus sign) next to Network Adapters to expand that section.
5. Right-click your network adapter and click Uninstall in the menu that appears.
6. Click OK.
7. Reboot.
Windows should automatically detect and reinstall your network device on boot.

Is there a problem with the itunes and quick time download pages or is it my internet.

Is there a problem with the itunes and quicktime download pages or is it just my internet.

Some more developments ... the issue appears to be browser-specific. I can't see the download controls at the moment in either IE 8 (I'll get your message) or Safari for Windows 5.0.5 (I'll just get the blank box). But I can see the download controls in Firefox 4 and Chrome (whatever version I have of that).
So it might be worth installing Firefox and seeing if you can get the downloads via that:
http://www.mozilla.com/en-US/firefox/new/

Problem with installing iTunes

So these are my problems with installing iTunes.
At first it was :
A required iTunes component is not installed.Please repair or reinstall iTunes (-45019)
Then it got worse as it would not even open and these would appear:
The program can't start because AVFoundationCF.dll is missing from your computer. Try reinstalling the program to fix this problem.
and this would appear:
iTunes was not installed correctly. Please reinstall iTunes.
Error 7 (Windows error 126)
I reinstalled maybe about 5 times or more...
If I thought I solved the above problem, this would appear:
iTunesHelper.exe is not installed on my computer.
I seen other people comment that you should unistall and restart the computer and install the setup again, but it does not work..
And others would say to repair the AAS or iTunes etc..
And after trying all these it does not work???
What else works?

I also tried repairing the Microsoft NET.

HT1222 I am trying to update my phone so I can save my info on my old phone & get a new phone, but I get a error that says "There was a problem with downloading teh software, the network connection timed out.." HELP! Not sure what my settings shoud be..

I am trying to update my phone so I can save my info on my old phone & get a new phone, but I get a error that says "There was a problem with downloading teh software, the network connection timed out.." HELP! Not sure what my settings shoud be...
I never updated anything until now...I want o update my iPhone to the newest version, but i do not want ot loose all that I have on this phone. I was told I needed to update the operating systems so i can put things into the cloud for transport to new phone, but I am just not sure how to do this..Can you help out here??

Dear Jody..jone5
Good for you that can't update your iphone because I did it and my iphone dosen't work for example I can't download any app like Wecaht or Twitter..
Goodluck
Atousa

I am having problems with installing Itunes 10.5 .With the windows installer

I am having problems with installing Itunes 10.5.It's the first time i dowload it,but every time het gives me an error message that a programm that was needed for installing didn't run.
What can i do???

When I attempt the download for Itunes 10.6, I get an immediate response of ""Files shared by these updates" has an invalid signature. The download has been removed."
That's suggesting that the AppleApplicationSupport.msi is getting damaged during the download via Apple Software Update for Windows.
Are you able to get the 10.6 update to go through if you use an iTunesSetup.exe (or iTunes64Setup.exe) installer file from the Apple Website?
http://www.apple.com/itunes/download/

I can not dowload the new updated software for my Ipod touch 4G. When i do I get an error message that says Network connection has timed out. I have done the trouble shooting steps. Downloaded the latest version of Itunes, and checked network connection

I can not dowload the new updated software for my Ipod touch 4G. When i do I get an error message that says Network connection has timed out. I have done the trouble shooting steps. Downloaded the latest version of Itunes, and checked network connection

Disabling the computer's antivirus and firewall during the download and update usually resolves the timeout error.

Help I am having problems with installing itunes on windows 7 64bit

I keep installing Itues but for some reason it will not sinc with my Ipad or iphone. Each time i do get it installed it tells me to delete and start over.
Help? with installing itunes on to windows 7 64 bit computer that will work with iphone and ipad...
thanks kevin

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if AAS won't install normally.
tt2

I have a windows 7 premium with the 64 bit driver and am having problems with installing itunes, i get an error message that states Apple Application Support is required to run itunes. i have tried 4 times to uninstall and reinstall with no success, help

I have a windows 7 premium laptop, 64 bit driver, have tried to install itunes but recieve an error when trying to open. Error states "Apple Application Support is required to run itunes. uninstall and reinstall again, error 2 (windows error 2). have tried this 4-5 times with no success. help!

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if AAS won't install normally.
tt2

Problems with SRW224G4 switch and Bridged Network Cards

Hello,
We have recently installed a SRW224G4 switch and have discovered that when we plug our DELL PowerEdge 2900 server into the switch, the switch loses all network connectivity and all of the LED's on the switch start flashing.
The server works perfectly well plugged into another switch, but as soon as we introduce the SRW224G4 into the network, either with the server plugged into that switch or any other, the problem re-occurs.
The only way we found we could eliminate this issue was if we disabled the Bridged Network connection on the two network cards on the server. If we do that, everything is fine, except the network performance of the server has dropped significantly.
The server is plugged into the 1GB ports on the switch, although we tried it on the 100MB ports and received the same problems. The switch reports that the ports are running at full-duplex.
Has anyone noticed this behavior before, and more importantly been able to rectify it.
Thanks in advance for your assistance,
Paul

I had this problem as well with any Linksys 2024 or rackmountable switch.. The trick is, you need to use the network cards management software to "team" or bridged the 2 NIC's otherwise the switch detects a loop and the whole thing locks up. So lame... Windows built in bridge mode stinks dont use it. When you use the Intel management software or Dell or HP's NIc management software you have the option to actually choose "redundant mode" where you can pick a Nic to be the primary, or you can choose Load Balancing where you can essentially double your throughput by joining the 2 nics.
In Windows 2008 Server, you actually do this by going to the Properties on the NIC in Device Manger. the software controls are now built right into the driver. pretty neat. 2003 you can check Device Manager the same way but not sure if it's the same as 2008, you might need to run the actual NIC management app.
Hope this helps
fdigi

Problem with Time Capsule and Wireless Printing (Mac+PC Mixed)

I have a time capsule that is the wireless router for the house and my iMac and laptops use the wireless network beautifully. I installed a Dell 1320C color laser printer by connecting it to the usb port on the time capsule. The airport express utility did NOT recognize any USB printer connected to the time capsule. I was however able to wireless print from my iMac by asking the printer utility to find all available printers which it did and then installing the printer drivers (thanks google). So, while i cannot find my printer as being connected to the time capsule through the airport utility, i can find it through the print utility as a connection through bonjour and i can print just fine to it.
Now i installed bonjour on my laptops and found and selected the 1320c just fine. When i try to print through the laptops (pc), nothing happens and the file stays in the print queue.
I am willing to live with the first quirk as I can print wirelessly from the iMac. I however need help to print from the laptops.
Any suggestions?
thank you so much in advance
Mukund

Mukund SRINIVASAN wrote:
Once I connect the printer via ethernet to the time capsule, how do I
1) see the printer on my iMAC - what utility do I run etc?
It is connected to your network. Check your printer setup manual on how to set it up. Or go the the Dell website for printer support if you can't find your manual.
2) can i then run bonjour from my windows laptops and see the printer through the network?
Via ethernet, it shouldn't need Bonjour to set up.

Problem with Time Capsule and wireless devices

Hi, I have a 1TB Time Capsuele 4th Gen. and it has been working since I got it, with only a few problems that were quickly resolved. However, it recently stopped allowing internet access to wireless devices. My home computer is connected on airport and actually does have internet access. However, my iPhone and MacBook, although they are recognizing the network and trying to connect, are being denied internet access. I have restarted everything multiple time, changed wireless details (network name and password) and nothing has worked. Anyone know how to fix this?

Start with a full factory reset and redo the setup again.. the full factory is important.
Universal Factory Reset.. any model TC or AE.
Unplug your TC/AE from power or turn off at the power point.
Hold in reset. and power the TC/AE back on.. all without releasing reset and keep holding in for about 10sec. (this is often difficult without a 2nd person or a 3rd arm).
Release it when the status light flashes rapidly. If it doesn’t flash rapidly you have missed it and try again.
Note..
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations of the router.
No files are deleted on the hard disk in a TC.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
No luck then it is faulty.. but it is gen3 or earlier.. all Gen4 TC were available with 2 or 3TB drives.. there is no 1TB Gen4. That makes it Gen3 and over 3 years old.

Problems with installing iTunes x64

Hello,
I was trying to install iTunes, but I didn't succeed.
I got the following error message:
An error occured during the installation of assembly
'microsoft.VC80.CTR,version="8.0.50727.4053",type=
"win32",publicKeyToken="qfc8b3b9a1e18e3b",process
or Architecture="x86". Please refer to Help and
Support for more information.HRESULT:0x80070424.
It has finished installation though, but doesnt work...

You did a good job with the error message, gum.
HRESULT: 0x800736FD
These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? Are they also 800736FDs, or a different error code? If they're different, what codes are you getting in Windows Update?

Problems with Installing Itunes 10.7 windows7 64bit

I've installed the new updated Itunes 10.7 but can't start it up.
An error message from startmeny appears saying that; it cannot access the element the shortcut is reffering to. You might not have accessing rights.
I've translatet the messagetext from norwegian, so it's probably not exact.
(In norwegian; Får ikke tilgang til elementet denne snarveien henviser til. Du har kanskje ikke tilgangsrettigheter.)
Does anyone else have this problem?

You did a good job with the error message, gum.
HRESULT: 0x800736FD
These ones are typically caused by underlying problems on the PC that also often cause Windows Updates to fail to install. If we can fix the Windows Update trouble, we can usually get the iTunes trouble cleaned up en passant.
Go into your Windows update and try to check for new updates. If updates install, stock up on the ones you're behind on, restarting the PC if requested to do so. After the restart, try installing iTunes again. Does it go through this time for you?
If windows updates fail to install, go into your Update History and doubleclick the failures. What alphanumeric codes appear for you? Are they also 800736FDs, or a different error code? If they're different, what codes are you getting in Windows Update?

Problems with Installing iTunes and wireless network connection

Similar Messages

Maybe you are looking for