Problems with installing my application that weights 360 Mb

I have already wait 28 hours and I still see Install Application page. Any ideas?
I export it in 10g EE and would like to import it to XE.
Best Regards, Kostya Proskudin!

I don't know why, but my application weight 360 Mb.
I use XE, without Apache.
Is it really possible to run export file in SQL *Plus? Does it need any parameters?
P.S. There is the application statistic:
-- Pages: 50
-- Items: 338
-- Computations: 1
-- Validations: 65
-- Processes: 133
-- Regions: 250
-- Buttons: 122
-- Shared Components
-- Breadcrumbs: 1
-- Entries 32
-- Items: 27
-- Computations: 0
-- Processes: 5
-- Parent Tabs: 7
-- Tab Sets: 7
-- Tabs: 16
-- NavBars: 4
-- Lists: 18
-- Shortcuts: 2
-- Themes: 18
-- Templates:
-- Page: 162
-- List: 254
-- Report: 126
-- Label: 90
-- Region: 383
-- Messages: 15
-- Build Options: 0

Similar Messages

Problems with 3D graph application redistribution

Hello wireworkers,
i wonder if
someone encountered problems with distribution of application that
uses 3D graph objects. I've created application that uses NI 3D graph
component and created installer with "Enable 3D graph support"
check box enabled. However after installing this application on the
windows machine without Labview two problems appeared: 1) "Error
loading control. A newer version needed. The default settings for the
control will be used." and after it 2) "You have 30 days to
evaluate the Measurement Studio ActivX control..." and something
like that. I don't get it. Why some newer version is required? and
what with that evaluation period?
Have any hints???
Thank you in advance and Merry
Christmas to everyone.
Alex
www.xinstruments.com
Custom Software for Industrial Automation
www.hdrconverter.com
Picture processing made easy

Hi Alex,
I tried the process you described on my machine using LabVIEW 7.1 and could not reproduce the behavior. If you can clarify the version you were using that will be helpful. I will have to clean a test machine and try it again without LabVIEW installed, and get back with you if the problem appears. In the meanwhile, I found the following KB which, while not referring to the exact same problem you are describing, does address the evaluation message issue. You can try to follow the steps at the end of the KB, and let me know if that worked.
http://digital.ni.com/public.nsf/websearch/1E1FB3C19E8E0A9986256F8D0077D0E6?OpenDocument
Regards,
Aluma G.
National Instruments

Problem on Installing the application

I have a problem with installing the application.
I developed an app and used Phonegap cloud service to build it for iOS, Android etc.
After the .ipa file was created, I used iTunes to install it.
The problem: the icon of the app on the device is darkened and it is stuck on 'installing'.
I tried several times and the result was the same.
Hope you can help me with that.
Thanks.

I have a problem with installing the application.
I developed an app and used Phonegap cloud service to build it for iOS, Android etc.
After the .ipa file was created, I used iTunes to install it.
The problem: the icon of the app on the device is darkened and it is stuck on 'installing'.
I tried several times and the result was the same.
Hope you can help me with that.
Thanks.

I have problems with installed applications

I have problems with installed applications, I used to work correctly, but yesterday it just stopped working all run which came by default. could tell me I have to do to eliminate this problem?

Try downloading another app - any free app is fine. See if that resets the other apps and allows them to work again.

Problem with installing and uninstalling applicati...

hi all,
I have a problem with installing or uninstalling apps on 808. When i try to install an application through Nokia suite or when trying to run the application file from the phone's memory the screen freezes and becomes unresponsive but the 3 phone buttons work just fine. I have to shut down the phone and the screen becomes responsive again. Anything available to help me wiith this situations as I cannot use any of the apps I have. Any help much appreciated.
Regards
Alex

You are not alone. Im also having the same issue because we do alot of install and uninstall apps. This is the bad point of symbian. But I tired to install the latest FP2 it will be slightly abit smoother now. So you have the latest version now but did you tired to restore any backup yet? It might be the setting on when you restore that affect it. The feezing should be shorten on FP2 but it will still remain there depending on the type of apps from what I experience.
I hope they will provide multiple function to uninstall apps since it will go through a long process to uninstall apps 1 by 1.
Reason is because some apps will go through process like preparing install, process install, finalising install which take away your control for that few seconds or a minute instead runnning in background mode. Its not convenient to uninstall more apps.

Problem with Installing Nokia Ovi Store in E51

I am having problem with installing nokia Ovi store in my E51. Whenever I try to download Ovi store from my E51, it shows a error message that the component is built in and cannot be installed. I dont know wat to do now. Can anyone please give me some advice. Thanks in advance.

Hi there!
This means that the Ovi Store is currently installed in your E52 phone, what I can suggest is try checking under Application Manager > Installed Application, check if the Ovi Store is there. If you can't see it, try to perform the soft reset (press *#7780# on the main screen of the phone and it will prompt you restore all original phone settings? phone will restart. Press YES and it will ask you for the lock code 12345.) If anything else please reply to this message.
Hope tis' Help!
"If you think this post is helpful, please click on the green button"

After installing an application that was created using the Application Builder

After installing an application that I created using the Application Builder I get this error if I try to run " ANY " LabVIEW App's that I have built. "Executable Version 7.1.1 doesn't match Resource File 7.1. Check your configuration."
The way that I tried to fix this is to reload LabVIEW 7.1 and DAQmx 8.0. I am using two NI-6528 switch cards.
After I reload LabVIEW and DAQmx I can run my applications but as soon as I install one on this development machine the error begins again.
The executable that I built works fine on the development machine and any other machine that I try it on but it appears that the Run-Time engine 7.1 becomes corrupt after I run setup.exe for the newly created application.
I have built numerous Installers, setup.exe's in the past without this error. Just this latest one caused this problem to start.
I can NOT upgrade to 7.1.1. I am doing work for many different sections of this factory and I can not force them to upgrade. I've asked. Others supply code for the same machines using LabVIEW 7.1.
I am stuck creating executables and manualing moving the correct files to the target machines.
What can be done?

No. The KB article was talking about a machine with 7.1.1 installed. I have LabVIEW 7.1 installed.
The machine that I am having trouble with is my development machine. LabVIEW 7.1, DAQmx 8.0.
If I build the executable all is fine. I can still run old executables including the one I just built.
If I create the installer all is fine. I can still run old executables including the one I just built.
When I install the app on my development machine the corruption occurs. I can " NOT " run old executables including the one I just built. The subject error pops up.
I have not moved any executables to the other machines yet. I don't want to corrupt others.

Problems with installing CS5 extended

Hi, I'm in the process of setting up a new computer and had no problems with installing Lightroom but installing photoshop CS5 is proving to be a real pain. At first it refused to install itself and after many hours of trying it finally did but then I found out I needed to update camera raw so I downloaded that but that one now is refusing to install itself. At first it told me the Applications manager needed to be updated so I did that and still it refuses to install itself. I have tried to get help from Adobe but not a single person is responding to my requests for help so I am now trying the forums so does anyone know what is going on with it?
Thanks!

Do a search on adobe's site for the specs of cs5 and make sure your system will support it. Also see if your OS is listed as being supported. It is possible that cs5 is too old for your system.
For now all we can do is guess. Maybe someone else will have an idea.

Problem with installing Elements - from noob

I have problems with installing Elements, it gives my an unknown mistake - I already have CS4 up and running, could this be the case?

Chances are not very good that pse 4 will run on os x 10 6.8 unless you were upgrading from an earlier mac version that already had pse 4 installed.
as per this:
http://forums.adobe.com/message/4474236#4474236

Problem with installing iTunes

So these are my problems with installing iTunes.
At first it was :
A required iTunes component is not installed.Please repair or reinstall iTunes (-45019)
Then it got worse as it would not even open and these would appear:
The program can't start because AVFoundationCF.dll is missing from your computer. Try reinstalling the program to fix this problem.
and this would appear:
iTunes was not installed correctly. Please reinstall iTunes.
Error 7 (Windows error 126)
I reinstalled maybe about 5 times or more...
If I thought I solved the above problem, this would appear:
iTunesHelper.exe is not installed on my computer.
I seen other people comment that you should unistall and restart the computer and install the setup again, but it does not work..
And others would say to repair the AAS or iTunes etc..
And after trying all these it does not work???
What else works?

I also tried repairing the Microsoft NET.

Problem with installing CUCM on MCS-7816-I5

Hi to all.
I have a problem with installing CUCM 8.6.1 on new MCS-7816-I5 (IBM) hardware. The problem is that installation loops in restart after upgrading MCS firmware. Actualy, installation does not sucessfully upgrade firmware, so every time it detects old firmware and trying to upgrade it.
I also tried update MCS firmware with downloaded Firmware Update Utility 3.6.5 CD from Cisco downloads, but it also fails.
Does anyone have idea what's going on? Is this a Cisco failure or IBM server failure?
Here is some details from log file generated with this Firmware Update Utility 3.6.5:
==============
Initial Selection
Machine Type: 4251 OS: SLES 10 Arch: 64 bit
IsPartition: 0
Update:   IBM System x uEFI update for x3200 M3 /3250 M3
Severity: Critical
Reboot:   Reboot Required to take effect
UpdateID: ibm_fw_uefi_gye142a_linux_32-64 Requisite:None
Version: 1.08 (GYE142A)
Install: 1.06 (GYE135A)
Select:    Yes
Update:   IBM Dynamic System Analysis
Severity: Recommended
Reboot:   Reboot Required to take effect
UpdateID: ibm_fw_dsa_3.20_dsyt75x_linux_32_64
Requisite:None
Version: 3.20 (DSYT75X)
Install: 3.01 (DSYT60K)
Select:    Yes
Update:   IBM Online SAS/SATA Hard Disk Drive Update Program
Severity: Critical
Reboot:   Not Required
UpdateID: ibm_fw_hdd_sas-1.08.01_linux_32-64
Requisite:None
Name:     WD2502ABYS-23B7A0 (/dev/sg0)
Version: 02.03B07
Install: 02.0
Select:    Yes
Update:   Integrated Management Module Update
Severity: Critical
Reboot:   Not Required
UpdateID: ibm_fw_imm_yuoo84c_linux_32-64 Requisite:None
Version: 1.22 (YUOO84C)
Install: 1.10 (YUOO57H)
Select:    Yes
IBM Command Line IMM Flash Update Utility v1.05.03 Licensed Materials - Property of IBM
(C) Copyright IBM Corp. 2009,2010 All Rights Reserved.
LAN-over-USB device not configured.
Error connecting to IMM using IP address 169.254.95.118.
Please verify the LAN over USB interface is configured properly and active.
Error flashing firmware: 3
IBM Command Line IMM Flash Update Utility v1.10.11 Licensed Materials - Property of IBM
(C) Copyright IBM Corp. 2009,2010 All Rights Reserved.
Refreshing LAN-over-USB IP address. This may take several minutes.
Attempting to discover the IMM(s) via SLP.
Error connecting to IMM using IP address 169.254.95.118.
Please verify the LAN over USB interface is configured properly and active.
Error flashing firmware: 10
(C) Copyright IBM Corp.2010. All Rights Reserved.
FdrvWL -- Flash Drive(s)                                     3.10.08.19
   1 Ada:0 SID:0   PN:44E9172:42C0463 SN:1J242783 FW:02.03B07              T:13 FW:Ok
AdaNbr(Type)      DevFnd Flashed(SAS SATA) NbrFailed
0(onBoard)           1       0   0    0          0
                       1       0   0    0          0 Error(s)
Update completed successfully. <-- THIS SUCCESS, BUT EVERY TIME IT UPGRADEING AGAIN FROM OLD VERSION, LIKE NEVER REALY UPGRADED TO NEWER VERSION
IBM Command Line IMM Flash Update Utility v1.10.11 Licensed Materials - Property of IBM
(C) Copyright IBM Corp. 2009,2010 All Rights Reserved.
Refreshing LAN-over-USB IP address. This may take several minutes.
Attempting to discover the IMM(s) via SLP.
Error connecting to IMM using IP address 169.254.95.118.
Please verify the LAN over USB interface is configured properly and active.
Error flashing firmware: 10
===========================
Thanks,
Sinisa.

Hi Sinisa,
It almost sounds like this bug;
CSCtn81201
Incorrect "Hardware Configuration Error" due to hardware setup errors
Symptom:
Refresh upgrade stops with IMM device detection, and then server being reported as unsupported
Conditions:
in-band USB interface was disabled, which is configurable via IBM system X or IMM (browser) interfaces.
Workaround:
change the in-band usb interface settings to enabled.
Related Bug
Status
Fixed
Severity
4 - minor
Last Modified
Aug 17,2011
Product
Cisco Unified Communications Manager (CallManager)
Platform
Dependent
Technology
nav
1st Found-in
8.6(0.99081.3)
Fixed-in
8.6(1.96000.1), 9.0(0.95070.38), 9.0(0.95070.39), 8.6(1.99989.1), 8.6(1.95050.1), 9.0(0.96000.1), 8.6(1.97011.2), 8.6(1.95190.40), 8.6(1.97011.1), 8.6(0.95180.9), 9.0(0.95010.1), 8.6(1.95020.1), 8.6(1.95040.1), 8.6(0.98000.50), 8.6(0.98000.17), 8.6(0.99981.2), 8.6(1.10000.1), 8.6(1.99986.1), 8.6(1.95020.58), 8.6(1.96000.51), 8.6(1.10000.43)
Cheers!
Rob

Severe problem with installing and starting Audio-DVD Pla

Hi,
after installing the new drivers (SBAX_PCDRV_LB_2_8_000.exe) for my Audigy2ZS in XP SP3 i had np mic boost and the mixer did not show the mic as an selectable source. So i rolled back to my old drivers and after that i have problems with installing and starting the Audio DVD Player. I tried so far: uninstalling everything like its said solution ID 72, checking HD for corrupted files and i did a repair installation of XP. Nothing helped. When i only install the drivers and the DVD Audio Player from the original CD everything is fine until the reboot adter installation. When the OS tries to start the "chkcolor.exe" the PC instantly reboots. When preventing XP from doing so, there is no reboot, but as soon i want to start the DVD Audio Player a reboot occurs again. When i try to uninstall the DVD Audio Player before unstillaing the drivers, the is also a reboot. First uninstalling the drivers and then the DVD Audio Player, there is no reboot.
Any ideas?
Best regards and thank in advance,
PicknatariMessage Edited by Picknatari on 07-20-2008 07:3 PM

Hi,
after installing the new drivers (SBAX_PCDRV_LB_2_8_000.exe) for my Audigy2ZS in XP SP3 i had np mic boost and the mixer did not show the mic as an selectable source. So i rolled back to my old drivers and after that i have problems with installing and starting the Audio DVD Player. I tried so far: uninstalling everything like its said solution ID 72, checking HD for corrupted files and i did a repair installation of XP. Nothing helped. When i only install the drivers and the DVD Audio Player from the original CD everything is fine until the reboot adter installation. When the OS tries to start the "chkcolor.exe" the PC instantly reboots. When preventing XP from doing so, there is no reboot, but as soon i want to start the DVD Audio Player a reboot occurs again. When i try to uninstall the DVD Audio Player before unstillaing the drivers, the is also a reboot. First uninstalling the drivers and then the DVD Audio Player, there is no reboot.
Any ideas?
Best regards and thank in advance,
PicknatariMessage Edited by Picknatari on 07-20-2008 07:3 PM

I am having problems with the Preview application. When I try to use it to open a pdf document it gets hung-up and I have to select force quit to close it. Any ideas on how to resolve this problem? Thanks for any help

I am having problems with the Preview application. When I try to use it to open a pdf document it gets hung-up and I have to select force quit to close it. Any ideas on how to resolve this problem? Thanks for any help

Can you open the Preview program without loading a file, like by itself?
If it doesn't load then I suspect a corrupt Preview preference file.
Deleting the System Preference or other .plist file
Can you open other files with Preview, like jpg's and images?
How about other PDFs? or is it just that one you have downloaded?
Run through this list of fixes
Step by Step to fix your Mac

How to fix a problem with my book pro that has a gray screen with a folder with a question mark on it

does any one know how to fix a problem with my book pro that has a gray screen with a folder with a question mark on it?

Hello Mokhtary123 and welcome to Apple Support Communities,
It will help us diagnose your problem to know the exact model, size, year built, RAM installed and OS you're running.
But basically your system can't find the boot disk. Usually this is a symptom of a dead/dying/corrupted hard drive;
A flashing question mark or globe appears when you start your Mac - Apple Support
OS X Recovery
http://support.apple.com/en-us/HT4718

Problems with installing HP OfficeJet Pro L7590 driver All-in-One

Hello HP team.
Having problem with installing driver for HP Officejet pro L7590.
Starting the process the process bar goes to the end 100% and then disappear.
After that nothing happens.
Rebooting doesn't help.
Windows 7-64

Thanks for getting back to me!
Lets try some more steps:
Uninstall, level 3 for HP PC or level 4 for non-HP PC.
1. Click Start and type %temp% in the run field and click OK.
2. Look for, and open the folder starting with 7z (Example: 7zS2356) (if there is more than one 7z folder, try the most recent one)
3. Open folder Util
4. Open folder CCC
5. Run the uninstall_ L4.bat for a non-HP PC or run the Uninstall_L3.bat for a HP PC
6. When the uninstall has completed restart the computer
Try to install again using the HP Printer Install Wizard for Windows
Let me know how this goes please
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Problems with installing my application that weights 360 Mb

Similar Messages

Maybe you are looking for