Problems with installing Oracle Developer Suite

Hi,
I am trying to install the Oracle Developer Suite, and I get a message error saying that my swap space is not enough for ODS installation. How fix it?
ThankX
Sávio

You need at least 512 MB of internal memory for Developer. If you have this, then you will need to add swap space. This is done at the operating system level, not by Forms. Search the Internet for your operating system and you will find out how to do this.

Similar Messages

Problems installing Oracle Developer Suite 10g in windows 7

Hi Experts;
I have installed Oracle Developer Suite 10g in windows XP, but now I change to windows 7, 64 bits, I was trying to install this product and I'm having a lot of problems, apparently this product is not compatible with windows 7.
My question is, is there any product, like Oracle Developer Suite 10g for windows 7? I was looking for in the Oracle page, and I couldn't see anything, may be the name is diferent.
Thanks for your help.
Al

First off, Oracle Developer Suite (ODS) 10g is no longer supported so Oracle has discontinued improving the product. While ODS is not certified by Oracle for use on Windows 7 (32 or 64 bit), you can install and use on Windows 7 (32/64 bit). This is a commonly asked question so a search of the forum would have given you several solutions.
The limitations of the Oracle installer are:
1. You must have Administrator rights to install.
2. Windows 7 is not a supported version (it's version 6 and it is looking for version 5), so the installer exits.
3. It's unable to recognize Windows Managed virtual memory.
To get around these limitations you must do the following:
1. Modify your Virtual Memory settings and define a specific Min and Max amount. Look at this MS article if you need help making this change: http://windows.microsoft.com/en-us/windows7/change-the-size-of-virtual-memory
2. You must run the Oracle installer in compatibility mode for Windows XP. To do this,
- Right-click on the setup.exe and select the Compatibility tab and click "Run this program in compatibility mode for: Windows XP SP2"
3. While still in the properties and the compatibility tab, select the option, "Run as Administrator" and click OK.
Now run the Oracle setup.exe and your installation should succeed.
Craig...

I have a problem when installing the Developer Suite

Hello,
I'm new to Oracle and I'm having a problem when installing the Developer Suite 10g. I have the Oracle Database 11g installed, but when I try to istall the developer, it gives me this error: "Oracle Developer Suite 10g cannot be installed into an existing Oracle9i 9.2.0.1.0 oe higher Oracle Home", Although I have installed the same thing twice before and it was working.
Please help me with this :(

Hi user;
I'm new to Oracle and I'm having a problem when installing the Developer Suite 10g. I have the Oracle Database 11g installed, but when I try to istall the developer, it gives me this error: "Oracle Developer Suite 10g cannot be installed into an existing Oracle9i 9.2.0.1.0 oe higher Oracle Home", Although I have installed the same thing twice before and it was working.What is your OS? If you are linux-unix level you are making installation wiht same user of Oracle Db11g? Did you try to create new Oracle_home and set it before start installation?
Regard
Helios

How to install Oracle Developer Suite 10g on Windows 7 (64-bit)

Hi,
I have windows 7 (64-bit) installed on my laptop. I want to install Oracle developer suite 10g R2 on this machine but when I run the Oracle Universal Installer, it gives me error stating "operating system version: must be 5.0, 5.1, 5.2. Actual 6.1 Failed<<<<
Exiting OUI.
Can anyone please help me to solve this problem.
Thanks in advance.
Regards

Be aware that Developer Suite 10gR2 is not supported for use on Windows 7. Installing it on this platform may result in undesirable behavior.

Want to install Oracle Developer Suite 10g R2 on Windows 7 (64-bit)

Hi,
I have windows 7 (64-bit) installed on my laptop. I want to install Oracle developer suite 10g R2 on this machine but when I run the Oracle Universal Installer, it gives me error stating "operating system version: must be 5.0, 5.1, 5.2. Actual 6.1 Failed<<<<
Exiting OUI.
Can anyone please help me to solve this problem.
Thanks in advance.
Regards

Developer Suite 10 is not certified or supported to be installed on Win7 (64bit). Although it can be done, you will have problems later if you manage to get it installed. If you really want to have it on your Win7 laptop, I encourage you to install "Windows XP Mode", which is part of Windows Virtual PC. This is free to licensed Win7 users (does not apply to Home edition). Refer to the following:
http://windows.microsoft.com/en-US/windows7/install-and-use-windows-xp-mode-in-windows-7

How to install Oracle Developer Suite 8 on windows 8 64bit

Hi, everyone.
I have facing problem. How to install Oracle Developer Suite 10g on windows 8. Please send me step by step install.
Thanks
Mbulur.

No version of Forms/Reports is currently supported on Windows 8. Also, because Error Correction support for versions older than 11 have ended, no new certifications will be provided for those versions. I would recommend you consider upgrading to Forms/Reports 11.1.2.1 as we are hoping for Win8 certifications in the future for this version.

Unable to install Oracle Developer Suite 10g on Windows 7

Hello,
I'm getting the following error message when using OUI on the Specify File Locations screen after providing source and destination:
Invalid staging area. There are no top level components for Windows NT, Windows 2000 available for installation in this staging area.
Anyone else have this happen while trying to install? I see that a few people have been successful in getting it installed. The destination was provided by default as C:\Program Files\Oracle\Inventory.
Any help would be appreciated - thanks in advance.

The Oracle Developer Suite (ODS) 10g is now certified by Oracle for installation on Windows 7 (32-bit). For installation steps, I recommend you take a look at My Oracle Support article: *How to Install Oracle Developer Suite 10g (10.1.2) on Windows 7 (32-bit) [ID 1292919.1]*. There is no need to run the XP-Mode (Virtual PC) of Windows 7 in order to install and use ODS on Windows 7.
Invalid staging area. There are no top level components for Windows NT, Windows 2000 available for installation in this staging area.This error could be caused by many things. I've seen two. The first (as I recall) was caused by an issue with one of the files in the Inventory directory. We were able to get around the issue by deleting a file (I'm sorry, but I don't recall which file or if we simply deleted the directory). I recommend you check with Oracle Support before you delete any files or the directory, however.
The other issue I've seen cause this is "spaces" in the directory path to the installer. This was the most common cause that I've seen. Make sure there are no spaces in the directory path where the installer is located.
Hope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.

Installing oracle developer suite under a different oracle home than the DB

I have Oracle 10g r2 installed on a RHAS4 server.
I installed Oracle developer suite 10.1 on this server. In the installation procedures, there are specific instructions to not install it under the ORACLE_HOME for an existing database installation.
Oracle was already installed under /usr/lib/oracle (don't ask me why, I didn't do it).
I installed oracle developer suite under /oracle/dev. If I set ORACLE_HOME to /usr/lib/oracle, proc responds with:
Symbol `kpccapCTarr' has different size in shared object, consider re-linking
PCC-F-NOERRFILE, unable to open error message file, facility PR2
If I set ORACLE_HOME to /oracle/dev, it works correctly.
This appears to require me to switch my oracle home setting each time I switch between using Pro*C and sqlplus. This in very inconvenient. I have worked on many, many systems in the past which had one ORACLE_HOME for both the RDBMS and the development tools.
Is this a new constraint introduced by Oracle? Where does this restriction come from?
Is there something I don't understand and have I installed the developer suite incorrectly?

your 10.2 server uses obviously some different client libraries than your 10,1 developer version.
You may check this with ldd proc and ldd sqlplus.
Perhaps you can live with a wrapper script for starting sqlplus or proc meanwhile ?

Is it possible to install oracle developer suite 10g in windows 7(64 bit), I have tried to install but failed so. Though, database 11g gets install in Windows 7. If possible, Kindly provide me the website link.

Is it possible to install oracle developer suite 10g in windows 7(64 bit), I have tried to install but failed so. Though, database 11g gets install in Windows 7.
If possible, Kindly provide me the website link.

Pl do not post duplicates
Is 1GB ram is enough for the installation of oracle developer suite 10g and database 11g??? And which one to install fi…
I want to install oracle database 11g and oracle developer suite 10g (latest) in my system. As i'm quite new to oracle ,…
Continue the discussions in your original threads

Install oracle developer suite 10g on ubuntu

Hi,
Is it possible to install oracle developer suite 10g on ubuntu?

979155 wrote:
Hi,
Is it possible to install oracle developer suite 10g on ubuntu?Better search at ubuntu forum.
Here one link
1. http://ubuntuforums.org/showthread.php?t=548631
2. http://ubuntuforums.org/showthread.php?t=1393013
3. {thread:id=2432469} {thread:id=669088}
Hope this enough...
Hamid

How can i install oracle developer suite 10g on centos 5.5

Hello all ,
i would like to install oracle developer suite 10g on centos 5.5
Thank's all :)

CentOS is not a supported distro for installing Dev Suite 10g - http://www.oracle.com/technetwork/middleware/ias/downloads/as-certification-r2-101202-095871.html
Unless you use a certified OS, you are on your own
HTH
Srini

Error on installing Oracle Developer Suite 10g (10.1.2.0.2)

I try to install:
Oracle Developer Suite 10g (10.1.2.0.2), and lick on the set up icon. Then
I get error message:
"Actuall checking SWAP space: 1440 MB availabe, 1535 MB required... Failed "
I don't understand what is meant, and how to fix it?
I have C:\ dirve free space 11.1GB, and G:\ drive free space 463 GB. I try to install the package in G: dirve. I use MS Window XP.
Thank you
Alex

Alex-
Increase your Windows paging file by going to Control Panel->System->Advanced(tab)->Performance Settings(button)->Advanced(tab)->Virtual Memory. Change the Initial size to be at least 1535MB.
Dan

Installed Oracle Developer Suite 10g (9.0.4) in Linux

my system is Linux enterprise 3, update 5 (Kernel 2.4.21-32.ELsmp)
I haved Installed Oracle Developer Suite 10g (9.0.4) by using instruction in Oracle9i Developer Suite Installation for RedHat Install successful.
when I run form builder (oracle_home/bin/f90desm.sh, rwbuilder), it show that:
Segmentation fault
Please help!

And how to set RHEL 3 to allow install Oracle
Developer Suite 10g (9.0.4.0.0)?Main documentation link:
http://www.oracle.com/technology/documentation/index.html
Under Development Tools, click Oracle Developer Suite Release 10g (9.0.4), then View Library (Documentation Library for Windows, Linux, Solaris, and HP-UX). The Tab Getting Started has Install guides.

Installing Oracle Developer Suite Error

HI I am a first time user of Oracle, I have installed the Oracle Database Server and Client 9.2.0.1.0 and now i am trying to install Oracle Developer Suite but I get an error saying Oracel9iAS cannot be installed into an existing Oracle9i 9.2.0.1.0 or Higher Oracle Home I got the CD's from school in the Oracle book i purchased. Can anyone help me how to get it installed on my home computer?
Thank you

Alex-
Increase your Windows paging file by going to Control Panel->System->Advanced(tab)->Performance Settings(button)->Advanced(tab)->Virtual Memory. Change the Initial size to be at least 1535MB.
Dan

How install Oracle Developer Suite 10g for Linux (Including Forms & Reports

hi
i want to install Forms & Reports Developer Suite in Linux OS So i have downloaded From OTN Site
"Oracle Developer Suite 10g for Linux (Including Forms & Reports)"
These are the File's i have Downloaded:
as_linux_x86_ids_101202_disk1.cpio
as_linux_x86_ids_101202_disk2.cpio
so in the Oracle Documentation Site they have given Guide as Follows:
$cpio -idmv < as_linux_x86_ids_101202_disk1.cpio
$cpio -idmv < as_linux_x86_ids_101202_disk2.cpio
after that what should i do ...
How to Install Oracle Developer Suite 10g for Linux (Including Forms & Reports)
Kindly Reply ASAP

Pl follow the steps in the Install Guide - http://download.oracle.com/docs/cd/B19375_02/doc/frs/install/B19314_02/toc.htm
Srini

Problems with installing Oracle Developer Suite

Similar Messages

Maybe you are looking for