Problems with Instant Messaging v6.1 configure
Hi,
When I exec IM's configure program on our Solaris 8 system
ldapmodify fails:
Adding IM and Presence services LDAP schema
Failed to add IM and presence schema - error 137
ld.so.1:/usr/bin/ldapmodify: fatal: libsasl.so failed: No such file or directory.
libsasl.so is present in /usr/lib/mps
TIA
Shaun McCullagh
marviQ
Amsterdam
I'm not sure what the answer is. I'd be curious what the
following shows:
% grep ldapmodify /var/sadm/install/contents
..and..
% ldd /usr/bin/ldapmodify
Also, for good measure:
% pkgparam -v SUNWlldap
Similar Messages
-
Problem with instant message in clustered environment
Hello, I have some problem with Instant Message service.
We need to use it in our Production Environment (a clustered emvironment with a central instance, two dialog instances and two web dispatchers), some months ago we tested it in Development Environment (not clustered emvironment, just a single system) and it worked fine.
So I did the same configurations on Production Environment but it did not work.
But if I access on my portal (Production Env.) by the central instance (avoiding the dispatchers) the instant message service works.
I think it can be a web dispatcher's configuration problem, in its logs I found the message :
"<i>[Thr 3700] *** ERROR => htmlEncode: called with empty string [icpif.cpp 847]</i>"
I' ve repeated the same configuration done in Dev.Env. (no dispatcher) on the Prod.Env. (with 2 dispatcher), is possible that I'm missing some configurations??
Could someone helps me?
Best Regard
nullHi Alessandro,
unfortunately I got the same problem but I haven't found the solution yet.
Hoping someone will help us.
Regards Nicola -
Problem with Instant Messaging
Suddenly today while I was chatting (IM) on Skype with friends I wasn't able to send them anymore IMs. I don't have a problem to send IMs to the rest of the friends in my contact list, which were not active at the moment when my troubles started. I sign out and in few times, restarted my laptop, uninstalled and installed again Skype. Nothing worked! Please, somebody tell me is it a Skype software problem, or what? Thank you in advance!
milla68Yes, all of that I have done....And still not giving me any alerts notifying me of a new IM....Is it because my wife's cell phone and MY cell phone are on the same account? We have different cell phone numbers so that shouldnt matter, I would think....
-
Problem with Nokia Messaging on my N97 (V22)
Since afew weeks I have a strange problem with Nokia Messaging on my N97.
I receive emails using Nokia Messaging (V10.2.26) with a date shown incorrect as 01.01.0000 and the email then can’t be opened/read.
This happens either on 3G connection as well as WLAN and it seems to be by random, not only HTML-emails or emails with text only.
I have uninstalled Nokia messaging already and reinstalled V10.1.24 but the problem still remains.
Is there any idea how to fix this issue because it is quite annoying and I can’t use the full functionality of my cell phone?millic wrote:
ceroberts75, I remember from your other posts somehow server thinks you already have an account with the email you are trying to configure and you/nokia support is not able to get access to it. Different people have resolved this issue in different ways. For me it was just another way. Thought it might help someone.
absolutely m8. thats why i gave you a kudos.
the challenge is that NM has been unruly as of late...and believe when i say that i have literally been on the phone teching nokias support up to tier 2 and creating, canceling, trying new acounts with different email, different ways of creating them, with wifi, gprs...and praying for hours accross mutliple phone calls
but to no avail, are the devices we are using connecting and syncing...even with thier n900 specialist which i had to help him! lmao.
another option for a solution is alwayhs welcome as there are more then one way to skin a cat.
i hope it works for him and others as i kno9w thesome that are just giving up on it. -
I have two Iphones 5 with different email addresses sharing one Apple ID account.Both are using IOS 8.
I would like to set up a new Apple Id for one of the phones and remove it from the old account.
If I do that, can I move all of the purchased apps and songs to the new Apple account?
Also, will sharing one Apple ID account with two devices cause problems with using messaging and FaceTime?Sharing an iCloud account between two devices can be done without causing issues with iMessage and FaceTime, just go into Settings for each of these functions and designate separate points of contact (i.e. phone number only, or phone number and unique email address). While that works, you'll then face the problem where a phone call to one iPhone will ring both if on the same Wi-Fi network -- but again, that can be avoided by changing each phone's settings.
Rather than do all that, don't fight it -- use separate IDs for iCloud. You can still use a common ID for iTunes purchases (the ID for purchases and iCloud do not have to be the same) or you can use Family Sharing to share purchases from a primary Apple account. -
when i attempt to open Firefox Mail, I get a popup (yellow background) with the heading "There is a problem with this message". We are sorry, but Yahoo Mail has encountered a temporary problem, referring to Temporary Error 4. It goes on to suggest that I might solve the problem by going to Yahoo Help Page. I tried this to no avail. Can you help? Please keep it simple as I am sort of computer impaired. Thanks, Bob Mayfield
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
*https://support.mozilla.org/kb/clear-cache-history-and-personal-information -
I keep having the same problem with my messages over and over again. My number is not checked in my message settings it just unchecks itself
Dear Tomarshe
I had the same problem a couple of weeks back.
What I did was that I restarted that Ipad of mine and voila!
Problem solved!
hope this helped!
- DASHdotDASHdot -
Does anyone have problems with sent messages not showing in their Mail? I have two sent folders when really I only want one. Any tips?
Not sure if this is a fix, but I tried sending myself a test email from only the Bcc field, and lo and behold it now shows the Bcc field in all sent item previews;
...maybe leaving the 'To' field blank on purpose forced Mail to show it.
Rebooted the Mail program, still there - rebooted the machine, still there. Hope this is still relevant and it works for you too - J. -
Having problems with a message saying,A script in this movie is causing adobe flash player to run slowly if it continues to run, your computer may become unresponsive. Do you want to abort script. And my system seems to freeze. What can I do
Here is the download page for Click-to-PlugIn:
http://hoyois.github.com/safariextensions/clicktoplugin/ -
WLS 7.0 sp2 - Servlet Problems with SOAP messages
I'm using Weblogic 7.0 SP2 and trying to create a Servlet to receive SOAP wrapped
XML messages. I'm getting the following error. Is this a problem with WLS7.0sp2's
support of JAXM? The System.out.println's indicate I have successfully received
the incoming SOAP request and then successfully formatted the SOAP response, but
upon returning saving the response it appears to blow up. Does anyone have any
suggestions?
I need to do the following in a servlet:
- receive an incoming SOAP request with an embedded XML message
- perform some processing
- return a SOAP response with an embedded XML message
Should I be using JAXM? Or can I do this same task easily with JAX-RPC?
<Feb 24, 2004 4:10:42 PM AST> <Error> <HTTP> <101017> <[ServletContext(id=260434
7,name=isd.war,context-path=)] Root cause of ServletException
java.lang.Error: NYI
at weblogic.webservice.core.soap.SOAPMessageImpl.saveRequired(SOAPMessag
eImpl.java:360)
at javax.xml.messaging.JAXMServlet.doPost(Unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run
(ServletStubImpl.java:1058)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
pl.java:401)
at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubIm
pl.java:306)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationActio
n.run(WebAppServletContext.java:5445)
at weblogic.security.service.SecurityServiceManager.runAs(SecurityServic
eManager.java:780)
at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppSe
rvletContext.java:3105)
at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestIm
pl.java:2588)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:213)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:189)
>
I've stripped the code down so that all it does is verifies the incoming SOAP/XML
request and creates a hard-coded response... be gentle... I'm a novice at this
import javax.xml.soap.*;
import javax.servlet.*;
import javax.servlet.http.*;
// import javax.xml.transform.*;
import java.util.*;
import java.io.*;
public class RegisterServlet extends HttpServlet
static MessageFactory fac = null;
static
try
fac = MessageFactory.newInstance();
catch (Exception ex)
ex.printStackTrace();
public void init(ServletConfig servletConfig) throws ServletException
super.init(servletConfig);
public void doPost(HttpServletRequest req, HttpServletResponse resp) throws ServletException,
IOException
try
System.out.println("** Note: doPost() Entering req = " + req);
// Get all the headers from the HTTP request
MimeHeaders headers = getHeaders(req);
// Get the body of the HTTP request
InputStream is = req.getInputStream();
// Now internalize the contents of a HTTP request
// and create a SOAPMessage
SOAPMessage msg = fac.createMessage(headers, is);
System.out.println("** Note: doPost() Step A");
SOAPMessage reply = null;
reply = onMessage(msg);
System.out.println("** Note: doPost() Step B reply = " + reply);
if (reply != null)
* Need to call saveChanges because we're
* going to use the MimeHeaders to set HTTP
* response information. These MimeHeaders
* are generated as part of the save.
if (reply.saveRequired())
System.out.println("** Note: doPost() Step C reply.saveRequired()");
reply.saveChanges();
resp.setStatus(HttpServletResponse.SC_OK);
putHeaders(reply.getMimeHeaders(), resp);
// Write out the message on the response stream
OutputStream os = resp.getOutputStream();
System.out.println("** Note: doPost() Step D os = " + os);
reply.writeTo(os);
os.flush();
else
resp.setStatus(HttpServletResponse.SC_NO_CONTENT);
catch (Exception ex)
throw new ServletException("** Error: SAAJ POST failed: " + ex.getMessage());
static MimeHeaders getHeaders(HttpServletRequest req)
Enumeration enum = req.getHeaderNames();
MimeHeaders headers = new MimeHeaders();
while (enum.hasMoreElements())
String headerName = (String)enum.nextElement();
String headerValue = req.getHeader(headerName);
StringTokenizer values =
new StringTokenizer(headerValue, ",");
while (values.hasMoreTokens())
headers.addHeader(headerName,
values.nextToken().trim());
return headers;
static void putHeaders(MimeHeaders headers, HttpServletResponse res)
Iterator it = headers.getAllHeaders();
while (it.hasNext())
MimeHeader header = (MimeHeader)it.next();
String[] values = headers.getHeader(header.getName());
if (values.length == 1)
res.setHeader(header.getName(),
header.getValue());
else
StringBuffer concat = new StringBuffer();
int i = 0;
while (i < values.length)
if (i != 0)
concat.append(',');
concat.append(values[i++]);
res.setHeader(header.getName(), concat.toString());
// This is the application code for handling the message.
public SOAPMessage onMessage(SOAPMessage message)
SOAPMessage replymsg = null;
try
System.out.println("** Note: OnMessage() Entering msg = " + message);
//Extract the ComputerPart element from request message and add to reply SOAP
message.
SOAPEnvelope reqse = message.getSOAPPart().getEnvelope();
SOAPBody reqsb = reqse.getBody();
//System.out.println("** Note: OnMessage() Step B");
System.out.println("** Note: OnMessage () Step A Soap Request Message Body = "
+ reqsb);
//Create a reply mesage from the msgFactory of JAXMServlet
System.out.println("** Note: OnMessage () Step B");
replymsg = fac.createMessage();
SOAPPart sp = replymsg.getSOAPPart();
SOAPEnvelope se = sp.getEnvelope();
SOAPBody sb = se.getBody();
System.out.println("** Note: OnMessage () Step C Soap Reply Before Message Body
= " + sb);
se.getBody().addBodyElement(se.createName("RegisterResponse")).addChildElement(se.createName("ErrorCode")).addTextNode("000");
System.out.println("** Note: OnMessage () Step D Soap Reply After Message Body
= " + sb);
replymsg.saveChanges();
System.out.println("** Note: OnMessage() Exiting replymsg = " + (replymsg));
catch (Exception ex)
ex.printStackTrace();
return replymsg;
Michael,
I got the same error on WLS8.1/Win2K professional and apache FOP (old version).
After digging into the WLS code and FOP(old version). i found the conflict happens
on
the "org.xml.sax.parser" system property. In WLS code, they hard coded like the
following when startup weblogic server:
System.setProperty("org.xml.sax.parser", "weblogic.xml.jaxp.RegistryParser");
But the FOP code try to use the "org.xml.sax.parser" system property to find the
sax parser then conlict happens.
Here is the response from BEA support :
"I consulted with our developers regarding the question of whether we can change
the hard-coded value for the java system property: org.xml.sax.parser by using
a configuration parameter and I found that unfortunately there is no specific
setting to change the value. As you had mentioned in your note the org.xml.sax.parser
system property can be changed programmatically in your application code."
I solve my problem by using newer apache FOP (it never use the system property:org.xml.sax.parser
any more) and XML Registy for WLS8.1.
Good luck.
David Liu
Point2 Technologies Inc.
"p_michael" <[email protected]> wrote:
>
Help.
When we migrated from WLS 6.1 to WLS 7.0 SP2 when encountered a problem
with XML
parsing that did not previously exist.
We get the error "weblogic.xml.jaxp.RegistryParser is not a SAX driver".
What does this mean? And, what should we do about it.
p_michael -
Problems whit Instant messaging 8.2 and SSL
Im trying to configure a instant messaging 8.2 whit ssl but when I restart the IM the mux start whitout ssl
I dont have idea what is the problem whit the configuration and I dont know if Instant messaging 8.2 support ssl
I use the same cert database that I used for the application server and smtp
Can I configure ssl only for the Mux and not for the server?
this is the configuration in the iim.conf for the mux
iim_mux.usessl=on
iim_mux.secconfigdir=/opt/sun/comms/im/config (I also tried this parameter whit the value /etc/opt/SUNWiim/default/config but it not work)
!iim_mux.keydbprefix=https-example.com-www-
!iim_mux.certdbprefix=https-example.com-www-
iim_mux.secmodfile=secmod.db
iim_mux.certnickname=portal.example.com
iim_mux.keystorepasswordfile=/opt/sun/comms/im/config/sslpassword.conf (I also tried whit the value "sslpassword.conf" )
Edited by: user9979971 on Jun 30, 2011 9:32 AMInstant Messaging 7.3+ no longer supports SSL through the Multiplexor using NSS-based certificates,however you can now migrate the existing certificates from NSS store to JKS using the migratecert utility migratecert.Alternatively you can enable TLS on server which provides end to end encryption
HTH,
Swetha -
Problem accessing Instant Messaging
hi,
I have been trying to access the Instant messaging module with no success. Jabber server is setup successfully and the connectivity to the server is also fine. I have copied Jabberbeans.jar version 0.9.0-pre4 to <Oracle Home>/wireless/lib but the error shown on accessing it is: 'The required jabber jar file is not present on the server.'
PLEASE HELP !!
Regards
ShivHi.
I was able to get the IM application running and to log on but there is not much action.
Putting the jabberbeans.jar in the asroot/wireless/lib directory will make the IM application work. Don't forget to restart your wireless server.
Starting the IM application you will be asked to log on. To do so I've used my MSN messenger password. I can create a group and set the status but how can I be sure that I am connected to the MSN messenger service?
So...I've applied the following settings:
REPLACE_URL
FORM_METHOD
INPUT_ENCODING
Determines whether the service uses an HTTP proxy to access the Jabber Server.
The host name of the HTTP proxy, if any, used to connect to the Jabber Server.
The port number of the HTTP proxy, if any, used to connect to the Jabber Server.
The host name of the machine on which the Jabber Server is configured.
- jabber.org.uk
The name of the user directory service configured on the Jabber Server accessed by the service.
- username MSN (?)
The initial group name to assign to users acquired through the Yahoo! transport, if any.
- MSN (?)
The name of the conference service configured on the Jabber Server accessed by the service, if any.
-jabber.org.uk
The refresh page timeout for some pages accessed by the service. This value is in milliseconds.
-20000
The maximum number of messages the service will display between you and another user.
-10
What are the right settings?
rgds,
Thomas -
Porblem with Instant Messaging
Hello,
When I'm sending a Instant message from the collaboration launch pad I cannot view my message but the other person can view my message. when he is sending me a message he can view his message but I cannot view my message. Can anyone help me where is the problem.
Regards,
Murali.Hi Murali,
Could it be that another client is logged in to the system with your username? In such case, IM capabilities will be prevented from you.
Please try the following:
Verify that a popup blocker is disabled on your browser.
Logout from the Portal
Login again with your username.
After login - did you get a "You are already logged in" message? - if so, this means there is another open browser with your username, and that is the reason for the problem.
Otherwise, I would recommend open a CSN.
Best Regards,
Oren. -
PROBLEM with iMessage (Messages) on iPod touch HELPPP
We had a problem with iMessage. We're both using iPod touch with iOS5 version.
but we can't send messages. It says our emails/apple ids are not registered on iMessage.
I checked it on already on the Settings>iMessage> ON .
but still we cant use it. HELP PLEASE THANKSSame isue when tryn to change advanced setting :
+Mon Jul 5 15:51:39 iPhone profiled[266] <Warning>: profiled|Service starting...+
+Mon Jul 5 15:51:39 iPhone profiled[266] <Warning>: MC|Profile MCConfigurationProfile 0x113b30 has no friendly name.+
+Mon Jul 5 15:51:41 iPhone ReportCrash[267] <Notice>: Formulating crash report for process profiled[266]+
+Mon Jul 5 15:51:42 iPhone com.apple.launchd[1] (com.apple.managedconfiguration.profiled[266]) <Warning>: (com.apple.managedconfiguration.profiled) Job appears to have crashed: Bus error+
+Mon Jul 5 15:51:42 iPhone ReportCrash[267] <Error>: Saved crashreport to /var/mobile/Library/Logs/CrashReporter/profiled2010-07-05-155139iPhone.plist using uid: 0 gid: 0, synthetic_euid: 501 egid: 0+
Did you solved this issue ?
Message was edited by: lbarbisan -
Problem with logminer in Data Guard configuration
Hi all,
I experience strange problem with applying of the logs in DataGuard configuration on the logical standby database side.
I've set up the configuration step by step as it is described in documentation (Oracle Data Guard Concepts and Administration, chapter 4).
Everything went fine until I issued
ALTER DATABASE START LOGICAL STANDBY APPLY;
I saw that log applying process was started by checking the output of
SELECT NAME, VALUE FROM V$LOGSTDBY_STATS WHERE NAME = 'coordinator state';
and
SELECT TYPE, HIGH_SCN, STATUS FROM V$LOGSTDBY;
but in few minutes it stoped and quering DBA_LOGSTDBY_EVENTS I saw the following records:
ORA-16111: log mining and apply setting up
ORA-01332: internal Logminer Dictionary error
Alert log says the following:
LOGSTDBY event: ORA-01332: internal Logminer Dictionary error
Wed Jan 21 16:57:57 2004
Errors in file /opt/oracle/admin/whouse/bdump/whouse_lsp0_5817.trc:
ORA-01332: internal Logminer Dictionary error
Here is the end of the whouse_lsp0_5817.trc
error 1332 detected in background process
OPIRIP: Uncaught error 447. Error stack:
ORA-00447: fatal error in background process
ORA-01332: internal Logminer Dictionary error
But the most useful info I found in one more trace file (whouse_p001_5821.trc):
krvxmrs: Leaving by exception: 604
ORA-00604: error occurred at recursive SQL level 1
ORA-01031: insufficient privileges
ORA-06512: at "SYS.LOGMNR_KRVRDREPDICT3", line 68
ORA-06512: at line 1
Seems that somewhere the correct privileges were not given or smth like this. By the way I was doing all the operations under SYS account (as SYSDBA).
Could smb give me a clue where could be my mistake or what was done in the wrong way?
Thank you in advance.Which is your SSIS version?
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My MSDN Page
My Personal Blog
My Facebook Page
Maybe you are looking for
-
Hello Everyone, I am currently in Iraq so all this info is second hand from my wife:) This problem is on a late 2007 iMac 2.4ghz. Has leopard installed She told me that she was surfing in Firefox when the program became very slow and the icon was the
-
Can't open .NEF files in photoshop or RAW. Help!
I was always able to open .NEF files in RAW when I had my old computer, but I just recently got a new computer and now I can't open them. Does anyone know how to change the settings so that I'm able to open these files in photoshop CS5 Extended/RAW?
-
How to avoid output file and error lines when condition does not match
Hi Experts A customer want to send purchase order files to several vendors and each vendor has their own requirement to content and file format. I have prepared scenarios for each vendor and a template is (conditionally) called when CardCode matches.
-
I have proble of "cannot connect to itunes store. After I have updated the new software ios6, the problem arised in one of my mobile. In the second mobile, I didnot updated the software.Today in the morning, the problem ariesed in that mobile as well
-
Invalid application discriptor: Unknown namespace error
Hi all I am using flash Builder 4.6. I am working on google eyes project, this was created on flex 3.1 but I am using flash builder so I need to update it's sdk so i update it's sdk to 4.6.0, here I am getting an compilation error. Invalid applicatio