Problems with internert connect and OS X 10.4.11

Ever since I installed Tiger and then updated to 10.4.11, I have been having a frustrating problem on both of my computers.
On my IMac, when I click on connect (Internet connect), it tells me that authorization has failed. I open system preferences Network and click on assist me, then open diagnostics. As it goes through the diagnostic routine, the internet connection opens, and the network diagnostics says that the internet connection appears to be operating normally. When I close the connection and then try to open it with internet connect, same thing. Check diagnostics, same thing.
On my eMac, I cannot connect at all. The diagnostics says that the ethernet is not plugged in...it is not recognizing the connection. I unplugged the ethernet cable and plugged it into my laptop. Same cable, same setting, same everything. It works fine. So, I'm guessing it is something in the software. I have repaired the permissions and the system. Verification says No problems.
Any suggestions? Please!
Abe

Hi Abe, and a warm welcome to the forums!
Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, then move these files to the Desktop, then trash the originals since move only copies them...
/Library/Preferences/SystemConfiguration/preferences.plist
/Library/Preferences/SystemConfiguration/com.apple.airport.preferences.plist
/Library/Preferences/SystemConfiguration/NetworkInterfaces.plist
/Library/Preferences/SystemConfiguration/com.apple.nat.plist
Then move these...
/Users/YourUserName/Library/Preferences/ByHost/com.apple.networkConnect.<12 digit number>.plist
/Users/YourUserName/Library/Preferences/com.apple.internetconnect.plist
Go to System Preferences
Click Network
Highlight AirPort and click Configure...
Choose “By default, join: Preferred networks”
Select your access point and Remove your access point with the minus button.
Launch your keychain access in Utilities and delete your access point keychain entry.
Reboot

Similar Messages

Since upgrade to ios6 l have been having problem with wifi connection and connecting to App Store and iTunes store

Q since upgrade to iOS6 l have been having problem with wifi connection and getting into App Store and itunes

Saw this on another post.
Applecare Senior Advisor Txx Bxxx (I have his contact info in an email he just sent) just confirmed with me that the problem people are having with the App Store not loading is an apple issue with there servers, ITS NOT YOUR IPAD so don't go restoring it! It's not happening to everyone however but they are looking into it, its really hit or miss.
In the meantime ...........
The Complete Guide to Using the iTunes Store
http://www.ilounge.com/index.php/articles/comments/the-complete-guide-to-using-t he-itunes-store/
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Best Fixes for ‘Cannot Connect to iTunes Store’ Errors
http://ipadinsight.com/ipad-tips-tricks/best-fixes-for-cannot-connect-to-itunes- store-errors/
Try this first - Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
This works for some users. Not sure why.
Go to Settings>General>Date and Time> Set Automatically>Off. Set the date ahead by about a year.Then see if you can connect to the store.
~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting
http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet
http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Problem with SQL connection and a Collection

hi all,
I have two problems with sql...
1. how can I assign the values of a resultset to a collection?
2. how can I close the sql connection, because when I close the statement and connection error shows me in the resultset
thanks!

Hello Pablo,
RetrivingResults In Collection:
1)   use getObject method, and assign it to collection.
          Collection c_obj=new ArrayList();
         while(rs.next())
                c_obj.add(rs.getInt(Project_ID), rs.getString(Project_Name));
Closing ResultSet
2)               The close() methos of ResultSet closes the ResultSet object, like bellow
                ResultSet rs = stmt.executeQuery("SELECT a, b FROM TABLE2");
                rs.close(); //Closes the result set

Problems with USB connection and PC Suite

Connecting your device to the PC via USB doesn´t always work as smooth as it should. You can either use the setup´s repair function or if you are experiencing more serious problems, you need to uninstall all Nokia software form your phone and get it back on to make to work again.
This is how you do it:
Run the Nokia PC Suite setup file again and choose "repair" instead of "uninstall". This should solve some of the connectivity problems. If it didn´t work for you continue with the instructions below.
Go to Start --> Settings --> Control Panel --> Software, there you need to uninstall all Nokia software (Nokia PC Suite, Nokia Cable driver, PC Connectivity Solution ...)
Download and run Nokia PC Suite Cleaner
Reboot your computer
Download and install PC Suite here.
Connect your phone via USB cable (if possible use a different USB jack) and follow the instructions on the screen.
Now you´re set up to manage your phone with PC Suite!
For further questions ask within the board, for improvements on this article contact me.
Thanks to users scoobyman, cricfancy and shuntfield for their collaboration.
Message Edited by illinjah on 16-Aug-2009 07:02 PM
By clicking the "Kudos!" or the "Solution?" button on the right you can say "Thank You" and you´ll show the author and others that the post is useful.
The day we stop improving is the day we stop being good.

Hi pudu
thanks for the reply!
so sad, that doesn't work for me. the same with Nokia_PC_Suite_6_84_10_3_eng_us_web.exe
I have widcomm stack for bluetooth, there are lot of concerns about this,
but I do not understand why it cannot be connected via USB, too. Oh, no, it is connected, but that makes no sense

Problem with Hibernate Connection and MySQL

I have the following setup:
J2EE web-application, Java Servlets, Jsp, Hibernate for DB persistence, MySQL 4 (InnoDB tables)
I have not specified any connection pool parameters (c3p0) in my hibernate.cfg.xml, as the default settings should suffice for my purposes.
I use the SessionFactory object as follows.
In my database access class, I have a static declaration that initialises the new SessionFactory.
Then, I use Session session = sessionFactory.getSession(); and session.close(); to do my DB access.
Likewise, when storing data into the DB, I use a Transaction object, and use transaction.commit(); at the end of database access.
The problem is:
When I store data into the database, the changes do not occur on the website. In other words, the data gets stored into the tables (I check that via phpMyAdmin) but when accessing it, it only gets the old data. This is a serious problem as I am developing a website with attached CMS that will be used to update the pages.
The OTHER problem is:
Instead of having a static initialisation of the SessionFactory object, I created a new one every time I needed to access the database. Although I had a sessionFactory.close(); statement at the end of the database acccess, I got an exception:
"java.sql.SQLException: User db_user already has more than 'max_user_connections' active connections"
At the very moment I don't have access to my code.
If somebody has a suggestion or a solution to the problem, please reply.
Also, I will supply any code that is necessary to identify the problem.
Anders

Thanks for the tip, but how do you mean to update the object?
Here is the code that stores the data into the database:
'sessionFactory' is a static SessionFactory object.
     public static int saveOrUpdate ( Object object ) {
          int flag = 0; // 0 is true
          LOG.info("CMSLogic >>> saveOrUpdate() - object: " + object );
          Session session = null;
          Transaction transaction = null;
          try {
               session = sessionFactory.openSession();
               transaction = session.beginTransaction();
               LOG.info("CMSLogic >>> saveOrUpdate() - object to save or update: " + object );
               session.saveOrUpdate(object);
               // Flush the session
               if ( session!= null )
                    session.flush();
               transaction.commit();
          } catch ( Exception e ) {
               e.printStackTrace ();
               transaction.rollback();
               flag = 1;
          } finally {
               try{
                    if (session != null) {
                         session.close();
               } catch (Exception e) {
                    LOG.error("CMSLogic >>> saveOrUpdate() - threw exception: " + e);
          return flag;
     }Further, here is the code that fetches the data from the DB:
     public static Item getItemByURL ( String url ) {
          // Verify the URL
          if ( url.charAt(0) == '/' ) url = url.substring (1);
          String [] urlArr = url.split( "/" );
          LOG.info("BusinessLogic >>> getItemByURL() - split url: urlArr.length: " + urlArr.length );
          for ( int i = 0; i < urlArr.length; i++ )
               System.out.println ( urlArr[i] + ", " );
          if ( urlArr == null ) return null;
          if ( urlArr.length == 0 ) return null;
          if ( urlArr.length > 4 ) return null; // If the path depth is more than 3 levels, abort
          // Fetch data from DB
          List<Item> items = null;
          Session session = null;
          Query query = null;
          try {
               session = sessionFactory.openSession();
               if ( urlArr.length == 1 ) {
                    query = session.createQuery(
                         "FROM Item WHERE section.sectionKey LIKE 'root' " +
                         "AND filename LIKE '" + urlArr[0] + "'" );
               else if ( urlArr.length == 2 ) {
                    query = session.createQuery(
                         "FROM Item WHERE section.sectionKey LIKE '" + urlArr[0] + "' " +
                         "AND filename LIKE '" + urlArr[1] + "'" );
               else if ( urlArr.length == 3 ) {
                    query = session.createQuery(
                         "FROM Item WHERE section.sectionKey LIKE '" + urlArr[1] + "' " +
                         "AND section.parentSection.sectionKey LIKE '" + urlArr[0] + "' " +
                         "AND filename LIKE '" + urlArr[2] + "'" );
               else { // if ( urlArr.length == 4 ) {
                    query = session.createQuery(
                         "FROM Item WHERE section.sectionKey LIKE '" + urlArr[2] + "' " +
                         "AND section.parentSection.sectionKey LIKE '" + urlArr[1] + "' " +
                         "AND section.parentSection.parentSection.sectionKey LIKE '" + urlArr[0] + "' " +
                         "AND filename LIKE '" + urlArr[3] + "'" );
               items = query.list();
               LOG.info("BusinessLogic >>> getItemByURL() - items = query.list(): " + items );
               // Load the related revisions, too
               if ( !items.isEmpty() ) {
                    Hibernate.initialize ( items.get(0).getRevisions() );
                    LOG.info("BusinessLogic >>> getItemByURL() - initialised revisions for item." );
                    Hibernate.initialize ( items.get(0).getRevisions().get(0).getTemplate() );
                    LOG.info("BusinessLogic >>> getItemByURL() - initialised template for first revision." );
               // Flush the session
               if ( session!= null )
                    session.flush();
          } catch ( Exception e ) {
               e.printStackTrace ();
               LOG.error("BusinessLogic >>> getItemByURL() - threw exception: " + e );
          } finally {
               session.close();
               //sessionFactory.close(); // !!!???
          // Return query results
          if ( items == null ) return null;
          else if ( items.isEmpty() == true ) return null;
          else {
               LOG.info("BusinessLogic >>> getItemByURL() - items.get(0).getRevisions().size(): " + items.get(0).getRevisions().size() );
               LOG.info("BusinessLogic >>> getItemByURL() - items.get(0).getRevisions().get(0): " + items.get(0).getRevisions().get(0) );
               return items.get(0);
     }Any constructive suggestions and helpful comments are more than welcome.
I have been struggling with this problem for a while now.
Anders

Problem with the connection and synch

well i have problems since the first day i buy it... i'm really mad about this thing i waste lot of money, where i live ipod is a spensive object and i cant go to eny store becos i buy it to a friend who bring it from eeuu, anyway my problem is this... i conect my ipod to the pc, it synch, but just for a min when suddenly stop and the itunes turn off the dispositive... i have to plug it again to do everything but everytime happen the same thing
can somebody help me pls? sorry my bad english

Try this -
When you device is POWERED ON, remove the battery for a minute, and then reinsert the battery. This make a reboot to your device which resolves minor issues with the BlackBerry device.
And then try connecting Wi-Fi or Bluetooth.
tanzim
If your query is resolved then please click on “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit

Problem with Socket Connection and Out of Memory Exception in JavaME

Hi,
I am working on creating an application to check pop3 emails and send emails using smtp. I have implemented almost everything. It works fine if I run it with debugger [Step by step] but it fails when I run the application on emulator. It never connects to the pop3 server and runs out of memeory.
Help me on this issue.
Tarpinder

HI,
THanks for the reply..AM using workshop IDE and have tried the "clean" option also but of no use..Is there any other alternative to get rid of this exception ???
Regards

Every time I try and update my iphone 4 to ios 7.1 in iTunes 11.1.5 it says "connection reset" even when there is no problem with my connection

I have an iPhone 4. I use iTunes 11.1.5 on my Mac. I am trying to update to ios 7.1 through iTunes, but every time I do that, I get a "connection reset" error, even when I know there has been no problem with my connection.
The exact error message is as follows:
"There was a problem downloading the software for the iPhone "Anne's iPhone". The network connection was reset.
Make sure your network settings are correct and your network connection is active, or try again later."
I have checked several times. There is no problem with the connection, and I have tried to download the software several times today.
Any help you can give me would be appreciated.

Just managed to successfully download the update, having retried five or six times. I did unplug my phone while the download was taking place (had asked iTunes to download only, not to update) -- suspect this had no bearing on it whatsoever, and that persistence is the only way here.

HT201210 hi everyone, i have a problem about my iphone 4S, doesn't work with wifi connection and bluetooth since upgrade to the IOS 7.0.3. Can anyone can help me tosolve this problem?????Thank's regards paulus

hi everyone, i have a problem about my iphone 4S, doesn't work with wifi connection and bluetooth since upgrade to the IOS 7.0.3. Can anyone can help me tosolve this problem?????Thank's regards paulus

Try the suggestions here to see if they resolve your problem:
http://support.apple.com/kb/ts1559
If these don't work you may have a hardware problem. Visit an Apple store for an evaluation or contact Apple Support.

Is there a fix for the connectivity problems with iPhone 5S and ISO 7.0.2?

Is there a fix for the bluetooth connectivity problems with iPhone 5S and ISO 7.0.4?
I am having problems connecting the BT Audio and the handsfree phone connectyion is unreliable in 2012 Mitsubishi Lancer XL.
All worked OK with ISO 6.

Hello CraigNicholson
You would need to sync with iTunes to get that process to work for you. Check out the article below for more information on how to resolve that issue to get the proper token to use Push Notifications again.
iPad and iPod touch: Unable to use YouTube or Push notifications
http://support.apple.com/kb/ts3305
Regards,
-Norm G.

I'm trying to update my ipod touch but every time it downloads its fine until it processes it and it says it has a problem with my connection but my firewall is off?? Please help.

but every time i try to its fine until it processes it and then it says it has a problem with my connection but my firewall is off?? Please help.

I'm having the same problem trying to update my iphone 4(Just got a replacement), I also have firewall off...Hopefully someone can help. Mine says error -3259

I have a problem with mountain lion and now it's impossible to App Store to connect internet for looking for update !

Hi,
I have a problem !
I have mountain lion now ... and now it's impossible to App Store to connect internet for looking for update !
Could you help me!
Thanks
yculand

Hi,
I try but it s not nice sometime app store connect to internet and sometime he cannot connect for looking for update !
For information i dont have problem with internet connection !
I think app store is not stable with mountain lion.
Could you help me ?
Thanks in advance for your anwser.
yculand

Problem with Internet connection sharing between eMac and Powerbook G3

Hi,
I seem to be having a slight problem with internet connection sharing.
My eMac is the main machine with the internet connection, and its running 10.4.6, the Powerbook G3 is running 10.2.8.
I can connect them all up and get online with both, but I the problem I am having is when I turn the Firewall on on the eMac, the powerbook can't connect.
Is there anyway I can keep the Firewall enabled and still use internet connection sharing?

How do I know which ports the Powerbook is using?
Also I had web sharing enabled on the eMac and it made no difference at all.
Plus I don't know if this means anything to you, trying to decipher it myself, all I can make out myself on there is port 80.
May 31 21:26:30 Craigs-Macintosh ipfw: 12190 Deny TCP 10.0.2.2:49743 67.15.24.40:80 in via en1
May 31 21:26:34 Craigs-Macintosh ipfw: Stealth Mode connection attempt to UDP 10.0.2.1:192 from 10.0.2.2:49531
May 31 21:26:34 Craigs-Macintosh ipfw: Stealth Mode connection attempt to UDP 10.0.2.1:192 from 10.0.2.2:49532
May 31 21:26:39 Craigs-Macintosh ipfw: Stealth Mode connection attempt to UDP 10.0.2.1:192 from 10.0.2.2:49533
May 31 21:26:39 Craigs-Macintosh ipfw: Stealth Mode connection attempt to UDP 10.0.2.1:192 from 10.0.2.2:49534
May 31 21:26:42 Craigs-Macintosh ipfw: 12190 Deny TCP 10.0.2.2:49743 67.15.24.40:80 in via en1
May 31 21:26:44 Craigs-Macintosh ipfw: Stealth Mode connection attempt to UDP 10.0.2.1:192 from 10.0.2.2:49535
May 31 21:26:44 Craigs-Macintosh ipfw: Stealth Mode connection attempt to UDP 10.0.2.1:192 from 10.0.2.2:49536
May 31 21:29:12 Craigs-Macintosh ipfw: 12190 Deny TCP 10.0.2.2:49746 17.254.0.91:80 in via en1
May 31 21:29:15 Craigs-Macintosh ipfw: 12190 Deny TCP 10.0.2.2:49746 17.254.0.91:80 in via en1

Database connectivity toolkit problem with WINDOWS VISTA and Microsoft jet 4.0 provider

Hi again,
I'm experiencing a problem with Database connectivity toolkit and Microsoft Jet 4.0 provider (MS ACCESS mdb database).
I was able to get my application to work properly on my PC: WINDOWS XP PROFESSIONAL, VERSION 2002, SERVICE PACK 3 and Msjet40.dll ver. 4.0.9511.0 (Windows XP SP3 and Security Bullettin MS08-028).
The same connectivity toolkit seems to have problems (although I didn't get any error dialog) on a laptop with WINDOWS VISTA ULTIMATE, SERVICE PACK 2 and Msjet40.dll ver. 4.0.9755.0.
Does anyone have an idea whether it is a sort of compatibility issue or a different thing?
Would it be possible to include my DLLs into the installer in such a way LabVIEW application calls those DLLs instead of the ones it finds on the host PC?
Thanks a lot. Any suggestion or advice very welcome and appreciated.

I ran into this with Windows7 64 but, could not get the jet 4.0 to work. Endnd up dumping access and used sql server express, its free, and all my code worked fine, just used a different UDL to connect. I wasted lots of time trying to find a way of getting the jet4.0 to work with 64bit windows.
Paul Falkenstein
Coleman Technologies Inc.
CLA, CPI, AIA-Vision
Labview 4.0- 2013, RT, Vision, FPGA

TS1398 hi, my iphone is not connecting to wifi. there is no problem with the connection of wifi. i tried so much but the connection is not stable. some times it connect and sometimes not connecting at all. if connected also its disconnecting again.pls hel

hi, my iphone is not connecting to wifi. there is no problem with the connection of wifi. i tried so much but the connection is not stable. some times it connect and sometimes not connecting at all. if connected also its disconnecting again.pls help

At the very least, I recommend you restart your router, (your internet box).
More detail on your problem is needed - are you in a submarine? On the moon? On a tropical island?
You can help yourself by providing as much info as you can about your present situation - what kind of router do you have? Have you moved it? DId you update it? Did you do anything to change your setup, and if you did, what?

Problems with internert connect and OS X 10.4.11

Similar Messages

Maybe you are looking for