Problems with IO7 and the block of complete download of many app

I have many problems after download of IO7 with password for Appstore and overall I can't complete the updatings of all the App that need it. Thanks

Try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps BEFORE doing the reset.

Similar Messages

Has anyone experienced problems with Mackeeper? I did not complete downloading this software. Yet, occasionally when on the internet, I will have the MacKeeper multi-colored circle replace my pointer. How do you deal with this?

Has anyone experienced problems with Mackeeper? I did not complete downloading this software. Yet, occasionally when on the internet, I will have the MacKeeper multi-colored circle replace my pointer. How do you deal with this?

Welcome to Apple Support Communities
Don't download MacKeeper. Users complain about this app and it damages OS X. Also, Mac OS X knows how to take care of itself, so you don't need any other cleaning application that may damage OS X. See > https://discussions.apple.com/docs/DOC-3691

Mountain Lion fails to install saying it cannot create the recovery; I had a similar problem with Lion and the Apple Store that helped me resolve it gave me an installable version of Mountain Lion on a flash drive for my inconvenience....

Mountain Lion fails to install saying it cannot create the recovery; I had a similar problem with Lion and the Apple Store that helped me resolve it gave me an installable version of Mountain Lion on a flash drive for my inconvenience....is there some trick I am missing or do I need to make an appointment with a genius...

I have the MacIntosh volume and the Boot Camp partition only. I know that when I installed Lion, I had to go through a whole back-up and recovery of Windows and then re-format the drive.
The tech at the Apple Store had a previous life as a MSCE and was very helpful. I believe he even said that I should not have htis problem with Mountain Lion which is why they gave me the flash with it onboard. I was in the process of starting a new job when I went to Lion, so I have waited to do this next and probably last upgrade to this old MBP since I doubt Apple will support this MBP in Maverick.
I do not have another installation, so that is not an option. I will try to create an external, I have plenty of hard drives around and see if I can get it done that way. It might take me a week or two to get back to it, but I will comment back upon completion of that effort. Thanks for your help....Dave Iverson

I'm having problems with iPhoto and the facebook set-up. Every time I attempt to do so it says an error has occured and try again later. I have not seen a solution posted. Therefore, how does one contact Apple to solve the problem? I'm new to the worl

I'm having problems with iPhoto and the facebook set-up. Every time I attempt to do so it says an error has occured and try again later. I have not seen a solution posted. Therefore, how does one contact Apple to solve the problem? I'm new to the world of iMac but I find it a bit frustrating trying to solve basic issues/problems:(

For what it's worth, you posted this in 2011, and here in 2014 I am still having this same issue. Over the last two days, I have had to unlock my apple account 8 times. I didn't get any new devices. I haven't initiated a password reset. I didn't forget my password. I set up two factor authentication and have been able to do the unlocking with the key and using a code sent to one of my devices.
That all works.
It's this having to unlock my account every time I go to use any of my devices. And I have many: iMac, iPad, iPad2, iPad mini, iPhone 5s, iPod touch (daughter), and my old iPhone 4 being used as an ipod touch now. They are all synced, and all was working just fine.
I have initiated an incident with Apple (again) but I know they are just going to suggest I change my Apple ID. It's a simple one, and one that I am sure others think is theirs. I don't want to change it. I shouldn't have to. Apple should be able to tell me who is trying to use it, or at least from where.
Thanks for listening,
Melissa

Are there any known problems with Macs and the mp3 playback in Adobe Connect ?

One user using an Apple Mac has complained of not being able to hear the mp3 sound playback in a meeting.
Is this a problem with Apple Mac and mp3 compatibility or is it an individual soundcard issue ?

I use several Macs with Adobe Connect and I have even created MP3 files for playback in the room. Works fine on all my macs. It's basic Flash. Suggest they clear their browser cache, replace their host-add-in if using one. Run the audio wizard as well to make sure sound is working in Connect.
All of the Adobe Connect Government engineers use Macs all the time so we've never had an issue with MP3's.

Problems with Whatsapp and the iOS 8.1.2

Hi
I have had many problems using whatsapp with my iPhone since I update the iPhone iOS to 8.1.2.
Whatsapp gets locked frequently and I have to erase it and download again, loosing the last conversations.
What is happening? What could I do?
Thanks
Jorge

Check with Whatsapp support. If you have downloaded a new one and it is still acting up, there could be something wrong with it and their support should be able to answer your question. That is not an Apple application.

Having problems with InDesign6 and the new OSX Mavericks

I just downloaded the new OSX and now my Id6 won't open. It starts initializing and the I get the message "InDesign quit unexpectedly." I am in the middle of publishing a book for someone using the "export to kindle" plug-in which isn't compatible with IdCC. Has anyone else had this problem?

I have just run into the same issue. New Macbook Pro running Maverick and I have Vectorworks 2011. Appple support recommends against partitioning the hard drive on a new MacBook Pro running Maverick. (The first call the apple person suggested it. On a follow up call they strongly recommend against doing it because it can screw up the firmware.) How did doing the downgrade work for you, and how did you do it, external drive, partition? I hate to drop $1300 on Vectorworks when I don't yet need it.

Problems with VISA and the serial port

Hello,
i have a little problem with the serial port and VISA. I have changed an existing LabView- Software in that way that I have replaced the serial- module by the VISA- module. The function of the program is to communicate with different devices by RS232. After changing the modules to VISA the software doesn't work probably. The problem is, that when I try to communicate with one of the devices first I get no answer. When I try it a second time after some seconds the communication works perfect. After about a minute I send another message to my device but there is no answer again. I have to send the message again.
I hope someone in this forum can help me with my problem
cu Marco

Marco,
this sounds very much like a problem with the termination of your messages. You may have to tell VISA to add a termination character. Please follow the instructions in this document.
Best regards,
Jochen
National Instruments Germany

Problems with links and the "advanced" field

Has anyone else had problems with the advanced field when
making a new link? It seems I have to edit it three or four times
before it will actually take the link I put in ("
http://www.blah.com/" instead of
"../../"). Anyone else?

I am having the same problem... although I am only trying to link between "One of My Pages" i.e navigation menus.
It is pretty random which links work and which don't as far as I can tell anyway.
The links work fine when I activate hyperlinks in iWeb but as soon as I publish to a folder some of them don't.
I will post if I find a solution, but I have read and tried just about everything.
Best
PowerBook G4 Mac OS X (10.4.9) 1.25 GB RAM

Problem with subtotal, and the total icon is not displayed at the toolbar

Hi all,
I'm currentlyhaving difficulties working with the subtotal and the grandtotal. I have the code in the right place like the sort table
CLEAR k_sort.
ADD 1 TO k_sort-spos.
k_sort-fieldname = pv_fieldname.
k_sort-up        = c_x.
k_sort-subtot    = pv_subtot.
APPEND k_sort TO i_sort.
and the fieldcatalog
CLEAR k_fieldcat.
add 1 to k_fieldcat-col_pos.
k_fieldcat-fieldname = pv_fieldname.
k_fieldcat-tabname    = c_tabname.
k_fieldcat-seltext_l = pv_seltext.
k_fieldcat-outputlen = pv_outputlen.
k_fieldcat-datatype   = pv_datatype.
k_fieldcat-do_sum     = pv_dosum.
APPEND k_fieldcat TO i_fieldcat.
but it didn't seems to show both the total and subtotal. Even the icon is not displayed at the ALV toolbar. The field which I need the total is a currency field. I even try other fields (interger fields) but with no luck. I'm using REUSE_ALV. Any help is greatly appreciated.

hi,
In field catalog for the particular column which you want to sum make that as 'X'.
say
WHEN'MATNR'.
it_fcat-do_sum = 'X'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
       EXPORTING
            i_callback_program     = report_id
            i_grid_title           = ws_title
*            i_callback_top_of_page = 'TOP-OF-PAGE'
            is_layout              = wa_layout
            it_fieldcat            = i_fieldcat[]
            it_sort                = i_sortcat
            i_save                 = 'A'
            it_events              = i_events
       TABLES
            t_outtab               = i_reportdata1
       EXCEPTIONS
            program_error          = 1
            OTHERS                 = 2.
IF sy-subrc <> 0.
This will enable.

After having installed Mavericks I have problems with PSCS5 and the RAW converter. The glider for Exposure goes back to zero, when I use the fill in glider.

When I use PSCS5 after having upgraded to Mavericks I have problems when I use the RAW converter. The glider for exposure goes back to sero, hven I use the glider for fill in light, that means that my PSCS5 program not can be used. What do I do?

Single click on the Home button. Then double click on the Home button. In the recently used row, touch and hold the Contact app till they start to wiggle and then tap the minus sing by the contacts app.
Also make sure the Contact program on your computer is closed.

Problems with ADE and the Nook

I've encountered an interesting issue with the ADE and the Nook. ADE dumps the titles in the root directory, which the Nook is unable to see. I have to manually move the "Digital Editions" folder as a subfolder into the Nook's "my documents" folder. It's more of an annoyance than anything else, but is there a workaround so that when one drags and drops the book title, it is copied into the right directory?

Only if you can find the book!!!!! ADE has 300+ of my books.....too bad I can't even get the from any library on ADE.

Problem with Expose and Adobe AIR application -can't click on app in Expose

I just installed a new Adobe AIR application called TwitterLocal. The app was working fine until I accidently hit some keyboard shortcut and the application window disappeared. I figured I accidently assigned the window to some other "space," however I do not have SPACES turned on. Furthermore, when I select EXPOSE, I can now see the content of the application's window, however if I click on the app (which takes on that grey-highlight appearance when you mouse over it) the desktop returns to its normal position. I can see via the top status bar that the app is currently selected, but I cannot access the app window.
Is there any way to send an app that was "sent" to expose back to the normal desktop? I've tried rebooting and even uninstalling/reinstalling the app but it is still lost in expose.
Any thoughts on this would greatly be appreciated.

Solution was to change display to lower resolution, then the Adobe AIR app TwitterLocal became visible on the standard desktop and I was able to click on and move the app window towards the left of the desktop. Once I switched the resolution back, everything was ok.

Problems with sync and the music player

Ok, here we go. my problems started when I bought a mac (I used to have a pc) I transfered all my music and apps to my new mac then... when I tried to sync with my Iphone 4s all my contacts were erased! D: but i think that was because the new computer didnt have a thing, well... thats not the deal, the thing is im not sure if the iphone is recognizing this new computer as the one hehe, the main, so it can save the backup and all that stuff. I have already autorized this mac, and I have checked the option to sync information, music, videos, and photos. After all of that I sync the music and see what happened! it happened to all of the abecedary, I have already turn the device off, sync again and nothing. someone can help me please?

Please someone help me

Problems with Ram and the UT2004 Engine

Hi,
Got four sticks of 512 MB Geil Value Dual Channel Ram and have filled all four slots on my new MSI K8N Neo 2 board.
Now everytime I play a game on the UT2003/4 engine (Ravenshield, Republic Commando) the machine locks and freezes making clicking noises.
If I drop back to a gig no problem
Every other game I have tried HL2, Doom 3 etc no probs.
Has anyone experienced anything similar. It does sound like a game engine problem but I`m open to suggestions to get it running in these game with the full 2 gig enabled.
Full System Spec
Amd 3200+ Wincherster core.
K8N Neo 2
2 Gig of Geil Ram
Asus X800XT PE
Win XP SP2
Barracuda 7200.8 Hard Drive
Sound Blaster Audigy 2 Platinum.

You should start by increasing the RAM voltage slightly to see if that helps at all.
Changing the AGP apature size could also matter.

Problems with IO7 and the block of complete download of many app

Similar Messages

Maybe you are looking for