Problems with ios7 and imessage
Since I upgraded to ios7 my wife stopped receiving my texts. it was suggested that we turn off imessage which we did and it seemed to work. now today I am trying to text her and the first message went out in green, the next message went out in blue and said delivered. The next two texts have gone out in green and i dont think that she has received them.
Any ideas please?
Since I upgraded to ios7 my wife stopped receiving my texts. it was suggested that we turn off imessage which we did and it seemed to work. now today I am trying to text her and the first message went out in green, the next message went out in blue and said delivered. The next two texts have gone out in green and i dont think that she has received them.
Any ideas please?
Similar Messages
-
Got problems with iOS7 and home sharing
Got problems with iOS7 and home sharing music. How do you home share music now. I don't have a airplay button either. It all work fine until I updated
I too am haing the same problem.
Oh i have an iphone 4 by the way - if this helps.
I have updated the itunes to 11 point something (latest as of 19th Sept '13) and still not joy.
My phone sees the network, then when i try to connect to it in the "Sharing" spot in music, it gives me the rotating icon and then i get "Unable to Home Share at this time".
I had this problem with the ios 6, which was log out of you apple account, and then turn off the phone -this was supposed to clear all the history and old connection details etc.
Then restart the phone and re-log into itunes account.
As i say - that worked last time, but this time, i have no idea what is going on.
I am looking at reverting back to the ios 6, and waiting for ios 7.1 which to be honest - wont be long away with the amount of issues people are having. -
Problems with FaceTime and iMessage
My iPad mini isn't letting me log into iMessage or FaceTime. It asks for my Apple ID and I enter it but then it says "an error occurred during activation. Please try again." I'm getting very stressed and I really don't want to get a whole new device. Please help!!!
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: FaceTime is 'Unable to verify email because it is in use'
http://support.apple.com/kb/TS3510
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Set Up Alert Sounds
http://www.quepublishing.com/articles/article.aspx?p=1873027&seqNum=3
Extra FaceTime IDs
http://tinyurl.com/k683gr4
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Fix Can’t Sign Into FaceTime or iMessage iOS 7
http://ipadtutr.com/fix-login-facetime-imessage-ios-7/
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457#19087457
Send an iMessage as a Text Message Instead with a Quick Tap & Hold
http://osxdaily.com/2012/11/18/send-imessage-as-text-message/
To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
How to Receive SMS Messages on an iPad
http://yourbusiness.azcentral.com/receive-sms-messages-ipad-16776.html
You can check the status of the FaceTime/iMessage servers at this link.
http://www.apple.com/support/systemstatus/
Cheers, Tom -
Login problems with facetime and Imessage
I have IPAD 2 upgraded to IOS 6.0. I am living at Alexandria EGYPT.
I didn't face any problem with both apps until the 2nd of October 2012. Since then and both apps telling me that Apple ID doesn't match with the entered password. The same password is used for app store and working with no problem, the password have been used even to log in to the support as well as Icloud.
I have tried the following actions with no result:
1- Soft reset the IPAD.
2- Time is set to automatic.
3- Set the time to USA.
4- Time set back to auto.
5- Connect using different WiFi networks.
I hope I can find a solution, I am using both apps to keep in touch with my family.I did a total reset and start the IPAD as a new one before restore...same problem exist
after restore try again and with the same problem...
Finally I have created a new apple ID and used it only for facetime and imessages...and it works....
I can't really understand the problem....
It is not a problem with communication or IPAD settings because it worked with another apple ID
it is not a problem with server or account because I am still using my old ID with my macbook
strange -
IOS 7.1 Update problems with text and imessage
SInce I did the latest updates I've had problems with my text and iMessage. First I've never used iMessage in the past and always got my text messages and sent text just fine. Now it seems at though I can only have one or the other. If I have friends using iMessage and I have my iMesage turned off they wont get my message and if I have my iMessage turned on and I send to someone with and android they wont get my message either. It's like it can't figure out if it's and iMessage or a normal text. I have it set to send as SMS when iMessage is unavailbe but it doesnt sent as a text message.
So at this point I wont be ablet to get my messages from both iMessges and SMS..
Anyone else have this problems.Hello crissyanon,
The following article provides some useful information and troubleshooting steps that can help get Messages working.
iOS: Troubleshooting Messages
http://support.apple.com/kb/TS2755
Cheers,
Allen -
Is there a problem with IOS7 and AT&T Nav.
My At&T Navigation does not load after I downloaded IOS7.
There are reports that iMessage and FaceTime are down.
-
Problems with IOS7 and my Bluetooth
Every since I installed IOS7 on my iPhone 5 all 3 of my Plantronics Bluetooths (so I know it's not the Bluetooths) get a lot of static and the go off the air. Just voila, I'm disconnected.
I've re-booted, uninstalled and re-installed the bluetooths.
Open to suggestions, provided they are not illegal and I will consider immoral.
MarieWireless earpiece for phone calls and listening to audio sounds. It's the Plantronics M50 for all 3.
Marie -
Dear friends,
Major problem with ios7 just came up. When ending a call either from headset or the phone itself it keeps redialing the last number. The only way to shut it is to use the home button key and then choose the banner of the active call on the top of the screen and press end call.
Has anybody encountered the same problem?
Ii have the same problem as well as my daughter. have to restart phone and then it stops, but after a couple calls it will do again
-
Hello community I have a big problem with my iphone 4s as precent problem with wifi and ios7. my phone was a champ when actualize this, eh degrade searched everything but I can not because I get the error 3194. I want a solution please
This support document http://support.apple.com/kb/ts4451 relates to the 3194 error. Generally this error has to do with trying to install an iOS that is not the most current. Maybe you tried to jailbreak the phone, or downgrade iOS? Any of this apply to you?
-
Problem with iOS7 : I have a message on my screen "This phone is not registred as a developper phone..." or something like that, can you help me because I download the iOS7 Beta even if I was not a developper. Thank you very much if you help me.
JaillotJb wrote:
I download the iOS7 Beta even if I was not a developper.
if you downloaded it and are not a developer, then we are not allowed to help you here. sorry. -
Is there a problem with IM and FaceTime as it won't recognise my Apple ID
is there a problem with IM and FaceTime as it won't recognise my Apple ID?
There are reports that iMessage and FaceTime are down.
-
Problem with JFrame and busy/wait Cursor
Hi -- I'm trying to set a JFrame's cursor to be the busy cursor,
for the duration of some operation (usually just a few seconds).
I can get it to work in some situations, but not others.
Timing does seem to be an issue.
There are thousands of posts on the BugParade, but
in general Sun indicates this is not a bug. I just need
a work-around.
I've written a test program below to demonstrate the problem.
I have the problem on Solaris, running with both J2SE 1.3 and 1.4.
I have not tested on Windows yet.
When you run the following code, three JFrames will be opened,
each with the same 5 buttons. The first "F1" listens to its own
buttons, and works fine. The other two (F2 and F3) listen
to each other's buttons.
The "BUSY" button simply sets the cursor on its listener
to the busy cursor. The "DONE" button sets it to the
default cursor. These work fine.
The "SLEEP" button sets the cursor, sleeps for 3 seconds,
and sets it back. This does not work.
The "INVOKE LATER" button does the same thing,
except is uses invokeLater to sleep and set the
cursor back. This also does not work.
The "DELAY" button sleeps for 3 seconds (giving you
time to move the mouse into the other (listerner's)
window, and then it behaves just like the "SLEEP"
button. This works.
Any ideas would be appreciated, thanks.
-J
import java.awt.BorderLayout;
import java.awt.Cursor;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import javax.swing.JButton;
import javax.swing.JFrame;
import javax.swing.JPanel;
import javax.swing.SwingUtilities;
public class BusyFrameTest implements ActionListener
private static Cursor busy = Cursor.getPredefinedCursor (Cursor.WAIT_CURSOR);
private static Cursor done = Cursor.getDefaultCursor();
JFrame frame;
JButton[] buttons;
public BusyFrameTest (String title)
frame = new JFrame (title);
buttons = new JButton[5];
buttons[0] = new JButton ("BUSY");
buttons[1] = new JButton ("DONE");
buttons[2] = new JButton ("SLEEP");
buttons[3] = new JButton ("INVOKE LATER");
buttons[4] = new JButton ("DELAY");
JPanel buttonPanel = new JPanel();
for (int i = 0; i < buttons.length; i++)
buttonPanel.add (buttons);
frame.getContentPane().add (buttonPanel);
frame.pack();
frame.setVisible (true);
public void addListeners (ActionListener listener)
for (int i = 0; i < buttons.length; i++)
buttons[i].addActionListener (listener);
public void actionPerformed (ActionEvent e)
System.out.print (frame.getTitle() + ": " + e.getActionCommand());
if (e.getActionCommand().equals ("BUSY"))
frame.setCursor (busy);
else if (e.getActionCommand().equals ("DONE"))
frame.setCursor (done);
else if (e.getActionCommand().equals ("SLEEP"))
frame.setCursor (busy);
try { Thread.sleep (3000); } catch (Exception ex) { }
frame.setCursor (done);
System.out.print (" finished");
else if (e.getActionCommand().equals ("INVOKE LATER"))
frame.setCursor (busy);
SwingUtilities.invokeLater (thread);
else if (e.getActionCommand().equals ("DELAY"))
try { Thread.sleep (3000); } catch (Exception ex) { }
frame.setCursor (busy);
try { Thread.sleep (3000); } catch (Exception ex) { }
frame.setCursor (done);
System.out.print (" finished");
System.out.println();
Runnable thread = new Runnable()
public void run()
try { Thread.sleep (3000); } catch (Exception ex) { }
frame.setCursor (done);
System.out.println (" finished");
public static void main (String[] args)
BusyFrameTest f1 = new BusyFrameTest ("F1");
f1.addListeners (f1);
BusyFrameTest f2 = new BusyFrameTest ("F2");
BusyFrameTest f3 = new BusyFrameTest ("F3");
f2.addListeners (f3); // 2 listens to 3
f3.addListeners (f2); // 3 listens to 2I've had the same problems with cursors and repaints in a swing application, and I was thinking of if I could use invokeLater, but I never got that far with it.
I still believe you would need a thread for the time consuming task, and that invokeLater is something you only need to use in a thread different from the event thread. -
Problem with installing and running some applications or drivers
When installing and installing some items, towards the end of the installation I get this message:
/System/Library/Extensions/comcy_driver_USBDevice.kext
*was installed improperly and cannot be used. Please try reinstalling it or contact product's vendor for update*
The end result is that some things do not seem to work properly, such as my HP printer. Would anybody have any ideas on how to fix this problem?Thank you for your response. Originally, I had a problem with Airport and ended up reinstalling Snow Leopard. Since then, when downloading upgrades etc, such as HP printer drivers, iTunes etc., towards the end of the download when its running the script, I get this message: /System/Library/Extensions/comcy_driver_USBDevice.kext
+was installed improperly and cannot be used. Please try reinstalling it or contact product's vendor for update+
Sometimes, the download hangs and is unable to complete. The main problem I've encountered so far with an application is when I use the printer to scan an image via Preview, it's blank: there's nothing there. -
Problems with outlook and address book contacts: my outlook contacts had around 3,000 entries. Outlook duplicated entries and have now 340,000. I reinstalled microsoft office and, thus, outlook, and reinstalled mac OS X system and applications. While I managed to delete outlook contacts so that I can re-sync with my blackberry, the contacts at Mac Address Book were not deleted and still have over 340,000 entries. I do not mind deleting all contacts since I have back up, but I have not been able to delete them. Also, when I go at Address Book and try to delete or merge duplicated entries, the system takes forever and never ends because of such large amount of entries. Worse, when I do so I run out of RAM memory.
My Macbook pro is just 2 months old.
What should I do? Is there a way to delete my Mac Address Book without having the problem above?
Many thanks
Regiszlatan24 wrote:
For solving out troubles connected with corrupted or lost address book you may use address book recovery. It owns various features such as restoring wab files, it working under any Windows OS. The utility has modern and easy to use interface due to almost every experienced users.
If it is a windows problem it's not going to run on the OP's MacBook Pro -
Problems with Safari and Firefox (HTTP?)
Problems with Safari and Firefox (HTTP?)
On a laptop G4, 10.5.8 and Safari 5.02 I experience the following:
On the account of my oldest daughter everything works fine, i.e. wireless internet works and no problems with mail or safari.
On the same laptop, on the account of my other daughter, the wireless is OK, she can mail etc. But safari nor firefox works. It says: can’t find server (whatever site) and in the activity window it looks if safari tries to open files (in the safari preferences-folder) in stead of http. Same applies to Firefox, so maybe it has more to do with HTTP in general?
What goes wrong? What to do? I tried the following on the host terminal (tips from Apple)
defaults write com.apple.safari WebKitDNSPrefetchingEnabled -boolean false
and
defaults delete com.apple.safari WebKitDNSPrefetchingEnabled
but that did not help,
NanneI'm still wondering why it happens now at this moment in time...
PC does seem to be a bit odd & inconsistent, the few times I've tested with it, at least so far as we content filtering goes; and if I remember rightly, you're not the first to report previously ok settings suddenly preventing some or all internet until pc is switched off altogether.
It may work when re-enabled
Maybe you are looking for
-
Deriving 1 Value from 2 Fields Based on Values in Fields
I have a query that needs to return 1 of my values based on the values from 2 fields from 2 tables. However, the value should only be returned in 1 field and one of the fields should be evaluated first. If this first evaluated field has a certain val
-
Trouble attaching photos....
Hello, I am having an issue in being able to attach photos to emails. When using Mail, if I choose to attach files (photos) to the email, the following dialogue box appears (as expected!): However, there is no way to browse through and select differe
-
New Update: FATAL?! Can't power ON after update!
Just updated my Apple TV; it then powered down; won't restart - checked connections and remote- all I order but it seems as if update altered its ability to power on. Can't do anything now- it's a brick.
-
Regarding HR ABAP (query selction)
Hai Experts, if i give the month and date means , I need to display all the values for all years. for example if i give month as may and then date as 15 means then i need the values for all years for that corresponding month and date upto system date
-
I am trying to launch a WMV file. This is an interactive CD, the .WMV file will reside on the CD. I have used the getURL function, but I don't know if it is possible to use some function to launch the file. I am suspecting that this would involve dec