Problems with iPhone 5 pictures.
I cannot seem to email to myself pictures I have taken on my iPhone 5. I need to transfer them to my computer. How do I do it?
As you would from any digital camera
iOS: Importing personal photos and videos from iOS devices to your ...
Similar Messages
-
Anyone having problem with iphone getting a not delivered message after sending pic and it really is getting delivered to recipient.
Same problem here with and I've done everything shy of a total reset which I also find unacceptable. This problem exists on all iMessage platforms (iPhone, iPad, and Mac) so I don't see how restoring my iPhone would help the problem.
-
Sound problems with iPhone 5s video. Help please
When recording a video using my iPhone 5s the only sound you can hear on play back is a loud crackling noise. There are no problems with the picture of the video, just the messed up audio. What is causing this annoyingly crackling noise and how do I fix it?
Did you already try these tips from Troubleshooting iPhone hardware?
Acoustic-speaker/microphone/receiver
Find troubleshooting steps for:
No sound or distorted sound from speaker
Microphone issues
Receiver issues -
Reception / Battery problems with iPhone 3GS after upgrading to iOS 4.2.1
There are major reception and battery problems with iPhone 3GS after upgrading to iOS 4.2.1.
I can not believe that Apple did not test this for major bugs like this one is.
I am a business user and can not effort to have bad reception. Apple wants to gain in the business clients... I never had this with my former BlackBerrys!
I need a reliable phone not a play thing like this is right now, it just needs it to work propely. And if a major bug like this comes along, fix it immediately. After the iPhone4 story, now this...incredible! Going back to my reliable BlackBerry! It just ain't reliable and takes forever to fix a problem.I have the same issue after iOS 4.2.1 update. I am using iPhone 3GS officially unlocked by Apple. I tried using different SIM cards and both carriers show same problem when using phone in 3G mode. Phone falls back to EDGE mode showing 'E' from '3G' at start. I have reset the phone and rebooted several times and moved to different cell areas in the city just to verify the problem.
I had no such issues earlier. I also have Nokia E71 which shows full signal and has no such issues.
I have posted the bug on apple iphone feedback page. I hope they Apple will fix the problem and test the release properly on all models before releasing to public. -
i have a problem with iphone 4s...is ringing but another sounds not working....please help me!!!
Hi pystyke,
Welcome to Apple Support Communities.
You may find these links helpful with troubleshooting the audio issue you're experiencing:
iPhone Assistant
http://www.apple.com/support/iphone/troubleshooting/
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Best,
Jeremy -
Having a little problem with iPhone 3G.
Hi!
I have problem with Iphone 3G 16 GB. I was trying to reset all the settings in the iphone but something went to wrong side and now probably operating system is damaged and only icon for connection to the iTunes is showing up. ITunes is not recognizing the phone. Please can you help me!
Thanks in advance.Hey gonche,
The iPhone is in Recovery Mode, generally the iPhone will have to be restored to get it out of recovery mode.
This article: http://docs.info.apple.com/article.html?artnum=305744 will walk you through restoring the iPhone.
-Jason -
Have any of you had a bending problem with iPhone 6 plus?
has anyone had a bending problem with iPhone 6 Plus?
http://www.washingtonpost.com/blogs/the-switch/wp/2014/09/25/no-you-probably-can t-bend-the-iphone-6-plus-unless-youre-a-bodybuilder/?hpid=z17
-
I have a problem with Iphone 5 pocketdialing constantly
I have a problem with iphone 5 pocketdialing constantly
Tap the Sleep/Wake button BEFORE you put your phone in your pocket.
-
Hello, I have a problem with iPhone 5c softhware update ( The iPhone "iPhone" could not be restored. An unknown error occurred (27))
Error 1 or -1
This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.
The" may need service' meand there is a hardware problem. In that case make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
Sir i have a problem with iphone its factory locked how to unlock
sir i have a problem with iphone its factory locked how to unlock
You have asked this question 3 times. Each time the answer being the same. ONLY, the original cellular provider can unlock the phone. However, if the phone has been previously hacked to provide unlocking, the fact that you have updated it has now re locked it. It is possible that it might never be ale to be properly unlocked.
https://discussions.apple.com/message/22282979#22282979 -
dears,
I have a problem with iPhone is that I can replace it at points of sale in the U.S. because I bought from Saudi Arabia because the problem I think in the hard ware I do resoftware more than 3 times did not fix.
Network also always missing.
I am living in KS Wichita. I hope you help me pleas.
Regards.iPhone warranty is not international. You will have to return your
iPhone to Saudi Arabia for repair/replacement. Either take it back
yourself or send to friend/relative for them to take to Apple. Apple
will not accept international shipments for repair nor will Apple
ship repaired/replaced iPhones out of the country where the repair
was done. -
Hi Guys,
I have a problem with Importing Pictures onto my Mac mini with Lion installed by using a Card Reader,
What is the problem here so I can get Pictures onto my Computer. ,Hi Noob Søren
There are a few things that are confusing in your question.
As far as I know, you dont have to install Time Machine on this OS as it is already installed for you. You only need to connect a hard drive to your computer via firewire or usb, click on the Time Machine icon, Open Time Machine Preference in the drop down menu and select a disk: your connected hard drive.
You can of course reformat this connected device, partition it into a few volumes to organise data if you so wish.
I find it strange that your mac's hard drive is divided into two volumes... perhaps this was created through bootcamp?
You can access the configuration of your hd through Applications/Utilities/Disk Utilities.
Clicking on one of the icons on the right hand panel will bring the details of the contents of your hardDrive and volumes. From there you can decide to erase a partition, reformat etc....
If your hd contains more than one volume, and one of them is empty, you could decide to remove it. Back up all your important data before doing so.
Hope this helps
WN -
Someone have problems with iphone 5 flash dark photos
Someone have problems with iphone 5 flash dark photos
http://support.apple.com/kb/HT2101?viewlocale=en_US
It is normal for it to get warm when it's being used, especially if it is hot outside. It can even get uncomfortably warm. As long as it is not causing you physical harm (as in giving you burns) or displaying a temperature warning, then it's normal behavior. It's like taking your laptop outside and using it. Except the laptop will probably burn you. -
Is there a fix for the connectivity problems with iPhone 5S and ISO 7.0.2?
Is there a fix for the bluetooth connectivity problems with iPhone 5S and ISO 7.0.4?
I am having problems connecting the BT Audio and the handsfree phone connectyion is unreliable in 2012 Mitsubishi Lancer XL.
All worked OK with ISO 6.Hello CraigNicholson
You would need to sync with iTunes to get that process to work for you. Check out the article below for more information on how to resolve that issue to get the proper token to use Push Notifications again.
iPad and iPod touch: Unable to use YouTube or Push notifications
http://support.apple.com/kb/ts3305
Regards,
-Norm G. -
Problem with displaying picture.
I use PS-CC and LR5.on a HP i7 computer and windows 7.Camera D-800, pictures in raw.
I usually import pictures in nef in LR5,. After some corrections, I export my pictures to DNG format. I sometimes do a little bit of work in camera raw then go into Photoshop.
My problem: When in photoshop, I get a grainy version of my photo which wasn't the situation in LR5 or Camera raw, Hard to work with. The grains will disappear when I enlarge the picture but then I have to enlarge it so much that I only see or can work with only part of my picture. The problem does not appear in CS6.
Hope somebody can help me.
Thanks
Jacques LegaultI should clarify this.. When I import photos into LR5, I always use copy as
DNG. I know that NEF and DNG are the same for photoshop and I always shoot
in raw.
One thing I do not know is how to do a screen shot. I will get back tro you
on that. When I say grain, or noise if you like, I mean that, if i relate
to films, my picture in LR5 would be at ISO 100 and my screen shot in
photoshop would look like it was boosted to 1200 or worse.
See you soon I hope with a screen shot.
2014-06-14 13:43 GMT-04:00 twenty_one <[email protected]>:
Problem with displaying picture. created by twenty_one
<https://forums.adobe.com/people/twenty_one> in *Photoshop General
Discussion* - View the full discussion
<https://forums.adobe.com/message/6458682#6458682> -
I HAVE PROBLEM WITH IPHONE MIC
I HAVE PROBLEM WITH IPHONE MIC
Hi Modular747,
I admit that I cannot be sure that we have the same problem.
But saying that it is not likely to be a design issue (or an issue for a specific batch) because you know 30 people without this issue, is also not really sustaining....
The specific issue is that the mic is not working when having a phone call, but that it is working with other apps (like voicerecording) also putting the phone on the speaker works.
Obviously you are a experienced moderator of this forum and you might even have connections within Apple Support. So in spite of reprimand me, it would be nice to get a solution for this issue, which apperently many iPhone4 users suffer reading these posts....
https://discussions.apple.com/thread/3402377
https://discussions.apple.com/thread/3405180
https://discussions.apple.com/message/17815737#17815737
Thanks in advance for your solution.
Maybe you are looking for
-
Tried to restore my ipod classic on a windows computer... there was some sort of failure and it is now stuck in "disk mode." The ipod is no longer being recognized by itunes.
-
i have an old 4th gen nano, that i have had previously synced to itunes, i have now got a new computer and i am trying to sync my nano to my new computer without losing all of my music from my nano, itunes keeps saying that the reason is that it is s
-
Event Handling in an Array of TextField
I have created an array of textfields (say t[0],t[1],t[2],....) and want to implement the FocusListener Interface. I want to use the method focusLost() to get the name of the textfield in the form t[x] whenever the event occurs in the field. Can I do
-
How is it possible to get list of VIs from executable?
Hi! Simple question. I have executable (builded with LabVIEW, of course). In LabVIEW 8.0.1 - based application I able to get list of VI inside of executable (with ..\LabVIEW 8.x\vi.lib\Utility\libraryn.llb\Get VI Library.vi) But if application was bu
-
Coding for selecting a specific data
i have a table with n records where email id is 1 field. In this table i have email id records. i want logic and coding for the following 1. the mail id should be printed only once in the screen followed by its contents.