Problems With iPhone after updating to Software Version 1.0.1

I recently installed software version 1.0.1 and my iphone has had problems ever since. problems i have noticed is that when you press the lock button it takes about 2 seconds to respond, the same goes for when i try to unlock the phone. I have also noticed that when im making a call the screen freezes. I have tried restarting it through itunes and it still gives me problems...

I would recommend doing a reset of the iPhone, and perhaps a restore. If it continues to do that, call Apple for support.
To do a reset:
http://docs.info.apple.com/article.html?artnum=305740
To do a restore:
http://docs.info.apple.com/article.html?artnum=305744
To call Apple for support:
1-888-MY-IPHONE

Similar Messages

  • Problem with iphone after update

    Hey guys, I am having a bit of bother with my iphone. Basically i was given an iphone 3g and I'm not really sure where it came from but it had a vodafone sim, I am on an orange contract so i took out the vodafone sim and put the orange one in and to my surprise it worked,  it has been working fine for months but tonight I decided to do an update on itunes and now it is telling me that the "sim card in this phone does not appear to be supported" and and my phone is stuck on a screen with the usb cord and the itunes logo telling me to connect it, also i can only make emergency calls. What on earth have i done? I no longer have the original sim so cant use that to activate it
    Is there any way to fix this? I had no idea doing an update would cause this trouble and atm my phone is useless.
    Any help would be very much appreciated,
    Cheers
    Tors,

    The problem also appeared for some people after updating to 7.0, and for some after updating to 6.1.3, or 6.1.2, or to 5.1, 5.0, etc. and some first saw it without updating at all. Which argues against it being a software problem with 7.1 specifically.
    Restore your phone using iTunes and set it up as a new phone. It you still have the problem it is a hardware failure.

  • HT1933 I am facing problems with mails after update iPhone 4S/io7. I have configured yahoo mail in iPhone 4S. When I click on refresh, it shows new mail downloaded but when I go inside inbox the new mail don't show up. Can anyone help me with this iOS 7 i

    I am facing problems with mails after update iPhone 4S/io7. I have configured yahoo mail in iPhone 4S. When I click on refresh, it shows new mail downloaded but when I go inside inbox the new mail don't show up. Can anyone help me with this iOS 7 issue ?

    Hi were you able to resolve yours?
    I was very worried losing all my medical stuff on my iPad Air 2, plus i have nothing to use for the next day! So i have to try all the possible things i read on the internet!! And this worked on my part (Thank God, and thank you Google)
    Perform a hard reboot
    Hold down the Home button and Power button on your iPhone or iPad and keep holding them until you see the Apple logo. Once you do, you can let go. When your device boots back up, go ahead and check to see if the apps have started re-downloading. If they still appear to be stuck, continue on.

  • IPod freezes after updating to software version 1.2!!!

    iPod freezes after updating to software version 1.2!!! After installing version 1.2 the "do not disconnect" screen took forever to disappear, so i just removed the cables and it still remained
    like that, i restarted it manually, but now it's getting stuck when the apple logo appears...i reset it and when i finnally turns on, and i'm at the language tab, it freezes. can anyone help.!?

    Apple just released firmware 1.2.1 for the ipod, you should try restoring your iPod again with that.

  • HT1589 problems with itunes after updating..can't locate some of my songs..some have an exclamation point beside them how do i get these songs back in my itunes

    I'm having problems with itunes after updating. I've lost all my playlists,,finally played around with it and got the songs back but some have an exclamation point beside them and can't be located. they are songs i've purchased. I'm not very computer literate so this is a major problem. I have spent hours with this. I just want all my songs to play even though I'm not happy that I have to recreate my playlists. It would be so much easier if I knew and understood how to correct this. Has anyone else had this problem and if so..is there an easy way to correct it?

    Not sure how this is an ipod touch question.
    Perhaps you should post in the itunes forum.

  • I am having problem with iMessage after updating my 5s to iOS 8.0.2

    I am having problem with iMessage after updating my 5s to iOS 8.0.2. I cannot send any text by iMessage anymore. My friend tries to text me and it did not go through

    Hello Huyen,
    Thank you for using Apple Support Communities.
    You can use the following article to troubleshoot Messages:
    iOS: Troubleshooting Messages
    Regards,
    Jeff D. 

  • My iPhone 5 hanged after updating new software version

    My iPhone 5 hanged after updating new software version

    paulette3163 wrote:
    When I plug my phone into my laptop and open itunes,
    Make sure you have the Latest Version of iTunes Installed on your computer ( v 11.1)
    iTunes free download from www.itunes.com/download

  • HT201210 error 3014, can't restore iPhone after updated the new version of itune

    after updated the new version of itunes, my iphone can't back up and restore.
    Why everytime update the new version of itunes have problem????

    See Network connection or download errors
    Error 1479: This error occurs when trying to contact Apple for an update or restore. Quit iTunes, disconnect from USB, restart the iOS device, reconnect the device to the computer, then launch iTunes and attempt to update or restore again.
    Error 1639: See this article for resolution.
    Errors 3000-3999 (3004, 3013, 3014, 3018, 3164, 3194, and so on): Error codes in the 3000 range generally mean that iTunes cannot contact the update server (gs.apple.com) on ports 80 or 443.
    Update to the latest version of iTunes.
    Verify the computer's date and time are accurate.
    Check that your security or firewall software is not interfering with ports 80 or 443, or with the server gs.apple.com.
    Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
    An entry in your hosts file may be redirecting requests to gs.apple.com (see "Unable to contact the iOS software update server gs.apple.com" above).
    Internet proxy settings can cause this issue. If you are using a proxy, try without using one.
    Test restoring while connected to a known-good networ

  • Problems with bookmarks after update to version 16

    My bookmarks used to appear in the bookmark drop-down menu but now are only available in the bookmark sidebar. I have tried the reset to default option. I have tried deleting the places.sqlite file and the localstore.rdf file from the profile, but no change. Should I also try deleting the places.sqlite-shm and places.sqlite-wal files??
    How can I get my bookmarks back to where they were?
    Also, I am unable to export bookmarks to html -- goes through the motions, but no file is created.

    Problems with bookmarks and history not working properly can be caused by a corrupted places.sqlite database file.
    You can check for problems with the places.sqlite database file in the Firefox Profile Folder.
    *http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
    *https://support.mozilla.org/kb/Bookmarks+not+saved#w_fix-the-bookmarks-file
    You can try to check and repair the places database with this extension:
    *https://addons.mozilla.org/firefox/addon/places-maintenance/

  • Problem with sound after updating to ios 7.0.6

    Help!
    No sound whatsoever from the speaker after updating to ios 7.0.6.
    Sound from earplugs & through dock OK.
    I tried everything I found on the web, but nothing worked up till now.
    Tips, anybody?

    Hi singsingsarah,
    Thanks for visiting Apple Support Communities.
    Be sure to try all of these steps if you do not hear sound from your iPhone speakers:
    If you do not hear sound from the built in speaker, try these steps:
    Verify that the volume is set to a level you would normally be able to hear.
    Ensure that there is nothing plugged in to the headset jack or the dock connector.
    If the iPhone is in a protective case, make sure that the speaker port isn't blocked by the case.
    Make sure that the speaker and dock port aren't clogged with debris. If necessary, clean it with a clean, small, dry, soft-bristled brush. Carefully and gently brush away any debris.
    If an audio issue occurs when using a specific application, try testing other applications to see if the issue persists.
    If the iPhone is paired with a Bluetooth headset or car kit:
    Try turning off Bluetooth.
    If you experience difficulties with the Bluetooth feature, follow these troubleshooting steps.
    Restart the iPhone.
    If restarting doesn't fix the issue, ensure that your iPhone is updated to the latest version of iOS.
    If the issue is not resolved after restoring the iPhone software, please contact Apple Support.
    You can find the article with these steps here:
    iPhone: No sound or distorted sound from speaker
    http://support.apple.com/kb/ts5180
    Best,
    Jeremy

  • Problems with publishing after updating to iWeb 1.1.2

    I get the following message after updating to iWeb 1.1.2:
    Can't create the file “shapeimage1_link0.png.” The disk may be damaged, full, or you may not have sufficient access privileges.
    I guess my disk could be damaged, but it seems odd that it worked yesterday before the update and not today (I have the same access priveledges as before). Is there anyway I can get around this problem? I also have the newest Apple updates (10.4.8).
    I get the same message if I try to publish to a folder or try to publish to .mac.
      Mac OS X (10.4.8)  

    I am still having the problem after uninstalling 1.1.2 and resinstalling iWeb and then upgrading to 1.1.1. I followed the directions. I still find it strange that it worked prior to the upgrade but not after. However, reverting to the old version has not fixed the problem.
    Could it be something with OS X 10.4.8? That was also upgraded at the same time.
    I even deleted my blog entry (the only thing that changed since my last time publishing) and that did not fix the problem. Thus, I cannot publish the same web page in 1.1.1 that I could last week. I have run the disk utility and repaired permissions. I am not sure what to try.
    Has anyone used other software in which I could take all the pages I have created and modify them in another program? I don't mind learning a new program, but I don't want to lose everything I have. I figure it will be easier to figure out a new program if I am tweaking already existing html files.
    Adobe GOlive? A macromedia program?

  • Problem with screen after update

    hello,
    I have a BB Passport and I have a problem after the last software update OS 10.3.1.1565
    - the screen is flashing when i go into an application... This happens randomly... not every time. First I had this problem with Evernote. I erased everything from my phone and I performed a full wipe (factory reset). The problem is not solved. now is happening more often... when I go to settings, when I open an app... and so on. Usualy is flashing white screen, but last night when I wanted to watch a video, it flashed green screen...
    Is there a way to solve this problem? Is this a software problem? Or I have to replace my screen?

    http://www.blackberry.com/btsc/KB36757
    There is a fix, though not officially released yet by BlackBerry:
    http://forums.crackberry.com/bb10-leaked-beta-os-f​395/os-10-3-1-2480-upgrade-files-passport-only-100​...
    1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
    2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

  • Problem with sound after update

    Hello
    After update to 11.3 I have no bass sound in subwoofer in Firefox browser (youtube). I uninstall the newest version and install previous (11.2) and bass plays ok.
    My os: Windows 7 x64. Sound card Creative X-fi.

    Hello!
    My problem is summed up in this topic.
    Updated Flash Player with 11.3 this morning (june 12th 2012) and since then my 7.1 Sound System works only 2.1. If i enable EAX Effects, works on 7.1 but since it`s just a room it sounds very odd.
    I have no problem with sound on HTML 5 websites for that matter, Winamp, Video Players, games.
    Uninstalled Flash Player, sounds work ok without it on different browsers, other than Chrome (since it has FP built in).
    I hope for a sollution soon.
    Thank you.
    *edit*
    Untill there is a permanent solution, i found a way to deal with my issue and i hope it will help others.
    I personally use Chrome and this is for this browser:
    1. Type "about:plugins" w/o the quotation in the navigation bar.
    2. On the upper right u will see "Details" click it then find the word "flash", and you will see something like this:
    Flash (3 files) - Version: 11,3,300,257
    Shockwave Flash 11.3 r300
    Name: Shockwave Flash
    Description: Shockwave Flash 11.3 r300
    Version: 11,3,300,257
    3. I say again, this worked for me on Chrome. The 3 files i have, two of them are Version 11,3,300,257 and one is 11.2.31.144
    4. Simply disable the lates version 11.3 and enable the previous version 11.2
    I hope this helps.
    Message was edited by: AndrewPAM

  • IOS 8.1.3 problems with email after update

    Hi i have problems accessing my email accounts after update to iOS 8.3.1 , I tried to delete all accounts but I still have the same problems.

    Hello, so, I was having the same issue including my memory showing 0 GB available. I tried all of these suggestions and couldn't make it work, here's what finally worked for me:
    on your Iphone, Go to Settings > iCloud > Find My Iphone and Turn it OFF.
    That worked for me and now shows the free GB I truly have left and no longer have issues with my email. Hope this helps if it does please let me know and pass it along.
    Thank you :-)

  • Problems with PDFs after update

    I recently updated my Pixi's software to Palm WebOS version 1.4.5 with the Verizon 1.4 configuration.  Now when I try to open a PDF that had previously been operating without any problems, I get a "Render Document Failed" error, and the viewer shuts down. I tried deleting and re-loading the document.  I am getting the problem with other documents also, where i did not have them before the update.
    Are there any fixes for this?
    My searches of the forums haven't given me much hope.
    Thanks in advance.
    Post relates to: Pixi Plus p121vzw (Verizon)

    I have the same problem, hopefully someone can shed some light on this.

Maybe you are looking for

  • Help finding deleted emails

    I am a new user to Mail 5. I had imported all of my mail boxes and emails from Entourage -- several years worth. Subsequent to that I have switched ISPs which required some adjustments to how email accounts were accessed. I had continuing problems wi

  • Follow These Steps To Lose Sound Effects On 10.5.8

    I can lose sound effects on Mac OS X 10.5.8 by following these steps. Can anyone else also lose their sound effects? This problem has existed for me on 10.3, 10.4, and 10.5. Is there a daemon I can restart that will restore sound effects without a re

  • OC Crashed (I Think)

    So this is what's happened so far: I took an old Blackberry Pearl 8220 flip phone with no battery and ordered a battery for it online. When it arrived and I put it in, the same thing happens. It powers on momentarily, displays an analog clock icon fo

  • Help with PageMaker 7.0, Transparent Backgrounds, and Feathering in Photoshop CS5

    Hi all, I am hoping  someone here can help me out with a problem that I've been having for  more than a week that I can't seem to figure out and it's driving me  crazy. I have a friend who's trying to put together a  graphical instruction manual usin

  • ExecuteQuery throws InternalQueryException when KeywordQuery.SelectProperties on Managed Property of type 'Double FloatingPoint'

    Hi, I have setup a Managed Property of type 'Double Floating Point', and mapped to a crawled property. When I issue the following code,                  KeywordQuery keywordQuery = new KeywordQuery(siteCollection);                 keywordQuery.QueryT