Problems with isync and itunse and ical

Hello,
i can't sync my ical Calendar with my new ipod with itunes and with isync for my Nokia.
When I select in isync die Calendar, an Dialog shows: "Es wurde kein beschreibbarer Kalender gefunden".
In itunes it shows: "Kein Kalender vorhanden".
I use actualy Leopard. In ical all shows fine, in MenuCalenderClock too.
Any Ideas?
Regards Ulrich

this worked for me:
1) exporting all my calenders one by one (NOT making one backup for all calenders by "sicherungskopie")
2) closing calendar & calendar related apps
3) clearing the calender cache (user/library/cache/ical)
4) deleting the calender plist (com.apple.ical.plist --> found in users/library/preferences)
5) log out & log in
6) creating new calenders (previous names are allowed)
7) importing the old calenders from the export-files
8) opening isync/ituns

Similar Messages

Problems with iCloud and iCal

I started using iCloud about a month ago...so far it has been quite the headache. I like the concept I put an appointment on one of my devices and it shows up on the rest (iphone, ipad, iMac). Just recently, when I open iCal on my iMac, all my appointments are gone! I have to then go to System Preferences and recheck the calendar to go to iCloud. And after a bit, then all my appointments reappear. This is getting old. It's defeating the purpose of using iCloud. My question is does anyone know of a glitch that is causing this? I'm about ready to dump iCloud and go back to synching with iTunes. Thank you!

I've now sorted the calendar issue and logged out of iCloud. Thanks to this link:
http://www.wilmut.webspace.virginmedia.com/notes/movecalendars.html
No more iCloud for me...
Would still be interested if anyone else has experienced the mail bug...

Has apple addressed the problems with iCloud and iCal?

I can see there have been lots of complaints about iCal errors in trying to sync on icloud. I'm not finding any solutions to the issues that are clearly affecting a lot of people. Any one know what's going on?

final cut pro 4.5 and final cut express 3 both seem to have the same dropped frames/capture issue once you upgrade to 10.4.9, something to do with spotlight.
try this out -
http://discussions.apple.com/thread.jspa?threadID=929465&tstart=15

10.4.6 update problems with isync and idisk, and shutting down.

I downloaded the 10.4.6 update and my Idisk no longer mounts automatically after logging in. I can make it mount if I do a search for it, and then double click on the icon. Once it does mount, it will not sync when I add new files to it.
I have repaired permissions a couple of times, but it still doesn't work. I also can't shut down until I see an error message about "mirror agent". What should I do?

This is the iPod nano forum.
Don't you need to post this in the Tiger Forum?

My syncron with isync and sony erikson k700i failes

Hey...
I just got at k700i and in the beginning i worked fine with isync but then suddently i startet to fail every time i tryed... I dont think I have changen any thing but the name of the phone... Do anybody know what there can be wrong?
The computer write:
[MH-Phone] Connection to the phone failed.
Please make sure that your phone is turned on. If this error occurs again, please restart your phone.
Device "MH-Phone" synchronization failed
The phone write:
session failed
communication got disconnected
I really hope some one can help...

This is a known problem with iSync 2.2 and has been the subject of a number of threads on here already.
A possible solution is here:
http://mobile.feisar.com/k700isync22hack.html
BE WARNED, that this is a hack, and requires direct editing of files within the iSync application. DO NOT attempt this hack if you are not at all competent in doing so. It is very possible to break iSync if you are not careful.
If you decide to proceed, make sure you do adequate backups before starting. Then read ALL the instructions VERY carefully and fully a couple of times before going ahead.

Problem with JFrame and busy/wait Cursor

Hi -- I'm trying to set a JFrame's cursor to be the busy cursor,
for the duration of some operation (usually just a few seconds).
I can get it to work in some situations, but not others.
Timing does seem to be an issue.
There are thousands of posts on the BugParade, but
in general Sun indicates this is not a bug. I just need
a work-around.
I've written a test program below to demonstrate the problem.
I have the problem on Solaris, running with both J2SE 1.3 and 1.4.
I have not tested on Windows yet.
When you run the following code, three JFrames will be opened,
each with the same 5 buttons. The first "F1" listens to its own
buttons, and works fine. The other two (F2 and F3) listen
to each other's buttons.
The "BUSY" button simply sets the cursor on its listener
to the busy cursor. The "DONE" button sets it to the
default cursor. These work fine.
The "SLEEP" button sets the cursor, sleeps for 3 seconds,
and sets it back. This does not work.
The "INVOKE LATER" button does the same thing,
except is uses invokeLater to sleep and set the
cursor back. This also does not work.
The "DELAY" button sleeps for 3 seconds (giving you
time to move the mouse into the other (listerner's)
window, and then it behaves just like the "SLEEP"
button. This works.
Any ideas would be appreciated, thanks.
-J
import java.awt.BorderLayout;
import java.awt.Cursor;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import javax.swing.JButton;
import javax.swing.JFrame;
import javax.swing.JPanel;
import javax.swing.SwingUtilities;
public class BusyFrameTest implements ActionListener
private static Cursor busy = Cursor.getPredefinedCursor (Cursor.WAIT_CURSOR);
private static Cursor done = Cursor.getDefaultCursor();
JFrame frame;
JButton[] buttons;
public BusyFrameTest (String title)
frame = new JFrame (title);
buttons = new JButton[5];
buttons[0] = new JButton ("BUSY");
buttons[1] = new JButton ("DONE");
buttons[2] = new JButton ("SLEEP");
buttons[3] = new JButton ("INVOKE LATER");
buttons[4] = new JButton ("DELAY");
JPanel buttonPanel = new JPanel();
for (int i = 0; i < buttons.length; i++)
buttonPanel.add (buttons);
frame.getContentPane().add (buttonPanel);
frame.pack();
frame.setVisible (true);
public void addListeners (ActionListener listener)
for (int i = 0; i < buttons.length; i++)
buttons[i].addActionListener (listener);
public void actionPerformed (ActionEvent e)
System.out.print (frame.getTitle() + ": " + e.getActionCommand());
if (e.getActionCommand().equals ("BUSY"))
frame.setCursor (busy);
else if (e.getActionCommand().equals ("DONE"))
frame.setCursor (done);
else if (e.getActionCommand().equals ("SLEEP"))
frame.setCursor (busy);
try { Thread.sleep (3000); } catch (Exception ex) { }
frame.setCursor (done);
System.out.print (" finished");
else if (e.getActionCommand().equals ("INVOKE LATER"))
frame.setCursor (busy);
SwingUtilities.invokeLater (thread);
else if (e.getActionCommand().equals ("DELAY"))
try { Thread.sleep (3000); } catch (Exception ex) { }
frame.setCursor (busy);
try { Thread.sleep (3000); } catch (Exception ex) { }
frame.setCursor (done);
System.out.print (" finished");
System.out.println();
Runnable thread = new Runnable()
public void run()
try { Thread.sleep (3000); } catch (Exception ex) { }
frame.setCursor (done);
System.out.println (" finished");
public static void main (String[] args)
BusyFrameTest f1 = new BusyFrameTest ("F1");
f1.addListeners (f1);
BusyFrameTest f2 = new BusyFrameTest ("F2");
BusyFrameTest f3 = new BusyFrameTest ("F3");
f2.addListeners (f3); // 2 listens to 3
f3.addListeners (f2); // 3 listens to 2

I've had the same problems with cursors and repaints in a swing application, and I was thinking of if I could use invokeLater, but I never got that far with it.
I still believe you would need a thread for the time consuming task, and that invokeLater is something you only need to use in a thread different from the event thread.

Problem with installing and running some applications or drivers

When installing and installing some items, towards the end of the installation I get this message:
/System/Library/Extensions/comcy_driver_USBDevice.kext
*was installed improperly and cannot be used. Please try reinstalling it or contact product's vendor for update*
The end result is that some things do not seem to work properly, such as my HP printer. Would anybody have any ideas on how to fix this problem?

Thank you for your response. Originally, I had a problem with Airport and ended up reinstalling Snow Leopard. Since then, when downloading upgrades etc, such as HP printer drivers, iTunes etc., towards the end of the download when its running the script, I get this message: /System/Library/Extensions/comcy_driver_USBDevice.kext
+was installed improperly and cannot be used. Please try reinstalling it or contact product's vendor for update+
Sometimes, the download hangs and is unable to complete. The main problem I've encountered so far with an application is when I use the printer to scan an image via Preview, it's blank: there's nothing there.

Problems with outlook and address book contacts: my outlook contacts had around 3,000 entries. Outlook duplicated by itself and now outlook and address book have each over 340,000. What should I do?

Problems with outlook and address book contacts: my outlook contacts had around 3,000 entries. Outlook duplicated entries and have now 340,000. I reinstalled microsoft office and, thus, outlook, and reinstalled mac OS X system and applications. While I managed to delete outlook contacts so that I can re-sync with my blackberry, the contacts at Mac Address Book were not deleted and still have over 340,000 entries. I do not mind deleting all contacts since I have back up, but I have not been able to delete them. Also, when I go at Address Book and try to delete or merge duplicated entries, the system takes forever and never ends because of such large amount of entries. Worse, when I do so I run out of RAM memory.
My Macbook pro is just 2 months old.
What should I do? Is there a way to delete my Mac Address Book without having the problem above?
Many thanks
Regis

zlatan24 wrote:
For solving out troubles connected with corrupted or lost address book you may use address book recovery. It owns various features such as restoring wab files, it working under any Windows OS. The utility has modern and easy to use interface due to almost every experienced users.
If it is a windows problem it's not going to run on the OP's MacBook Pro

Problems with Safari and Firefox (HTTP?)

Problems with Safari and Firefox (HTTP?)
On a laptop G4, 10.5.8 and Safari 5.02 I experience the following:
On the account of my oldest daughter everything works fine, i.e. wireless internet works and no problems with mail or safari.
On the same laptop, on the account of my other daughter, the wireless is OK, she can mail etc. But safari nor firefox works. It says: can’t find server (whatever site) and in the activity window it looks if safari tries to open files (in the safari preferences-folder) in stead of http. Same applies to Firefox, so maybe it has more to do with HTTP in general?
What goes wrong? What to do? I tried the following on the host terminal (tips from Apple)
defaults write com.apple.safari WebKitDNSPrefetchingEnabled -boolean false
and
defaults delete com.apple.safari WebKitDNSPrefetchingEnabled
but that did not help,
Nanne

I'm still wondering why it happens now at this moment in time...
PC does seem to be a bit odd & inconsistent, the few times I've tested with it, at least so far as we content filtering goes; and if I remember rightly, you're not the first to report previously ok settings suddenly preventing some or all internet until pc is switched off altogether.
It may work when re-enabled

Haven't been able to use pages for a while. Keep getting following message. Have tried reinstalling iWork, but no luck. Same problems with Keynote and Numbers/Users/scottmcdonald/Desktop/Screen Shot 2012-03-14 at 9.39.52 PM.png

Haven't been able to use pages for a while. Keep getting following message. Have tried reinstalling iWork, but no luck. Same problems with Keynote and Numbers/

Have you moved Pages from its installed location? Or just dragged a copy to your current system?
It can't find some of its resources apparently.
Peter

Problem with DMGs and error: "No Mountable File Systems"

Problem with DMGs and error: "No Mountable File Systems"
The files are not corrupt. The problem is occurring with all DMGs that are apparently formatted in MS-DOS FAT16. No the file will not mount with Disk utility or any other disk mounter programs I have found.
This is now the second time this occurred and now effects my MBP and my iMac. First time i spent days with Apple support and the only solution was ultimately back up the data, reformat the HD, start over from scratch and reload everything. That lasted about a month before the problem resurfaced and is now an issue on both iMac and MBP.
I tried to identify all the programs I installed immediately before the error, as I am convinced it is the result of a software conflict.
Recent programs includes:
1) upgrading from Parallels 5.5 to 6.0 on both machines.
2) using an HP secure II usb drive and setting up a secure disk.
3) installing new itunes 10
4) new update to Flip For Mac.
The files affected are downloaded dmgs, including personal brain and google earth, both which are formatted in FAT16.
Any help or thoughts? Apple has now spent hours trying and they say i now have to reformat and wipe and start over. That is unacceptable and based on pasted experience the problem is likely to repeat itself. having to wipe and rebuild a HD ever month is not an solution. i need to fid the root problem.
In the meantime, anyone got a real solution on how to extract the data for a DMG using a different method?
Message was edited by: remaia

Where you able to find the solution, i am having the same problem, all was fine till i install some programs only same one i saw did we both did was flip4mac i uninstalled it but the problem is still there, i also restored and erased the hardrive but im not up to doing that all over again. If you found anything out let me know i would greatly appreciate it

Problem with Send and Receive Emal In SAP System

Hi gurus!
I have a following quote:
Dear !
I have a problem with send and receive email in SAP system following :
I want to test send and receive email in local network at my company. I
had two server
Server 1 : I setup Exchange Mail Server 2007 with domain controller is
fes.com
Server 2 : I setup SAP ERP ECC 6.0
On Server 1 : I created 2 account ( u1Afes.com and u2Afes.com ) and then I tested send and receive email between u1 and u2 in local network through Microsoft Outlook 2007 -> OK
and then
On Server 2: I had configured send and receive email on SAP system
through tcode SBWP, SCOT and SOST as Note 455140 - "Configuration of
e-mail, fax, paging or SMS using SMTP"
for example :
I logged in SAP system with user Basis01 (with email u1Afes.com ) -> then,using tcode SBWP -> new message -> send to u2Afes.com with Internet Mail type and then status message with green light -> sending ok
and then I have used Microsoft Outlook 2007, I logged with account u2 ->check email -> Ok. I saw message which send from u1
Finally, My problem is how can receive mail in SAP system without using Microsoft Outlook
For example:
Login system SAP with Basis01 account (with u1Afes.com ) -> tcode SBWP ->New Message -> send to u2Afes.com
and then
Login system SAP with Basis02 account (with u2Afes.com ) -> tcode ??? ->
To receive email from Basis01 (with u1Afes.com )
Please help me now
Thanks
I replace "@" with "A" because of banning email of this forum.
This quote is about sending email in local network. And we can't receive any email from the outside email address. Addition if I wanna send email to internal email in Internet (we've just tried with email address in local network) What should I config in SAP and Exchange ?
By the way, Is SAP Server IP added to Relay Agent for sending or receiving mail ?
Regards
An NLP
Edited by: An NLP on Apr 6, 2010 7:03 PM

Hi,
This problem is a classic problem of mail routing via Exchange. Exchange like most mail servers use the domain part of the email address as a means to route mails. So I will make an assumption that your main company mail addrss is "User @ fes.com".
So when you send a mail to the "User @ fes.com mail" address the mail is delivered to your Outlook mail address as this is the default route for company.
(Q) So how do you get your Exchange server to relay the mail into the sending SAP system?
(A) The easiest way would be to setup and unique mail domain for your SAP system. I always recommend "user @ client.sid.company.com" which in your case would be "u1 @ 100.PRD.fes.com". You can then instruct Exchange to send any emails addressed to 100.PRD.fes.com domain to your SAP system. Also using this format of address you can configure multiple mail connections into multiple SAP systems.
(A) Another answer would be to enter the "Full" email address (LOcal and Domain part of address) into the routing rule for Exchange e.g. "U1 @ fes.com" so that all emails addressed to this user will be delivered into SAP. However this method requires a lot of Admin as you will have to update Exchange with ALL email address that need to receive emails. Also if your corporate mail address is "U1 @ fes.com" then all mails will be forwarded to SAP.
I would definitely NOT recommend this method but the decision is up to you.
P.S. The IP address of the SAP system is entered into the mail header of the email. This is standard practice in SMTP relay. You can suppress this header in Exchange
Hope this helps
Michael

Problem with Speaker and Headset in Windows Vista

Hi, I just got my Macbook Pro 13" and having problem with speaker and headset when working with Windows Vista (I have installed the driver from bootcamp). The sound very weak if I play music from Itunes or youtube even the volume already full and if i put my headset the sound not coming out. Is there anyone can help me to solve this problem?
Regards,Edwin

When you post about Windows / Boot Camp, in Mac Pro (workstation) forum where others with a MacBOOK would be more likely to have same hardware configuration, and you won't find Windows drivers on Apple downloads. More like at
http://www.guru3d.com or other sites, or go to RealTek (if that is the type of audio you have).

Problem with trigger and entity in JHeadsart, JBO-25019

Hi to all,
I am using JDeveloper 10.1.2 and developing an application using ADF Business Components and JheadStart 10.1.2.27
I have a problem with trigger and entity in JHeadsart
I have 3 entity and 3 views
DsitTelephoneView based on DsitTelephone entity based on DSIT_TELEPHONE database table.
TelUoView based on TelUo entity based on TEL_UO database table.
NewAnnuaireView based on NewAnnuaire entity based on NEW_ANNUAIRE database view.
I am using JHS to create :
A JHS table-form based on DsitTelephoneView
A JHS table based on TelUoView
A JHS table based on NewAnnuaireView
LIB_POSTE is a :
DSIT_TELEPHONE column
TEL_UO column
NEW_ANNUAIRE column
NEW_ANNUAIRE database view is built from DSIT_TELEPHONE database table.
Lib_poste is an updatable attribut in TelUo entity, DsitTelephone entity, NewAnnuaire entity.
Lib_poste is upadated in JHS table based on TelUoView
I added a trigger on my database shema « IAN » to upadate LIB_POSTE in DSIT_TELEPHONE database table :
CREATE OR REPLACES TRIGGER “IAN”.TEL_UO_UPDATE_LIB_POSTE
AFTER INSERT OR UPDATE OFF lib_poste ONE IAN.TEL_UO
FOR EACH ROW
BEGIN
UPDATE DSIT_TELEPHONE T
SET t.lib_poste = :new.lib_poste
WHERE t.id_tel = :new.id_tel;
END;
When I change the lib_poste with the application :
- the lib_poste in DSIT_TELEPHONE database table is correctly updated by trigger.
- but in JHS table-form based on DsitTelephoneView the lib_poste is not updated. If I do a quicksearch it is updated.
- in JHS table based on NewAnnuaireView the lib_poste is not updated. if I do a quicksearch, I have an error:
oracle.jbo.RowAlreadyDeletedException: JBO-25019: The row of entity of the key oracle.jbo. Key [null 25588] is not found in NewAnnuaire.
25588 is the primary key off row in NEW_ANNUAIRE whose lib_poste was updated by the trigger.
It is as if it had lost the bond with the row in the entity.
Could you help me please ?
Regards
Laurent

The following example should help.
SQL> create sequence workorders_seq
2 start with 1
3 increment by 1
4 nocycle
5 nocache;
Sequence created.
SQL> create table workorders(workorder_id number,
2 description varchar2(30),
3   created_date date default sysdate);
Table created.
SQL> CREATE OR REPLACE TRIGGER TIMESTAMP_CREATED
2 BEFORE INSERT ON workorders
3 FOR EACH ROW
4 BEGIN
5 SELECT workorders_seq.nextval
6    INTO :new.workorder_id
7    FROM dual;
8 END;
9 /
Trigger created.
SQL> ALTER SESSION SET NLS_DATE_FORMAT = 'DD-MON-YYYY HH24:MI:SS';
Session altered.
SQL> insert into workorders(description) values('test1');
1 row created.
SQL> insert into workorders(description) values('test2');
1 row created.
SQL> select * from workorders;
WORKORDER_ID DESCRIPTION                    CREATED_DATE
           1 test1                          30-NOV-2004 15:30:34
           2 test2                          30-NOV-2004 15:30:42
2 rows selected.

Problem with ADS and LDAP

Problem with ADS and LDAP
I have installed Win2000 + sp1 and ADS on a computer. This computer is PDC.
After connection via LDAP I cann't get any object ( users or goups etc. ).
I try connect to ADS by java ( JNDI ).
When I use another clients of LDAP ( eg. Maxware Directory Explorer) I have
the same problem - no objects.
Can anybody help me?
Grzegorz Pszona
my e-mail: [email protected]

Thanks a lot.
Softerra's browser is really good.
Thanks
Rashmi
"Anant Kadiyala" <[email protected]> wrote:
>
I used Softerra's LDAP browser. The browser is free. There is also a
java baded
LDAP browser from Univ of Michigan. I found the Softerra browser to be
more easier
to use.
-anant
"rashmi" <[email protected]> wrote:
Hi,
Can you please let me know which exact ADS tool that you used to examine
the
DN. I have Active Directory Users and Computers, Sites and Servicesand
Domain
and Trusts installed on my machine but I am not able to figure out how
to get
the DN?
Thanks
Rashmi
for Stephen Davies <[email protected]> wrote:
Grzegorz,
I have had WLS6.1 & ADS working ok using LDAP V2. Mind you it did take
a
fair bit of messing around to get it going. MS does have a few oddities,
for example the Administrators DN might look something like this:
cn=Administrator,cn=Users,dc=eglobal,dc=net
One tool that I found invaluable came with the additional support tools
for Windows 2000. The 'Active Directory Administration Tool' made it
easy to list the directory contents and examine the DNs.
Regards,
Steve
Stephen Davies
Principal Consultant
eGlobal Services Pty. Ltd.
Sydney, Australia
Ph. +61 2 9283 1033
http://www.eglobal.net/

Problems with isync and itunse and ical

Similar Messages

Maybe you are looking for