Problems with itunes 10 and external hard drive

Hi
I was recently forced to change the internal hard drive on my G5 Tower, and the external hard drive where I keep my music library.
The new external drive had all my music files copied to it. I reloaded my itunes library files (that I had backed up from old computer) into my music folder and I named the new external drive as the media folder in Itunes preferences. The first time I used itunes it asked me if I wanted it to locate all files to which I pressed OK. itunes quickly found the majority of files and I cleaned up / organized the small mess left behind.
Trouble is a few problems have occurred. Firstly, itunes seems slow – there’s a sluggish pause flicking between tracks – where as before it used to snap into response. Occasionally I’m asked to locate files which I thought was a task it had already done - and every now and again when I check the external hard drive music library I find files have been moved from there album locations to ‘untitled’ folders, etc. I can only assume itunes is doing this. I’ve also noticed I can’t remove the external hard drive from the desktop without closing itunes first which never happened before.
This is getting somewhat frustrating. Can anybody advise?
Much appreciated.
K

Hi Nick,
Avoid the WD files completely, not needed & often a problem.
You need to erase the Drive, & to use it on both Format it MS-DOS/FAT32, on the Mac or PC, but will have a 4 GB filesize limit, as well as other limitations.
One option not mentioned yet is MacDrive for your PCs... allows them to Read/Write & Format HFS+, so no need to reformat it...
http://www.mediafour.com/products/macdrive/

Similar Messages

Problem with itunes and external hard drive

I've have recently downloaded the newest version of itunes, I also have an external hard drive with 40gbs of music on.
When I open itunes preferences and set library to an external one, none of my music copies to itunes.
I have tried to individually copy music folders to itunes, but my whole mac freeze's
Any advice please?

You might find this article useful: iLounge - Managing your iTunes Library on an External Hard Drive

Problem with iTunes and external drive

I moved my files to an external hard drive months ago but apparently forgot to uncheck the auto synch button. It seems that I just managed to copy them all back to my computer hard drive where I now only have 6gb. Since I originally moved the files I have put some movies and a little music on the computer and have iPad files in the mix. How to I get it all synched so that I know I have everything and then delete it from my hard drive?
I then would like to add some new CDs to the IPod, but do not want them stored on my computer drive, just external drive.
Please feel free to treat me like I am clueless because I am. Once I burned my entire Cd collection and moved it I have not done anything else with iTunes except buy the occasional app.
Thanks in advance for the help.
I was trying to follow directions on another post which did not seem to fit so I began trying random things. Very bad idea!
Cyndi

Nevermind. I figured it out.

Problem; itunes and external hard drive

I saved my musics to my external hard drive and imported them to my itunes library, and tried to modify their tags, but everything in info section was inactive and couldn't be modified. but once i move the file to internal drive, it works fine no matter where it is stored afterwards. what's the problem here? I've already tried deselecting the read-only attribute.

You would have to change the tags while working inside the external drive. Then when you look at them through iTunes you will see the changes that you made.

Problem running Itunes from external hard drive- Please Help!

So, last night I transferred my entire music folder over to an external hard drive. It copied all the files and I then proceeded to tell itunes where my new music folder was located. The problem I ran into was when I actually deleted the music files from my internal hard drive my library won't automatically find the files. When I click on a song it comes up with an error message saying, "original file cannot be found, would you like to locate file?". If I tell it yes, I can then manually tell it where the file is, and it will play. I'm really hoping there is an easier way around this issue because going in and doing this for every song in my library would take years. Should I clear out the library and then drag it from the external hard drive? Any help would be greatly appreciated. Thanks a lot.
Sean

I am experiencing a similar problem. I already had all my files on an external drive, where I had transfered them a few months back, and everything was working fine. I have now moved them, again, to a larger external drive, did everything the same, but now receive the message "original file cannot be found, would you like to locate file?" I was advised to use the "add to library" button under "FILE" in the menu bar and all the music was finally imported into iTunes, but the problem now is that the new data on the music files is missing all the metadata, and I am still stuck with all the original files with the "!" in front of each file that is going to have to be manually deleted one file at a time, all 30,000 of them. I would like a way to start over and get it right the first time. Anyone have any solutions? I have found a program, "Super Remove Dead Tracks" which should solve the problem of eliminating the "!" tracks, but so too all the metadata. Ideally I'd like to be able to locate the original files with all the attached metadata and get back to where I was 24 hours ago.

Working with itunes on external hard drive.

Dear all,
I was wondering is there anyway in which i could store all my music on a external hard drive, because i have too much now on my computer and have run out of space, could i move it over and then work with it from there and still be able to view it in itunes and update my ipod etc?
Many Thanks
Lyon.
iMac, Macbook Mac OS X (10.4.8)

Lyon
Yes there is. Just follow the instructions here:
http://docs.info.apple.com/article.html?artnum=301748
Regards
TD

Help: itunes and external hard drive

I bought 2 TB Seagate external hard drive just so I can put all my music/movies/tv shows on it so I can free up space on the laptop. I followed these instructions from Apple's website... http://support.apple.com/kb/HT1364
What I've read was after the above was done I could hook up the external, hook up my iphone and I would be able to use itunes as I normally would b/c it was getting my music (& stuff) from the external but I could never do it. Last night everything kept giving me the exclamation point and saying it couldn't locate the file. I tried to load the music from the external to itunes so I did that in itunes with add file/folder to itunes and it duplicated a lot of my music BUT I was able to play some of the files. So I started deleting the exclamation point ones and this morning I was going pick up where I left off and it has been nothing but ****. Nothing would play and itunes kept not responding. So I uninstalled itunes (exactly how apple website said too) thinking and praying I might start from scratch b/c at this point I was boiling and I was done. So now after reinstalling itunes it is still not responding and nothing will play.
My hard drive still shows all the files but won't play.
I was simply trying to save space but simple is not what i've got!!!!!!
Thanks- Megan

Windows is probably changing the drive letter of the exHD after you plug in the ipod. Isn't that nice, it can do that without telling you?
For instance you started ituens and made the library while the exHD was F:
Then you plug in the ipod and the windows changes it so the ipod has F:
Now itunes is lost so you get the !
You need to assign the drive letter to be permanent on the exHD. Use windows disk manager.
You an also assign a permanent drive letter to your ipod.
My advice is to pick letters far down in the alphabet.
This page has drive letter directions
http://support.apple.com/kb/TS1493

I use only two channels, have plenty of memory in my hard disk, and external hard drive, no effects, and still having problems with Garage band. Giving messages as you have too many live channels

I'm frustrated, I am doing everything you recommend, I use only two channels, have plenty of memory in my hard disk, and external hard drive, no effects, and still having problems with Garage band. Giving messages as you ave too many live channels, the disk is slow prepare...can you help?

Quote from: Richard on 15-November-07, 20:33:05
tornado2003,
What you need to do is boot into Safe Mode. Then delete the VGA Drivers.
After that boot normally and install the latest nVidia ForceWare Drivers
Take Care,
Richard
i guess you missed that:
Quote from: tornado2003 on 15-November-07, 17:26:52
ive tryed booting xp in safe mode but it just freezes after it loads up a couple of needed files .
ive even formatted my hard drive and tryed installing a fresh xp on it but it just keeps locking up when it gets to the "starting windows setup" .(this is just after it loads all the drivers from the xp cd)

ILife with both internal and external hard drives?

I've been considering switching from a homebrew, multi-boot desktop to a MacBook for my primary computer, in part so I can hang out with my family in the living room rather than be exiled to the home office when I want to compute.
But here's my concern: I have media. We have about 50 GB of iTunes; maybe 30 GB of iPhoto; and tons and tons of digital video that would be stored in iMovie. Obviously the libraries are all interlinked. And it's all growing. I also like to rip DVDs and re-encode them for my iPod and AppleTV. Right now, my desktop has 480 GB of internal storage and that's just about enough.
I have discovered that the MacBook only comes with an option up to 250 GB. I absolutely need AppleCare, so I can't get an aftermarket hard drive. (All my Macs break - this one from the office that I'm on right now has a bum DVD drive, and my wife's has needed both fan and logic board replacements.)
While I'm aware of the existence of external hard drives, I'm concerned about Apple's non-external-hard-drive-friendly way of storing iLife data. If I wanted to keep more recent or useful music and photos on the internal drive but older stuff on an external, and still be able to use iLife seamlessly, would that be possible? (I see myself editing recent video in the living room, but then hooking back into the external HD in the office if I need older stuff.)
What solutions are out there for integrating data stores on both internal and external hard drives into an iLifestyle?
Thanks!

Sascha Segan1 wrote:
.. What solutions are out there for integrating data stores on both internal and external hard drives into an iLifestyle?
all iApps (iPhoto, iTunes, iM08) support usage of external drives as 'mass storage' devices.. you can tell all apps which drive to use for the Libraries.. there some tools out there, which even allow the usage of 2/many different Libraries in iTunes/iPhoto..
for iM in detail: the Projects are small files, and should stay internal (allthough I'm discribing a 'hack' on my site: http://karsten.schluter.googlepages.com/im08tricks Project Library (and Events) on External Harddrive); the Events (=GBs) could be located on as much ext. HDDs as you want..
but ...
all iApps are single-user .. you can NOT 'share' Libraries to 2/many different users; the idea of a 'media server' which hosts/shares all kind of data to all kind of users is not 'on concept' of iLife ..

Moving itunes from external hard-drive to another and using another comput

Hi,
This has probably been posted before but i couldn't find it.
My itunes works on another computer, with the library (Edit->Preferences->Itunes location as g:\itunes), this includes the xml files for the library.
I've now got a new laptop and external hard-drive and want to move the library onto the new hard-drive and use it on the new laptop.
I think i can copy the itunes folder from old hard-drive onto new one, then point the itunes install on the new laptop to the new harddrive and it should pick it up?
Any ideas?
Matt

Welcome to AD!
+this includes the xml files for the library.+
Does this also include the important itunes database file, the one with the ITL file extension?
If so, your idea should work. Use Windows Explorer to copy the ITL & music files/folders over to the new exHD.
Connect the new exHD to your laptop and make sure Windows sees it as drive G:
http://support.microsoft.com/kb/307844
That is a very important step. Otherwise, iTunes will lose all the paths to the music.
Now start itunes on the laptop by pressing *and holding* the shift key. Tell it to use the ITL file on the G: drive. Then set your iTunes preoferences to have any future additions go to the G: drive music folder.

How to scan my computer and external hard drives for pictures with out importing duplicates.

how do i scan my computer and external hard drives for pictures with out importing duplicates.

iPhoto doesn't scan anywhere. It imports files offered to it. If it spots a duplicate it will warn you.

My iTunes appears to be installed on my laptop (25%) and external hard drive (75%). To get it all in 1 place is it simply a copy-paste exercise for the folders?

My iTunes appears to be installed on my laptop (25%) and external hard drive (75%). To get it all in 1 place is it simply a copy-paste exercise for the folders?

Most probably, you have a 'private'-folder = part of an AVCHD-structure on your root-level of that drive.
Put it back into its folder (or any folder) - done.
Don't rip AVCHD-folders apart!

I am trying to gather all of my music into one place, but it is scattered throughout my computer and external hard drive, how can I put it all in one folder and then create one library off of it?

My first problem is that I need to get all of my music files in one folder, they are scattered throughout my computer and external hard drive and I am trying to get them all together. Afterwards I want to send this music to my microsd hard in my Samsung Galaxy s4, is there a way to proceed through this? Or at least one part of it?

Consolidate your iTunes Library
As for the other part of the question, iTunes syncs with Apple devices.
Simply copy the media desired from the computer to the microSD card. This has nothing to do with iTunes.

Problems transfering music from external hard drive to ipod.

When I plug both ipod and external hard driver (WD 1600B014) into my Gateway laptop, only 1 device will work at a time with the other saying "usb device not recognised". This means I am unable to copy selected itunes songs onto my ipod.
This is driving me insane as I have 60gb of music on my hard drive which I want to chop and change frequently.
I have tried all manner of solutions including buying a powered usb hub (belkin) and starting a clean sheet with my laptop, installing all manner of new drivers for the usb ports.
I have the same problem with my 5G ipod 40gb.
I have tried the same problem on my dads desktop computer and the same problem arrises.
Does anyone have any answers as this has been driving me mad for ages and ages.
Is this a common thing or is it a problem with Western digital hard drives (although i thought they were a pretty big brand).
Any help would really be appreciated.

if I want to copy all those song files onto my iPod, they have to be copied into itunes first, and there's not nearly enough space on my desktop for that.
No, you don't have to copy the tracks to your internal hard drive. Just turn off the "copy music to iTunes Music Folder when adding" option in the iTunes Advanced preferences. Then use the "Add To Library" menu command and select the appropriate folder(s) on your external drive. iTunes will add the tracks to the Library but not move them to the internal drive.
Once that's done, use iTunes to transfer the music to the iPod. You can then, if iTunes is set for manual synchronization, remove the tracks from the Library if you want to remove the reference to the external drive.

Restoring itunes from external hard drive

-I used WD backup program to store itunes on external hard drive
-hard drive on mac pro crashed, replaced hard drive
-trying to restore itunes songsa from external drive and when I copied songs from external hard drive to new internal hard drive which has itunes program, only song titles appear and track number for songs I ripped from CDs. All info is present for songs I purchased from itunes (why is there a difference in the way these two are restored???)
-Can I restore itunes from external drive so that artist and album are associated with each song title I ripped from CDs?
Much appreciate all assistance. Thanks.

I know MP3 and AAC save tag data, and I believe AIFF does as well (if you want to keep them in full-quality but space-greedy format). I don't think WAV supports tagging which is why they were lost. Read:
http://discussions.apple.com/thread.jspa?messageID=9558241&#9558241
This time make sure you have a complete backup of your itunes folder (which, in fact you may still have). That way you can recover your complete library and everything intact (as long as you keep your backups up to date).
Here is a related topic
http://discussions.apple.com/thread.jspa?messageID=9267109&#9267109

Please Help - Time Capsule and External hard drive Issues

Recently, I switched from Comcast to AT&T uverse as my internet provider and I started experiencing problems.
(1) I have a 4th generation Apple Time Capsule which I am using as my router.
(2) Connected to the Apple Time Capsule - USB - is an external hard drive (not for backup with Time Machine.)
(3) I have a 2011 Macbook pro which I use to access my file on my time capsule and external hard drive.
(4) I had been using my AT&T portable Hotspot from my cell phone to get internet access on my MacBook pro from remote locations to gain access to my external hard drive which is attached to the time capsule.
(5) On August 2, 2014, I switched from Comcast to AT&T and had the AT&T turn off the router function. (I have been using the router from my apple time capsule)
(6) Under Network I switched to bridge mode.
(7) And since August 2, 2014 my time capsule has not been backup.
THE PROBLEM - I need to be able to use the hotspot function from my cell phone to gain access on the external hard drive using my MacBook Pro which I was able to do before. Now it is showing time capsule under finder but unable to connect.
Do I need to reset my Time Capsule since I have a new service provider. Everything else works fine - meaning able to get internet signal but unable to access my external hard drive and backup my time capsule. Please HELP.

(5) On August 2, 2014, I switched from Comcast to AT&T and had the AT&T turn off the router function. (I have been using the router from my apple time capsule)
(6) Under Network I switched to bridge mode.
(7) And since August 2, 2014 my time capsule has not been backup.
If you got ATT to turn off router function in their modem..
Then 6. is wrong.. You cannot have the Network switched to bridge mode..
You must have it set to dhcp and nat.
That is also why you cannot backup.. the TC is off the network.
Please change back to router mode in the TC.
Ensure the internet tab shows dhcp and you create a wireless network.
Then power down the TC... power down the ATT modem.. wait about 20min (you can try 5min.. but it might not be long enough).
Power up the ATT modem.. wait 2min for things to flash lights in de right blinkin order.. then start the TC.
Open the airport utility and make sure your TC captured the public IP and is now working as the router.
That should fix that end of it.. the hotspot end??
Tell us what happens.

Problems with itunes 10 and external hard drive

Similar Messages

Maybe you are looking for