Problems with iTunes after upgrading to 4.3!

After I have upgraded to 4.3 iTunes tells me my iPhone is connected to another Medialibrary (don't know the correct english word). So now I have several Apps on my iPhone, no one in iTunes and I will loose them when I syncronize with iTunes. How can I save all Apps and settings in my iPhone?
Message was edited by: Crilodan

Solved it.

Similar Messages

  • Problem with iTunes after upgrading

    Hey guys my name is jake and my issue is so:
    i've upgraded my iTunes to the latest version 7.4.3 yesterday and on the same day i've installed quick time 6.5 codec for some work i needed.
    now i dont know if the quick time install is relate to it but since then my itunes wont open. it just errors me and ask me if i want to send or not to send eroor report
    when running quicktime( the one came with itunes) it says buffer overrun detected
    i tried reinstalling itunes few times and tried to install it on older version
    nothing has worked. also removed the ipod driver and reinstalled it
    havent worked either.
    any advices?
    thanks ahead
    Jake

    I recently upgraded to the latest that was offered and I think it was 7.4.1. Have they made a newer one since then??
    Anyways, I had a problem immediately. I have a large majority of my music on an external hard drive, and some downloaded music on my computer. After upgrading, itunes would not work, and I discovered that when I unplugged the external hard drive (which contains most of my music) itunes did work and played what was already on my laptop. Everytime I try to plug my external hard drive back in, the same problem occurs: itunes freezes and I have to shut my computer down. I also noticed that it says I have something like 6000 songs and 347 GB! I don't know how many gigs 6000 songs might be depending on length, but there is no way I have 347 gigs of music since I have nowhere near that amount of space on my hard drive and external hard drive nor do I have that much music anyways...no CLUE what is going on here.
    I'm afraid to delete itunes and reinstall it because I don't want the downloaded music on my computer to be deleted and I don't currently hve a place to back it up. Have you found any solutions/know what's going on with me??

  • Problems with ITUNES after upgrade

    I Have a G3ibook 60 gig hard drive.Finally upgraded from OS9 to OSX Tiger. Unfortunately, my ITUNES library and playlists did not come across. Tried moving library and 1300 of 1800 songs did come across. NO playlists though. Have tried trashing preferences etc. but nothing seems to work . Tired of shooting at fish in a barrel. Can anybody help?

    I can only take a guess, as Colin said, but my guess is as follows:
    Take a look at this:
    What are the iTunes library files?
    When you moved your songs did you leave those 2 files in the original ~/Music?iTunes folder? If you didn't, that will make iTunes lose your playlists, etc.
    Tunes Library(iTunes Library.itl in Windows)
    This file is a database of the songs in your library and the playlists you've created. Some song-specific data is saved in this file. If you delete the file, iTunes creates a new, empty copy when you open the application, but any playlists, song ratings, comments, or other information you created is lost. The iTunes Library file is only used by iTunes.
    This file must be in the correct folder. iTunes creates an iTunes Library file even if it is not deleted, only misplaced.

  • I am having problems with mail after upgrading to mountain lion. Is there a way to go back to lion?

    I am having problems with mail after upgrading to mountain lion. Is there a way to go back to lion?

    It would always be easier to fix the Mail problems.

  • HT1589 problems with itunes after updating..can't locate some of my songs..some have an exclamation point beside them how do i get these songs back in my itunes

    I'm having problems with itunes after updating. I've lost all my playlists,,finally played around with it and got the songs back but some have an exclamation point beside them and can't be located. they are songs i've purchased. I'm not very computer literate so this is a major problem. I have spent hours with this. I just want all my songs to play even though I'm not happy that I have to recreate my playlists. It would be so much easier if I knew and understood how to correct this. Has anyone else had this problem and if so..is there an easy way to correct it?

    Not sure how this is an ipod touch question.
    Perhaps you should post in the itunes forum.

  • Problems with Mail after upgrading to 10.9.1

    I am running into problems with Mail after installing 10.9.1. I had NO problems with Mail prior to this update.
    Problems I have encountered so far are:
    - I don't receive some e-mails on my Gmail account.
    - I have sent e-mails that supposedly got "sent" but do not show up in my Sent box both on mail and on web Gmail. My Outbox is empty also.
    Has anyone encountered the same problems and found a solution?
    Thanks in advance!

    Yes Paul I have, but no solution. I cannot send email. My ISP uses a smtp mail server for sending and It will not log in. Have had ISP on phone and checked all settings. Can only put it down to Mavericks.
    It worked OK for a week after upgrading then stopped. So now having to use web mail to send email.
    Strange thing is I receive mail OK, just cant send.

  • Problems syncing with iTunes after upgrading to OS5

    Hello,
    After upgrading my iPod 3G software to OS5, when I plug my iPod into my Mac (OS10.6.8), iTunes (v10.5) will freeze for several minutes before it can be used again. When I sync my iPod, iTunes will sync all my video podcasts to the iPod, even the ones that were already there, each and every time. I've tried resetting my iPod, but that hasn't worked. Wondering if other people have experienced the same problems and if anything has worked?
    Thanks,
    Clare

    Solved it.

  • Problem with contacts after upgrading to iOS 7 (iphone 5)

    After upgrading to iOS 7 (iphone 5), the contacts (loaded from icloud) in greek language aren't sorted!!! They are under the # symbol!! Anyone has a solution. I didnt have this problem with previous iOS versions!!!!

    My phone was fine after I connected to iTunes. It appeared in recovery mode and then it downloaded the update, installed and all was fine.
    Regards,
    Jeevan.

  • Problem with ID after upgraded of Iphone 4

    I had some issued with all the pics on my Iphone, and decided to updrage to the last version.
    After the upgrade, the IPhone with Itunes asked me for the ID. But I gave the wrong ID and now the Iphone is bloked.
    Even my ID is blocked and going to be deleted.
    How could I created a new one or updated the last one to activate again the Iphone.
    6 days without Iphone ....

    Most changes between Java versions have been backward compatible. There are a few that aren't, and they are documented in the release information for each version. The impact on applets is minimal, if any.
    Check out these applets and see how they run:
    http://developer.java.sun.com/developer/codesamples/applets.html
    Old 1.1 applets can run on all virtual machines, anything later needs the Sun Plug-in (ver 1.3.1_02 or later), or needs to be converted to run using Sun's vm.
    One problem is with XP not including a Java vm, that will stop you cold until a Sun Plug-in is installed and enabled.
    Need more detail for anything more...

  • [SOLVED] Problem with murmur after upgrading to 1.2.3-4

    I've been running Murmur on my server for a long time without problems. The last version I had running was 1.2.3-3. After upgrading to 1.2.3-4, the already-running murmurd process crashed after a while (some hours after the upgrade, after constant use) and I'm unable to restart it. The message I get is:
    :: Starting murmur [BUSY]
    <W>2012-01-07 22:06:11.133 Initializing settings from /etc/murmur.ini (basepath /etc)
    <W>2012-01-07 22:06:11.134 OpenSSL: OpenSSL 1.0.0f 4 Jan 2012
    <W>2012-01-07 22:06:11.134 SSL: Adding recommended CA StartCom Certification Authority
    <W>2012-01-07 22:06:11.134 SSL: Adding recommended CA AAA Certificate Services
    <W>2012-01-07 22:06:11.135 SSL: Adding recommended CA UTN-USERFirst-Client Authentication and Email
    <C>2012-01-07 22:06:11.135 Successfully switched to uid 1007
    <F>2012-01-07 22:06:11.230 ServerDB: Failed initialization: unable to open database file Error opening database
    [DONE]
    and in murmur.log nothing gets written. Downgrading to 1.2.3-3 works, but I thought I'd look for the cause of the problem.
    After poking around a bit, I noticed that my murmur database (/var/lib/murmur/murmur.sqlite) belongs to a nonexistent user with a UID of 86 and a GID of 86, as well as the whole /var/log/murmur/ directory. I also noticed that a new murmur user and group with UID and GID of 1007 and 1000 exists on the system now. It seems that running:
    sudo chown -R murmur:murmur /var/lib/murmur/ /var/log/murmur/
    fixes the problem. Perhaps the update deleted my pre-existing murmur user and group and recreated them?
    Edit: Guess I should mark this as [SOLVED].
    Edit edit:
    Also turns out the whole /var/lib/murmur/ directory has to belong to murmur, not just the sqlite file.
    Last edited by n17ikh (2012-01-08 03:22:39)

    I had the same problem and fixed it like you.

  • Wifi problem with Mac after upgrade to Mavericks

    I just upgraded to Mavericks but something wrong with my wifi.
    i can get internet through LAN link from Airport but not through wifi even i can receive an IP address
    i tried connect to hotspot with my iphone5s and it works.
    Other devices can use wifi just fine through Airport, just not my Mac using Mavericks
    In conclusion,
    Airport should be fine because my other devices works.
    Mac wifi should be fine too because i can connect using hotspot.
    so why it's not working when i connect Mac to Airport?

    I was having problems connecting to Wifi with my Macbook Pro (!2010), after upgrading to Mavericks. I was on the phone repeateadly with AT&T because I have Uverse. Testing everything (channels, signal strength) and had techs come out to check the line, ports, switches, etc. When I hardwired the Mac into the Uverse router, it worked fine. This rulled out any problems with the line in.
    I considered getting a repeater but then I read that repeaters are not really good and it is better to reconfigure a router to act as an access point on the network. Plunked down about $80 for a Belkin AC750 router at Best Buy. In the setup it has an option to set it up as an access point only. Clicked that, connected it to my Motorola NVG510 Uverse modem and then connected to the Belkin router from my Mac. Voila!  It's been a solid 11+ Mbs ever since (my plan maxes at 12Mbs). Connection is still solid and life if good even though it ***** to plunk down another $80 for a second router. But it was worth it just to get rid of the headaches.
    I think the wifi capabilities of the Motorola NVG510 modem are the cause of a lot of problems with AT&T Uverse issues, particularly for Mac owners. I think it was also causing my Airport Expresses to drop occasionally.... Few minutes of music then drop... music drop.... All gone now.
    I don't know if you are on Uverse but if so, I highly recommend configuring a second router as an acces point (it can be any old router you still might have - the setup is just a bit trickier because you have to do it manually).
    Good luck.

  • Iphone 3gs problem with network after upgrading to 5.1.1

    Hi...
    I have Iphone 3gs and requested official unlock from my provider. They said they did it and all I have to do is connect it with iTunes.
    I had ios 3.x and upgraded to 5.1.1 through iTunes.
    But now after upgrade, my phone is not unlocked and niether works with original card.
    3G network is one second ok, after one second drops to 1 line, and after that I got No network.
    I managed to make call, but that call only last for 1 second.

    I wouldn't assume that.  Don't know anyone who changed carriers without canceling the original.  The intermittent connections he describes are typical of SIM card issues.
    The point is that your statement that "updating is not enough" is incorrect.  When he "updated" to iOS 5, a full restore was already done. If there were errors during that process, restoring again might help, but its not necessary to restore.

  • Problem with colors after upgrading to Lion

    After upgrading to Lion, I could no longer distinguish between very light greys (e.g., #f8f8f8) and white (#ffffff) on my laptop monitor. The difference is readily apparent on many websites.
    If I plug my laptop into an external monitor, the problem goes away, and stays away even AFTER unplugging it.
    Neither recalibrating the color profile nor rebooting have any effect.
    Any ideas?

    iPhoto is not part of Lion. It comes with a Mac. So, the version you own is the one that came with your Mac. If you want the newest version, you'll have to purchase it from the App Store.

  • Is anyone having problems with keynote after upgrading to Lion?

    After upgrading my system to Lion, my keynote presentations are becoming a nightmare. They crash all the time, and are becoming significantly slower, not just due to the autosave but after making just a few movements the beach ball appears and takes forever for me to be able to edit the document again. When I try to put into presentation mode the computer stops, sometimes I even lost the images inside the saved prasentation, and when I tried to recover from the auto saved versions, they were corrupted also. I talked to the apple support here in Brazil and after running all kinds procedures to check and fix the disk and hardware even in the safe mode, it still remained with the same problem. Another suggestion was to reinstall the keynote, and I even bought a new version from the app store even though the old one was updated. Again, nothing changed. Does anyone have the same problem or knows what to do?

    Hi Thomas - listen, I want to tell you that we aren't necessarily all in the same boat...what I mean is that this problem almost ruined my business and I spent a long time reading the dozen or so threads in this board, and tried solutions people suggested in each one. I had two separate problems...the first was like yours, and it was indeed solved by the time machine save setting mentioned above. The other was that I couldn't get an object selected with a click of the mouse every tenth time or so...I had to click onto a different slide and then come back to mine. I started turning off every single piece of hardware and software one by one, in search of a conflict. It turns out that my Apple Magic Mouse was the problem. I switched it to a plain MS wireless mouse and problem solved. *****, but it let's me continue. My point is that too many people are using Keynote just fine for any of us to throw in the towel and say it's universally and irreversibly broken. There are different bugs in play, but you have to go on the assumption that there's a way out if you can spot what's not quite right. Sorry I don't have your specific solution, but this mindset is what saved me from jumping ship to PPT.

  • Problems with plugins after upgrading to win8

    Hi
    I made the upgrade to Windows 8 and now several PS plugins causes Photoshop CS6 to "Stop Working And need to close". I have uninstalled
    and reinstalled plugins and still the same problem. As this happens with different plugins from different vendors I am led to believe this is
    not a 3rd party problem, but rather a problem with PS in win8. Happens with plugins from Niksoft and RedGiant. Needless to say I have
    all the latest software and updates - legally purchased.
    I haven't done much research into this, posting here is my first step after googeling didn't help. Is this a common problem? Does anyone
    know a fix to this? It's of such importance that I am already considering reinstalling win7.

    As an update on this,
    After I installed the latest Windows Update system fix packages that were released today most of the plugins now work. I am not 100% sure I can credit MS with fixing this, as I fiddled with alot with my graphics card trying to make this work at the same time as I updated. I will have to do some more testing on this to able to say exactly what was the problem.
    I'm installing win7+ps on a virtual machine so I can use that when absolutely needed for the plugins still not working - guess I can live with that until certain 3rd party vendors sort things out.
    Allright Noel, I get your point  - but you have to be downright difficult to be reading my initial question as if I was seeking support on 3rd party software as such.

Maybe you are looking for

  • Is there a way to get several serial data lines to poll and respond quickly?

    I have a PCI-485/8 card where I need to use all 8 ports. Attached is the vi that I�ve developed so far. It works well when there are only 1 or 2 ports. But it really slows down the calling vi when I get up to 8 ports. The Read Delay is intended to se

  • Arch PPC - Display not outputting anything

    I've been working with an Apple G4, 1.4(?)Ghz PPC with one of the Apple Display Port monitors, and I've been trying to get arch on it using the install image from the Arch PPC site. So I finally got it to boot correctly, dear god that was more work t

  • Preview blurry images?

    I have a few photos open in Preview, and they have a slight blur to them. Then I open the same files in photoshop, and they are crisp. Anyone else notice this? And I am a professional photographer, so no, the images are not out of focus

  • ICal Email Invitations

    I have setup my office calendar using CalDev to my office computer and almost everything works as expected. I have "On My Mac" calendars and "CalDev" calendars on both my workstations (OSX 10.6.8) and on my server (OSX 10.8.2) user accounts.  When I

  • Developing a java applet questions?

    I am new to java, I want to write a java applet to do the printing for word document and pdf, is it possible, I hope that one expert can share me a good sample code . By the way, for developing a java applet , what development environment should I in