Problems with iTunes installation

Hello,
I am having problems with installing iTunes 10.4. I am running an Acer Aspire M1640 running Windows Vista (32) v 6.0.6002 SP2 and updated.
When trying to update my old version of iTunes I got the following error
"Bonjour: The feature that you are trying to use is on a network resource that is unavailable. Click OK or enter an alternate pathway to a folder containing the installation package 'Bonjour msi' in the box below."
When I tried OK I got a repeat of the error and when I tried "Browse" this produced an unintelligble list of files.
I then went to the Apple iTunes installation problems and followed the instructions there.
Firstly I managed to delete the majority of the files in the Tenp folder and then uninstalled the old iTunes and made sure that Windows was updated.
I tried downloading a new version of iTunes from the Apple download site but on attempting to install it I ended up with the same error.
Can anybody out there offer any help with this as I am currently without my iTunes

Hi again,
I have just posted an answer to my problem on a "more like this" discussion that I found on Apple Support Communities. So far I have managed to install iTunes and QuickTime in the way b noir suggests on this post.
It is early days but so far so good.
Uninstalling iTunes/Quicktime "The feature you are trying to use is on..."

Similar Messages

Problems with iTunes installer

I downloaded iTunes and the iTunes installer gives me this message after the installation:
"iTunes installer completed
Errors occurred during installation before iTunes could be configured.
Your system has not been modified. To complete the installation, run the installer again."
So I ran the installer several more times but got the same message each time.
Note: I never downloaded iTunes before. Also the computer shut down a minute after the installer completed with a message that said I should uninstall any new software or programs. I'm not sure if there is any connection but just to be on the safe side...
Thanks!
I'm using a Windows 7 Home Premium.

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
tt2

Problem with iTunes installation - Error Message when trying to use

I intalled iTunes on my Dell Laptop. The icon is on my Desktop, but when I try to start it, I get the following error message;
"iTunes has encountered a problem and needs to close. We are sorry for the inconvenience."
Then the error message wants me to send some message to microsoft?

You can't do that. Instead, just remove "aaa new-model" from the config then try to deploy it. Alternatively, you can try "merge mode," but that will send the whole config back to the device.

Has anybody had the following error while trying to download iTunes 10.5? There is a problem with Windows Installer package. A program required for this install to complete could not be run.

Has anybody had the following error while trying to download iTunes 10.5? There is a problem with Windows Installer package. A program required for this install to complete could not be run.

Go to "control panel" then "add or remove programs". Highlight "Apple software update" Choose "change" click "Repair" This should do the trick. Then download and install iTunes 10.5 again.

Tried to install iTunes 10.5 this morning but an error appeared saying "problem with windows installer package. A program required for this install to complete could not be run." Can someone please help

I tried to install iTunes 10.5 this morning but an error appeared saying "problem with windows installer package. A program required for this install to complete could not be run." Can someone please help

Firstly, are you installing iTunes for the first time or are you updating your current version of iTunes?
If you're installing iTunes for the first time have you tried redownloading the installer package? Perhaps the file you downloaded originally is corrupted...
http://www.apple.com/itunes/
If you've tried that, then try installing iTunes as your computer's administrator. To do this right-click the install package and choose "Run as administrator".
If you're updating iTunes to the most recent version try repairing the Apple Software Update program on your computer. It's under the add/remove programs.
1. Open the control panel
2. Open Add/Remove programs (called "Programs and Features" in Windows 7)
3. Navigate to "Apple Software Update" in the list and click on it
4. Click on "Change" then select "Repair" (or just select the repair option in Windows 7)
Once you repair this, try running iTunes and the update again.
Fingers crossed!

When i try to update my itunes on my pc i keep getting the messaage that there was a problem with the installer and it could not finish. how do i fix this? i`ve tried to download 3 times already.

when i try to update my itunes on my pc i keep getting the messaage that there was a problem with the installer and it could not finish. how do i fix this? i`ve tried to download 3 times already.

Hi
I've got a similar problem. iTunes v10.2 worked fine, but when I tried to update it to 10.5 I got a 'Bonjour' error. I eventually solved that but I still couldn't upgrade to 10.5, so I deleted every single Apple, Quicktime, iTunes, etc file on my PC using Revo Unistaller (because the normal Windows Add/Delete programs wouldn't work) but now, when I install the latest iTunes version from scratch (on XP SP3), it says: "the installer encountered errors before it could be configured.... your system has not been modified"
Any ideas?
Rick

HT1349 Hi all,I have just purchased new iphone but have difficulty in completing the itunes download with message : problem with Windows installer package. A program run as part of the setup did not finish as expected.

Hi all,I have just purchased new iphone but have difficulty in completing the itunes download with message : problem with Windows installer package. A program run as part of the setup did not finish as expected.
Would appreciate help...its driving me up the wall!!

Perhaps let's first try updating your Apple Software Update.
Launch Apple Software Update ("Start > All Programs > Apple Software Update"). Does it launch and offer you a newer version of Apple Software Update? If so, choose to install just that update to Apple Software Update. (Deselect any other software offered at the same time.)
If the ASU update goes through okay, try another iTunes install. Does it go through without the errors this time?

Having trouble trying to install itunes 10.5. Receive message saying 'There is a problem with this installer package. A program required for this install to complete could not be found. Please contact product vendor'

Having trouble trying to install itunes 10.5. Receive message saying 'There is a problem with this installer package. A program required for this install to complete could not be found. Please contact product vendor'

Managed to get the installation sorted. Go to Control Panel, and where you have a list of all installed programs, repair all the Apple/Itunes related programs. Installation worked fine after that. Hopefully it helps you out too!

HT1926 (iTunes) Problem with Windows installer package?

(iTunes) Problem with Windows installer package? I try to install the new version of iTunes but get an error "Problem with Windows installer package. A Program required for this install could not be run." Can anyone help shed some light for me as to how to correct this? I have tried to install the program through Chrome, Explorer and FireFox but have had no success. I have included a screenshot of the error. Hopefully it's visable. Thank you for any help.

Found answer for anyone else curious. I love the apple community. Thanks guys for help!
https://discussions.apple.com/docs/DOC-3551

Trouble with itunes upgrade I receive an error message problem with windows installer package

I am trying to upgrade itunes. I am running windows vista 64. Everytime I try to upgrade I get an error that says Problem with windows installer package. Anyone know how to fix this?

No drivers in LowerFilters.
No drivers in UpperFilters.
Failed loading CD / DVD drives, error -43. Try doing a repair install on iTunes from the “Add or Remove Programs” control panel.
I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes

Why is itunes saying "there is a problem with this installer package. a program required for this install to complete could not be run. contact your support personnel or package vendor."

why is itunes saying "there is a problem with this installer package. a program required for this install to complete could not be run. contact your support personnel or package vendor."

Go to START > ALL PROGRAMS > Apple Software Update. If it offers you a newer version of Apple Software Update, do it but Deselect any other software offered at the same time. Once done, try another iTunes install
If you can't find ASU, go to Control Panel:
XP - Add n Remove Programs
Win7/Vista - Programs n Features
Highlight ASU, click change then Repair.

More problems with iTunes 9.1.0.79

Hi,
since I have had my iPhone I have upgraded itunes a couple of times and never had any problems until now.
I upgraded to 9.1.0.79 two days ago and am having all sorts of issues.
Now when itunes starts it takes ages.
When my iphone is connected I get a message saying:-
+itunes cannot sync information with the iphone 'iphone' because syncing has been disabled on this computer+
I click the yes button to enable syncing and then receive an error message:-
+itunes was unable to load provider data from sync services reconnect or try again later+
I then click OK and my phone appears in the devices list.
These error messages happen every time I start itunes, so by me clicking the yes button to enable syncing does absolutely nothing.
My iphone will sync fine just that itunes tends to freeze up and is very slow.
I run a diagnostic from the help menu and without my iphone connected it shows a red dot next to 'No iPhone or iPod found', which is correct but when I have my iphone connected this red dot is now orange, what is the difference in colour?
I have turned of all anti-virus and firewall software but itunes is still the same, very unresponsive, so anti-virus/firewall is not the problem.
I followed to the letter:-
http://support.apple.com/kb/HT1925 and totally uninstalled everything and then reinstalled itunes only to find the same problem persisting.
This is definitely a problem with itune 9.1.0.79 and apple should be addressing it pronto.
Here is the data from the diagnostic run and it shows my iphone as not found even though it is connected, showing in devices and I can sync to it, wierd!!
Microsoft Windows XP Professional Service Pack 3 (Build 2600)
To Be Filled By O.E.M. To Be Filled By O.E.M.
iTunes 9.1.0.79
QuickTime 7.6.6
FairPlay 1.7.16
Apple Application Support 1.2.1
iPod Updater Library 9.0d11
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 3.0.0.102
Apple Mobile Device Driver 1.46.0.0
Bonjour 2.0.0.34 (214.3)
iTunes Serial Number **************
Current user is an administrator.
The current local date and time is 2010-04-12 20:39:07.
iTunes is not running in safe mode.
Video Display Information
ATI Radeon HD 2600 XT AGP
** External Plug-ins Information **
No external plug-ins installed.
** iPod/iPhone Connectivity Tests **
iPodService 9.1.0.79 is currently running.
iTunesHelper 9.1.0.79 is currently running.
Apple Mobile Device service 3.0.0.0 is currently running.
Universal Serial Bus Controllers:
VIA Rev 5 or later USB Universal Host Controller. Device is working properly.
VIA USB Enhanced Host Controller. Device is working properly.
FireWire (IEEE 1394) Host Controllers:
VIA OHCI Compliant IEEE 1394 Host Controller. Device is working properly.
Most Recent Device Not Currently Connected:
iPhone 3GS running firmware version 3.1.3
Serial Number: *********
** iPhone/iPod touch Sync Tests **
Sync tests completed successfully.
I have blanked out serial numbers etc..
Regards..,
K :0(

notice how under diagnostics readout it shows "most recent device not currently connected"
mine does same thing and i have iphone connected when i do it.
my problems also started with this update and i show 4 errors in event viewer which is under adminastrative tools in control panel.
MY problem is super slow backups for a 16gb 3Gs with 12gbs free. a backup used to be done in like 30-45 seconds now takes about 5 minutes and looks as if it stals at a few points when looking at bar at top of itunes.
my iphone shows up in itunes and shows all pages etc. i do everything manually although i do sync apps.
everytime i connect iphone and open itunes i get 4 errors thats show up only in event viewer (but anyone who maintains computers should be aware of all tools available to them to see whats going on in the background) that show up for "BONJOUR" i have posted this here and under bonjour forum. i turned off bonjour services the proper way again thrru adminastrative tools>services double click bonjour and change for "automatic to "disabled". don't do it through msconfig as some would tell you to do if it's a bonjour issue.
but checking out event viewer can give you valuable info so you don't do the apple nonsense wasting hours to clean up their messy installation only to have it do exact same thing again. it's obvoius they have a conflict.... now we can only hope for a resolution ie UPDATE if enough complain by sending them all this.
i don't have a jailbreak phone nor am i rebuilding anything i'll live with it till they fix it as my event viewer log isn't getting filled up with bonjour errors anymore nor do i need all this bloated crap apple sends our way... i do have quicktime pro.

Seemingly Impossible Problems with iTunes

I've never had any problems with iTunes until a few months ago, and I've been unable to use the program since. It all started when I upgraded to iTunes 10, and my computer randomly started to freeze every time I tried to open the program. I thought that I would try to uninstall and reinstall iTunes, but it definitely hasn't worked out the way I'd planned.
The iTunes 10 installations would cause my computer to freeze, so I thought I would try to go back to iTunes 9, which I had no problems with previously. I followed the uninstall instructions on the Apple Support website, started to install iTunes 9, and my computer freezes every time when "registering iTunes automation server". I can't even get the Task Manager to come up when this happens, so I'm forced to turn my computer off and start over. I tried this again, still no luck. I uninstalled everything, turned off my spyware programs, deleted my temp files... everything. I even deleted the program files today, and I still haven't had any luck.
I have a small fortune invested in iTunes, and I'd really like to get it back up and running before Christmas. I have some new CDs I'd love to put on my iPod, and one of my favorite bands is releasing a limited edition digital box set that you can only get on iTunes that I'd really like to have. I've read that Apple doesn't even know how to fix this problem, and I don't really want to spend $29 for a pointless phone call.
Any help would be highly appreciated, thank you in advance!

No such luck
I've tried uninstalling all of the Apple programs on my computer, but the installation still freezes at the same spot.
Thank you for the suggestion though.

Problems with iTunes 7.1.2 : Missing Contacts Info

Problems with iTunes 7.1.2 : Missing Contacts Info !
I synced my iPhone 5s (running v 7.1.1) to my late 2010 MacBook Pro 13" (OSX 10.9.4) using iTunes (can't remember exactly which version of iTunes, but whatever was the latest around the end of May 2014).
Subsequently, I upgraded my iPhone 5s to v 7.1.2 and also upgraded iTunes to 11.3.1 (2), then synced my 5s to my MacBook Pro.
Following this, on both my iPhone and on my Mac (I don't use iCloud), many of my Contact details had reverted to a much older version, and most of the information under the "notes" field in each contact was missing.
Is there a way to revert to the prior version of iTunes (7.1.1) or otherwise restore this missing information? There is critical information in my Contacts that has now ceased to exist!

Often in upgrading the OS, QT or FCP for some odd reason QT will get knocked slightly off kilter. Before doing the step back to 6.5.2, try a complete QT reinstall.
This is how:
Go to /library/receipts and delete any files that say Quicktime followed by a number e.g. Quicktime703.pkg
Go to the Apple quicktime site and download the appropriate version of Quicktime to your hard drive.
Run the Quicktime installer.
Repair Disk Permissions for your System Disk (Disk Utility > Select the system disk > Repair Disk Permissions)
Reboot
FWIW, FCP4.5 can run without issue under 10.4.x and QT7, but it is VERY stable under 10.3.9 and QT6.5.2.
Good luck.
x

Unable to download apple updates due to problem with windows installer

I 'm unable to download updates on itunes, icloud on my computer because of problem with windows installer. How do I fix the problem?

because of problem with windows installer.
What's the precise text of the message, please? (There's a few different ones I can think of that you might be getting.)

Problems with iTunes installation

Similar Messages

Maybe you are looking for