Problems with itunes sound via bluetooth in windows 8

itunes installed in computer windows 8.1 stopped working the audio via bluetooth, only itunes, the Bluetooth speakers work in the other programs and applications, music, movies, internet, even the regular windows sounds, it works, with itunes no sound, only sometimes, strange noise when you change tracks

I had that problem too. Maybe it works when you change your Bitrate in Itunes. My Bluetooth speakers run at 48 Khz and after the Itunes update, Itunes changed his settings to 44.1 kHz (before the update it was also 48kHz). I hope i could help you. Sorry for bad english i'm from Germany

Similar Messages

I have a problem with itunes' sound

i have a problem with the i tunes' sound. It's so noisy.
How can i find itunes customer service email address if there is any

hi bolt!
let's first try working through the suggestions on this document. if you've got an itunes version 5.0.x or 6.0.x, you'll need to try the QT 7 version of the waveout fix.
iTunes and QuickTime for Windows: Songs and other audio don't play correctly
love, b

IPhone 5 audio issues when paired with surround sound via Bluetooth.

iPhone 5 has developed audio issues since ios7 updates when its connected to surround sound system via Bluetooth. Audio jumps and skips in erratic and unpredictable manner on music app and worse on third party apps such as YouTube . Have restored phone from factory settings etc. Have also checked surround sound for fault with Bluetooth; iPhone 4 ios7 works fine, android works fine but newest iPod touch with ios7 appears to have developed same issue as iPhone 5 since ios7 updates. Advise people to check for this issue on their Bluetooth devices and any advice would be appreciated on this issue :)

Hey there Vxas,
It sounds like you are gettings some very unexpected behaviour from the iPhone to your bluetooth surround sound system. I would try the troubleshooting recommended in this article:
iOS: How to troubleshoot Bluetooth connections
http://support.apple.com/kb/TS4562
Check that you are in range of the Bluetooth device with which you are trying to pair your iPhone, iPad, or iPod touch. Most Bluetooth devices have a range of approximately 30 feet.
On your iOS device, tap Settings > Bluetooth and find your device in the list. If your device says Not Connected, tap the name of your device to attempt to connect it.
Tap Settings > Bluetooth and turn Bluetooth off and then on again.
Make sure that your Bluetooth accessory is turned on and fully charged or connected to power.
Restart your iOS device.
Tap Settings > Bluetooth and locate the Bluetooth accessory you are currently connected to or attempting to connect to. Then tap and Forget this Device. Try to pair your Bluetooth accessory again.
Note: You may need to re-enter your Bluetooth accessory PIN if your accessory requires one. Some common PINs are 0000, 1111, and 1234.
Restart your Bluetooth accessory by turning it off and then on again1.
Update your device to the latest version of software. See how to update your iPhone, iPad, or iPod touch.
If your Bluetooth accessory has upgradeable firmware, check to see that you have the latest version1, 2.
Thank you for using Apple Support Communities.
Take care,
Sterling

TS1717 are there problems with iTunes upgrading from Vista to Windows 7?

are ther problems upgrading iTunes from Vista to Windows 7?

The best method is to use Windows Easy Transfer first to backup all your data, and do custom clean install. And install all your apps and drivers afterwards.
Yes it should work. Make sure you are ready, and have all the latest drivers and applications ahead of time.
There are some "gottchas" with the upgrade from Vista.

Problem with file transfer via Bluetooth

I have been trying to receive some large files (43Mb) via bluetooth from another device but always get transfer fail message. But i could receive smaller flies...
-Does this have anything to do with the device memory limit of 15MB?
-How can i receive larger video files from other devices using bluetooth?
-Does the BOLD have the same problem?
Please help.
Thanks

What type of errors is being generated? Are you trying to save that file on device memory or media card? try moving that file on media card.
tanzim
If your query is resolved then please click on “Accept as Solution”
Click on the LIKE on the bottom right if the post deserves credit

Problems with Itunes 10.5.1 and Windows 7

Sirs,
yesterday my old pc with Windows XP SP3 was replaced by a new laptop with Windows 7 32 bits.
When I tried to install the new version 10.5.1 of itunes show several errors and don't work.
I install then the version 10.1.4 and was installed without problems but don't accept my Ipod touch because requires the new version of software.
Then, I tried to download the new version using the Itunes update manager and failed to install the version again.
Attach is a part of application event log.
Best regards,
Carlos G

I forgot, the operating System is Windows 7 Profesional 32 bits.
Error    12/10/2011 8:24:17 AM    SideBySide    33    None
Log Name:      Application
Source:        SideBySide
Date:          12/10/2011 8:24:22 AM
Event ID:      33
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:
Description:
Activation context generation failed for "C:\Program Files\Common Files\Apple\Mobile Device Support\AppleMobileDeviceService.exe". Dependent Assembly Microsoft.VC80.CRT,processorArchitecture="x86",publicKeyToken="1fc8b3b9a1e18e3b ",type="win32",version="8.0.50727.6195" could not be found. Please use sxstrace.exe for detailed diagnosis.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="SideBySide" />
    <EventID Qualifiers="49409">33</EventID>
    <Level>2</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2011-12-10T13:24:22.000000000Z" />
    <EventRecordID>5171</EventRecordID>
    <Channel>Application</Channel>
    <Security />
</System>
<EventData>
    <Data>Microsoft.VC80.CRT,processorArchitecture="x86",publicKeyToken="1fc8b3b9a1 e18e3b",type="win32",version="8.0.50727.6195"</Data>
Error    12/10/2011 8:29:12 AM    MsiInstaller    11935    None
Product: Apple Application Support -- Error 1935. An error occurred during the installation of assembly 'policy.8.0.Microsoft.VC80.CRT,type="win32-policy",version="8.0.50727.6195",pub licKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="x86"'. Please refer to Help and Support for more information. HRESULT: 0x800736B3. assembly interface: IAssemblyCacheItem, function: Commit, component: {63E949F6-03BC-5C40-A01F-C8B3B9A1E18E}
Error    12/10/2011 8:24:22 AM    MsiInstaller    11920    None
Product: Apple Mobile Device Support -- Error 1920. Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services
Error    12/10/2011 8:24:22 AM    SideBySide    33    None
Activation context generation failed for "C:\Program Files\Common Files\Apple\Mobile Device Support\AppleMobileDeviceService.exe". Dependent Assembly Microsoft.VC80.CRT,processorArchitecture="x86",publicKeyToken="1fc8b3b9a1e18e3b ",type="win32",version="8.0.50727.6195" could not be found. Please use sxstrace.exe for detailed diagnosis.
carlosfromcucuta wrote:
Sirs,
yesterday my old pc with Windows XP SP3 was replaced by a new laptop with Windows 7 32 bits Profesional.
When I tried to install the new version 10.5.1 of itunes show several errors and don't work.
I install then the version 10.1.4 and was installed without problems but don't accept my Ipod touch because requires the new version of software.
Then, I tried to download the new version using the Itunes update manager and failed to install the version again.
Attach is a part of application event log.
Best regards,
Carlos G

Problems with iTunes and iPod running under Windows Vista

I recently changed my computer. I now have an HP Pavilion running windows Vista (use to have XP). I have a video iPod -30GB. I downloaded iTunes onto the new equipment without incident, but that is the last thing that went smoothly.
I can no longer watch TV shows or movies from iTunes. The video plays like a slide show of stills (the audio is real-time however). Eventually I will get an error message from Windows and it closes the application.
I am also having issues with syncing my iPod and computer. I get a message requiring me to delete all of the content of the iPod and replace it with the contents of iTunes. I haven't done this -no trust and no backup
The delete message is from iTunes. I suspect it is a security feature to prevent downloading to more than one iPod, as iTunes doesn't seem to 'know' my iPod anymore. Syncing has also caused iTunes to close and my computer to reboot. Has anyone else had these problems?
HP Pavilion Windows Vista

you may want to take a look at the iPod 101 tutorials. Those might help.
Regards.
< Edited by Host >

ForA1354477: problem with realtek sound driver download for windows 7

I recently did a clean install of windows 7 enterprise and I lost the option on the sound recording page for stereo mix. I found a driver update on the toshiba website for my machines realtek sound driver for windows 7 so I tried it and it worked (sort of). Now I have the stereo mix option set as default but I also cannot make any changes in the sound recording page (the tabs are nor functioning and my cursor spins it's little processing circle when it is over the page). I can't even close the page without using the option from the task bar and sometimes that fails so I have to use the task manager to close the page. Anyone else have this problem?

Satellite A135-S4477
These two drivers should work for your Windows 7. Although they carry the same version and date, they are different files with different sizes. Try them both.
Realtek Audio Driver for Windows 7 (32/64) (Version 6.0.1.5904 - Released 09/04/09)
Realtek Audio Driver for Windows 7 (32/64) (Version 6.0.1.5904 - Released 09/04/09)
-Jerry

TS3694 Hey Guys, having ongoing problems with iTunes Update/re-install on Windows 7 PC. Errors to follow....

Errors:-
1. This file does not have a program associated wthit for performing this action. Please install a program,or if one is already installed, create an association in the Default Programs Control Panel.
2. A required iTunes component is not installed. Pls repair or reinstall iTunes (-45075).
I've followed the iTunes suggested fixes but no joy appreciate any other thoughts/suggestions/help. Cheers

2. A required iTunes component is not installed. Pls repair or reinstall iTunes (-45075).
Just in case the component being referenced is not part of iTunes but is rather part of one of the other related programs, it might be worth trying a complete uninstall/reinstall of iTunes and related componentry, as per the following troubleshooting document:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

Problem with itunes 11.1.0.126, windows 7, 32-bit version, not recognizing iphone 3gs

Anyone having an issue like this? I just updated to the latest version of itunes, 11.1.0.126.

Anyone having an issue like this? I just updated to the latest version of itunes, 11.1.0.126.

Problems with itunes 10.5.2 for windows 7, download of itunes 32 bits won´t work

I installed it but it goes until the contract part, after i agree to the terms it shuts down.

This symptom could be caused by an unusable iTunes configuration file. Follow the steps below to troubleshoot this issue.
Remove SC Info.sidb file
(This applies to Win7 or Vista)
From the Start menu, click Computer.
In the Organize menu, click Folder and Search Options.
Click the View tab.
In the "Advanced settings" pane under "Hidden files and folders" make sure that the "Show hidden files and folders" option is selected.
Click OK.
Navigate to the following location by either typing it into the address bar, copying and pasting it into the address bar, or clicking through the folder hierarchy listed: C:\Program Data\Apple Computer\iTunes\SC Info
Right-click the SC Info.sidb file shown and on the shortcut menu, click Delete.
Right-click the SC Info.sidd file shown and on the shortcut menu, click Delete.
Restart the computer and open iTunes.
If this does not work, repair your Quicktime - START / CONTROL PANEL / PROGRAM and FRAETURES / highlight QUICKTIME and click REPAIR

6300's problem of transfer file via bluetooth

Hi..i just got a brand new 6300
but i've got a problem with transfering file via bluetooth from my laptop to my phone
sumhow i can transfer file from my phone to my laptop, and i also can transfer image file from my laptop to my phone...
but a problem occured when i try to send MP3s file from my laptop to my phone...
i've already succeed to pair my laptop and my phone...but still i can't transfer thoose files...
can anyone help me??
please...
thx a bunch

Make sure that you have enough phone memory available, even if you are transferring to the memory card.
When sending files by bluetooth they are transfered (cached) to the phone then the phone transfers them to the memory card.
Also you should transfer files one at a time.
If you are transfering lots of MP3's you would be better off using a data cable as it will be a lot quicker.

HT1657 Hi, I rented a movie off iTunes but the there is no sound. I've bought and rented previous movies and I've never had any problems with the sound before. Is this some kind of glitch? How can I get my money back?

Hi, I rented a movie off iTunes but the there is no sound. I've bought and rented previous movies and I've never had any problems with the sound before. Is this some kind of glitch? How can I get my money back?

Hey grossa2,
First, here is a way to report an issue with your purchase:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
http://support.apple.com/kb/HT1933
Then, I'd go through this article, which helps troubleshoot a lack of audio playback in iTunes:
iTunes and QuickTime for Windows: Audio does not play or plays incorrectly
http://support.apple.com/kb/TS1362
Take care,
Delgadoh

I have Windows 7 and just recently experienced a problem with itunes freezing up when I clicked on the "apps" tab. Everything else seems to work okay in itunes. I have uninstalled it and reloaded it 4 or 5 times, but still freezes up.

I have Windows 7 and just recently experienced a problem with itunes freezing up when I clicked on the "apps" tab which shows the apps that are loaded on my phone. Everything else in the itunes software seems to be working okay. The problem is in the part where you sync the newly purchased apps. The apps will all be blank that are downloaded and that part of the software crashes itunes or freezes up. I can get out of itunes okay after the freeze up, but it just stops me from syncing anything that I have newly added. If anyone has had this problem before or knows someone that has, please let me know how I can fix it. I have uninstalled and reloaded itunes 4 or 5 times, but the problem is still there. I might add that I have been using itunes and purchasing apps for 2 to 3 years without any problems. HELP.

You would get better response from the iTunes community forum.
Have a nice day!

Does anybody know if Windows 8 is causing a problem with iTunes? Many songs on my old iPod are now missing in my iTunes library and I can't find them anywhere. Also, I have a new iPod and am afraid of using it for fear of something else going wrong.

Does anybody know if Windows 8 is causing a problem with iTunes? Many songs on my old iPod are now missing in my iTunes library and I can't find them anywhere. . Also, I have a new iPod and am afraid of using it for fear of something else going wrong.

Try assigning Queen as the Album Artist on the compilations in iTunes on your computer.

Problems with itunes sound via bluetooth in windows 8

Similar Messages

Maybe you are looking for