Problems with iTunes Version 6

Please forgive me if this is a repeat of any kind. I searched on this issue and received way too many responses (mostly irrelevant!). When I try to launch certain radio stations in Version 6. It is sometimes difficult to even bring th station up. I sometimes have to click a dozen times to launch a station. Also, there is no meta data in the Player Window for may of the stations. I have a friend who has Version 4 and everything works great! The same stations I have trouble launching in Version 6, start right up in his Version 4.Also, meta data in that version 4 works for ALL stations!Does anyone know how to resolve these problems?

Hi beatlepat,
You might want to experiment with the buffer size settings to improve radio reliability. The settings are in iTunes Preferences -> Advanced tab. Try each of the possible "Streaming buffer" sizes to see if any of them reduce the frequency.
Also, make sure your QuickTime Connection Speed is one setting lower than the rate claimed for your Internet link. This setting is in QuickTime Control Panel, exit iTunes before changing the setting.
Good luck!

Similar Messages

  • Problems with Itunes New Version?

    Problems with Itunes New Version?
    Here is a copy of the error message. Every Time I listen to a song and it end and I go to listen to a new song the Itunes Freeze up. This is on the New Version of Itunes. I have a Windows 7 32bit 3GB Ram 1TB harddrrive Space
    <edited by host>
    Thanks,
    <edited by host>
    Fault bucket 1279649891, type 5
    Event Name: AppHangB1
    Response: Not available
    Cab Id: 0
    Problem signature:
    P1: iTunes.exe
    P2: 9.2.1.5
    P3: 4c47745b
    P4: e36b
    P5: 2048
    P6:
    P7:
    P8:
    P9:
    P10:
    Analysis symbol:
    Rechecking for solution: 1
    Report Id: 46dfdb3e-99a7-11df-8064-00038a000015
    Report Status: 0
    Fault bucket 1279649891, type 5
    Event Name: AppHangB1
    Response: Not available
    Cab Id: 0
    Problem signature:
    P1: iTunes.exe
    P2: 9.2.1.5
    P3: 4c47745b
    P4: e36b
    P5: 2048
    P6:
    P7:
    P8:
    P9:
    P10:
    Analysis symbol:
    Rechecking for solution: 0
    Report Id: 46dfdb3e-99a7-11df-8064-00038a000015
    Report Status: 0

    There certainly is a problem with itunes. I downloaded 9.2 and now it won't open. It won't recognize my iphone, either. I uninstalled it in the order recommended by the site, no joy. Deleted a configuration file, no joy. System Restore, no joy. All other software and hardware on the machine is working fine. I call AppleCare AND a local store, either they are completely clueless (which I doubt), or they have no idea how to fix it. I can't even back up my phone, or use the ipod. And since no one at Apple seems to care enough, I'll have to wait until the clamor is loud enough for them to even admit to a problem before I can use the ipod again.

  • IPhone 4 version 5.0 has sync problems with iTunes 10.5 on Mac OsX 10.6.8

    Hi there,
    I have Mac OsX 10.6.8, iTunes 10.5 and iPhone 4 version 5.0; all up to date.
    When I try to sync my phone with iTunes, the sync goes well until the apps start to sync .... then iTunes closes and I get varying error reports.
    I have tried updating everything (Mac, iTunes, iPhone) to no avail.
    I tried restoring the iPhone, that didn't help whatsoever.
    Does anyone have a solution? I am now tempted to downgrade to an earlier version of iTunes (ie: 10.4.3) as some people suggest in different posts.
    Thank you for your time in replying!
    Marmotte

    There is definitely a problem with iTunes 10.5 and iOS 5.0 syncing correctly.  I've seen lots of workarounds on the forums here.  Just search for it and see if you can come up with something that works.

  • Problems with Old version of iTunes!!!

    After finding out that my AOpen DVD drive is not compatible with ITunes version 6, I downloaded version 5 from oldapps.com. When I try to play a song or burn a cd, it tells me that my computer is not authorized. After authorizing it, a message says: "This item (song) requires a later version of ITunes to purchase". Of course I've alreay purchased these songs and simply want to play or burn them. Also, I have not authorized my songs on any computer but mine. Is there anyway to play and burn songs I've recently downloaded using an old version?

    DON'T UPGRADE!!! If you have seen any of the discussions regarding 7.5, and there are too many to count, you will know why. I avoided upgrading, the whole "if it isn't broke" theory, until I tried purchasing some new music and I was prompted that I had to upgrade in order to get the new music. I upgraded and now I can't burn the music I purchased. Trying to burn causes my computer to "crash". I've spent countless hours trying to figure this out, and frankly I'm afraid to connect my iPod for fear of what will happen to that. Read through some of the discussions regarding 7.5, I think you'll choose not to upgrade.

  • Is anybody else having problems with itunes (10.6.3.25) and ipod touch (5.1.1)?

    Lately I've been having a ton of problems with iTunes and my iPod Touch (4th generation). Lots of error messages such as can't connect to itunes store, incompatible application, ipod detected but not identifiable, invalid response received from device, unknown errors [mostly (0xE8000001)], problem with audio configuration, etc. I've done everything I could think of. Uninstalling iTunes (with all the components) then reinstalling with the newest version (10.6.3.25), running diagnostics and such. If it does appear (about 2% of the time) then iTunes freezes and/or it won't sync. I also try to change some info (song title, artist, artwork, etc)(when it DOES come up) and it shows up on itunes but not on my ipod. My ipod appears on my computer but not in iTunes under devices like its supposed to. I've been to all the support threads I can possibly find and NOTHING has helped. I also had the latest version for the ipod touch (5.1.1). And I've never had any issues with iTunes or my iPod touch before. I know I should probably try restoring my ipod but I absolutely do not want to do that unless I have to because i have a lot of music, apps, movies, etc I'm not able to back up. Also, I'm using a Windows 7 computer. Please Please help if you can, I am frustrated because I can't do anything.

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    If you've already tried a complete uninstall and reinstall try opening iTunes in safe mode (hold down CTRL+SHIFT as you start iTunes) then going to Edit > Preferences > Store and turning off Show iTunes in the Cloud purchases. You may find iTunes will now start normally.
    You could also try working through
    TS1717: iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    tt2

  • Problems with itunes 8 and ipod shuffle gen 2.

    Problems with itunes 8 and ipod shuffle gen 2.
    I recently upgraded from itunes 7 to itunes 8 on my windows XP PC. That's when i had issues syncing my 2nd gen shuffle.
    When i try to drag songs directly on it, itunes says i can't
    I made a playlist and use auto fill. But when I remove it from the dock, it's either not updated, or the new songs are at the bottom of the playlist when they are supposed to be up higher. I end up having to hit auto fill twice to make it sync correctly.
    Computer Specs
    Windows XP SP3
    384MB of Ram (works really good)
    USB 1.1 connection
    Pentium 4 clocked at 1.285 GHZ
    IPOD Shuffle Specs
    2nd Generation
    1GB (964MB)
    Version 1.0.4
    unchecked options: open itunes when ipod is attached, Sync only checked songs, convert higher bit rate songs to 128kbps AAC, Enable sound check, Limit MAX volume, enable disk use
    All those are NOT checked. Sometimes i enable disk use for seeing the IPOD_Control folder, but either way it still messes up.
    Itunes Specs:
    Version 8.1.1.10

    This is a well-known issue. Apple changed the internal file names used with iTunes 8, which makes the ordering on 2nd generation Shuffles behave differently. There is no good workaround, apart from moving the files with a hand-crafted AppleScript program.
    Apple has been silent on the issue, so nobody knows if we'll ever have a fix for it or not.

  • I am experiencing two problems with iTunes on my iPhone 5s.

    I am experiencing two problems with iTunes on my iPhone 5s.
    Issue 1: iTunes Match
    Some song playback is merging songs. I select “Song A” to be played and midway through the song it begins playing “Song B” however when I look at my phone it indicates that “Song A” is still playing even though the actual music is not “Song A”. I searched the Apple Support Community as well as the internet and this seems to be an ongoing issue back to 2012 that has not been resolved. All of the “fixes” that are provided do not work. For example, update/sync iTunes Match, delete the song from your iPhone and re-download from the cloud or delete the song from your iTunes including the iCloud and re-download. None of which worked. I even tried to complete erase the song from my computer hard drive and restarted my computer and then re-downloaded the song and it was still not working.
    Issue 2: iTunes Preview Track
    I am unable to preview any music on iTunes through the iTunes app on my phone. I have signed out of my user ID and restarted my phone and then logged back in and it did not fix the problem. My iTunes Match and iTunes radio are allowing me to play music. My software is up-to-date.

    Same problem here, Im running the latest version of iOS 7 on my iphone 5S (ipod 5S) bricked lol. It was working fine and then a mates baby grabbed my phone and dropped it (not very high) then it went off so i turned it on and BAM i got the grey backround with the apple logo on it so, I waited, Then it went to BSOD and got stuck in that loop, I then done a manual reset I was able to turn it off thats all. I tried restore in recovery mode with the latest itunes it come up with Unknown Error, error code (14) (something to do with unreconizable USB) tried many diffrent USB ports but sadly nothing, I then tried DFU mode with itunes still not working. Im really stuck on this one I need some assitance PLEASE! HELP!
    No aftermarket apps on iphone 5s
    Latest iOS 7 on iphone 5s
    Latest itunes 11.1.5.5
    Running Windows 7 (good comp)

  • Problems with iTunes 10.6.1 - rendering stops while playing music

    Hi everybody, I am writing because some problems with iTunes, that appeared currently. Never had this problems before... When playing music suddenly the rendering stops for several seconds and then it continues without any action from my side. Maybe the problem only shows up when my MacBook comes to the standby mode, but nevertheless, i never had this problem before and it really restricts the possibilities of enjoying music played by iTunes. Can you help me?
    Thanks and kind regards
    Christina

    I have an old macbook too.
    It seems like Apple writes new software that makes older computers not work as well.
    I always have reservations about updating with an older model.
    Does anybody else have any problems with the new iTunes?
      Model Name:          MacBook
      Model Identifier:          MacBook4,1
      Processor Name:          Intel Core 2 Duo
      Processor Speed:          2.4 GHz
      Number Of Processors:          1
      Total Number Of Cores:          2
      L2 Cache:          3 MB
      Memory:          2 GB
      Bus Speed:          800 MHz
      Boot ROM Version:          MB41.00C1.B00
      SMC Version (system):          1.31f1
      Serial Number (system):        
      Hardware UUID:        
      Sudden Motion Sensor:
      State:          Enabled

  • More problems with iTunes 9.1.0.79

    Hi,
    since I have had my iPhone I have upgraded itunes a couple of times and never had any problems until now.
    I upgraded to 9.1.0.79 two days ago and am having all sorts of issues.
    Now when itunes starts it takes ages.
    When my iphone is connected I get a message saying:-
    +itunes cannot sync information with the iphone 'iphone' because syncing has been disabled on this computer+
    I click the yes button to enable syncing and then receive an error message:-
    +itunes was unable to load provider data from sync services reconnect or try again later+
    I then click OK and my phone appears in the devices list.
    These error messages happen every time I start itunes, so by me clicking the yes button to enable syncing does absolutely nothing.
    My iphone will sync fine just that itunes tends to freeze up and is very slow.
    I run a diagnostic from the help menu and without my iphone connected it shows a red dot next to 'No iPhone or iPod found', which is correct but when I have my iphone connected this red dot is now orange, what is the difference in colour?
    I have turned of all anti-virus and firewall software but itunes is still the same, very unresponsive, so anti-virus/firewall is not the problem.
    I followed to the letter:-
    http://support.apple.com/kb/HT1925 and totally uninstalled everything and then reinstalled itunes only to find the same problem persisting.
    This is definitely a problem with itune 9.1.0.79 and apple should be addressing it pronto.
    Here is the data from the diagnostic run and it shows my iphone as not found even though it is connected, showing in devices and I can sync to it, wierd!!
    Microsoft Windows XP Professional Service Pack 3 (Build 2600)
    To Be Filled By O.E.M. To Be Filled By O.E.M.
    iTunes 9.1.0.79
    QuickTime 7.6.6
    FairPlay 1.7.16
    Apple Application Support 1.2.1
    iPod Updater Library 9.0d11
    CD Driver 2.2.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 3.0.0.102
    Apple Mobile Device Driver 1.46.0.0
    Bonjour 2.0.0.34 (214.3)
    iTunes Serial Number **************
    Current user is an administrator.
    The current local date and time is 2010-04-12 20:39:07.
    iTunes is not running in safe mode.
    Video Display Information
    ATI Radeon HD 2600 XT AGP
    ** External Plug-ins Information **
    No external plug-ins installed.
    ** iPod/iPhone Connectivity Tests **
    iPodService 9.1.0.79 is currently running.
    iTunesHelper 9.1.0.79 is currently running.
    Apple Mobile Device service 3.0.0.0 is currently running.
    Universal Serial Bus Controllers:
    VIA Rev 5 or later USB Universal Host Controller. Device is working properly.
    VIA USB Enhanced Host Controller. Device is working properly.
    FireWire (IEEE 1394) Host Controllers:
    VIA OHCI Compliant IEEE 1394 Host Controller. Device is working properly.
    Most Recent Device Not Currently Connected:
    iPhone 3GS running firmware version 3.1.3
    Serial Number: *********
    ** iPhone/iPod touch Sync Tests **
    Sync tests completed successfully.
    I have blanked out serial numbers etc..
    Regards..,
    K :0(

    notice how under diagnostics readout it shows "most recent device not currently connected"
    mine does same thing and i have iphone connected when i do it.
    my problems also started with this update and i show 4 errors in event viewer which is under adminastrative tools in control panel.
    MY problem is super slow backups for a 16gb 3Gs with 12gbs free. a backup used to be done in like 30-45 seconds now takes about 5 minutes and looks as if it stals at a few points when looking at bar at top of itunes.
    my iphone shows up in itunes and shows all pages etc. i do everything manually although i do sync apps.
    everytime i connect iphone and open itunes i get 4 errors thats show up only in event viewer (but anyone who maintains computers should be aware of all tools available to them to see whats going on in the background) that show up for "BONJOUR" i have posted this here and under bonjour forum. i turned off bonjour services the proper way again thrru adminastrative tools>services double click bonjour and change for "automatic to "disabled". don't do it through msconfig as some would tell you to do if it's a bonjour issue.
    but checking out event viewer can give you valuable info so you don't do the apple nonsense wasting hours to clean up their messy installation only to have it do exact same thing again. it's obvoius they have a conflict.... now we can only hope for a resolution ie UPDATE if enough complain by sending them all this.
    i don't have a jailbreak phone nor am i rebuilding anything i'll live with it till they fix it as my event viewer log isn't getting filled up with bonjour errors anymore nor do i need all this bloated crap apple sends our way... i do have quicktime pro.

  • I have a problem with iphoto (have a mac book pro): the icon in the dock appears with a question mark, and the application is gone!!! Can someone tell what's going on? Yesterday I had the same problem with itunes

    I have a problem with iphoto (have a mac book pro): the icon in the dock appears with a question mark, and the application is gone!!! Can someone tell what's going on? Yesterday I had the same problem with itunes: I downloaded the last version (it's free), but I cannot do the same with iphoto, and more important: I need to know what is happening!!! Please help me!

    Applications should not disappear all by themselves.
    If they are then that coud indicate serious problems with your hard drive.
    Backup everything up as quickly as possible.
    Using Disk Utility verify your system disk.
    Allan

  • Two problems with iTunes (permissions issue?)

    Hello,
    I have two problems with iTunes. I am not sure if they are related that's why I post them both.
    1) iTunes doesn't delete apps after updating them anymore. This is happening since the (two?) last versions of iTunes and is the same with 10.5. The reason seems to be the permissions of the apps. Nearly all have "everyone = custom". Therefore I have to enter my admin password when I try to delete them manually. And iTunes itself cannot delete them on its own, of course. Why is this happening? Why is iTunes assigning such permissions to downloaded apps?
    2) I can't login to my account from within iTunes anymore. That is also happening since quite a while. I am logged in (my ID is shown in the top right of the store) but cannot access my account details. iTunes asks for my password but after entering it the login mask appears again. It's not the password itself, it is correct.
    Any suggestions?

    Correct answer to find here:
    https://discussions.apple.com/thread/1215039?start=0&tstart=0

  • TS5376 I'm having problems with install version 11.1.4. If I uninstall and reinstall will I lose all my downloaded music?

    I'm having problems with install version 11.1.4. If I uninstall and reinstall will I lose all my downloaded music?

    Hi, so did I.  It seems to be a huge problem with everyone.  I opened a folder on desktop and called it target.  I copied all my songs into that folder.
    I uninstalled Itunes completely.  Rebooted.  Then I installed a fresh install.
    I then dragged all the songs back to Itunes and it worked.  I hope that helps. 
    I read an article the other day and apple is suppose to come out with some genius fix for this problem, it really seems to be global.
    Good luck,

  • Weird intermittent problems with itunes

    I had problems with info getting greyed out when looking at music library. One data field was greyed out and this occurred intermittently throughout the library.
    So the only way I could fix it was to edit the data entry, add a space at the end of it and press enter. Then go back and re-edit it and remove the space.
    I also had problems trying to edit data in the data fields. The data field kept getting reset to what was in there after editing and erasing the info in the data field. This happened for about half an hour. Each edit was undone.
    Is this just a problem with version 7.2? Seems that a lot of weird problems occured after upgrading to that version. Now that a newer version has come out, I hope the issues will be gone.

    I also had strange problems with Itunes saying I did not have access or something to convert some files to other formats. I checked the library folder and the files and had the proper priviledges to access the files. However, Itunes refused to let me convert the files so I had to run quicktime which converted the files without a hitch.

  • TS4123 I have problem with iTunes story (secure link to itunes store failed). I make In the "Command Prompt" screen, type in   netsh winsock reset the itune story is solve but after i close itunes the problem is back

    I have problem with iTunes story (secure link to itunes store failed). I make In the "Command Prompt" screen, type in   netsh winsock reset the itune story is solve but after i close itunes the problem is back

    The results show that you have a proxy server set and this can often cause problems with iTunes.
    The proxy setting can be accessed in Internet options>>Connections>>LAN Settings.
    Try un-checking the proxy server check box.
    It might also be a good idea to run a malware check if you didn't know you had the proxy server set.
    You can download a free version of an excellent scanner- Malwarebytes here:
    http://www.malwarebytes.org/

  • ITunes has stopped working.  Problem with iTunes Helper Module

    After i installed the 7.3.1 iTUNES update for my windows VISTA, i keep getting iTunes has stopped working, and a message saying there is a problem with iTunes Helper Module.. I've tried to re-install and everything.. Can anyone help me out?

    here you go
    Problem signature
    Problem Event Name: APPCRASH
    Application Name: iTunesHelper.exe
    Application Version: 7.3.1.3
    Application Timestamp: 468d67e8
    Fault Module Name: QuickTimeStreamingAuthoring.qtx
    Fault Module Version: 7.2.0.240
    Fault Module Timestamp: 4684a83a
    Exception Code: c0000005
    Exception Offset: 00016c09
    OS Version: 6.0.6000.2.0.0.768.3
    Locale ID: 1033
    Additional Information 1: 18fe
    Additional Information 2: f42ba5cd8b2ed31f18b99a5ea46137af
    Additional Information 3: 4735
    Additional Information 4: ae0a749503b699b3b75d581a3dbfd557
    Extra information about the problem
    Bucket ID: 466198587

Maybe you are looking for

  • How to share one itune library among 3 computer at home

    I have 2 desktop and one laptop in my home and would like to know how to setup so that all 3 computers uses the same itune library

  • Spry - how to use it

    I downloaded "Building a photo album with the Spry framework" from the developer center. Its a fine bit of work, and I have modified it to suit most of my purposes. However, I cannot figure out how to make it add a property to one of the nodes - in o

  • Scripts to start stop SAP HANA

    Hi Everyone, I need to call the script to stop and start sap hana via API. Does any one knows about any API that can be used to do this. I am aware of CLI but I need some API like REST API or XS which will help to do the os level triggering. Thanks,

  • Mapping a property to a Studio Database Field

    Can anyone tell me how I can map one of our user properties to a studio database field. We would like for the record browser portlet to show the user's "Employment Level" without having the user enter that info in the form. Thanks.

  • Problem with thousands separator

    Hi, I'am working on dunning letters print and i've a problem with the thousands separator. Data is stored in a table field typed CURR. The intern format is 119600,60 When i print directly this value on my SmartForm, there are many blanks before the n