Problems with iWeb and mobile me
Ciao everyone,
I've been having a ridiculous amount of problems with my mobile me account and my iweb. 2 weeks ago I was fine with my iweb and mobile me but all of a sudden my iweb would say it publish but it really doesn't publish. The I went to the mac store a couple of times and thought I would get answers but I didnt get any answer even though I had a couple of one to one visits with a couple of stores in NYC. So when i publish it it shows that it published in my www.me.com/idisk/iweb folder but then it doesn't show in my website. Then one guy told me that I should just recreate a new site but copy and past all the old information to the new one. Now it won't publish at all because I guess its a lot of information to publish at once. I get an error message saying error iweb was not able to publish please try again later. Any help?
Hey you guys,
Thanks for the help, but I did try to publish all to my iweb and it didn't work. I do try to view my published website through the file/visit published site and for some reason only my intro page is there then when i go into the main page i get an error page. I also did go to my finder/Go/idisk/myidisk/iweb/site/iweb and saw my websites folder. Everything seems to be in it. I tried to take a screen shot of what is in my folder but I can't post pictures. In my folder I have a folder for gallery, index.html, site, shites.rss, and my website folder usvisualswebsite
Any other suggestions? This is really frustrating. I also created another test site with nothing in it and published it and it says it finishes publishing but the blank test page isn't there.
Similar Messages
-
We have a website that has run successfully using iWeb and Mobile me. We understand Mobile Me is being discontinued from June. From this forum it seems iWeb also is not being supported any more. So can the existing site be hosted successfully with another provider or is it best to start again. If so any advice on options would be very welcome;
Thanks
PBFor the most part if you just get a new webhost you can continue to run with iWeb. Since you are still running Tiger iWeb should work just fine for you. You will simply need to publish your website to a folder or with the built in FTP in iWeb. Apple has simply quit updating iWeb & there will come a day when iWeb quits working in the later OS's whatever kitty comes after Lion.
Here's a link to who I use for Hosting:
http://jeffnitschke.com/wordpress/?p=84 -
Problems with iweb and Internet Explorer
I'm having trouble with my iweb website - PC users using Internet Explorer can access my site home-page but find the navigation bar is blocked - covered by a green rectangle which does not allow the links to be explored. With Safari and Firefox the website works properly. Has anyone else experienced this?
Transparency (opacity in CSS) is one of those things that's used by those who know nothing about it or those who know a lot about and is best avoid by all the rest of us!
To create a class "transparent" to cover all bets would require something like this...
.transparent {
/* Required for IE 5, 6, 7 */
/* ...or something to trigger hasLayout, like zoom: 1; */
width: 100%;
/* Theoretically for IE 8 & 9 (more valid) */
/* ...but not required as filter works too */
/* should come BEFORE filter */
-ms-filter:"progid:DXImageTransform.Microsoft.Alpha(Opacity=50)";
/* This works in IE 8 & 9 too */
/* ... but also 5, 6, 7 */
filter: alpha(opacity=50);
/* Older than Firefox 0.9 */
-moz-opacity:0.5;
/* Safari 1.x (pre WebKit!) */
-khtml-opacity: 0.5;
/* Modern!
/* Firefox 0.9+, Safari 2?, Chrome any?
/* Opera 9+, IE 9+ */
opacity: 0.5;
For modern browsers we can use this...
.transparent {
zoom: 1;
filter: alpha(opacity=50);
opacity: 0.5;
But how do we know what our visitors are using? -
Problems with iweb and safari - 'buttons' not working in safari/firefox...
Hello. Help! I've been using iweb for a while with no probs - but on trying to launch my most recent site I'm finding the navigation buttons (graphic images not text buttons) work fine in iweb on my mac, plus fine on a PC but only partially in safari/firefox browsers... see sarahgreen.me and you will see that none of them work on the home page. Is this some kind of bug? I was wondering if it is anything to do with there being too many objects on the page or something? They are fine on a PC.
Thanks for any ideas.
SarahIn iWeb do Command-Shift-L to see the layout of the page.
The content in the Navigation layer is blocking the content of the Header layer. The body layer is empty.
Move ( +Use Command-drag+ ) EVERYTHING in the Navigation layer and EVERYTHING in the Header layer INTO the Body layer.
Put content where it belongs.
Message was edited by: Wyodor -
Problem with Lion and mobile device
I can access the web only through a mobile pen drive. Lion can't make the access because need a java run time for the mobile device and can't get the run time because not internet connected!
So for reference, in case other people are experiencing this problem...
It seems to be happening to iMacs running Lion and using bluetooth keyboard and/or mouse and/or trackpad. What happens is when you turn the computer on and the bluetooth devices on at the same time Lion can't find them, panics and starts up in Safe Mode. That is why functionality (including network) is limited. Restarting the computer seems to fix the problem and Safe Mode is avoided on the second boot up.
The fix is apparently (and it works) to turn the iMac on and wait for the grey background and apple logo. Wait for the spinning circle/clock face to stop and vanish, then turn the bluetooth devices on when you see your desktop. I've been doing it for the last ten days and it's worked perfectly every time.
In the mean time, Apple please can you recognise this as an issue and fix it?! -
In IOS7 none of my YouTube movies show up on my site build with iWeb and its YouTube widget. On an iPad running IOS6 the site still works fine, and all movies play well. What is going on,and what can I do to solve this problem ???
It's only Safari/iOS7. Chrome iOS7 works fine.
Solution?
Go to YT and grab the code.
Paste it in a HTML Snippet. -
I am sorry if thie is republished-My first time doing this and I am not sure what goes where and where to hear feedback.
Have published iweb site for five years with no problems and just opened a new site and get -
404: Page not found
This error is generated when there was no web page with the name you specified at the web site.-
Troubleshooting suggestions:
Ensure the page you are linking to exists in the correct folder.
Check your file name for case sensitivity . Index.htm is not the same as index.htm!
Temporarily disable any rewrite rules by renaming your .htaccess file if it exists
is the problem with
iweb or with hosting?
One Apple tech started to fix Iweb and had to end session and the next said problem with hosting at Network Solutions as it published
to local folder. NWS has checked sttting a few times-
Any help would be extremely appreciated as trying to fix this for about five weeks
Thanks VG
<Email Edited by Host>It's a really bad idea to post your email address - it's an invitation to spam - and I've asked the Hosts to remove it. (Even though I've now noticed you mis-spelled it! - anyway, never post your address in a forum.)
You have a site here: http://virginiagordon.com/www.virginiagordon.com/WELCOME.html
If that's not the page you are having trouble with, what is that page's URL? -
I have a problem with my PC mobile device that the keyboard stop working and the mouse also
I have a problem with my PC mobile device that the keyboard stop working and the mouse also
All I can suggeset is:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
or
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
Have you looked at the AMDS topic of:
iOS: Device not recognized in iTunes for Windows
Do you have han image capture programs linstalled like for a camers or scanner? -
My website created with Iweb and hosted on mobileMe is not uploading well on all computers. What could be the problem ?
I got a chance to look at it on a PC. Totally hosed up. It loads incorrectly then parts of it go blank.
I have a site that is based very much on one of the built-in templates and it works fine on the same PC. It contains only text boxes, image placeholders, and images with "picture frame" borders. Nothing fancy, no overlays, no extra code or anything. I haven't looked much at the other templates so I don't know if yours is mostly a template or how much you may have modified one or what tricks you may have done to get the look you wanted. Whatever it is, IE does not like it. Unfortunately, you can't really ignore them as was suggested; they make up a large part of your audience. -
A fix to personal web domain name problem between iWeb and GoDaddy
There are numerous posts about problems with iWeb understanding both your personal name domain with and without the www.prefix. After five days, 25 calls to both Apple and GoDaddy where I was getting much conflicting advice even within each organization, and I experienced many problems such as the site not being found and iWeb asking for password authorization whenever anyone visited the site. The good news is that I was finally able to resolve the problem with these simple steps:
First, check that your Web site actually exists by going to http://web.mac.com/yourusername
If that works then you need to set up a forward in GoDaddy.
In GoDaddy's account manager, make sure that the forwarding address is set to http://web.mac.com/yourusername. This must be the same address that you just checked through your browser. (I also advise you to NOT USE the .ME designation that Apple is moving to. It's not solid yet. .MAC will work for a long time. It's web.mac.com/ that will work).
Then click on the Total DNS Control and MX Records link.
This is where my instructions that work differ from many other instructions, but heed my advice and you'll save a lot of time.
Look in the CNAMES area and make sure that the www host alias points to "@" and not to anything else such as "web.me.com" or "www.mac.com". If you don't have such an entry, then create one by clicking on the "add a new CNAME Record"button. Caution - if you don't use the "@" (at sign) here you WILL run into trouble where your custom domain name will only work WITHOUT a "www." prefix. (While this may not be a problem for your mac friends, most everyone using a PC will think they need to type in a "WWW." and that will cause a problem).
Then if you wish, you can also go back into your domain forwarding area and click on the masking tab and click to enable masking. This will make your url only show the short personal domain name rather than the very long iWeb mobile me URL appended with your personal domain name.
Confirm your entry, and then wait anywhere from 20 minutes to four hours or more for the tens of thousands of servers around the world to repopulate those instructions. I was able to see a change take place in minutes where my associate in another state didn't see the change for two hours. Don't worry, just wait.
If you do this, you should be able to then go to your Web site through either www.YourPersonalDomainName.com or YourPersonalDomainName.com
Good luck!I was finally able to resolve the problem with these simple steps:
Many people would not be interested in using url forwarding/masking as you suggest to solve this issue, since that makes it impossible to bookmark individual pages of your site. For those who do wish to set the www CNAME to web.mac.com, I think the problem can normally be solved by also setting the @ A Record to 17.250.248.34. -
Voice problems with Lync 2013 Mobile
Hi
I have a situation where Lync 2013 on both iPhone & Android has started giving problems with making and receiving voice calls. There are no problems with Windows, Mac or Phone Edition clients that I'm aware of. I have not tested anything over the VPN,
but this should not be a factor.
For receiving calls - If the user is connected to the LAN via Wi-Fi AND the call is from an internal user, all works fine. If the call is from an external user OR the user is connected via 3G, then the call just shows "Connecting" indefinitely.
This includes transferred calls.
For making calls - If the user is connected to the LAN via Wi-FI and calls either an internal or external users, all works fine. If the user is connected via 3G and calls either an internal or external user, the phone rings, but when it's answered it shows
call ended.
I have ran RUCT on a computer outside the network, with the following findings:
DNS:
Record
Type
Hostname
IP Address
Port
Weight
Priority
_sip._tls.domain.com
SRV
sip.domain.com
Edge External IP
443
100
0
sip.domain.com
A
sip.domain.com
Edge External IP
sipexternal.domain.com
A
sipexternal.domain.com
Edge External IP
meet.domain.com
A
meet.domain.com
<null>
_ntp._udp.domain.com
SRV
pool.ntp.org
NTP Server IP
123
100
0
_sipfederationtls._tcp.domain.com
SRV
sip.domain.com
Edge External IP
5061
100
0
lyncdiscover.domain.com
A
sip.domain.com
Edge External IP
lyncdiscover.domain.com
CNAME
sip.domain.com
I have ran Test Port on each entry where there is a port with successful results. Ping works on all entries.
If I query Certificate Information on sip.domain.com with port 5061 or 444, it succeeds and returns the certificate with subject sip.domain.com. If I query 443, it fails with error "An error occurred while retrieving the certificate. Unable to read
data from the transport connection: An existing connection was forcibly closed by the remote host."
On Microsoft Remote Connectivity Analyzer, all tests pass except for the certificate test:
The Microsoft Connectivity Analyzer is attempting to obtain the SSL certificate from remote server sip.domain.com on port 443
The Microsoft Connectivity Analyzer wasn't able to obtain the remote SSL certificate.
Running netstat on Lync Edge gives me the following with regards to port 443:
TCP <Internal IP>:443 Lync2:0 LISTENING
TCP <External IP>:443 Lync2:0 LISTENING
Firewall allows connections on port 443 and I've tried disabling the firewall as well. Trying to open https://sip.domain.com in the browser on the Lync Edge fails also, telnet succeeds, but no data is returned.
I've restarted the AV service and also rebooted the Lync Edge server, no change. In the topology builder, I can see that AV is configured to listen on port 443.
Any ideas would be most welcome.
Regards
Lionel
MCP Windows Server MCTS .NETI have ran a large amount of additional tests. On my latest round of testing, I have obtained the following results:
Call received via PSTN gateway on user DID, answered by desktop client inside LAN - works.
Call received via PSTN gateway on response group, answered by desktop client inside LAN - works.
Call received via PSTN gateway on user DID, answered by desktop client outside LAN (behind NAT, DSL router) - works.
Call received via PSTN gateway on response group, answered by desktop client outside LAN (behind NAT, DSL router) - works.
Call received via PSTN gateway on user DID, answered by mobile client inside LAN - does not work.
Call received via PSTN gateway on response group, answered by mobile client inside LAN - does not work.
Call received via PSTN gateway on user DID, answered by mobile client outside LAN (behind NAT, DSL router) - works.
Call received via PSTN gateway on response group, answered by mobile client outside LAN (behind NAT, DSL router) - works.
Call received via PSTN gateway on user DID, answered by mobile client outside LAN (3G) - does not work.
Call received via PSTN gateway on response group, answered by mobile client outside LAN (3G) - does not work.
Call received via PSTN gateway on user DID, answered by desktop client inside LAN and transferred to mobile client inside LAN - does not work.
Call received via PSTN gateway on response group, answered by desktop client inside LAN and transferred to mobile client inside LAN - does not work.
Call received via PSTN gateway on user DID, answered by desktop client inside LAN and transferred to mobile client outside LAN (behind NAT, DSL router) - works.
Call received via PSTN gateway on response group, answered by desktop client inside LAN and transferred to mobile client outside LAN (behind NAT, DSL router) - works.
Call received via PSTN gateway on user DID, answered by desktop client inside LAN and transferred to mobile client outside LAN (3G) - does not work.
Call received via PSTN gateway on response group, answered by desktop client inside LAN and transferred to mobile client outside LAN (3G) - does not work.
Call made through PSTN gateway from desktop client inside LAN - works.
Call made through PSTN gateway from desktop client outside LAN (behind NAT, DSL router) - works.
Call made through PSTN gateway from mobile client inside LAN - does not work.
Call made through PSTN gateway from mobile client outside LAN (behind NAT, DSL router) - works.
Call made through PSTN gateway from mobile client outside LAN (3G) - does not work.
Call from desktop client inside LAN to desktop or mobile client (regardless of location) - works.
Call from desktop or mobile client (regardless of location) to desktop client inside LAN - works.
Call from desktop or mobile client (regardless of location) to desktop or mobile client (regardless of location) - works.
There is no difference in behaviour between normal calls and conference calls. Reproducing the problem seems to require the following:
1. PSTN gateway needs to be involved
2. One party needs to be on mobile client
3. The mobile client needs to be inside the LAN or on a 3G connection, but not behind NAT on a DSL connection
The only conclusion I can make is that somehow NAT makes the problem go away, but it does not affect desktop clients (on the LAN or Wi-Fi at least, I do not have a way to test them on 3G).
The PSTN gateway (Cisco UCM) could also be the problem, but it works fine in all other cases. It has 4 trunks and makes all kinds of routing decisions, but once a call is routed to/from Lync, it should not make a difference on what type of device it is answered.
I'm really baffled by this one. Perhaps the 3G thing is a service provider issue and the issue on the LAN has something to do with the internal DNS combined with the behaviour of the mobile client. Just not sure exactly what.
MCP Windows Server MCTS .NET -
Problem with redirection and google analytics
Hello,
I created my professional website with iweb and bought a domain name for it can be simplest to remember, so this professional domain name (www.julienchabot.com) redirect to the iweb url (web.mac.com/julienchabot/iweb/com/home.html). Now I subscribed to Google Analytics to know the statistics of my website, but it seems that when people visit www.julienchabot.com, google analytics doesn't register any visit on my website, it only registers something when the iweb url (web.mac.com/julienchabot...) is visited, so only when I visit my website as a webmaster because I'm the only one to know this url.
So it's very frustrating for I can't know the statistics even if Google analytics seems to provide fantastics results !!!
However, when we're on julienchabot.com and that we read the source code, the correct code and iweb url appear on the top of the window... Does the problem come from the redirection company I subscribed to ?
Has someone a solution to this problem ?
Thank you very much for your help !!
JulienDear Gretsch,
Thank you for this website, I just registered but unfortunately the problem is still the same ! I think it's due to the redirect company I subscribed to, they use "frames" for the redirection.
Do you use frames as well for your website ? StatCounter asks if it's the case before providing the code and I replied "yes", they specify to put the code in the main page where there's not the "frame" code, but I don't know where this "frame" code is written, so I put the StatCounter code on the homepage one, but it's the same than with Google.
Would you mind provide me the url of your website for I can compare your code to mine ?
Thank you very much for your help !
Julien -
My wife has been having problems with Safari, and many third party software and malware programs infecting her Mac Book Pro. I have tried to reset Safari but it keeps coming back, taking over Safari, changing defaults, start pages, and search engines, Etc.
Is it safe to use programs like MacKeeper, who keeps send my wife's computer message and alerts, or should I just wipe the drive and start over?
SkipI am having lot's of lag time with Safari, etc..
I'll type in a website.. and it will take 15-20 seconds to start..
Start time: 17:51:37 12/02/14
Model Identifier: MacBookPro11,3
System Version: OS X 10.10.1 (14B25)
Kernel Version: Darwin 14.0.0
Time since boot: 14 days 3:02
USB
My Passport 07B8 (Western Digital Technologies, Inc.)
Diagnostic reports
2014-11-13 QuickLookSatellite crash x2
2014-11-21 com.apple.WebKit.Plugin.64 crash
Log
Nov 30 21:32:39 PM notification timeout (pid 345, Adobe CEF Helper)
Nov 30 21:32:39 PM notification timeout (pid 99018, CEPHtmlEngine)
Nov 30 21:32:39 PM notification timeout (pid 99019, CEPHtmlEngine He)
Dec 1 09:09:03 [[0xffffff802bfa4000] OpCode 0x0C01 (Set Event Mask) from: kernel_task (0) Synchronous status: 0x00 (kIOReturnSuccess) state: 2 (BUSY) timeout: 5000] Bluetooth warning: An HCI Req timeout occurred.
Dec 1 09:52:03 PM notification timeout (pid 266, Creative Cloud)
Dec 1 09:52:03 PM notification timeout (pid 346, Adobe CEF Helper)
Dec 1 09:52:03 PM notification timeout (pid 345, Adobe CEF Helper)
Dec 1 10:04:37 process WindowServer[114] caught causing excessive wakeups. Observed wakeups rate (per sec): 170; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 12755007
Dec 1 10:31:08 ALF: ifnet_get_address_list_family error 12
Dec 1 10:59:17 process Meeting Center[2921] caught causing excessive wakeups. Observed wakeups rate (per sec): 647; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 45104
Dec 1 12:24:35 process com.apple.WebKit[4567] caught causing excessive wakeups. Observed wakeups rate (per sec): 297; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 76962
Dec 1 14:31:01 process com.apple.WebKit[7400] caught causing excessive wakeups. Observed wakeups rate (per sec): 397; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 53188
Dec 1 14:43:52 process com.apple.WebKit[7400] caught causing excessive wakeups. Observed wakeups rate (per sec): 224; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 150084
Dec 1 14:47:34 process com.apple.WebKit[7400] caught causing excessive wakeups. Observed wakeups rate (per sec): 332; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 222103
Dec 1 15:03:29 process com.apple.WebKit[7400] caught causing excessive wakeups. Observed wakeups rate (per sec): 214; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 370572
Dec 1 16:38:03 SIOCPROTODETACH_IN6: utun2 error=6
Dec 1 16:38:08 SIOCPROTODETACH_IN6: utun2 error=6
Dec 1 20:08:30 jnl: disk3s2: replay_journal: from: 112328704 to: 113115136 (joffset 0x3a38000)
Dec 1 20:08:30 jnl: disk3s2: journal replay done.
Dec 1 20:27:11 com.adobe.acc.AdobeCreativeCloud.75292.UUID: Service exited with abnormal code: 5
Dec 2 08:23:00 process com.apple.WebKit[11891] caught causing excessive wakeups. Observed wakeups rate (per sec): 161; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 527508
Dec 2 09:29:37 firefox (map: 0xffffff80317c5960) triggered DYLD shared region unnest for map: 0xffffff80317c5960, region 0x7fff9ae00000->0x7fff9b000000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
Dec 2 10:04:39 SIOCPROTODETACH_IN6: utun2 error=6
Dec 2 10:04:44 SIOCPROTODETACH_IN6: utun2 error=6
Dec 2 16:42:24 process com.apple.WebKit[26151] caught causing excessive wakeups. Observed wakeups rate (per sec): 153; Maximum permitted wakeups rate (per sec): 150; Observation period: 300 seconds; Task lifetime number of wakeups: 45002
Swap (MiB): 41556
Activity
Net: 210 in, 20 out (KiB/s)
Memory: kernel_task (UID 0) is using 1632 MB
kexts
com.cisco.kext.acsock (1.1.0)
com.wdc.driver.USB.64.10.9 (1.0.1)
Daemons
com.cisco.anyconnect.vpnagentd
com.oracle.java.JavaUpdateHelper
com.apple.installer.osmessagetracing
com.microsoft.office.licensing.helper
com.google.keystone.daemon
com.wdc.WDSmartWareService
com.oracle.java.Helper-Tool
com.adobe.fpsaud
com.wdc.SmartwareDriveService
Agents
com.adobe.AdobeCreativeCloud
com.zimbra.desktop
com.citrix.ServiceRecords
com.google.keystone.system.agent
com.apple.photostream-agent
com.genieo.completer.download
com.genieo.completer.update
com.cisco.anyconnect.gui
com.citrix.ReceiverHelper
com.citrix.AuthManager_Mac
com.citrix.FMDAgent.14800.UUID
com.oracle.java.Java-Updater
com.fiplab.MailTabProHelper
com.adobe.PDApp.AAMUpdatesNotifier.74724.UUID
com.citrixonline.GoToMeeting.G2MUpdate
com.apple.AirPortBaseStationAgent
com.microsoft.SyncServicesAgent
Startup items
/System/Library/StartupItems/ciscod/ciscod
/System/Library/StartupItems/ciscod/StartupParameters.plist
Bundles
/System/Library/Extensions/hp_fax_io.kext
- com.hp.kext.hp-fax-io
/System/Library/Extensions/hp_Inkjet1_io_enabler.kext
- com.hp.print.hpio.Inkjet1.kext
/System/Library/Extensions/hp_Inkjet4_io_enabler.kext
- com.hp.print.hpio.Inkjet4.kext
/System/Library/Extensions/hp_Inkjet8_io_enabler.kext
- com.hp.print.hpio.inkjet8.kext
/System/Library/Extensions/JMicronATA.kext
- com.jmicron.JMicronATA
/System/Library/Extensions/WD1394_64_109HPDriver.kext
- com.wdc.driver.1394.64.10.9
/System/Library/Extensions/WDUSB_64_109HPDriver.kext
- com.wdc.driver.USB.64.10.9
/Library/Extensions/hp_io_printerclassdriver_enabler.kext
- com.hp.hpio.hp-io-printerclassdriver-enabler
/Library/Internet Plug-Ins/AdobeAAMDetect.plugin
- com.AdobeAAMDetectLib.AdobeAAMDetect
/Library/Internet Plug-Ins/CitrixICAClientPlugIn.plugin
- com.citrix.citrixicaclientplugIn
/Library/Internet Plug-Ins/Flash Player.plugin
- N/A
/Library/Internet Plug-Ins/googletalkbrowserplugin.plugin
- com.google.googletalkbrowserplugin
/Library/Internet Plug-Ins/JavaAppletPlugin.plugin
- com.oracle.java.JavaAppletPlugin
/Library/Internet Plug-Ins/npg.plugin
- npg.graphon.com
/Library/Internet Plug-Ins/o1dbrowserplugin.plugin
- com.google.o1dbrowserplugin
/Library/Internet Plug-Ins/SharePointBrowserPlugin.plugin
- com.microsoft.sharepoint.browserplugin
/Library/Internet Plug-Ins/SharePointWebKitPlugin.webplugin
- com.microsoft.sharepoint.webkitplugin
/Library/Internet Plug-Ins/Silverlight.plugin
- com.microsoft.SilverlightPlugin
/Library/Internet Plug-Ins/SlingPlayer.plugin
- com.slingmedia.slingplayer.plugin.nspapi
/Library/PreferencePanes/Flash Player.prefPane
- com.adobe.flashplayerpreferences
/Library/PreferencePanes/FMDSysPrefPane.prefPane
- Citrix.FMDSysPrefPane
/Library/PreferencePanes/JavaControlPanel.prefPane
- com.oracle.java.JavaControlPanel
/Library/PreferencePanes/WDQuickViewPrefsPane.prefPane
- com.westerndigital.quickview.prefpanel
/Library/PreferencePanes/Zimbra.prefPane
- com.zimbra.prefpanel
/Library/ScriptingAdditions/Adobe Unit Types.osax
- N/A
Library/Address Book Plug-Ins/SkypeABDialer.bundle
- com.skype.skypeabdialer
Library/Address Book Plug-Ins/SkypeABSMS.bundle
- com.skype.skypeabsms
Library/Internet Plug-Ins/CitrixOnlineWebDeploymentPlugin.plugin
- com.citrixonline.mac.WebDeploymentPlugin
Library/Internet Plug-Ins/Google Earth Web Plug-in.plugin
- com.Google.GoogleEarthPlugin.plugin
Library/Internet Plug-Ins/WebEx.plugin
- com.webex.WebEx
Library/Internet Plug-Ins/WebEx.plugin/Contents/Resources
- com.webex.WebEx
Library/Internet Plug-Ins/WebEx64.plugin
- com.cisco_webex.plugin.gpc64
dylibs
/usr/lib/libaudioc.dylib
/usr/lib/libclipc.dylib
/usr/lib/libcs.dylib
/usr/lib/libdc.dylib
/usr/lib/libfilec.dylib
/usr/lib/libMonoPosixHelper.dylib
/usr/lib/libpbr.dylib
/usr/lib/libprintc.dylib
/usr/lib/libsc.dylib
/usr/lib/libSFFileMonitor.32.dylib
/usr/lib/libSFIPC.32.dylib
/usr/lib/libSFIPC.I.dylib
/usr/lib/libSFsqlite3.7.4.dylib
/usr/lib/libSFSyncEngine.I.dylib
/usr/lib/libupc.dylib
App extensions
it.bloop.airmail.beta10.Airmail-Today-Beta
it.bloop.airmail.beta10.Airmail-Composer-Beta
com.wunderkinder.wunderlistdesktop.sharingextension
com.wunderkinder.wunderlistdesktop.todayextension
com.readitlater.PocketMac.AddToPocketShareExtension
com.stylemac.instadesk.Photodesk-Feed
it.bloop.airmail.beta10.Airmail-Share-Beta
Apps
/Applications/Uninstall IM Completer.app
Contents of /Library/LaunchAgents/com.cisco.anyconnect.gui.plist (checksum 1087717482)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>KeepAlive</key>
<dict>
<key>PathState</key>
<dict>
<key>/opt/cisco/anyconnect/gui_keepalive</key>
<true/>
</dict>
</dict>
<key>Label</key>
<string>com.cisco.anyconnect.gui</string>
<key>LimitLoadToSessionType</key>
<string>Aqua</string>
<key>ProgramArguments</key>
<array>
<string>open</string>
<string>--wait-apps</string>
<string>/Applications/Cisco/Cisco AnyConnect Secure Mobility Client.app</string>
</array>
</dict>
</plist>
Contents of /Library/LaunchAgents/com.citrix.AuthManager_Mac.plist (checksum 1591517921)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>ServiceIPC</key>
<true/>
<key>MachServices</key>
<dict>
<key>com.citrix.AuthManager_Mac</key>
<true/>
</dict>
<key>Label</key>
<string>com.citrix.AuthManager_Mac</string>
<key>WaitForDebugger</key>
<false/>
<key>ProgramArguments</key>
<array>
<string>/usr/local/libexec/AuthManager_Mac.app/Contents/MacOS/AuthManager_Mac</ string>
</array>
<key>LimitLoadToSessionType</key>
<string>Aqua</string>
<key>Disabled</key>
<false/>
</dict>
</plist>
Contents of /Library/LaunchAgents/com.citrix.ReceiverHelper.plist (checksum 676087606)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.citrix.ReceiverHelper</string>
<key>RunAtLoad</key>
<true/>
<key>KeepAlive</key>
<dict>
<key>SuccessfulExit</key>
<false/>
</dict>
<key>WaitForDebugger</key>
<false/>
<key>ProgramArguments</key>
<array>
<string>/usr/local/libexec/ReceiverHelper.app/Contents/MacOS/ReceiverHelper</st ring>
</array>
<key>LimitLoadToSessionType</key>
<string>Aqua</string>
<key>Disabled</key>
<false/>
</dict>
</plist>
Contents of /Library/LaunchAgents/com.citrix.ServiceRecords.plist (checksum 1445213025)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>ServiceIPC</key>
<true/>
<key>MachServices</key>
<dict>
<key>com.citrix.Beacons</key>
<true/>
<key>com.citrix.ServiceRecords</key>
<true/>
</dict>
<key>Label</key>
<string>com.citrix.ServiceRecords</string>
<key>RunAtLoad</key>
<true/>
<key>KeepAlive</key>
<true/>
<key>WaitForDebugger</key>
<false/>
<key>ProgramArguments</key>
<array>
<string>/usr/local/libexec/ServiceRecords.app/Contents/MacOS/ServiceRecords</st ring>
</array>
...and 8 more line(s)
Contents of /Library/LaunchAgents/com.oracle.java.Java-Updater.plist (checksum 3453356730)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.oracle.java.Java-Updater</string>
<key>ProgramArguments</key>
<array>
<string>/Library/Internet Plug-Ins/JavaAppletPlugin.plugin/Contents/Resources/Java Updater.app/Contents/MacOS/Java Updater</string>
<string>-bgcheck</string>
</array>
<key>StandardErrorPath</key>
<string>/dev/null</string>
<key>StandardOutPath</key>
<string>/dev/null</string>
<key>StartCalendarInterval</key>
<dict>
<key>Hour</key>
<integer>9</integer>
<key>Minute</key>
<integer>57</integer>
<key>Weekday</key>
<integer>3</integer>
</dict>
</dict>
...and 1 more line(s)
Contents of /Library/LaunchDaemons/com.cisco.anyconnect.vpnagentd.plist (checksum 2630047092)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC -//Apple Computer//DTD PLIST 1.0//EN
http://www.apple.com/DTDs/PropertyList-1.0.dtd >
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.cisco.anyconnect.vpnagentd</string>
<key>ProgramArguments</key>
<array>
<string>/opt/cisco/anyconnect/bin/vpnagentd</string>
<string>-execv_instance</string>
</array>
<key>KeepAlive</key>
<true/>
<key>RunAtLoad</key>
<true/>
<key>AbandonProcessGroup</key>
<true/>
<key>EnableTransactions</key>
<false/>
</dict>
</plist>
Contents of /Library/LaunchDaemons/com.wdc.SmartwareDriveService.plist (checksum 2733252498)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.wdc.SmartwareDriveService</string>
<key>Program</key>
<string>/Library/Application Support/WD SmartWare Services/SmartwareDriveService</string>
<key>RunAtLoad</key>
<true/>
<key>StandardErrorPath</key>
<string>/dev/null</string>
</dict>
</plist>
Contents of /Library/LaunchDaemons/com.wdc.WDSmartWareService.plist (checksum 1153517838)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.wdc.WDSmartWareService</string>
<!-- <key>Program</key>
<string>/Library/Application Support/WD SmartWare Services/SmartwareServerApp.app/Contents/MacOS/SmartwareServiceApp</string> -->
<key>ProgramArguments</key>
<array>
<string>/Library/Application Support/WD SmartWare Services/SmartwareServiceApp.app/Contents/MacOS/SmartwareServiceApp</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>StandardErrorPath</key>
<string>/dev/null</string>
</dict>
</plist>
Contents of Library/LaunchAgents/com.genieo.completer.download.plist (checksum 1894818845)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.genieo.completer.download</string>
<key>ProgramArguments</key>
<array>
<string>/Users/USER/Library/Application Support/com.genieoinnovation.Installer/Completer.app/Contents/MacOS/Installer</ string>
<string>-trigger</string>
<string>download</string>
<string>-isDev</string>
<string>0</string>
<string>-installVersion</string>
<string>15886</string>
<string>-firstAppId</string>
<string>19340001</string>
</array>
<key>WatchPaths</key>
<array>
<string>/Users/USER/Downloads</string>
</array>
</dict>
</plist>
Contents of Library/LaunchAgents/com.genieo.completer.update.plist (checksum 2339121592)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.genieo.completer.update</string>
<key>ProgramArguments</key>
<array>
<string>/Users/USER/Library/Application Support/com.genieoinnovation.Installer/Completer.app/Contents/MacOS/Installer</ string>
<string>-trigger</string>
<string>update</string>
<string>-isDev</string>
<string>0</string>
<string>-installVersion</string>
<string>15886</string>
<string>-firstAppId</string>
<string>19340001</string>
</array>
<key>StartInterval</key>
<integer>86400</integer>
</dict>
</plist>
Contents of Library/LaunchAgents/com.microsoft.LaunchAgent.SyncServicesAgent.plist (checksum 3051698494)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>KeepAlive</key>
<false/>
<key>Label</key>
<string>com.microsoft.SyncServicesAgent</string>
<key>OnDemand</key>
<false/>
<key>ProgramArguments</key>
<array>
<string>/Applications/Microsoft Office 2011/Office/SyncServicesAgent.app/Contents/MacOS/SyncServicesAgent</string>
</array>
</dict>
</plist>
Contents of Library/LaunchAgents/com.zimbra.desktop.plist (checksum 3676173668)
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.zimbra.desktop</string>
<key>ProgramArguments</key>
<array>
<string>/Users/USER/Library/Zimbra Desktop/bin/zdesktop</string>
<string>start</string>
<string>-w</string>
</array>
-
Problems with Photos and Fonts and Explorer
I am having problems with photos and fonts when my site is viewed on Explorer. The site is Ostyn-Newman.com The problems can both be seen on the start page -though they happen throughout the site. The photo is supposed to be only 30% opaque and it shows fine on Firefox or Safari, but Explorer viewers get the photo being used as wallpaper at 100% and this steps all over the text. Should I give up a using a photo as wallapaper?
Also the font I am using for "Ostyn-Newman Objects for Fine Homes" shows well in Firefox and Safari, but looks really bad on Explorer products. Should I just change the font? I am currently using Snell Roundhand.See Roddy's posts in these topics:
Re: VIEWING iWEB SITES ON A PC ?
Re: iweb pages memory intensive
Re: iweb site on my personal domain name locks up
The message in each is pretty much the same but he does give some info of an application that can optimize the web pages to make them more readily readable by IE.
OT -
Problem with iWeb 09, after the publication in a local file.
*Subject: problem with iWeb 09, after the publication in a local file, i can't see my blog, nor my photos, but before that all was working fine.*
After the publication in the local file, I see all my pages, but there is a mistake on the page "Blog" where I just can see the top of my page, it's cut and I can't see it entirely, so I can't see the inputs while I should see 3 news or 3 inputs. And it's the same for the "Photos" page where the page is cut, I can't see the photos, and it's just written : "Put the slide show and subscribe".To finish, when I want to activate the comments, it doesn't work neither.
Please help me.I want to activate the comments, it doesn't work neither.
The comments feature is only available when you publish to the MobileMe server, so I don't think you can use it when you publish to a local file.
Maybe you are looking for
-
I installed iTunes update on my pc running windows vista and now it will not open. Error message MSVCR80.dll missing???
-
Re-starting Item Level Shopping Cart Approval Workflow
Hi All - We are implementing WS 14500015 - the Item-based n-level approval workflow for shopping carts - for certain scenarios. In other scenarios we are using the overall approval workflow. I need to re-start the item-level approval workflow for ce
-
Code no longer compiles in SP08
Hi, the following code compiles fine pre SP08 but will no longer compile? CREATE INPUT WINDOW pairsMapping SCHEMA (type1 string, type2 string) PRIMARY KEY (type1, type2) KEEP ALL ROWS; CREATE INPUT WINDOW inputStream SCHEMA (inputType string, inputVa
-
Facebook deleted my video saying some of it might infringe on copyrights . I believe it was because of the added pre-corded music I added to the audio. This movie of a family party was only intended to be shown to family & close friends. How can I
-
Anyone else notice when you record a video on the Thunderbolt you have next to no audio from anything that's more than a foot away? I've called in and stopped at a Verizon store and the only thing they could come up with was "it's a software issue a