PROBLEMS WITH JAMVOX AND MOUNTAIN LION ?

I USE THE JAMVOX GUITAR INTERFACE WITH MY MACBOOK PRO. EVERYTHING WAS WORKING HUNKY DORY AFTER UPGRADING TO MOUNTAIN LION...BUT THEN, AFTER ABOUT THREE WEEKS, IT JUST STOPPED WORKING. EVERY TIME I TRY TO START THE PROGRAM NOW, GET THE SPINNING MAC "WAIT" BALL. IM SEEING ON VOX'S WEBSITE THAT OTHERS ARE ALSO HAVING SIMILAR PROBLEMS. HAS ANYONE FIGURED OUT A WORK AROUND ? MANY THANKS FOR THE HELP.

I am truly disappointed in the new operating system, is there anyway to switch back to OSX Lion and perhaps get my money back?
Why do you think that is the normal performance for Mountain Lion?
First thing to try is boot into Safe Mode by holding down the Shift key on restart.
It will take a little while to boot as it runs some disk checks. Once it is done, it will show the login screen. Log in and try it out. If everything seems normal, you likely have some third-party software that is incompatible with ML.
If it is still messed up, boot into the Recovery HD (cmd-r on restart) and Repair the disk using Disk Utility.
Restart and see if there are still problems.
If so, I would reinstall ML and see if that fixes the issues.

Similar Messages

Potential Problems with Airplay and Mountain Lion

Hey Everyone,
I recently purchased an Apple TV, and I tried to use Airplay with our Macbook Pros. Airplay would work with all of the iOS Devices, but when it came to using with the MBP, it would either show a black screen, or a frozen image of my screen. I called AppleCare, and the rep told me it was a problem with the AppleTV, so I returned it and bought a new one, and it did the same thing. I found out that the problem was occuring because of the type of router I was using. I have a dualband router, and I set everything on one band of the router. I decided to try to place the laptops on a different band, and that's all it took. My airplay now works flawlessly.
So, if you're having a problem with airplay, and you have a dualband router, try placing your computer & iOS devices on the opposite band, and it should work perfectly.
Hope this helps.
- Kaytie Walters

The VPN log looks like:
1      13:34:36.904 09/11/12 Sev=Warning/3
CM/0xA3100027
Adapter address 10.211.55.6 has changed or not detected. Current address(es): 10.98.70.169.
2      13:34:52.044 09/11/12 Sev=Warning/2
CVPND/0xA340000E
Failed to get adapter index.
3      13:35:07.044 09/11/12 Sev=Warning/2
CVPND/0xA340000E
Failed to get adapter index.
4      13:35:07.123 09/11/12 Sev=Warning/2
CVPND/0xA3400015
Error with call to IpHlpApi.DLL: CheckUpVASettings: Found IPADDR entry addr=10.98.70.169, error 0
5      13:35:08.123 09/11/12 Sev=Warning/2
CVPND/0xA3400015
Error with call to IpHlpApi.DLL: CheckUpVASettings: Found IPADDR entry addr=10.98.70.169, error 0
6      13:35:09.123 09/11/12 Sev=Warning/2
CVPND/0xA3400015
Error with call to IpHlpApi.DLL: CheckUpVASettings: Found IPADDR entry addr=10.98.70.169, error 0
7      13:35:10.123 09/11/12 Sev=Warning/2
CVPND/0xA3400015
Error with call to IpHlpApi.DLL: CleanUpVASettings: Was able to delete all VA settings after all, error 0
8      13:35:11.861 09/11/12 Sev=Warning/2
IKE/0xA3000067
Received an IPC message during invalid state (IKE_MAIN:512)
9      13:35:12.407 09/11/12 Sev=Warning/2
IKE/0xA3000067
Received an IPC message during invalid state (IKE_MAIN:512)

Is there a problem with Airport and Mountain Lion?

Since upgrading to Mountain Lion, I am having all kinds of trouble connecting to the web. My connection drops and my network will not relaunch? Is anyone else having this problem?
Thanks
Chuck

It wasn't Mountain Lion, it was my moving my stuff to a place that had a internet address conflict. I redid all of mine, and now is working fine.

Problems with pages and mountain lion

Hey i just updated my iwork, and installed mountain lion, solely for the iwork icloud feature. I do a lot of work on my ipad and it would be very useful if they would sync with my macbook. But unfortunately when i create a new document in pages for the icloud it just says the files name and has a picture of a cloud underneath with "waiting" next to it. Why is this??

Hey i just updated my iwork, and installed mountain lion, solely for the iwork icloud feature. I do a lot of work on my ipad and it would be very useful if they would sync with my macbook. But unfortunately when i create a new document in pages for the icloud it just says the files name and has a picture of a cloud underneath with "waiting" next to it. Why is this??

Connectivity issue with LeapPad and Mountain Lion

Has anyone else had issue with connecting a Leappad game console with Mountain lion? I keep getting an error message asking me to switch off and then on again to solve the problem, but it doesn't solve the problem..... I have tried manually giving the Leapster an ip address but whatever i try just fails.. HELP.???

I have the same issue and have contacted tech support.
This is the response I have from them:
Hi,
Thank you for your email,
Unfortunately there is some issues currently with MAC OSX Mountain Lion and the Leappad Explorer drivers. We have been in contact with apple regarding this solution and have developed a fix for the issue. This will be implemented in Apple's next OSX update which should be soon.
If you have any other questions please let us know,
Regards
Don't Miss Out
To ensure that your LeapFrog emails get to your inbox, please add [email protected] to your email Address Book or Safe List.

Is everybody getting problem with OS X Mountain Lion in this world or few people

Apple should fix immediately this new version or Genuis come ahead. I am checking every big informaton website but no one highlighted these issues.

Hello BinodDhami,
I agree with Grant Bennet-Alder, what you see here "are only a handful" of users who are having problems big or small with Mountain Lion.
I for one have a smooth upgrade for both my iMac and MacBook air, and I think whoever were running Lion should have a smoother upgrade becasue Lion and Mountain Lion are very similar and they probably share a lot of the same codes, as compared to older OS.
It may be too late to say here, but whenever you perform a major OS upgrade, and like all mac websites have recommended, you always
1. Perform all the OS and software updates
2. Back up
You would also find out, especially if yours is a daily working computer, that your major running software is compatible with the new OS.
Like for me, I run Adobe Creative Suite, and have major apps like Norton Internet Security, Maintain Cocktail, SuperDuper, CandyBar, DockStar and Attachment Tamer running, so I make sure they are all compatible with Mountain Lion before I hit install.
As for your problem, maybe you can start a new discussion and detail as much as possible, your mac's problems, what 3rd party apps etc you have that you think might affect it, and screen shots - It's a wonderful thing now that this forum allows us to post screen shots!
Cheers

Selling a 2009 Mac with FCP and Mountain Lion?

I am selling my 2009 iMac and I would like to reset it to the factory settings, BUT I would like to also keep Final Cut Studio and Mountain Lion on it. Is this possible? If not, is there a work-around?

As for the OS (Mountain Lion), no you cannot. Unfortunately, the license is not transferable for any OS purchased at the app store. You will need to erase and reinstall the original OS; if you leave ML on it, the buyer will never be able to reinstall as the purchase/license is tied to your Apple ID forever. You also need to give the buyer the original install disks. I'd tell the buyer that I've discounted the price by $20 so he can buy ML with his own Apple ID since it wouldn't work with my ID.
If you purchased Final Cut on retail disks, then yes, you are allowed to sell or transfer those as long as you do not retain a copy, and you must give the disks to the buyer. It won't do him any good without the disks in case there needs to be a reinstall. If you purchased it at the app store, the same license applies: any app purchased at the app store is not transferable and will not work reliably as Apple's servers would be able to detect its presence on another machine with a different ID.
There is no workaround - this is what is required legally; if you wish to do something else, no one here is going to suggest anything as we would be violating the ToU of these forums.

Problems with the combination Mountain Lion, Parallels 8 and VPN

Hi there,
Have performed an straightforward upgrade of the OS X to Mountain Lion and Parallels I have have a problem keeping the vpn connection for more than an hour.
In order to get a the connection reetablished I need to restart the windows session in Parallels.
Is there any one else facing the same problem?
Best Regards,
Wolves0097

The VPN log looks like:
1      13:34:36.904 09/11/12 Sev=Warning/3
CM/0xA3100027
Adapter address 10.211.55.6 has changed or not detected. Current address(es): 10.98.70.169.
2      13:34:52.044 09/11/12 Sev=Warning/2
CVPND/0xA340000E
Failed to get adapter index.
3      13:35:07.044 09/11/12 Sev=Warning/2
CVPND/0xA340000E
Failed to get adapter index.
4      13:35:07.123 09/11/12 Sev=Warning/2
CVPND/0xA3400015
Error with call to IpHlpApi.DLL: CheckUpVASettings: Found IPADDR entry addr=10.98.70.169, error 0
5      13:35:08.123 09/11/12 Sev=Warning/2
CVPND/0xA3400015
Error with call to IpHlpApi.DLL: CheckUpVASettings: Found IPADDR entry addr=10.98.70.169, error 0
6      13:35:09.123 09/11/12 Sev=Warning/2
CVPND/0xA3400015
Error with call to IpHlpApi.DLL: CheckUpVASettings: Found IPADDR entry addr=10.98.70.169, error 0
7      13:35:10.123 09/11/12 Sev=Warning/2
CVPND/0xA3400015
Error with call to IpHlpApi.DLL: CleanUpVASettings: Was able to delete all VA settings after all, error 0
8      13:35:11.861 09/11/12 Sev=Warning/2
IKE/0xA3000067
Received an IPC message during invalid state (IKE_MAIN:512)
9      13:35:12.407 09/11/12 Sev=Warning/2
IKE/0xA3000067
Received an IPC message during invalid state (IKE_MAIN:512)

Video "Dropouts" with FCS and Mountain Lion

I would like to see if anyone else is having this problem and maybe save some folks from the experience.
I have two macs.
#1- Imac, 2.93, core 2 duo, 4g ram, 24".
#2-Macbook Pro, 17", 2.53, 4g
4t g-raids
Clean Install done on Imac of Mountain Lion. Reloaded fcs.
Did NOT touch macbook. Still running Snow Leopard.
Working on large video job...1080 60i, avchd, panny cam.
Went to transfer footage using all usual settings.
Video on imac looked like "old school" video drop outs. As you can imagine, it was a long night to figure this out.
Erased footage and hooked up my g-raids to the Macbook. Looked fine.
Took hard drives back to imac, tried transfer again. Stuttering and drop outs continued.
Back to Macbook with Snow Leopard, no problems. My guy is editing job right now on Macbook.
I am in the middle of a clean install of Snow Leopard on the imac. I'm gonna have to send the "boys" out to get my $20 bucks back from Apple.
Thought I'd post it in case someone sees same thing and thinks they are crazy.
Mountain lion could not capture footage without drops. Snow Leopard (my trusty os) did it all.
Shocked I say, Apple....Shocked. (Not really, been down this road before) Never believe what they say. Don't upgrade unless forced by gunpoint.

This is the FCP X forum - you should ask this question in the Final Cut Studio forum:
https://discussions.apple.com/community/professional_applications/final_cut_stud io
Andy

Problems with scrolling after mountain lion download.

I just downloaded mountain lion today and ever since the download I am having issues with the scrolling for my magic mouse and trackpad. My problem is when I scroll down on my mouse or trackpad it actually goes up on the page and vice versa. I have seen others have had some scrolling issues but not exactly the same as mine. Just wondering if there is any known fix for this problem? I did the PRAM reset and also the SMC reset and that didn't fix the problem unfortunately.

Look in System Preferences > Trackpad (or mouse) > Scroll & Zoom tab > uncheck Scroll direction: Natural.
The scrolling direction has been changed to a technique where your push the screen up or pull it down, takes a few days to get used to. The swipe directions will also be affected by this change.

Problem with Mail in Mountain Lion -- reply all function

Ever since upgrading to Mountain Lion in Mail when I hit reply all my email address is included in the cc line, so I get sent my responses. Any one else having this problem or know how to fix it? This didn't happen in previous versions.

re: "like on my iMac, when it sleeps, it doesn't fetch email anymore like it did before Mountail Lion"
First, this really should be in a seaparate thread.
What is happening, just like my MBP, is that ML is *actually* sleeping properly. For as long as I used 10.7 on my MBP, it appered to be sleeping, but it really was not (screen black, etc.). And yes, mail would still come through.
Now with ML, it sleeps like it is supposed to sleep, and mail is not received when asleep.
Nothing wrong, no bug, just working properly now.
HTH

Anyone having issues with MacBook Pro2,2 with sleep and Mountain Lion?

Since installing Mountain Lion on my MacBook Pro (2,2, June 2007), I am unable to put my machine to sleep. I close cover and the fan keeps running.
Anybody have any ideas how to fix this?

Scroll through this board to see the varied problems with ML, I don't think Apple even bothered to test Logic with ML, many problems with interface freeze/lag, also some problems with audio stuttering. Don't know how much longer Snow Leopard will be supported but I'm staying there as long as possible. Sorry I don't have better news.

Audio USB crackles on MBP with Retina and Mountain Lion

I have a USB device connected to my MacBook Pro with Retina Display and the audio crackles no matter what I play. I hardly have any processing working and there are no other USB devices. I think that this was working under Lion but I think this is a problem under Mountain Lion. Anyone else have this problem? I am trying to determine whether the problem is in the MBP or the OS... Thanks :-)

Could be it needs to be connected to both USB port by using a Y USB cable to supply enough power to it. And it won't show up unless there is a CD or DVD disc in it.

Scanning software to work with CS6 and Mountain Lion

Since I upgrading my Mac to OS Mountain Lion 10.8 and downloaded Adobe CS 6 I have been unable to get my Epson Scanner to work properly. Since none of the drivers from the Epson and Adobe websites have worked so that I could scan from photoshop, I am looking into using third party software. Adobe mentioned VueScan in their instructions, but it is expensive and I don't like how it is laid out. It appears that SilverFast only works with 32 bit not the 64 required in CS6.
Has anyone else found scanning software that worked for them?
Or does anyone have an idea of getting the Epson software to work on my machine?
The scanner is an Epson Perfection v600 photo scanner, which is still being sold currently as something that works with new computers.

I have a scanner. I am trying to get a driver or new scanner software to work with it. Someone in a different discussion pointed out an article in MacWorld that goes into why this is not working.
http://www.macworld.com/article/1168305/get_your_scanner_to_work_with_photoshop_cs6.html
I would still be interested to know if anyone has had a positive experience with third party scanning sofware. Vue scan? Silverfast?
Also to the Adobe staff :
This is quoted from the MacWorld article.
Right now, if users are running Mountain Lion (OS X 10.8), they will not be able to scan into Photoshop CS6 as described. According to Adobe, this is an across-the-board problem with the Cocoa classes comprising the scanning interface that it is using in Photoshop. It is neither a user nor a scanner manufacturer issue.
Adobe is aware of the problem, has identified it as an Apple OS issue that they are working with Apple to solve, and offer no time frame for when it will be fixed. "
Any idea on the timeframe or if there will be an anouncement when this is resolved?

Problems with mail in mountain lion

I installed mountain lion and since doing so I cannot get past the migrating data window when I try to open mail. I have tried deleting the envelope index (although I can't remove it from the trash as it continually says it is in use). I have also tried moving the smartmailboxes.plist and backup files to my desktop but still no joy. Can anyone suggest what to do next?
Dan

Please follow these directions to delete the Mail "sandbox" folder.
Back up all data.
Quit Mail.
Triple-click the line below to select it:
~/Library/Containers/com.apple.mail
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu. A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder — not just its contents — to the Desktop. Leave the Finder window open for now.
Relaunch Mail and test. If the problem is resolved, you'll have to recreate some of your Mail settings. You can then delete the folder you moved and close the Finder window. If you still have the problem, quit Mail again and put the folder back where it was, overwriting the one that may have been created in its place. Post your results.
Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.

PROBLEMS WITH JAMVOX AND MOUNTAIN LION ?

Similar Messages

Maybe you are looking for