Problems with Java dialog instance after System Copy
Hi Folks,
I've performed a System Copy from PRD to QAS both ABAP and JAVA Stack (Netweaver 2004s SEM-BW). The ABAP is up and running and the central instance JAVA too. But there was two applications (dialog instances JAVA) that desappeared after the HSC. I can't see them in Visual Administrator and can' t start them as well.
Will you give a hand on it? I know this is a pretty weird situation but if somebody experienced this please help me. As far as I know I've double-check the procedure used for this System Copy and everything has been followed.
Best regards,
Hi Prem,
Yes, this sap note is very useful, but there is no reference to Java Dialog Instance, which in this case SAP said that we need to re-install all Dialog instance, in my case I have two Appl Servers which has Java Dialog Instance installed so I have to re-install twice.
Regards,
Washington Neves
Similar Messages
-
Problems with Java 1.5+ after installing new "Software Updates".
I downloaded the regular 'software updates', now my macbook pro won't open Vuze, instead coming up with the message " Cannot launch "Vuze Installer". No compatible version of Java 1.5 available." Then it won't let me "Open Java Preferences". What do I do???
This is silly. Just because you don't know Vuze doesn't mean there's no problem with this update. My friends are having the same issue, of course we are looking at possible problem from Vuze's part but we cannot really say this update has 100% nothing to do with Vuze's launch failure, can we?
P.S. Since Vuze is not banned by law, it's still legal to use it. It's up to people if they want to use it for good or bad.
dogquake -
Problem with live streaming video after system updates
Dear all,
I hope you can assist me on this.
Yesterday, I downloaded the following automatic updates: iLife Support 9.0.4, Remote Desktop Client update 3.4, Mac OS X Update Combined 10.6.7, Airport Utility 5.5.2.
After that, I could NO MORE watch live streaming channels. To be precise, l can properly hear the sound, but not see the video.
I wish to underline the fact that before installing the automatic updates listed above, I had a clear sound and video of all live streaming sites.
I downloaded the latest versions of JAVA and Flash, but unfortunately they didn't solve the problem.
Therefore, I am quite sure the live streaming disfunction has to do with the system automatic updates. Is there any way to uninstall yesterday's updates without compromising the various softwares and OS performance?
What else could be if not related to the system updates?
Looking forward to hearing from you. Thanks in advance.Stan,
I hadn't heard of gspot before. I downloaded it and it looks like a nice, handy tool. Thanks.
After running it, I didn't see anything that caught my eye as unusual (corrupt file, unknown codec, etc.) I have posted a screenshot at the following URL if you care to look.
www.cbvideo.com/gspot/gspot-out.jpg
Now, let me add to the mystery. I was just able to burn it without incident with Encore 1.5 and the same chapter mark locations. There are only two things I can think of that would be possible causes. 1) something quirky about CS3, even though I've not had any prior problems in two years with it for my business OR 2) the file had become corrupted when moving from the capture computer (the older computer with 1.5) to the newer computer (with CS3). As the file seems to be okay on the 2nd computer (plays fine in WMP and imports into both Premiere and Encore), I'm leaning toward #1.
I have been able to successfully work around the problem to finish this job for the client, but I'd still like to know what's going on for future reference. If anyone has other ideas, please let me know.
Robert -
Problem with Java Native Type after Migration from 7.0 to 7.1
Hi,
after Migration from Netweaver 7.0 to Netweaver 7.1 I get following error:
FileDownload 'FileDownload.data': Context attribute 'PrintSelectedView.PdfToDownload.resourceInputStream' has the Java native type 'com.sap.tc.webdynpro.progmodel.api.IWDInputStream' and cannot be bound to this property. Hint: Remove the binding or bind a context element matching the property's type.
What have I done wrong?
How could I fix this problem?
Best regards,
PeterHi,
thanks, this solved the problem.
Thank you.
Best regards,
Peter -
J2ee engine does not start up after system copy
Dear All,
I have done a system copy of BW3.5 (NW04). I installed the BW.3.5 and then replaced the data and control files.
This has ABAP + java.
Now after system copy when i am starting the server, the J2ee instance doesnt start up.
ABAP is running and DB is up too.
I am getting the following error in log_bootstrap file:-
Exception occured:
com.sap.engine.bootstrap.SynchronizationException: Database initialization failed! Check database properties!
at com.sap.engine.bootstrap.Bootstrap.initDatabaseConnection(Bootstrap.java:422)
at com.sap.engine.bootstrap.Bootstrap.<init>(Bootstrap.java:144)
at com.sap.engine.bootstrap.Bootstrap.main(Bootstrap.java:813)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:85)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:58)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:60)
at java.lang.reflect.Method.invoke(Method.java:391)
at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
==[ Caused by: ]==----
com.sap.engine.bootstrap.SynchronizationException: No such Dialog Instance (ID1125100) in the database! Check
database consistency or local Bootstrap properties!
at com.sap.engine.bootstrap.Synchronizer.getElementType(Synchronizer.java:81)
at com.sap.engine.bootstrap.Bootstrap.initDatabaseConnection(Bootstrap.java:420)
at com.sap.engine.bootstrap.Bootstrap.<init>(Bootstrap.java:144)
at com.sap.engine.bootstrap.Bootstrap.main(Bootstrap.java:813)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:85)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:58)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:60)
at java.lang.reflect.Method.invoke(Method.java:391)
at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
[Aug 26, 2008 2:00:26 PM ] [Bootstrap module]> Problem occured while performing synchronization.
[Aug 26, 2008 2:00:42 PM ] -
[Aug 26, 2008 2:00:42 PM ] Bootstrap MODE:
[Aug 26, 2008 2:00:42 PM ] <INSTANCE GLOBALS>
[Aug 26, 2008 2:00:42 PM ] determined by parameter [ID0011251].
[Aug 26, 2008 2:00:42 PM ] -
[Aug 26, 2008 2:00:46 PM ] Exception occured:
com.sap.engine.frame.core.configuration.NameNotFoundException: A configuration with the path "cluster_data/di
spatcher/ID1125100" does not exist.
at com.sap.engine.core.configuration.impl.ConfigurationDataCacheAllImpl.getSubConfiguration(Configura
tionDataCacheAllImpl.java:107)
at com.sap.engine.core.configuration.impl.ReadAccessConfiguration.getSubConfiguration(ReadAccessConfi
guration.java:715)
at com.sap.engine.bootstrap.Synchronizer.getConfiguration(Synchronizer.java:365)
at com.sap.engine.bootstrap.Synchronizer.getElementType(Synchronizer.java:78)
at com.sap.engine.bootstrap.Bootstrap.initDatabaseConnection(Bootstrap.java:420)
at com.sap.engine.bootstrap.Bootstrap.<init>(Bootstrap.java:144)
at com.sap.engine.bootstrap.Bootstrap.main(Bootstrap.java:813)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:85)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:58)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:60)
at java.lang.reflect.Method.invoke(Method.java:391)
at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
What could the problem?. Do I need to do some other settings for system copy of JVA instance?
Kindly help
Thanks
TajinderHi,
I already checked that note. It did not help.
I am pasting mine dev_jcontrol file:--
trc file: "/usr/sap/BD1/DVEBMGS00/work/dev_jcontrol", trc level: 1, release: "640"
node name : jcontrol
pid : 868524
system name : BD1
system nr. : 00
started at : Tue Aug 26 16:27:10 2008
arguments :
arg[00] : jcontrol
arg[01] : pf=/usr/sap/BD1/SYS/profile/BD1_DVEBMGS00_BWQAS
arg[02] : -DSAPSTART=1
arg[03] : -DCONNECT_PORT=64380
arg[04] : -DLISTEN_PORT=64381
arg[05] : -DSAPSYSTEM=00
arg[06] : -DSAPSYSTEMNAME=BD1
arg[07] : -DSAPMYNAME=BWQAS_BD1_00
arg[08] : -DSAPPROFILE=/usr/sap/BD1/SYS/profile/BD1_DVEBMGS00_BWQAS
arg[09] : -DFRFC_FALLBACK=ON
arg[10] : -DFRFC_FALLBACK_HOST=localhost
JStartupReadInstanceProperties: read instance properties [/usr/sap/BD1/DVEBMGS00/j2ee/cluster/instance.proper
ties:/usr/sap/BD1/DVEBMGS00/SDM/program/config/sdm_jstartup.properties]
-> ms host : BWQAS
-> ms port : 3601
-> OS libs : /usr/sap/BD1/DVEBMGS00/j2ee/os_libs
-> Admin URL :
-> run mode : NORMAL
-> run action : NONE
-> enabled : yes
Used property files
-> files [00] : /usr/sap/BD1/DVEBMGS00/j2ee/cluster/instance.properties
-> files [01] : /usr/sap/BD1/DVEBMGS00/SDM/program/config/sdm_jstartup.properties
Instance properties
-> ms host : BWQAS
-> ms port : 3601
-> os libs : /usr/sap/BD1/DVEBMGS00/j2ee/os_libs
-> admin URL :
-> run mode : NORMAL
-> run action : NONE
-> enabled : yes
Bootstrap nodes
-> [00] bootstrap : /usr/sap/BD1/DVEBMGS00/j2ee/cluster/instance.properties
-> [01] bootstrap_ID1125100 : /usr/sap/BD1/DVEBMGS00/j2ee/cluster/instance.properties
-> [02] bootstrap_ID1125150 : /usr/sap/BD1/DVEBMGS00/j2ee/cluster/instance.properties
Worker nodes
-> [00] ID1125100 : /usr/sap/BD1/DVEBMGS00/j2ee/cluster/instance.properties
-> [01] ID1125150 : /usr/sap/BD1/DVEBMGS00/j2ee/cluster/instance.properties
-> [02] sdm : /usr/sap/BD1/DVEBMGS00/SDM/program/config/sdm_jstartup.properties
[Thr 01] Tue Aug 26 16:27:10 2008
[Thr 01] SigISetDefaultAction : default handling for signal 20
[Thr 01] JControlExecuteBootstrap: execute bootstrap process [bootstrap]
[Thr 258] JControlDPMessageFunc: Thread 258 started as handler thread for R/3 dispatcher messages.
[Thr 01] *** WARNING => Maximum Java heap size specified twice (through maxHeapSize and in javaParameters) -
using -Xmx512m [jstartxx_mt. 2282]
[Thr 01] [Node: bootstrap] java home is set by profile parameter
Java Home: /usr/java14_64
JStartupIReadSection: read node properties [bootstrap]
-> node name : bootstrap
-> node type : bootstrap
-> java path : /usr/java14_64
-> java parameters : -Djco.jarm=1 -Djco.jarm=1
-> java vm version : J2RE 1.4.2 IBM AIX 5L for PowerPC (64 bit JVM) build caix64142-20060421 (SR5) (JIT enabl
ed: jitc)
-> java vm vendor : Classic VM (IBM Corporation)
-> java vm type : <default>
-> java vm cpu : ppc64
-> heap size : 512M
-> root path : /usr/sap/BD1/DVEBMGS00/j2ee/cluster
-> class path : ./bootstrap/launcher.jar
-> OS libs path : /usr/sap/BD1/DVEBMGS00/j2ee/os_libs
-> main class : com.sap.engine.offline.OfflineToolStart
-> framework class : com.sap.bc.proj.jstartup.JStartupFramework
-> registr. class : com.sap.bc.proj.jstartup.JStartupNatives
-> framework path : /usr/sap/BD1/DVEBMGS00/j2ee/os_libs/jstartup.jar
-> parameters : com.sap.engine.bootstrap.Bootstrap ./bootstrap ID0011251
-> debuggable : yes
-> debug mode : no
-> debug port : 60000
-> shutdown timeout: 120000
JStartupStartJLaunch: program = /usr/sap/BD1/DVEBMGS00/j2ee/os_libs/jlaunch
-> arg[00] = /usr/sap/BD1/DVEBMGS00/j2ee/os_libs/jlaunch
-> arg[01] = pf=/usr/sap/BD1/SYS/profile/BD1_DVEBMGS00_BWQAS
-> arg[02] = -DSAPINFO=BD1_00_bootstrap
-> arg[03] = -file=/usr/sap/BD1/DVEBMGS00/j2ee/cluster/instance.properties
-> arg[04] = -nodeName=bootstrap
-> arg[05] = -nodeId=-1
-> arg[06] = -syncSem=12582961
-> arg[07] = -jvmOutFile=/usr/sap/BD1/DVEBMGS00/work/jvm_bootstrap.out
-> arg[08] = -stdOutFile=/usr/sap/BD1/DVEBMGS00/work/std_bootstrap.out
-> arg[09] = -locOutFile=/usr/sap/BD1/DVEBMGS00/work/dev_bootstrap
-> arg[08] = -stdOutFile=/usr/sap/BD1/DVEBMGS00/work/std_bootstrap.out
-> arg[09] = -locOutFile=/usr/sap/BD1/DVEBMGS00/work/dev_bootstrap
-> arg[10] = -mode=BOOTSTRAP
-> arg[11] = pf=/usr/sap/BD1/SYS/profile/BD1_DVEBMGS00_BWQAS
-> arg[12] = -DSAPSTART=1
-> arg[13] = -DCONNECT_PORT=64382
-> arg[14] = -DLISTEN_PORT=64381
-> arg[15] = -DSAPSYSTEM=00
-> arg[16] = -DSAPSYSTEMNAME=BD1
-> arg[17] = -DSAPMYNAME=BWQAS_BD1_00
-> arg[18] = -DSAPPROFILE=/usr/sap/BD1/SYS/profile/BD1_DVEBMGS00_BWQAS
-> arg[19] = -DFRFC_FALLBACK=ON
-> arg[20] = -DFRFC_FALLBACK_HOST=localhost
-> lib path = LIBPATH=/usr/java14_64/jre/bin:/usr/java14_64/jre/bin/classic:/usr/java14_64/jre/bin:/usr/sap/B
D1/DVEBMGS00/j2ee/os_libs:/usr/sap/BD1/SYS/exe/run:/usr/sap/BD1/SYS/exe/runU:/usr/lib:/usr/sap/BD1/DVEBMGS00/
j2ee/os_libs:/usr/sap/BD1/DVEBMGS00/j2ee/os_libs:/usr/lib:/lib:/usr/sap/BD1/SYS/exe/run:/usr/sap/BD1/SYS/exe/
runU
-> exe path = PATH=/usr/java14_64/bin:/usr/sap/BD1/DVEBMGS00/j2ee/os_libs:/oracle/BD1/920_64/bin:/usr/java14_
64/bin:/home/bd1adm:/usr/sap/BD1/SYS/exe/runU:/usr/sap/BD1/SYS/exe/run:/usr/bin:/etc:/usr/sbin:/usr/ucb:/home
/bd1adm/bin:/usr/bin/X11:/sbin:.
[Thr 01] JStartupICreateProcess: fork process (pid 893002)
[Thr 01] Tue Aug 26 16:27:18 2008
[Thr 01] *** ERROR => invalid return code of process [bootstrap] (exitcode=66) [jstartxx_mt. 1433]
[Thr 01] JControlExecuteBootstrap: error executing bootstrap node [bootstrap] (rc=66)
[Thr 01] JControlCloseProgram: started (exitcode = 66)
[Thr 01] JControlCloseProgram: good bye... (exitcode=66)
DO i have to change the some settingdsin any file for java instance after system copy.
Thanks
Tajinder -
Problem with Java after System Upgrade to 10.5.7
Hi,
I am facing problem with Java after having run Software upgrades.
Here is the whole story. I recently moved to iMac 10.5.6 from PowerPc 10.4. On this new machine I was having problem running a 3rd party application, which requires JVM. As this application worked well on Tiger, I decided to upgrade JVM on my iMAC using Software Upgrade(was I insane!!). As I like my systems to be updated (as with linux on my personal machine) I clicked "install all". As a result I have the following upgrades run on my machine:
2009-05-20 13:12:01 +0200: Installed "Mac OS X Update Combined" (10.5.7)
2009-05-20 13:12:10 +0200: Installed "Remote Desktop Client Update" (3.2.2)
2009-05-20 13:12:26 +0200: Installed "Java For Mac OS X 10.5 Update 2" (1.0)
2009-05-20 13:58:36 +0200: Installed "Java for Mac OS X 10.5 Update 3" (1.0)
2009-05-20 13:58:44 +0200: Installed "AirPort Utility Software Update 2009-001" (5.4.1)
2009-05-20 13:59:07 +0200: Installed "QuickTime" (7.6)
2009-05-20 13:59:22 +0200: Installed "iPhoto Update" (7.1.5)
2009-05-20 13:59:28 +0200: Installed "iLife Support" (9.0.2)
2009-05-20 13:59:38 +0200: Installed "iDVD Update" (7.0.3)
2009-05-20 13:59:58 +0200: Installed "iTunes" (8.1.1)
But now, simply running $ java on the prompt hangs, i.e. it takes no action.
$ which java
/usr/bin/java
$ ls -ltr /usr/bin/java
May 20 15:09 /usr/bin/java -> /System/Library/Frameworks/JavaVM.framework/Versions/Current/Commands/java
$java (no response)
Here is the output of $ top
PID COMMAND %CPU TIME #TH #PRTS #MREGS RPRVT RSHRD RSIZE VSIZE
703 java 98.8% 0:38.54 3 110 72 480K 184K 1964K 40M
Any clues?
cheersHi man,
In the wake of this java problem I resorted to keep working on my old machine, and today in my spare time I tried to fix this new machine.
So I execute $java on prompt, and then try to check the files it has opened, using lsof -p pid
I see it referring to
/System/Library/Frameworks/JavaVM.framework/Versions/1.5.0/Home/bin/java
isn't this usually the JAVA_HOME
However, executing $/System/Library/Frameworks/JavaVM.framework/Versions/1.5.0/Home/bin/java
hangs!!
but
$/System/Library/Frameworks/JavaVM.framework/Versions/1.6.0/Home/bin/java
works!!
$ pwd
/System/Library/Frameworks/JavaVM.framework/Versions/1.6/Home/bin
$ ./java -version
java version "1.6.0_07"
Java(TM) SE Runtime Environment (build 1.6.0_07-b06-153)
Java HotSpot(TM) 64-Bit Server VM (build 1.6.0_07-b06-57, mixed mode)
So, I changed the links as follows
borgraf:Versions raveesh$ l
total 72
drwxr-xr-x 3 root wheel 102 Mar 6 2008 1.3.1
lrwxr-xr-x 1 root wheel 3 May 21 19:42 1.4.1 -> 1.4
drwxr-xr-x 8 root wheel 272 May 21 19:42 1.6.0
lrwxr-xr-x 1 root wheel 3 May 21 19:44 OldCurrentJDK -> 1.5
lrwxr-xr-x 1 root wheel 5 May 21 19:44 1.4 -> 1.4.2
lrwxr-xr-x 1 root wheel 5 May 21 19:44 1.3 -> 1.3.1
lrwxr-xr-x 1 root wheel 5 May 21 19:44 1.5 -> 1.5.0
drwxr-xr-x 8 root wheel 272 May 21 19:44 1.4.2
drwxr-xr-x 8 root wheel 272 May 21 19:44 1.5.0
lrwxr-xr-x 1 root wheel 5 May 21 19:44 1.6 -> 1.6.0
lrwxr-xr-x 1 root wheel 1 May 21 19:44 OldCurrent -> A
drwxr-xr-x 8 root wheel 272 May 21 19:44 A
lrwxr-xr-x 1 root wheel 3 Jun 4 17:14 CurrentJDK -> 1.6
lrwxr-xr-x 1 root wheel 3 Jun 4 17:21 Current -> 1.6
Linking my Current and CurrentJDK to 1.6 and it works!
However, shall that be the reason!
what is in your /Versions/Current/
I got the following
$ ls /System/Library/Frameworks/JavaVM.framework/Versions/Current
CodeResources Frameworks JavaVM
Commands Headers Resources
There is no /Home in here, which is usually the case for /1.5 or /1.6
Anyways, things seems to work for the moment. Lets see if I get problem with using Java.
thanks -
Problem with extractors after system copy
Hi Gurus!
After system copy I have problem with export data source from infocubes. Logical system name was converted with BDLS. When I check any export datasource (8*) with transaction RSA3 system tell me that no data records was found though data in fact table every infocube exist (in SE11). What can I do to solve this problem?
Thanx.Hi,
Of course I tried reactivate myself source system but problem is still here. When I check extractor (with RSA3) of any data source of any infoobject (master data) - everything is OK. When I check extractor for export data sorce - I have problem.
to Mickael: In modeling every thing is OK.
Thank you for all answers..... -
Problem with Java after Software Update to 10.5.7
Hi,
I am facing problem with Java after having run Software upgrades.
Here is the whole story. I recently moved to iMac 10.5.6 from PowerPc 10.4. On this new machine I was having problem running a 3rd party application, which requires JVM. As this application worked well on Tiger, I decided to upgrade JVM on my iMAC using Software Upgrade(was I insane!!). As I like my systems to be updated (as with linux on my personal machine) I clicked "install all". As a result I have the following upgrades run on my machine:
2009-05-20 13:12:01 +0200: Installed "Mac OS X Update Combined" (10.5.7)
2009-05-20 13:12:10 +0200: Installed "Remote Desktop Client Update" (3.2.2)
2009-05-20 13:12:26 +0200: Installed "Java For Mac OS X 10.5 Update 2" (1.0)
2009-05-20 13:58:36 +0200: Installed "Java for Mac OS X 10.5 Update 3" (1.0)
2009-05-20 13:58:44 +0200: Installed "AirPort Utility Software Update 2009-001" (5.4.1)
2009-05-20 13:59:07 +0200: Installed "QuickTime" (7.6)
2009-05-20 13:59:22 +0200: Installed "iPhoto Update" (7.1.5)
2009-05-20 13:59:28 +0200: Installed "iLife Support" (9.0.2)
2009-05-20 13:59:38 +0200: Installed "iDVD Update" (7.0.3)
2009-05-20 13:59:58 +0200: Installed "iTunes" (8.1.1)
But now, simply running $java on the prompt hangs, i.e. it takes no action.
$ which java
/usr/bin/java
$ ls -ltr /usr/bin/java
May 20 15:09 /usr/bin/java -> /System/Library/Frameworks/JavaVM.framework/Versions/Current/Commands/java
$java (no response)
Here is the output of $ top
PID COMMAND %CPU TIME #TH #PRTS #MREGS RPRVT RSHRD RSIZE VSIZE
703 java 98.8% 0:38.54 3 110 72 480K 184K 1964K 40M
Any clues?
Details of JavaVM on my machine
$ pwd
/System/Library/Frameworks/JavaVM.framework/Versions
$ ls -ltr
total 56
drwxr-xr-x 3 root wheel 102 Dec 2 2007 1.3.1
lrwxr-xr-x 1 root wheel 3 Aug 31 2008 1.4.1 -> 1.4
drwxr-xr-x 8 root wheel 272 Aug 31 2008 1.4.2
drwxr-xr-x 8 root wheel 272 Aug 31 2008 1.5.0
lrwxr-xr-x 1 root wheel 5 May 20 13:12 1.3 -> 1.3.1
lrwxr-xr-x 1 root wheel 5 May 20 13:12 1.4 -> 1.4.2
lrwxr-xr-x 1 root wheel 5 May 20 13:12 1.5 -> 1.5.0
drwxr-xr-x 8 root wheel 272 May 20 13:12 1.6.0
lrwxr-xr-x 1 root wheel 5 May 20 13:12 1.6 -> 1.6.0
drwxr-xr-x 8 root wheel 272 May 20 13:12 A
lrwxr-xr-x 1 root wheel 1 May 20 14:57 Current -> A
lrwxr-xr-x 1 root wheel 3 May 20 14:59 CurrentJDK -> 1.5
Any suggestions? Is there a cleaner approach to uninstall Java on Mac then a simpl "move to thrash"!
cheersHi,
I am facing problem with Java after having run Software upgrades.
Here is the whole story. I recently moved to iMac 10.5.6 from PowerPc 10.4. On this new machine I was having problem running a 3rd party application, which requires JVM. As this application worked well on Tiger, I decided to upgrade JVM on my iMAC using Software Upgrade(was I insane!!). As I like my systems to be updated (as with linux on my personal machine) I clicked "install all". As a result I have the following upgrades run on my machine:
2009-05-20 13:12:01 +0200: Installed "Mac OS X Update Combined" (10.5.7)
2009-05-20 13:12:10 +0200: Installed "Remote Desktop Client Update" (3.2.2)
2009-05-20 13:12:26 +0200: Installed "Java For Mac OS X 10.5 Update 2" (1.0)
2009-05-20 13:58:36 +0200: Installed "Java for Mac OS X 10.5 Update 3" (1.0)
2009-05-20 13:58:44 +0200: Installed "AirPort Utility Software Update 2009-001" (5.4.1)
2009-05-20 13:59:07 +0200: Installed "QuickTime" (7.6)
2009-05-20 13:59:22 +0200: Installed "iPhoto Update" (7.1.5)
2009-05-20 13:59:28 +0200: Installed "iLife Support" (9.0.2)
2009-05-20 13:59:38 +0200: Installed "iDVD Update" (7.0.3)
2009-05-20 13:59:58 +0200: Installed "iTunes" (8.1.1)
But now, simply running $java on the prompt hangs, i.e. it takes no action.
$ which java
/usr/bin/java
$ ls -ltr /usr/bin/java
May 20 15:09 /usr/bin/java -> /System/Library/Frameworks/JavaVM.framework/Versions/Current/Commands/java
$java (no response)
Here is the output of $ top
PID COMMAND %CPU TIME #TH #PRTS #MREGS RPRVT RSHRD RSIZE VSIZE
703 java 98.8% 0:38.54 3 110 72 480K 184K 1964K 40M
Any clues?
Details of JavaVM on my machine
$ pwd
/System/Library/Frameworks/JavaVM.framework/Versions
$ ls -ltr
total 56
drwxr-xr-x 3 root wheel 102 Dec 2 2007 1.3.1
lrwxr-xr-x 1 root wheel 3 Aug 31 2008 1.4.1 -> 1.4
drwxr-xr-x 8 root wheel 272 Aug 31 2008 1.4.2
drwxr-xr-x 8 root wheel 272 Aug 31 2008 1.5.0
lrwxr-xr-x 1 root wheel 5 May 20 13:12 1.3 -> 1.3.1
lrwxr-xr-x 1 root wheel 5 May 20 13:12 1.4 -> 1.4.2
lrwxr-xr-x 1 root wheel 5 May 20 13:12 1.5 -> 1.5.0
drwxr-xr-x 8 root wheel 272 May 20 13:12 1.6.0
lrwxr-xr-x 1 root wheel 5 May 20 13:12 1.6 -> 1.6.0
drwxr-xr-x 8 root wheel 272 May 20 13:12 A
lrwxr-xr-x 1 root wheel 1 May 20 14:57 Current -> A
lrwxr-xr-x 1 root wheel 3 May 20 14:59 CurrentJDK -> 1.5
Any suggestions? Is there a cleaner approach to uninstall Java on Mac then a simpl "move to thrash"!
cheers -
User password problem in RFC after system copy
HEllo,
we have a problem in ECC6.0 after system copy (refresh QUAL system by PRD data).
BEfore doing this copy, we export RFC data (SM59 tables) of our QUAL system and after the refresh we reimport these RFC in our QUAL system. We don't want RFC comming from productive system.
After this reimport, RFC configuration is ok but we have a problem with RFCuser password. In the password box we have "inconsistent"...
Have you an idea to reimport succesfully these informations ?
Thanks
lionelHello,
We performed another refresh yesterday. But unfortunatly it was not working. Password are still inconsistent.
This are exactly way we perform it:
Before restoring DB :
export table via R3trans for tables:
RFCDES, RFCDOC, RFCATTRIB, RFCCHECK, RFCDESSECU, RFCSYSACL, RFCTRUST, RFCCMC, RFCGO, SXRFC, IBSSI_RFCDEST, PARAMVALUE, RSECACTB where ident LIKE '___/RFC%'
export users via scc8
Restore DB, truncate upper rfc tables, import rfc Tables
Check SM59 => inconsistent
Migrate Secstore => still inconsistent
Import Users via transport generated by scc8
run scc7 as post actions
Tuncatate/re-import rfc tables
Check SM59 => inconsistent
Migrate Secstore => still inconsistent
What else could be done ?
We have a lot of RFC. so re-enter all password is really a hudge task ..
Thanks a lot for help -
I have a problem with Java and an e-procurement system integrating
I use an e-procurement system at work and yesterday I could not get my parts list from the suppliers web site to display in our in-house eprocurment finance package.
There is not a problem with the finance package. There is not a problem with the suppliers web site. I have verified both of these by other colleagues being able to complete what I am trying to do.
The difference between my version of Firefox and my colleagues' is that I am on version 6.0.1 and they are on 6.0.
I have had problems with Java not displaying certain animations on the suppliers web site but, my colleague does not and I am suspicious that this is the problem. Can anyone verify this please and what can I do about it. My Java updates are up-to-date as of yesterday and are automatic.
Thanks.I was quite amazed I never got a reply to this, in the past people here have been helpful. In any case I was finally able to enter this website on the exceptions list in the Java panel, and I believe it is okay now.
-
hallo, i have a problem with the intallation about after effects. I have a mac 10.6.8 and they told me I can't installete it because i don't have a system with 64 bit. how can i do? someone told me i can .. but i don't know how. thank you
You cannot. If someone else told you there is a way then they will need to show you. After Effects requires a 64-bit system and the latest release requires Mac OS X v10.8 or v10.9 minimum
-
Problems with HP Probook 6475b after swiching computer off during full system restore
Can anyone help?I have a problem with my HP Probook after it was accidently switched off during the running of an inbuilt recovery disc to restore the computer to its original instalation. When I switch it on now it goes straight to a message that says 'Windows is loading files' and after a short while comes up with a screen which says: Windows 7RECOVERY DISC***WARNING***You are about to erase your hard drive. click the greencheck box to proceed. Performing this action will restorethe computer back to it's original Windows installaltion there is the choice of three check boxes - one green with a tick, one red with a cross and one c:\ When I click the green box after about 5 seconds there is a dialogue box entitled ' Restore Error Message'and in the box it states Error 1, with a box to click that says 'ok' If I click the ok box it returns back to the same message that Windows is loading files and goes through the same loop.I cannot get past this point. If I click the c:\ box it goes to a black dialogue box which has the following: Microsoft Windows [Version 6.1.7600]X=\windows\system32> If I put sfc/scannow the message is as follows: There is a system repair pending which requires reboot to complete. Restart Windows and run sfc again Can anyone advise how I can get out of this 'Error 1' loop and complete the system restore?
I do have a backup of the files, but the biggest issues come with the computer shutting down. I try to save frequently, but it makes it very tedious when I have to wait for the computer to reload, relaunch photoshop and redo my work. These frequent interruptions are hurting my productivity.
-
Installing Java Dialog Instance - Error while connecting to DB
We would like to add a dialog instance to our production Portal server. We installed Portal as stand-alone on the central instance. We have another server we would like to setup to serve as a Portal dialog instance.
So far I have installed Windows 2003 Server Standard. Installed MSSQL server client tools (database is mssql server). Installed jdk 1.4.62. Set java home and path environmental variables. I'm now installing the Java dialog instance (I can't find any documentation on this). From Netweaver installation CD> SAP NetWeaver '04 Support Release 1> Java System> MS SQL Server> Dialog Instance Installation>
SAP System ID: (sid) ES2
Central Host: SAPEPS02
Path to JAVA DVD supplied> JDK Directory confirmed> Domain paramaters confirmed> domain<sid> account passwords supplied> domain<service><sid> account password supplied> Instance number confirmed>
Installation started> It gets to step 8 and fails stating "Error while connecting to DB". I looked through all the log files and couldn't come up with anything (i'm very thorough).
I tried adding the users to the database as dbowners (no luck). I installed SQL server 2000 with SP4. No where during this installation did I get prompted for database parameters?
Is there something basic i'm missing? Does this scenario not work? Any help would be greatly appreciated. Pointing me in the right direction of the correct documentation would also be appreciated. Thank you in advance.
Sincerely,
Brad DridiHi Brad,
I am facing the same problem. I hope by now you must have got the solution for this.
Can you please let me know how did you overcome this situation?
Thank you!!
Regards,
Abhijeet Bhagat -
Problem with Java and Windows (Mainly Vista and UAC)
Hi all,
I am having a problem with a program that I've devoloped. The program itself is packaged as a jar and I plan to deploy it across multiple platforms eventually however right now i am only concerned about windows based systems. I have made an installer for a windows baised systems using NSIS to install the software files. I made the installer as I need several java packages to be installed so the program would work (JAI, J3D, JAI ImageIO) and I also require the program to have fileassociations on windows.
I know that this is not what java is about, however the majority of the users will be on windows baised systems so I've decided that OS specific installers is the best option.
During the process I have noticed that there are several key problem with java for this type of application!
The first issue that I have come across is getting file associations to work on java. As a .jar is not an excutable it is not possible to directly associate a filetype with it in java so to overcome this I currently run the program from a .bat files and also the program requires large memory so this also allows me to run the program with -xmx. The batch file that I use is :
<code>
cd PATH TO PROGRAM
start javaw -Dsun.java2d.noddraw=true -Xmn100M -Xms500M -Xmx1000M -jar "PATH TO PROGRAM\program.jar" %1 -vram 134217728
pause;
</code>
Ok so all this appears to work fine and allows windows to have file associations and start the program and thats all works perfectly but this is a non-ideal solution. Has anyone got any advice on improving this?
The next problem that I have appears to be a problem with Vista and UAC (user access control). When a user installs the program and installs the program into the program files directory I found that the program did not work and kept saying that I did not have access to the files in the current directory. This is a problem as I read and write settings files during program execution.
On a Vista system UAC prevents file write operations into the Program Files directory unless the program has requested elevated status even if the user is a full administrator. The probem is that there appears to be no real way to achieve this under java that I'm aware of...
Has anyone else had this probem and has a suitable solution?
Any advice on these issues would realy be appricated.
Regards
JoeyOk so i've kinda found a solution, its not ideal but its very good. I found this program called Elevate
A link to the site I got it was
http://www.wintellect.com/cs/blogs/jrobbins/archive/2007/03/27/elevate-a-process-at-the-command-line-in-vista.aspx
This program allows you start java with a UAC dialog for high access using
Elevate java -jar myjar.jar
This then allows you to have full access using java... I guess it could be dangerous but it does the job. -
Problem with Java Stack- dev_w2 log mentioned.
Hi everyone, I have a problem with Java Stack, I could not connect to XI home page,
I am unable to login to j2ee engine using visual Administrator.
Please go through the log below. And help me out to resolve this issue and let me know what could be the problem.
trc file: "dev_w2", trc level: 1, release: "640"
ACTIVE TRACE LEVEL 1
ACTIVE TRACE COMPONENTS all, M
B
B create_con (con_name=R/3)
B Loading DB library 'C:\usr\sap\SXI\SYS\exe\run\dboraslib.dll' ...
B Library 'C:\usr\sap\SXI\SYS\exe\run\dboraslib.dll' loaded
B Version of 'C:\usr\sap\SXI\SYS\exe\run\dboraslib.dll' is "640.00", patchlevel (0.39)
B New connection 0 created
M systemid 560 (PC with Windows NT)
M relno 6400
M patchlevel 0
M patchno 43
M intno 20020600
M make: multithreaded, Unicode
M pid 4140
M
M ***LOG Q0Q=> tskh_init, WPStart (Workproc 2 4140) [dpxxdisp.c 1160]
I MtxInit: -2 0 0
M DpSysAdmExtCreate: ABAP is active
M DpSysAdmExtCreate: JAVA is not active
M DpShMCreate: sizeof(wp_adm) 13160 (1316)
M DpShMCreate: sizeof(tm_adm) 2780232 (13832)
M DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
M DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
M DpShMCreate: sizeof(comm_adm) 290000 (580)
M DpShMCreate: sizeof(vmc_adm) 0 (372)
M DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
M DpShMCreate: SHM_DP_ADM_KEY (addr: 060A0040, size: 3195320)
M DpShMCreate: allocated sys_adm at 060A0040
M DpShMCreate: allocated wp_adm at 060A1B58
M DpShMCreate: allocated tm_adm_list at 060A4EC0
M DpShMCreate: allocated tm_adm at 060A4EE8
M DpShMCreate: allocated wp_ca_adm at 0634BB30
M DpShMCreate: allocated appc_ca_adm at 063518F0
M DpShMCreate: allocated comm_adm_list at 06353830
M DpShMCreate: allocated comm_adm at 06353848
M DpShMCreate: allocated vmc_adm_list at 0639A518
M DpShMCreate: system runs without vmc_adm
M DpShMCreate: allocated ca_info at 0639A540
M DpShMCreate: allocated wall_adm at 0639A548
X EmInit: MmSetImplementation( 2 ).
X <ES> client 2 initializing ....
X <ES> InitFreeList
X Using implementation flat
M <EsNT> Memory Reset disabled as NT default
X ES initialized.
M
M calling db_connect ...
C Got ORACLE_HOME=c:\oracle\ora92 from environment
C Client NLS settings: AMERICAN_AMERICA.UTF8
C Logon as OPS$-user to get SAPSXI's password
C Connecting as /@SXI on connection 0 ...
C Attaching to DB Server SXI (con_hdl=0,svchp=04494404,svrhp=04495074)
C
C Starting user session (con_hdl=0,svchp=04494404,srvhp=04495074,usrhp=0449D8AC)
C
C Now I'm connected to ORACLE
C Got SAPSXI's password from OPS$-user
C Disconnecting from connection 0 ...
C Closing user session (con_hdl=0,svchp=04494404,usrhp=0449D8AC)
C Now I'm disconnected from ORACLE
C Connecting as SAPSXI/<pwd>@SXI on connection 0 ...
C Starting user session (con_hdl=0,svchp=04494404,srvhp=04495074,usrhp=0449D8AC)
C Now I'm connected to ORACLE
C Database NLS settings: AMERICAN_AMERICA.UTF8
C Database instance sxi is running on STARXI with ORACLE version 9.2.0.5.0 since 20081020
B Connection 0 opened
B Wp Hdl ConName ConId ConState TX PRM RCT TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 ACTIVE NO YES NO 000 255 255 20081020 123752 STARXI
M db_connect o.k.
I MtxInit: 2 0 0
M SHM_PRES_BUF (addr: 08230040, size: 4400128)
M SHM_ROLL_AREA (addr: 62E40040, size: 77594624)
M SHM_PAGING_AREA (addr: 08670040, size: 39845888)
M SHM_ROLL_ADM (addr: 0AC80040, size: 775412)
M SHM_PAGING_ADM (addr: 0AD40040, size: 525344)
M ThCreateNoBuffer allocated 540152 bytes for 1000 entries at 0ADD0040
M ThCreateNoBuffer index size: 3000 elems
M ThCreateVBAdm allocated 12160 bytes (50 server) at 0AE60040
X EmInit: MmSetImplementation( 2 ).
X <ES> client 2 initializing ....
X Using implementation flat
X ES initialized.
B
B db_con_shm_ini: WP_ID = 2, WP_CNT = 10
B dbtbxbuf: Buffer TABL (addr: 103D00C8, size: 30000128, end: 1206C4C8)
B dbtbxbuf: Profile: max_objects = 5000, displace = 1, reorg = 1
B dbtbxbuf: request_unit = 2000, sync_reload = 5, inval_reload = 5
B dbtbxbuf: protect_shm = 0, force_checks = 0
B dbtbxbuf: tsize_retry = 14302848
B ***LOG BB0=> buffer TABL started with length 30000128 bytes [dbtbxbuf#7 @ 15714] [dbtbxbuf1571 4]
B dbtbxbuf: Buffer TABLP (addr: 0E4000C8, size: 10240000, end: 0EDC40C8)
B dbtbxbuf: Profile: max_objects = 500, displace = 1, reorg = 1
B dbtbxbuf: request_unit = 2000, sync_reload = 5, inval_reload = 5
B dbtbxbuf: protect_shm = 0, force_checks = 0
B dbtbxbuf: tsize_retry = 5046656
B ***LOG BB0=> buffer TABLP started with length 10240000 bytes [dbtbxbuf#7 @ 15714] [dbtbxbuf1571 4]
B dbtbxbuf: Reading TBX statistics:
B dbtbxbuf: 41 object entries precreated
B Layout of EIBUF buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 344 = 344
B 2: 10 * 20 = 200
B 3: 4001 * 48 = 192048
B 4: 2000 * 232 = 464000
B 5: 4001 * 4 = 16004
B 6: 1 * 200 = 200
B 7: 65 * 4 = 260
B 8: 13754 * 256 = 3521024
B Tracing = 0, Shm Protection = 0, Force checks = 0
B dbexpbuf: Buffer EIBUF (addr: 0EDE00D0, size: 4194304, end: 0F1E00D0)
B ***LOG BB0=> buffer EIBUF started with length 4096k bytes [dbexpbuf#5 @ 2322] [dbexpbuf2322 ]
B Layout of ESM buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 344 = 344
B 2: 10 * 20 = 200
B 3: 4001 * 48 = 192048
B 4: 2000 * 232 = 464000
B 5: 4001 * 4 = 16004
B 6: 1 * 200 = 200
B 7: 65 * 4 = 260
B 8: 13754 * 256 = 3521024
B Tracing = 0, Shm Protection = 0, Force checks = 0
B dbexpbuf: Buffer ESM (addr: 0F1F00D0, size: 4194304, end: 0F5F00D0)
B ***LOG BB0=> buffer ESM started with length 4096k bytes [dbexpbuf#5 @ 2322] [dbexpbuf2322 ]
B Layout of CUA buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 344 = 344
B 2: 10 * 20 = 200
B 3: 3001 * 48 = 144048
B 4: 1500 * 232 = 348000
B 5: 3001 * 4 = 12004
B 6: 1 * 200 = 200
B 7: 193 * 4 = 772
B 8: 5012 * 512 = 2566144
B Tracing = 0, Shm Protection = 0, Force checks = 0
B dbexpbuf: Buffer CUA (addr: 0F6000D0, size: 3072000, end: 0F8EE0D0)
B ***LOG BB0=> buffer CUA started with length 3000k bytes [dbexpbuf#5 @ 2322] [dbexpbuf2322 ]
B Layout of OTR buffer shared memory:
B 0: 1 * 4 = 4
B 1: 1 * 344 = 344
B 2: 10 * 20 = 200
B 3: 4001 * 48 = 192048
B 4: 2000 * 232 = 464000
B 5: 4001 * 4 = 16004
B 6: 1 * 200 = 200
B 7: 81 * 4 = 324
B 8: 13754 * 256 = 3521024
B Tracing = 0, Shm Protection = 0, Force checks = 0
B dbexpbuf: Buffer OTR (addr: 0F8F00D0, size: 4194304, end: 0FCF00D0)
B ***LOG BB0=> buffer OTR started with length 4096k bytes [dbexpbuf#5 @ 2322] [dbexpbuf2322 ]
B ***LOG BB0=> buffer CALE started with length 500000 bytes [dbcalbuf#1 @ 2206] [dbcalbuf2206 ]
B dbtran INFO (init_connection '<DEFAULT>' [ORACLE:640.00]):
B max_blocking_factor = 15, max_in_blocking_factor = 5,
B min_blocking_factor = 10, min_in_blocking_factor = 5,
B prefer_union_all = 0, prefer_union_for_select_all = 0,
B prefer_fix_blocking = 0, prefer_in_itab_opt = 1,
B convert AVG = 0, alias table FUPD = 0,
B escape_as_literal = 1, opt GE LE to BETWEEN = 0,
B select * =0x0f, character encoding = STD / <none>:-,
B use_hints = abap->1, dbif->0x1, upto->2147483647, rule_in->0,
B rule_fae->0, concat_fae->0, concat_fae_or->0
M
M PfHIndInitialize: memory=<0AEEC488>, header=<0AEEC488>, records=<0AEEC4D0>
M SecAudit(init_sel_info): init of SCSA completed: 02 slots used
M ***LOG AV6=> 02& [rsauwr1.c 1619]
M SsfSapSecin: automatic application server initialization for SAPSECULIB
N SsfSapSecin: Looking for PSE in database
N SsfPseLoad: started...(path=C:\usr\sap\SXI\DVEBMGS00\sec, AS=starxi, instanceid=00)
N
N SsfPseLoad: Downloading file C:\usr\sap\SXI\DVEBMGS00\sec\SAPSYS.pse (client: , key: SYSPSE, len: 1078)
N SsfPseLoad: ended (1 of 1 sucessfully loaded, 1 checked...
N MskiCreateLogonTicketCache: Logon Ticket cache created in shared memory.
N MskiCreateLogonTicketCache: Logon Ticket cache pointer registered in shared memory.
M rdisp/reinitialize_code_page -> 0
M icm/accept_remote_trace_level -> 0
M rdisp/no_hooks_for_sqlbreak -> 0
S
S *** init spool environment
S initialize debug system
T Stack direction is downwards.
T debug control: prepare exclude for printer trace
T new memory block 121963B0
S spool kernel/ddic check: Ok
S using table TSP02FX for frontend printing
S 1 spool work process(es) found
S frontend print via spool service enabled
S printer list size is 150
S printer type list size is 50
S queue size (profile) = 300
S hostspool list size = 3000
S option list size is 30
S intervals: query=50, rescan=1800, global=300 info=120
S processing queue enabled
S creating spool memory service RSPO-RCLOCKS at 0FEB00A8
S doing lock recovery
S setting server cache root
S using server cache size 100 (prof=100)
S creating spool memory service RSPO-SERVERCACHE at 0FEB0370
S using messages for server info
S size of spec char cache entry: 297028 bytes (timeout 100 sec)
S size of open spool request entry: 2132 bytes
S immediate print option for implicitely closed spool requests is disabled
A
A
A -PXA--
A PXA INITIALIZATION
A PXA: Fragment Size too small: 73 MB, reducing # of fragments
A System page size: 4kb, admin_size: 5032kb.
A PXA allocated (address 67850040, size 150000K)
A System name
A ORACLE...........................SXI........20081004121019.....................................
A is used for RFC security.
A Sharedbuffer token: 41534050...33 (len: 111)====== 2b61c190857e36a8681ef39a...
A abap/pxa = shared protect gen_remote
A PXA INITIALIZATION FINISHED
A -PXA--
A
A ABAP ShmAdm initialized (addr=579F4000 leng=20955136 end=58DF0000)
A >> Shm MMADM area (addr=57E69DF0 leng=126176 end=57E88AD0)
A >> Shm MMDAT area (addr=57E89000 leng=16150528 end=58DF0000)
A RFC rfc/signon_error_log = -1
A RFC rfc/dump_connection_info = 0
A RFC rfc/dump_client_info = 0
A RFC rfc/cp_convert/ignore_error = 1
A RFC rfc/cp_convert/conversion_char = 23
A RFC rfc/wan_compress/threshold = 251
A RFC rfc/recorder_pcs not set, use defaule value: 2
A RFC rfc/delta_trc_level not set, use default value: 0
A RFC rfc/no_uuid_check not set, use default value: 0
A RFC Method> initialize RemObjDriver for ABAP Objects
A Hotpackage version: 9
M ThrCreateShObjects allocated 10568 bytes at 0FFD0040
M ThVBStartUp: restart pending update requests
M
M ThVBAutoStart: update-auto-delete
N SsfSapSecin: putenv(SECUDIR=C:\usr\sap\SXI\DVEBMGS00\sec): ok
N SsfSapSecin: PSE C:\usr\sap\SXI\DVEBMGS00\sec\SAPSYS.pse found!
N
N =================================================
N === SSF INITIALIZATION:
N ===...SSF Security Toolkit name SAPSECULIB .
N ===...SSF trace level is 0 .
N ===...SSF library is C:\usr\sap\SXI\SYS\exe\run\sapsecu.dll .
N ===...SSF hash algorithm is SHA1 .
N ===...SSF symmetric encryption algorithm is DES-CBC .
N ===...sucessfully completed.
N =================================================
N MskiInitLogonTicketCacheHandle: Logon Ticket cache pointer retrieved from shared memory.
N MskiInitLogonTicketCacheHandle: Workprocess runs with Logon Ticket cache.
W =================================================
W === ipl_Init() called
W ITS Plugin: Path dw_gui
W ITS Plugin: Description ITS Plugin - ITS rendering DLL
W ITS Plugin: sizeof(SAP_UC) 2
W ITS Plugin: Release: 640, [6400.0.43.20020600]
W ITS Plugin: Int.version, [31]
W ITS Plugin: Feature set: [3]
W ===... Calling itsp_Init in external dll ===>
W === ipl_Init() returns 0, ITSPE_OK: OK
W =================================================
M MBUF info for hooks: MS component UP
M ThSetEnqName: set enqname by profile
M ThISetEnqname: enq name = >starxi_SXI_00 <
E
E *************** EnqId_EN_ActionAtMsUpHook ***************
E Hook on upcoming Ms (with EnqSrv), get auth EnqId and check it locally
E Enqueue Info: enque/disable_replication = 2
E Enqueue Info: replication disabled
E
E
E *************** ObjShMem_CheckAuthoritativeEnqId ***************
E Checking authoritative EnqId from EnqSrv into ObjShMem
E ObjShMem_CheckAuthoritativeEnqId: ObjShMem ...
E EnqId.EnqTabCreaTime = -999
E EnqId.RandomNumber = -999
E ReqOrd.TimeInSecs = -999
E ReqOrd.ReqNumberThisSec = -999
E ObjShMem_CheckAuthoritativeEnqId: ObjShMem ...
E EnqId.EnqTabCreaTime = -999
E EnqId.RandomNumber = -999
E ReqOrd.TimeInSecs = -999
E ReqOrd.ReqNumberThisSec = -999
E ObjShMem_CheckAuthoritativeEnqId: EnqId is initial in ShMem
E ObjShMem_CheckAuthoritativeEnqId: Overwrite incoming auth EnqId, continue
E EnqId inscribed into initial ObjShMem: (ObjShMem_CheckAuthoritativeEnqId)
E -SHMEM--
E EnqId: EnqTabCreaTime/RandomNumber = 20.10.2008 12:38:10 1224486490 / 4140
E ReqOrd at Srv: TimeInSecs/ReqNumberThisSec = 20.10.2008 12:38:11 1224486491 / 1
E ReqOrd at Cli: TimeInSecs/ReqNumberThisSec = 20.10.2008 12:38:11 1224486491 / 1
E Status: STATUS_OK
E -
M ThActivateServer: state = STARTING
L Begin of BtcSysStartRaise
L Raise event SAP_SYSTEM_START with parameter <starxi_SXI_00 >
L End of BtcSysStartRaise
I
I MPI<c>9#3 Peak buffer usage: 5 (@ 64 KB)
M
M *** WARNING => ThCheckReqInfo: req_info & DP_CANT_HANDLE_REQ
M return number range rc 12
M *** WARNING => ThNoGet: get from object (cli/obj/subobj/range = 000/ALAUTOUID / /01) returned rc 12
S
S server @>SSRV:starxi_SXI_00@< appears or changes (state 1)
B table logging switched off for all clients
S
S server @>SSRV:starxi_SXI_00@< appears or changes (state 1)
M
M hostaddrlist return 0
M
M hostaddrlist return 0
M
M hostaddrlist return 0
M hostaddrlist return 0
M hostaddrlist return 0
Regards,
Varun.You probably made the same mistake as I did and added the tables manually to the "sample" database instead of the "sun-appserv-samples" database.
marc
Maybe you are looking for
-
How to share the i-Photo Library on the same i-Mac with 2 Accounts?
I am using a iMac running OSX 10.8.4. there are 2 accounts, mine and my wife's. we wish to be able to share the i-Photo Library on the same computer. So I copied the i-Photo library from my Library folder to the Users Shared folder and then deleted t
-
Home Sharing only transfers some songs, asks to reauhorize for others....
I have the latest iTunes installed on both computers. When trying to use the Home Share, it transferred only 250 of the 350 songs from the main computer's library. I can see all 350 songs in the Home Share section. If I try to play or import one of t
-
Unstable green artifacts + "unable to duplicate problem" = ugh
I just posted a lengthy, lengthy rant on my blog-- http://tiffleigh.livejournal.com/93938.html --regarding some morale-sapping experiences I've had with my G4 Powerbook (PowerPC 1.33 GHz) with TekServe in NYC, and AppleCare in general. Their service
-
HP Photosmart c4780 refusing to NOT print in color.
Hey guys, first time poster. I generally consider myself to be tech savvy, but I have run into a bit of a problem. I am trying to fix my girlfriend's parent's printer, and it is giving me the most peculiar issue. It is an HP Photosmart C4780, wireles
-
NS500 won't connect to my wireless network. All apple network- including airport.
Tried WPS button and so-called manual setup. After cable is unplugged thing goes ******. Any ideas?