Problems with JbuilderX anda Data Access componentes
Hi everyone, i�m working with JBuilderX Foundation, I�m trying to create an applet wich can access to a database, when I run de project with F9 key, its work right but when I compile it and try to run from a html page its doesn�t work, and the java console shows me the following error:
General Exception
NoDefClassFound:com/borland/database/DataSet.
Thanks
Put that .class file or JAR in your CLASSPATH for JBuilder.
%
Similar Messages
-
How to Install Oracle Data Access Components (ODAC) on Windows Server 2003?
I recently installed "32-bit Oracle Data Access Components (ODAC) with Oracle Developer Tools for Visual Studio" on my computer (Windows 7, 64bit). Everything seems fine and I can develop and run my application in Visual Studio 2010 and IIS 7.
Now, when I deploy my application to the Server, it raises error:
Exception: System.TypeInitializationException: The type initializer for 'Oracle.DataAccess.Client.OracleCommand' threw an exception. ---> Oracle.DataAccess.Client.OracleException: The provider is not compatible with the version of Oracle client
Obviously I need to install ODAC on the server, too. My server is:
- Windows 2003 32 bit R2 (I know, I know!)
- IIS 6
So. I downloaded the same installation from Oracle website (ODAC 11.2 Release 5 and Oracle Developer Tools for Visual Studio [11.2.0.3.20]) and installed it on the server. But still getting the same error.
PS: When I was installing, I chose Oracle Data Access Component for Oracle Client 11.2.0.3.20 in Oracle Universal Installer. hmmmm. Should I choose "Oracle Server" instead? Screenshot
Edited by: 1000434 on Apr 17, 2013 6:35 AM
Edited by: 1000434 on Apr 17, 2013 6:36 AMODP.NET, Unmanaged Driver uses unmanaged dependencies in the Oracle Client. The error you see means you have another Oracle Client installed on the Win2003 machine and ODP.NET is attempting to load the incorrect Oracle Client version, rather than the version you installed ODP.NET with.
What you need to do is direct ODP.NET where to find the correct version of its unamanaged Oracle Client dependencies. This will be generally the bin directory of your Oracle Client home that was installed with ODP.NET.
You can learn more about DllPath here:
http://docs.oracle.com/cd/E20434_01/doc/win.112/e23174/InstallODP.htm#sthref94
If you're not familiar with how to set ODP.NET settings in the Registry or .NET config files, you can read how to do that here:
http://docs.oracle.com/cd/E20434_01/doc/win.112/e23174/featConfig.htm#sthref106 -
How can I debug a problem with the 3g data connection on my iPhone 4s?
This question didn't get any answers in the "Using iPhone" forum. Thought I would re-ask here. Note, I had to reset the network again today 2 days after the last reset:
I've been having intermittent problems with my 3g data connection on my iPhone 4s on ATT. Whenever this happens I see full bars etc, but can't browse from safari or get any data in other apps. My wife's iPhone 4 right next to me has no issues at all. Switching on/off airplane mode and turning off/on Cellular Data does not help. The only thing that helps is resetting the Network Settings or hard restarting the phone.
I figured my problems were hardware related so I took my phone in for a replacement the other day. Things started out fine but after I upgraded it to 5.01 and restored my backup and now I am back to having the same issue today. I assume the issue is with something coming from my backup / restore but is there any way for me to pinpoint what could be causing the issue. I have a lot of apps, I'd rather not have to reinstall and set them all backup manually, but I would if I knew that would fix the problem... but for all I know one of the apps could be causing it.
Anyone have any logs I can check or testing I can do on my end?
Thanks!Unfortunately, Apple does not make any logs available to the average schmoe (like us) for networking, kernel dumps, or anything else (assuming, of course, it is not jailbroken).
Your best bet is to take it back into the store. Ask them to look at the notes in GCRM regarding the last time this occured, then explain after upgrading to 5.01 it is occuring again. Then ask them for a phone swap since it is a reoccuring issue and doesn't sound like an OS/SW issue. Good luck! -
How to check if Oracle Data Access Components is installed?
How to check if Oracle Data Access Components is installed and version on my computer?
Also How to check if Oracle Data Provider is installed and version?
TIA
Steve42Regedit HKLM->Software->Oracle. See what's there...
At the very least, that can give you paths and can check file versions from there. -
Problem with displaying chart data
Hello everybody,
I have problem with displaying chart data correctly. I'm using a cartesian chart with DateTimeAxis. The stockdata I'm using is for half a year and
with ticks for every day. The problem is, that Flex displays the data of february in march together with the data of march. I have added a picture
to show the result. The second column of the grid is for february and the third for march.
Could anybody help me with this problem. Thanks in advance.
ThomasHi Chris,
thanks for your reply. Here you get the source code:
The following method creates the LineChart:
public function init():void
model.upperChart = this;
model.upperChartStyle.setChartViewStyle(this);
this.hAxis = new MyDateTimeAxis();
model.upperChartData.configureHAxis(this.hAxis);
this.vAxis = new LinearAxis();
model.upperChartData.configureVAxis(this.vAxis);
this.vAxisTitle = new Label();
this.vAxisTitle.text = model.upperChartData.getVAxisTitle();
model.upperChartStyle.setVAxisTitleLabelStyle(this.vAxisTitle);
this.vAxisTitle.x = 10
this.vAxisTitle.y = 0;
this.addChild(this.vAxisTitle);
this.myChart = new CartesianChart();
//remove default datatip
this.myChart.showDataTips = false;
this.myChart.x = 10;
this.myChart.y = 0;
this.myChart.width = 768;
this.myChart.height = 196;
model.upperChartStyle.setChartStyle(this.myChart);
this.addChild(this.myChart);
//Remove line shadow
this.myChart.seriesFilters = null;
this.myChart.horizontalAxis = this.hAxis;
this.myChart.verticalAxis = this.vAxis;
this.hAxisRenderer = new AxisRenderer();
model.upperChartData.configureHAxisRenderer(this.hAxisRenderer);
this.hAxisRenderer.axis = this.hAxis;
model.upperChartStyle.setHAxisRendererStyle(this.hAxisRenderer);
this.myChart.horizontalAxisRenderers.push(this.hAxisRenderer);
this.vAxisRenderer = new AxisRenderer();
model.upperChartData.configureVAxisRenderer(this.vAxisRenderer);
this.vAxisRenderer.axis = this.vAxis;
model.upperChartStyle.setVAxisRendererStyle(this.vAxisRenderer);
this.myChart.verticalAxisRenderers.push(this.vAxisRenderer);
model.upperChartStyle.setVAxisDataLabelStyle(this.vAxisMinLabel);
this.addChild(this.vAxisMinLabel);
model.upperChartStyle.setSeriesStyle(model.upperChartData.series, model.upperChartData.shares);
this.myChart.dataProvider = model.upperChartData.dataProvider;
this.myChart.series = model.upperChartData.series;
The data for dataprovider and series you can see in attached file dataprovider.xml.
xfield is equivalent to timestamp
yfield is equivalent to absolute
I think the problem could be the configuration of the datetimeaxis. The following method shows the parameter for the datetimeaxis:
public function configureHAxis(axis:MyDateTimeAxis):void
axis.parseFunction = UtilityClass.parseYYYYMMDDHHNNSSString2Date;
axis.dataUnits = "days";
axis.dataInterval = 1;
axis.title = "";
axis.minimum = new Date(UtilityClass.parseYYYYMMDDHHNNSSString2Date("2009-01-07 00:00:00").time);
axis.maximum = new Date(UtilityClass.parseYYYYMMDDHHNNSSString2Date("2009-07-06 00:00:00").time);
And finally you get the function, that I'm using for string to date conversion:
public static function parseYYYYMMDDHHNNSSString2Date(input:String):Date
var result:Date = new Date();
var year:Number = Number(input.substring(0,4));
var month:Number = Number(input.substring(5,7));
var date:Number = Number(input.substring(8,10));
var hours:Number = Number(input.substring(11,13));
var minutes:Number = Number(input.substring(14,16));
var seconds:Number = Number(input.substring(17,19));
result.setUTCFullYear(year);
result.setUTCMonth(month-1);
result.setUTCDate(date);
result.setUTCHours(hours);
result.setUTCMinutes(minutes);
result.setUTCSeconds(seconds);
return result;
I hope that will help to locate the reason for the wrong chart visualization.
Thanks for any help. -
Sql Devloper 4.0.0.13 - problems with displaying user data types
Hi,
I have installed new version of sqldeveloper and have discovered some problems with displaying user data types. The data that is described as VARCHAR2 are displayed with ‘???’.
The problem persist in table view, script output and exported files.
My type is described as follows:
create or replace TYPE "DPTY_ADRESA" AS OBJECT
ID_DPSF_OPCINE NUMBER,
ID_DPSF_MJESTA NUMBER,
OPCINA VARCHAR2(100),
MJESTO VARCHAR2(100),
ULICA VARCHAR2(200),
BROJ VARCHAR2(20),
SPRAT VARCHAR2(20),
OSTALO VARCHAR2(100),
CONSTRUCTOR FUNCTION dpty_adresa RETURN SELF AS RESULT
add MEMBER FUNCTION dajAdresu RETURN VARCHAR2 cascade;
when make select column from table that contains this type I get next results:
CASE 1:
SQLDeveloper Version 3.2.20.09; Build MAIN-09.87; JDK 1.6.0_43; Windows 7 64 bit
Select:
select id, adresalokacija
from dptr_saglasnosti
where id = 1;
Result:
ID ADRESALOKACIJA
1 COMP.DPTY_ADRESA(124,4913,'TRAIK','TURBE','BABANA','3452','0',NULL)
END CASE 1;
CASE 2:
SQLDeveloper Version 4.0.0.13; Build MAIN-13.80; JDK 1.7.0_40; Windows 7 64 bit
Select1:
select id, adresalokacija
from dptr_saglasnosti
where id = 1;
Result1:
ID ADRESALOKACIJA
1 COMP.DPTY_ADRESA(124,4913,'???','???','???','???','???',NULL)
But if I select one element it is displayed normal.
Select2:
select id, a.adresalokacija.opcina
from dptr_saglasnosti a
where id = 1;
Result2:
ID ADRESALOKACIJA.OPCINA
1 TRAVNIK
END CASE 2;
I have tried this scenario on three different pc with same output.
Pleas help me to get rid of the '???' in result.
Best Regards,
OmerI tried on SQLDeveloper Version 4.0.0.13; Build MAIN-13.80; JDK 1.7.0_45; Windows 7 64 bit; NLS setting is default
all data can show,No ??? in result
Test step as following:
create or replace TYPE "DPTY_ADRESA" AS OBJECT
ID_DPSF_OPCINE NUMBER,
ID_DPSF_MJESTA NUMBER,
OPCINA VARCHAR2(100),
MJESTO VARCHAR2(100),
ULICA VARCHAR2(200),
BROJ VARCHAR2(20),
SPRAT VARCHAR2(20),
OSTALO VARCHAR2(100),
CONSTRUCTOR FUNCTION dpty_adresa RETURN SELF AS RESULT
alter TYPE "DPTY_ADRESA" add MEMBER FUNCTION dajAdresu RETURN VARCHAR2 cascade;
CREATE TABLE dptr_saglasnosti (
adresalokacija DPTY_ADRESA,
id number);
INSERT INTO dptr_saglasnosti VALUES (
DPTY_ADRESA (65,225,'Vrinda Mills', '1-800-555-4412','sss','aaaa','eeeee','attta'),1 );
select id, adresalokacija from dptr_saglasnosti where id = 1;
ID ADRESALOKACIJA
1 HRCP.DPTY_ADRESA(65,225,'Vrinda Mills','1-800-555-4412','sss','aaaa','eeeee','attta') -
No Setup.exe in 64-bit Oracle Data Access Components (ODAC) Dowload
Why is there no Setup.exe in the 64-bit Oracle Data Access Components (ODAC) Download? Are the only instructions for installing in the dowloaded readme file?
You're probably looking at an XCOPY bundle.
If you're looking for an x64 11.2 bundle installed via the Oracle Installer, you'd need to get either the 11201 full client on OTN, or the 11202 full client on My Oracle Support. The 11202 full client includes support for .NET 4 if you need that.
Hope it helps,
Greg -
When I try and restore from iCloud it says problem with back up data help !!!
Can anyone help me back up my phone from iCloud. It is saying there is a problem with my data
Hey Shopaholic1181,
Thanks for using Apple Support Communities.
iCloud: Understanding alert messages when restoring from an iCloud Backup
http://support.apple.com/kb/TS4585
"Your iPhone cannot be restored because there is a problem with your backup data. Choose a different backup to restore from."
Your backup does not appear to be usable. If you receive this alert, you should check the iCloud System Status at the iCloud Support website to make sure there are not any issues occurring with iCloud Backup. If there is not a widespread issue notated on the iCloud System Status, the error may self-resolve if you wait several minutes and try again. If issues persist, you should contact iCloud Support via the iCloud Support website.
Have a nice day,
Mario -
Problem with Exporter for MS Access 3.2 in SQL Developer
Hi,
I have problem with exporting tables and data from MS Access to XML with Exporter for MS Access 2000.
This error ocurr: 'Error #5 - XML Exporter'
When I use Exporter for MS Access 2002 this error ocurr: 'Error #3478 - XML Exporter'
Any leads how to solve this problem ?Thread moved to Forum Home » Database » SQL Developer
SQL Developer
Please, stay tune there.
Nicolas. -
Problem with Real Time Data Acquisition
Hello,
I tried to built a RDA data flow according to the SAP-Help and this blog (/people/kamaljeet.kharbanda/blog/2006/11/13/real-time-data-acquisition-bi2004s), but I ran into a problem. Everything seems to be fine, but even though the daemon is running no new data is added to the DSO. I'll explain in detail what steps I took and hope someone can pinpoint my error(s).
System is BW4 on SPS 17. My datasource as well as my DSObject are in the same system
1.) Created a transparent table with a timestamp-field for generic delta as a local object.
2.) Created a generic datasource from view/table (used the above table), marked it as realtime-enabled and used timestamp as delta-specific field.
3.) Replicated the metadata for my datasource and activated it.
4.) Created a Data Storage Object with infoobjects corresponding to the table fields
5.) Created a transformation between DataSource and DSO
6.) Created a DTP from Data Source to DSO. The type is realtime-DTP.
7.) Created an InfoPackage for Delta-Initial Load. Update mode: Initialize Delta Process -> Initialization with Data Transfer.
8.) Then I changed my DTP (step 6) to "normal DTP" and executed it. Then activated the data in the DSO. The datasets from the table (which i filled with an ABAP-program) were successfully loaded and activated. So now my DSO contains 5 datasets.
9.) Changed the DTP back to "realtime DTP"
10.) Created an InfoPackage for RDA. Adapter is set to "Realtime extraction from SAP System"
11.) Created a daemon, assigned the IP for RDA and the DTP to the daemon and started it up.
12.) Executed my ABAP program to added 3 datasets to the table which is used as a datasource.
So now in my source table there are 8 datasets, but the daemon won't load them. In my RDA-Monitor (trx rsrda) it shows my daemon, the assigned IP and the assigned DTP (status green). Under the IP there's one yellow request (that should be right according to the help), but unlike the picture in the blog (link see above) there's no request under the DTP.
Job overview (sm37) shows an active batch job and some jobs that are ready (every 10minutes a new batch starts and the old one is closed). the job log shows, that the daemon runs, but loads no data...
i think it might be a problem with the delta extraction somewhere, because the intial load works fine and there are no errors anywhere.
Edit: perhaps my settings in the data source unter tab: extraction are wrong?
Delta process: AIE After Images By Extractor (can't change that)
Direct Access: Allowd
real Time: Real-Time DA Supported
Adapter: realtime data extraction (also tried Access to SAP Data through Service API which seems senseless)
Data Format: Fixed Lenght
Anyone can explain what those fileds mean and which one i should use?
Edited by: Christoph Jender on Apr 10, 2008 2:48 PM
Edited by: Christoph Jender on Apr 10, 2008 3:33 PMHi again, another thing i'd like to try is to just active a business content datasource which is realtime-enabled and has the ability to dynamically add some values so that i can test if it works. but i have no idea what business content would be applicable here, any ideas on that perhaps?
-
Problem with extract huge data in WEBI (Errors:WIO 30280 and ERR_WIS_30270)
Hi gurus, need your help.
When we run the query for the report we get an error in Web Intellegence .
This error may be two types. And their rotation occurs randomly.
First error: There is no memory available. Please close document to free memory (WIO 30280)
Second error: An internal error occurred while calling the 'processDPCommands' API. (ERR_WIS_30270)
When we try reopen WEB Intelligence, or reloading servers or machine, we have no any results and get error again.
I was try change different parametrs in universe designer for connection and universe, in central managment console for WEBI, but it's not solve problem
This query select data from huge table (4,7 million rows), and when I use limit for maximum rows in WEBI my report working correctly.
Is there any way to solve these problems associated with large data? What is invoke this problem when we try to get full data?
We use Business Objects Enterprise XI 3.1 version 12.4.0.966
Our system Windows Server R2 Enterprise 2008 SP1 (64-bit system), Processor Intel 2.67 GHz (2 processors), RAM 8 Gb.
Thanks.
RuslanHi Brad,
here we are talking about XI3.1 which has the limitations inherited from the operating system. as this blog post explains with plenty of details.
In BI4.0 you can leverage larger datasets without any problems however you need to properly size and configure the services.
There are several documents out there:
How to configure the APS http://scn.sap.com/docs/DOC-31711
Companion Guide
https://service.sap.com/~sapdownload/011000358700000307202011E/SBO_BI_4_0_Companion_V4.pdf
Web Intelligence Sizing Guide
https://service.sap.com/~sapdownload/011000358700001403692011E/BI_4_0_WEBI_NEW.pdf
Best regards,
Simone -
Problem with breakpoints in Web Dynpro components
Hello experts,
I have problems with breakpoints in methods of Web Dynpro components. Sometimes everything works as expected and a new window with the debugger comes up. Sometimes the breakpoints are ignored, and debugging is impossible. It even happens that a colleague can debug and I can't or vice versa.
I am setting breakpoints with button "Set/Delete External Breakpoint", and the message always is "Breakpoint is set for user xxx". But sometimes when I display a method there is a warning that external debugging is not active. What does that mean and what is the reason for that?
As adviced in the SAP help document "Debugging Web Dynpro ABAP Applications" I have enabled the new Front-End Editor and the new debugger, but still the problem exists. Does anybody experience similar problems or have an explanation for this?
A second question concerns the different types of break points. My Web Dynpro component has an assistance class, and if I want to set a breakpoint there, I can choose between a session breakpoint and an external breakpoint. What exactly is the difference between these types? And here in the forum I sometimes read about internal breakpoints. Is this even a third type, or the same as session breakpoints?
Thanks, KarstenHi Kartsen.
External Breakpoint -> can be started from outside the SAP GUI (e.g. WebDynpro)
Session breakpoints are used if you start a programm or something like that in SAP GUI.
I have the same problem ... sometimes he does not recocnize a new break point ... so I just reload the page and the break point works.
If external debugging is not active, you habve to activate it in SE80 Utilities->External Breakpoints.
Also make sure that in your Settings the correct debugging user is set:
Utilities->Abap_Editor->Debugging.
Cheers,
Sascha -
Problem with logminer in Data Guard configuration
Hi all,
I experience strange problem with applying of the logs in DataGuard configuration on the logical standby database side.
I've set up the configuration step by step as it is described in documentation (Oracle Data Guard Concepts and Administration, chapter 4).
Everything went fine until I issued
ALTER DATABASE START LOGICAL STANDBY APPLY;
I saw that log applying process was started by checking the output of
SELECT NAME, VALUE FROM V$LOGSTDBY_STATS WHERE NAME = 'coordinator state';
and
SELECT TYPE, HIGH_SCN, STATUS FROM V$LOGSTDBY;
but in few minutes it stoped and quering DBA_LOGSTDBY_EVENTS I saw the following records:
ORA-16111: log mining and apply setting up
ORA-01332: internal Logminer Dictionary error
Alert log says the following:
LOGSTDBY event: ORA-01332: internal Logminer Dictionary error
Wed Jan 21 16:57:57 2004
Errors in file /opt/oracle/admin/whouse/bdump/whouse_lsp0_5817.trc:
ORA-01332: internal Logminer Dictionary error
Here is the end of the whouse_lsp0_5817.trc
error 1332 detected in background process
OPIRIP: Uncaught error 447. Error stack:
ORA-00447: fatal error in background process
ORA-01332: internal Logminer Dictionary error
But the most useful info I found in one more trace file (whouse_p001_5821.trc):
krvxmrs: Leaving by exception: 604
ORA-00604: error occurred at recursive SQL level 1
ORA-01031: insufficient privileges
ORA-06512: at "SYS.LOGMNR_KRVRDREPDICT3", line 68
ORA-06512: at line 1
Seems that somewhere the correct privileges were not given or smth like this. By the way I was doing all the operations under SYS account (as SYSDBA).
Could smb give me a clue where could be my mistake or what was done in the wrong way?
Thank you in advance.Which is your SSIS version?
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My MSDN Page
My Personal Blog
My Facebook Page -
Problem with writing continuous data to excel using using Report Generation vi's
Hey Everyone,
I am trying to read the data from DAQ and write to excel continuously using Report Generation vi's.
But when I run the VI, it writes only one interation of the while loop (gathering data from DAQ continuously) and doesn't append the data into the same file when I run it again after stoping the VI.
I have attached the VI i created. Please let me know if you have any idea to solve this issue.
Thanks
Attachments:
sample 5.vi 35 KBThere are two problems with your VI. First, the basic logic of writing/appending to a file (Excel, TDMS, anything) should go something like this: Open the file, position yourself at the end of the file, then, in the loop, acquire data and write it to the file until you are finished with data acquisition. When you exit the acquire/write to file loop, then close the file. In particular, the opening and the closing of the file should not be inside the loop.
As others have pointed out, writing to Excel might not be optimal, particularly if you are acquiring data at a high rate (and would therefore be writing a lot of data). We actually use Excel in our data acquisition routine, mainly reading from a WorkSheet to get the parameters of a particular stimulus, but also writing the outcome of the response to the stimulus. As it happens, our "acquisition rate" in this example is on the order of several samples per minute, so there's no problem using Excel (we also sample 16 channels of analog data at 1 KHz -- this gets written as a binary file).
Second, if you really do want to use Excel, use the (existing) Excel file to which you want to append as the "template" argument of the New Report function. Then use the Excel Get Last Row function to position yourself at "end of file", as noted above.
Good Luck.
Bob Schor -
Another problem with updating in ms access
Hello there,
Me too has a problem with the update statement and ms access (using 2003).
I've read many other problems, but a way to the solution that worked for I didn't found :S
The strange thing with my problem is that i'm able to update integer fields in the database, but not varchar/text fields.
I'm not getting any exception back, the database is closed (i'm very sure), so HELP! :)
I'll show you the code i'm connecting with the database:
public void openDatabaseConnection() {
// Eerst controleren of de DatabaseDriver wel aanwezig is.
try {
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
catch (Exception e) {
System.out.println("Looking for Class: " + e.toString());
// Nu kan de connectie met de database opgezet worden.
try {
theDatabaseConnection = DriverManager.getConnection("jdbc:odbc:Shawa","","ShaBaMa");
catch (SQLException ex) {
System.out.println("openDatabaseConnection: SQLException: " + ex.getMessage());
System.out.println("openDatabaseConnection: SQLState: " + ex.getSQLState());
System.out.println("openDatabaseConnection: VendorError: " + ex.getErrorCode());
}The code for updating an integer field (wich is working!) is like this:
public Customer cashCustomer(Customer aCustomer){
PreparedStatement pstmt;
ResultSet result;
try{
openDatabaseConnection();
pstmt = theDatabaseConnection.prepareStatement("UPDATE customer SET aantal_bier = aantal_bier + ?, aantal_fris = aantal_fris + ? WHERE id=?");
pstmt.setInt(1, aCustomer.getCashBeer());
pstmt.setInt(2, aCustomer.getCashSoda());
pstmt.setInt(3, aCustomer.getId());
theDatabaseConnection.setAutoCommit(false);
pstmt.executeUpdate();
theDatabaseConnection.commit();
pstmt.close();
theDatabaseConnection.close();
catch (SQLException eSql){
System.out.println("Cash Customer: " + eSql.toString());
System.out.println("Cash Customer: SQLException: " + eSql.getMessage());
System.out.println("Cash Customer: SQLState: " + eSql.getSQLState());
System.out.println("Cash Customer: VendorError: " + eSql.getErrorCode());
return aCustomer;
}Now the code for updating Varchar/text fields (wich is not working):
public Customer editCustomer(Customer aCustomer){
PreparedStatement pstmt;
ResultSet result;
try{
openDatabaseConnection();
pstmt = theDatabaseConnection.prepareStatement("UPDATE customer SET name=? , lastname=?, onderdeel=?, aantal_bier=?, aantal_fris=?, op_kaart=? WHERE id=?");
pstmt.setString(1, aCustomer.getName());
pstmt.setString(2, aCustomer.getLastname());
pstmt.setString(3, aCustomer.getSection());
pstmt.setInt(4, aCustomer.getBeer());
pstmt.setInt(5, aCustomer.getSoda());
pstmt.setInt(6, aCustomer.getId());
pstmt.setString(7, aCustomer.getAddCash());
theDatabaseConnection.setAutoCommit(false);
pstmt.executeUpdate();
theDatabaseConnection.commit();
pstmt.close();
theDatabaseConnection.close();
catch (SQLException eSql){
System.out.println("Updating Customer: " + eSql.toString());
System.out.println("Updating Customer: SQLException: " + eSql.getMessage());
System.out.println("Updating Customer: SQLState: " + eSql.getSQLState());
System.out.println("Updating Customer: VendorError: " + eSql.getErrorCode());
return aCustomer;
}I can add and delete from the database. The thing with the ' ' didn't work for me too.
Anybody a solution for me??? plz plz plz!You are updating zero records. Because you are filling in the parameter ofWHERE id=?with this code:pstmt.setString(7, aCustomer.getAddCash());The executeUpdate() method returns the number of records affected, if you wish to check that.
Maybe you are looking for
-
How can I set the phone to request the passcode after being turned off
My old phone had this feature..I wonder if it exists for the iPhone 4 S Thanks
-
Hi, Through my PL/SQL code for Download To Excel functionality, If fetch record count is more than 2k then sometime I get below mentioned error: ORA-22288: file or LOB operation FILEOPEN failed No such file or directory ORA-06512: at "SYS.DBMS_LOB",
-
Apple isn't accepting my credit card and its valid. why
I just updated my credit card and apple is saying that my payment method has been decline but I have plenty of money on my credit card. Help
-
Where is the iPhoto Slideshow Rate and Delete feature?
A very useful feature in iPhoto has always been the ability to play photos on full size screen, and give them a star rating, rotate them or delete them as the slideshow progresses. It seems this very useful function is missing in iPhoto 9, or am I ju
-
Connect AirPort Extreme to my FritzBox internet router
How can I connect the AirPort Extreme to my FritzBox Router ? I bought the AirPort extreme to get a better receiption in the back area of my appartment. Do I have to connect the AirPort Extreme to my normal router at all ?