Problems with Just installed Weblogic..

Hi,
I have just installed Weblogic, however i have some problems..
$BEA_HOME/wlserver_10.3/samples/domains/wl_server/bin/startWebLogic.sh
It gives some errors on startup, but it starts and i can successfully navigate to:
http://192.168.1.4:7001/index.jsp
The problem starts here when i start administration control, it deploys administration console i think:
Deploying application for /console.....
i type username and password, then click "Log In".
Then it loads... loads.. and loads.... Nothing else, it does not redirect me next page..
But sometimes it redirects me to next page (i mean i can log in) but when i do any new action after a while, it agains does not reply.
I think the problem raises because of error logs..
Logs are:
<Aug 22, 2008 4:44:11 PM EEST> <Error> <JMS> <BEA-040123> <Failed to start JMS Server "examplesJMSServer" due to weblogic.management.DeploymentException: Cannot find or create JMS message log file for JMS server examplesJMSServer.
weblogic.management.DeploymentException: Cannot find or create JMS message log file for JMS server examplesJMSServer
at weblogic.jms.deployer.BEAdminHandler.findJMSMessageLogger(BEAdminHandler.java:360)
at weblogic.jms.deployer.BEAdminHandler.activate(BEAdminHandler.java:194)
at weblogic.management.utils.GenericManagedService.activateDeployment(GenericManagedService.java:239)
at weblogic.management.utils.GenericServiceManager.activateDeployment(GenericServiceManager.java:131)
at weblogic.management.internal.DeploymentHandlerHome.invokeHandlers(DeploymentHandlerHome.java:591)
Truncated. see log file for complete stacktrace
java.io.FileNotFoundException: /home/oracle/bea/wlserver_10.3/samples/domains/wl_server/servers/examplesServer/logs/jmsServers/examplesJMSServer/jms.messages.log (Permission denied)
Thanks

Here are the outputs:
% uname -a:
Linux localhost.localdomain 2.6.18-1.2747.el5xen #1 SMP Thu Nov 9 19:33:10 EST 2006 i686 i686 i386 GNU/Linux
% ls -lt /home/oracle/bea/wlserver_10.3/samples/domains/wl_server/servers/examplesServer/logs/jmsServers/examplesJMSServer/ :
-rwxrwxrwx 1 oracle root 0 Aug 22 02:18 jms.messages.log
% ps -elf | grep weblogic.Server
0 R oracle 14981 14862 0 78 0 - 974 - 19:48 pts/1 00:00:00 grep weblogic.Server

Similar Messages

Problems with IIS and Weblogic 6.0 Redirecting thru IIS

Hi
I have just installed Welblogic 6.0 and I am having problems with the configuration
of the ISAPI Plugin.
I created the iisproxy.ini file and then copied that into wlserver6.0/bin directory
and copied the iisproxy.dll file into the inetpub/wwroot directory for iis to
see
Now when I type in my url, I get the default index.jsp page that bea supplied
but when I try to go to the Admin tool, existing portals created or new portals
added, I get the following error
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.5 404 Not Found
Can any one help, here is my iisproxy.ini file
below
#This file contains initialization name/value pairs
#for the IIS/weblogic plug-in
WebLogicHost=localhost
WebLogicPort=7501
WlFowardPath=/weblogic
SecureProxy=OFF
PathTrim=/weblogic
ConnectTimeoutSecs=20
ConnectRetrySecs=2
Bola

Seems 6.0 has more than a few proxy problems. We are running IPlanet and have
had no success in running the 6.0 proxy.
FYI. We have started using the 5.1 proxy in 6.0 successfully; you might give
it a try. Not sure we want to put this in production in this condition however.
Matt Raible wrote:
Has anyone been successfully able to get the IIS Proxy working with WLS 6.0
on Win2K? I've been trying for days, working with a support engineer at BEA
and everything, but no luck.
Thanks,
Matt

I'm having problems with the install of iTunes 10.7 it seems to be going well and then at the very end of the blue bar it doesnt seem to complete? All of my software is up to date and plenty of space on the mini?

I'm having problems installing iTunes 10.7. It seems to be going well and then at the last part of the blue bar it just doesn't complete. All software is up to date and there is plen of room on the mini? I have tried like 4 times and am ready to throw it out the window.

I noticed some problems with the Apple Support sites here the last day or so.
Try again using > Apple - iTunes - Download iTunes Now

TTY problems with fresh install

HP Compaq 8510W
Fresh install of 32-bit Arch
I have had 64-bit Arch running on this laptop without incident---until the last upgrade broke Flash..:( (But that's another story.....)
Now, I have just installed 32-bit Arch and--after doing some setup and configuring--the TTYs quit working. Ctrl-Alt-F1, F2, etc. produces only a brightly-colored screen with random letters and numbers. A re-install cured it, but only for a short while.
The symptoms suggest an issue with a video driver, but I don't know what driver is used when toggling to a TTY.
As I write this, I am running from Ubuntu, and all is well.
Any ideas??

Hello Neighbor,
Are you encountering these problems after starting an X session when you try to switch back to a console, or does this happen in the absence of Xorg?
What is your video architecture in that HP? My Pavilion is Intel GM45 (intel915). These types of problems went away for me about a year ago. On Intel, if I recall correctly, it was imperative that you not load any framebuffer console mode kernel drivers in the presence of KMS. The only module that can be loaded is the KMS Intel frame buffer support module.
You might check the modules you are forcing, and you might play with disabling KMS from the kernel command line.
I am in Northeast Pasadena (Brigden Ranch area). Are you anywhere close?

Problems with re-installing OS X

Hi,
I have recently had some problems with my iBook G4, it ran very slow and I could hear the Hard Drive constantly spinning. So I think about doing a fresh install of OSX to see if that would solve the problem, so I went to the apple support and saw that it would work if I followed the installation. Everything was working well. in the installation, I erased everything on the hard drive (I did have everything backed up...) and started the installation. (Just let me say here that I have 4 CDs that came with my iBook to install panther and it also came with a dvd to upgrade to tiger [I bought the day they relesed tiger]) on both installation disks once I satrted installing it said "there were errors installing this software please try again" I had tried many times again. and nothing has happened since.
Does anybody think they could give me a hand? it would be greatly appreciated. Thanks in advance!

Try this:
1. Boot from your Panther Installer Disk. After the installer loads select Disk Utility from the Installer menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled, if supported.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled, if supported.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process will take 30 minutes to an hour or more depending upon the drive size.
7. Once the formatting has completed quit DU to return to the installer. Proceed with the installation of Panther.

Problems with Nforce4 install - audio/ethernet/raid

Just installed my Neo4 Platinum Nforce4 with XP Home SP2. I have a problem with the drivers. I went to the Nvidia site and download both the Unified Drivers and the standalone Kit for XP.
The unified driver set didn't seem to do anything at all, it seemed to quit half way through the install without giving me any finished message. A quick look in device manager and I saw about seven items with yellow warnings!
I then tried the standalone kit which worked better, however after the install I am still left with 3 items in device manager that are giving me warnings. Multimedia Audio Controller, Ethernet Controll & Serial ATA RAID controller. I have no audio at all, I just the BIOS is all is OK, as it is for everything else. In the sound section of control panel there is no audio hardware available.
Can anyone help please? I dunno what I could have done wrong. It's a fresh install.

I have now done eveything you've said. I installed the Nforce drivers off the CD, and then installed Realtek, Ethernet & RAID via Live update. I also tried to do the NVMixer & Nvidia Audio install install. I installed realtek from the add/remove software menu. I then went into add new hardware and did manual install, show all hardware, have disk. Then I browsed to the Nvidia Audio codec folder on my desktop that I download. I was given an option of two drivers "nvmcp" & "nvmpu". I picked the first and ended up choosed "Nvidia audio codec interface" which then installed. It then appeared in device manager. However, when I clicked the audio panel in control panel I still get no audio device installed? I then tried to install NVMixer and when I try to run the application I get this message:
"the application cannot start because it could not detect any NVIDIA Nforce hardware on your system...."
What am I doing wrong? When I did the driver install there were two things listed in each driver "nvidia audio codec interface" and also "nvidia audio processing unit", which should I be choosing? Even if I try and installed the "MVP audio processing unit" I'll get a code(10) device cannot start in device manager. This is kinda confusing.
I also wondered about the RAID controller software. The silicon image drivers that came on the MSI seem horrible, they installed Java too. Is there any way to disable this controller? In the BIOS I can only see one option to enable RAID and when this is enabled device mananger will show an error on an "unknown device". I assume this is the NVRaid? and speaking of NVraid which is mentioned in big fat type on the back of the MSI box, so far I've seen or heard none of it during this installtion?

MSI Z87m problems with Realtek install

I cannot install Realtek drivers with this motherboard. Brand-new system with Windows 7. Intel I5 CPU, gigabyte gtx 780, 8 GB ram. All drivers updated, win 7 updated.
I have tried the drivers from the included disc and also direct from Realtek site. They will install but they will not work. Red Cross shows up on the volume icon anytime I try to open audio.
I have even tried reinstalling the OS twice. Makes no difference.
I tried installing the Realtek drivers from SafeBoot. I just get an error message.
Creative Sound Blaster cinema will also not work because the RealTek drivers don't work.
I have read a few other posts of people having this exact same problem with this motherboard and Realtek drivers.
The windows HD audio will work.
Right clicking on Realtek properties in device manager shows everything is working fine, even though it isn't.
I have also had problems when booting into the bios. If I try to change anything, like a fan setting, and then try to save and exit, the system freezes. I had to CMOS once already. Pc also freezes in the bios when trying to access the hardware Monitor option, requiring a reboot. The other options work fine.
I've written to MSI about this problem but I was hoping somebody might have an idea of what I could try before I take the system back to the store for them to check it and replace the motherboard, as I will then be without the PC for a week.

What xmad is trying to get as information is the 'complete' name of the mainboard. Z87m is not good enough. Also, more information about the other systems components including specifics of the RAM, brand, rated speed, and the PSU brand and description. For now, test with just a single RAM stick.

Metalink SR category for problem with CRS install

HI
Can You please tell me , where I find in SR category to create request on metaling about problem with install/start crs :
I wont to create RAC env where host is ORACLE VM and clusterware is OCFS2 and wit Oracle Enterprise linux 5 , but after istal ai have problem with start crs (root.sh) and I don't know to find relevant category
[root@lin1 bin]# ./crsctl start cluster
CRS-2672: Attempting to start 'ora.gipcd' on 'lin1'
CRS-2672: Attempting to start 'ora.mdnsd' on 'lin1'
CRS-2676: Start of 'ora.mdnsd' on 'lin1' succeeded
CRS-2676: Start of 'ora.gipcd' on 'lin1' succeeded
CRS-2672: Attempting to start 'ora.gpnpd' on 'lin1'
CRS-2676: Start of 'ora.gpnpd' on 'lin1' succeeded
CRS-2672: Attempting to start 'ora.cssdmonitor' on 'lin1'
CRS-2676: Start of 'ora.cssdmonitor' on 'lin1' succeeded
CRS-2672: Attempting to start 'ora.cssd' on 'lin1'
CRS-2672: Attempting to start 'ora.diskmon' on 'lin1'
CRS-2676: Start of 'ora.diskmon' on 'lin1' succeeded
CRS-2674: Start of 'ora.cssd' on 'lin1' failed
CRS-679: Attempting to clean 'ora.cssd' on 'lin1'
CRS-2681: Clean of 'ora.cssd' on 'lin1' succeeded
CRS-2672: Attempting to start 'ora.cssdmonitor' on 'lin1'
CRS-2676: Start of 'ora.cssdmonitor' on 'lin1' succeeded
CRS-2672: Attempting to start 'ora.cssd' on 'lin1'
CRS-2674: Start of 'ora.cssd' on 'lin1' failed
CRS-2679: Attempting to clean 'ora.cssd' on 'lin1'
CRS-2681: Clean of 'ora.cssd' on 'lin1' succeeded
CRS-2672: Attempting to start 'ora.diskmon' on 'lin1'
CRS-2676: Start of 'ora.diskmon' on 'lin1' succeeded
CRS-2673: Attempting to stop 'ora.cssdmonitor' on 'lin1'
CRS-2677: Stop of 'ora.cssdmonitor' on 'lin1' succeeded
CRS-4000: Command Start failed, or completed with errors.
[root@lin1 bin]# ./crsctl check cluster
CRS-4535: Cannot communicate with Cluster Ready Services
CRS-4530: Communications failure contacting Cluster Synchronization Services daemon
CRS-4534: Cannot communicate with Event Manager
[root@lin1 bin]# ./crsctl check cluster -all
lin1:
CRS-4535: Cannot communicate with Cluster Ready Services
CRS-4530: Communications failure contacting Cluster Synchronization Services daemon
CRS-4534: Cannot communicate with Event Manager
Thank You Brano

HI
Can You please tell me , where I find in SR category to create request on metaling about problem with install/start crs :
I wont to create RAC env where host is ORACLE VM and clusterware is OCFS2 and wit Oracle Enterprise linux 5 , but after istal ai have problem with start crs (root.sh) and I don't know to find relevant category
[root@lin1 bin]# ./crsctl start cluster
CRS-2672: Attempting to start 'ora.gipcd' on 'lin1'
CRS-2672: Attempting to start 'ora.mdnsd' on 'lin1'
CRS-2676: Start of 'ora.mdnsd' on 'lin1' succeeded
CRS-2676: Start of 'ora.gipcd' on 'lin1' succeeded
CRS-2672: Attempting to start 'ora.gpnpd' on 'lin1'
CRS-2676: Start of 'ora.gpnpd' on 'lin1' succeeded
CRS-2672: Attempting to start 'ora.cssdmonitor' on 'lin1'
CRS-2676: Start of 'ora.cssdmonitor' on 'lin1' succeeded
CRS-2672: Attempting to start 'ora.cssd' on 'lin1'
CRS-2672: Attempting to start 'ora.diskmon' on 'lin1'
CRS-2676: Start of 'ora.diskmon' on 'lin1' succeeded
CRS-2674: Start of 'ora.cssd' on 'lin1' failed
CRS-679: Attempting to clean 'ora.cssd' on 'lin1'
CRS-2681: Clean of 'ora.cssd' on 'lin1' succeeded
CRS-2672: Attempting to start 'ora.cssdmonitor' on 'lin1'
CRS-2676: Start of 'ora.cssdmonitor' on 'lin1' succeeded
CRS-2672: Attempting to start 'ora.cssd' on 'lin1'
CRS-2674: Start of 'ora.cssd' on 'lin1' failed
CRS-2679: Attempting to clean 'ora.cssd' on 'lin1'
CRS-2681: Clean of 'ora.cssd' on 'lin1' succeeded
CRS-2672: Attempting to start 'ora.diskmon' on 'lin1'
CRS-2676: Start of 'ora.diskmon' on 'lin1' succeeded
CRS-2673: Attempting to stop 'ora.cssdmonitor' on 'lin1'
CRS-2677: Stop of 'ora.cssdmonitor' on 'lin1' succeeded
CRS-4000: Command Start failed, or completed with errors.
[root@lin1 bin]# ./crsctl check cluster
CRS-4535: Cannot communicate with Cluster Ready Services
CRS-4530: Communications failure contacting Cluster Synchronization Services daemon
CRS-4534: Cannot communicate with Event Manager
[root@lin1 bin]# ./crsctl check cluster -all
lin1:
CRS-4535: Cannot communicate with Cluster Ready Services
CRS-4530: Communications failure contacting Cluster Synchronization Services daemon
CRS-4534: Cannot communicate with Event Manager
Thank You Brano

Problems with Requests in Weblogic 6.1

Hi,
i am using weblogic in my project both as a webserver and as the application server.
But i am facing problems with requests being sent to the server. Basically i have
a form in my jsp which, if submitted by multiple clients at the same instant in
time, the server gets confused and mixes up the data in the requests !! the form
is submitted to another jsp which in turn calls a SLSB which in turn calls various
entity Beans to fulfill the request.
Now if 2 or more clients hit the submit button together, the server is mixing
the data from the requestsand i get corrupted output as a result.
That if i submit values (a,b,c) from one client machine and values (x,y,z) from
another machine, the server puts one of the transactions properly and in the other
it picks up the data from the other request and takes something like (x,y,c) !!
Is this a bug in Weblogic 6.1 or am doing something wrong ??
Any help would be appreciated.
Raja

Make sure your JSP scope is set correctly:
<jsp:useBean id="beanName" scope="session" class="abc.BeanClass" />
"Raja" <[email protected]> wrote in message
news:3c6abfc8$[email protected]..
>
Hi,
i am using weblogic in my project both as a webserver and as theapplication server.
But i am facing problems with requests being sent to the server. Basicallyi have
a form in my jsp which, if submitted by multiple clients at the sameinstant in
time, the server gets confused and mixes up the data in the requests !!the form
is submitted to another jsp which in turn calls a SLSB which in turn callsvarious
entity Beans to fulfill the request.
Now if 2 or more clients hit the submit button together, the server ismixing
the data from the requestsand i get corrupted output as a result.
That if i submit values (a,b,c) from one client machine and values (x,y,z)from
another machine, the server puts one of the transactions properly and inthe other
it picks up the data from the other request and takes something like(x,y,c) !!
Is this a bug in Weblogic 6.1 or am doing something wrong ??
Any help would be appreciated.
Raja

Problems with new instalation of Photoshop Elements 12

Windows 7
I have had continual problems with PE 9 with error messages to uninstall and reinstall Error 16.
So I thought buy version 12 that should do the trick BUT NO I uninstalled version 9 and installed 12 from disk on the 20th August.
Updated with Application Manager and all was well. Yesterday will not load and Error 16 as before. Tried run as administrator and was told I needed a newer version of Update Manager. Downloaded and installed version 8 still no joy and this then updated to Adobe Creative Cloud. The Application still will not open and I am getting fed up with Adobe applications, when they work their fine but I have no luck getting them to work long term.
Having bought this I am reluctant to move on and incur the cost of an alternative but I am fast running out of patience with Adobe
Any Hep Would Be Appreciated

Barbara B
Thanks for link. Worked through Windows Vista/7 settings got to Set permissions but no Adobe PCD folder. Uninstalled and reinstalled PE 12 software 5/9, PCD now there and application running OK as was the initial installation.
6/9 on start-up, Creative Cloud identified update for PE 12, Application Manager appeared and I run update, after, application running OK and Adobe PCD still there. Checked settings and permissions against link document permissions not as suggested but application working so made no changes.Will the application continue to work, that’s the next question, from previous experience with the initial installation and with PE 9, I have my doubts.
If the loss of Adobe PCD is the cause of the problem, what makes it disappear ?
Les

Problems with Tiger Install

Previously having OS 10.2, I tried to install 10.4 from an installation disc over 10.2, and it failed to install. After failing to install, the computer made me restart, and now it goes to a screen giving an error about a Mac OS 10.4 and 10.5 Driver. The Computer can't find drivers for 10.4 and 10.5. I cannot boot from an Apple I-care disc, the machine tries to boot into an OS, but there is a question mark, instead of an OS Icon in the middle of the screen, and then shortly after comes the error message. The machine locks up.
I thought maybee the problem was intalling OS10.4 as an update, because there was a gap between version previously installed and the new one, but the installation guide says OS 10.2 or later is updatable.
Please Help.

Hi Brandon,
If you are not able to start up from your installation DVD there might be a problem with your DVD drive.
If this is the case then there are two things you might do:
1- (and most obvious) take your Mac in for repair.
2- Fire Wire Target Disk Mode... (For this option you will need a second Mac)
- Target Disk Mode will basically turn your iMac into an external HD, by doing this you will be able to use a second Mac with a working disc drive to start up from the Tiger DVD and then install it on your iMac.
If you are going to do this it is important that no other FireWire devices are connected to either of the computers.
How to start your iMac in Target Disk Mode: Start up the computer and immediately press and hold down the T key until the FireWire icon appears.
Once you have done this connect it to the second Mac (with FireWire)
Now insert the Tiger DVD in the second Mac, when the disk appears on the Desktop open it and double click on "install"
A window with a restart button will appear... click and restart (there will be no need to hold the "c" key.
Once the computer has started up from the Tiger DVD you need to find UTILITIES or TOOLS (i can remember the exact name) on the top bar
Click on it and open Disk Utility then follow the steps of my previous post.
Make sure that you have selected the correct HD to erase and install (it will not be the first one on the list)
Good Luck.
S

[SOLVED] Problem with net install cd

Trying to install Arch on an old Asus P4BGL-MX board which is proprietary, probably something HP. I have had no problems using the net install CD on 3 other Asus boards. What happens is the install process starts (booting the kernel) and then halts with the screen black and the computer hung.
The last line before black screen is: [13.34178412] ACPI: Invalid PBLK length [5]
==>> I think problem solved, but I don't understand it. The board has on board Intel graphics, but I had an ATI PCI card installed with bios set for it. Took it out and now the install goes as it should. I'm marking this post as solved, but if anyone could shed some light on this, it would be appreciated.
Last edited by Ron74 (2012-01-02 19:46:25)

This says:
Colin King wrote:The warning is because of a problem with the Processor declaration in the _PR root namespace of your ACPI DSDT:
Scope (\_PR)
Processor (\_PR.CPU0, 0x00, 0x0000E410, 0x05) {}
Processor (\_PR.CPU1, 0x01, 0x00000000, 0x00) {}
The syntax of the Processor declaration is as follows:
Processor (ProcessorName, ProcessorID, PBlockAddress, PblockLength)
Section 18.5.93 of the ACPI specification states that the PBlockLength is the length of the processor register block, in bytes and is either 0 (for no P_BLK) or 6. In your case, the it's been set to 0x05 in the first Processor declaration which is definetly not compliant with the specification, hence the kernel warning message. The ACPI specification can be downloaded from http://www.acpi.info/DOWNLOADS/ACPIspec40.pdf if your are interested in the details.
As it is, this is not a kernel bug, but a warning from the kernel that your BIOS is buggy and needs fixing. I suggest informing the manufacturer so that they can fix the BIOS.

Is there a problem with JMS and Weblogic?

          Hi,
          I am using JMS and Weblogic (Not Message Driven bean).
          My problem is that after some time my listeners disappears.
          I am sending them a message and instead of 6 listeners
          I get only 4 messages.
          So, My question is: Is there any problem working with JMS
          and Weblogic???
          Thanks,
          Tal.


Too little information and a very vague question. Need more info.
          "Tal" <[email protected]> wrote in message
          news:[email protected]..
          >
          > Hi,
          > I am using JMS and Weblogic (Not Message Driven bean).
          > My problem is that after some time my listeners disappears.
          > I am sending them a message and instead of 6 listeners
          > I get only 4 messages.
          > So, My question is: Is there any problem working with JMS
          > and Weblogic???
          > Thanks,
          > Tal.

Upgrading from OSX 10.58 to 10.6 - any problems with previously installed software anyone?

I was wondering if anyone had had any problems with their current software after installing 10.6? (I'm asking because I have a substantial investment in the Adobe Creative Suites and don't want to lose it.) Has anyone had any problems after installing 10.6? Thank you in advance for any replies.

I would check the Adobe web site to see if it will be compatible. If there is an issue you may consider a partitioned HDD and run the two OSs each on separate partitions.
Ciao.

I have problems with iTunes install.

There are many discussions about installing iTunes 10.5, but I have another problem.
First, I can't install iTunes because in finish of installing Apple Software Update there is a 'problem with Windows Installer'.
I tried to reinstall Windows Installer, to restore Windows with the installation disc, to reboot my computer, to check files, but it don't solve my problem.
I found some installed Apple components: Apple Mobile Device Service, Apple Application Support, and Apple Software Update. I was successfully uninstalled first two components (AMDS and AAS) but I can't uninstall Apple Software Update - if I want to reinstall or uninstall it there is an 'No access to Windows Installer' and I can't fix this problem with those methods.
What I can do now? I really don't want to reinstall Windows.
P.S. Sorry for bad English.

This post might help you: https://discussions.apple.com/message/18007791#18007791
Otherwise search for other posts by b noir - he is our resident expert on Windows Installer issues.
tt2

Problems with Just installed Weblogic..

Similar Messages

Maybe you are looking for