Problems with Key board and mouse

Ok, right now I have my mouse connected through my keyboard. And A: My mouse scroll button won't scroll down anymore. There use to be an audible clicking when it did, and now it doesn't even make that click.
But the annoying thing is the keyboard. Every so often (sometimes more frequently than I'd like to deal with) my keyboard goes batty and decides it's going to act like it's holding down the enter key and won't stop. It makes posting blogs and etc very difficult. because I have to spend time correcting it, at which point it starts to do it again. Has anyone else experienced this, an/or found a way to fix it?

I have this problem occasionally.
Sometimes something as simple as using a different USB port helps.
best wishes
David
go zags

Similar Messages

  • Installed new hard drive in imac and i get folder with question mark, put in OS install disk and it does nothing? All I have is wireless key board and mouse, is this a factor?

    Installed new hard drive in imac and i get folder with question mark, put in OS install disk and it does nothing? All I have is wireless key board and mouse, is this an issue?

    Other than put disc in you don't give much info about what you've done. With the install disc inserted restart your Mac while holding the C key, that should start it up from the install disc. Should also work fine with a wireless Apple keyboard.

  • Dell 1950 power-edge III gen, key board and mouse stop after reboot using F1 key--Red hat 6.0

    I am trying to install OS (Red hat 6.0) in Dell 1950 power-edge III gen, After booting CD i got option to hit F1 to install or let is continue to start the installation process. now screen goes to next step and key board and mouse stop working .  it stop me from   further step. Please help 
    Sam

    Try booting to our live image and see if that lets you use the mouse and keyboard. http://linux.dell.com/files/openmanage-contributions/omsa-71-live/

  • Pairind an apple Key board and mouse from my Mac pro G5 to a newer Intel Xeon. Have OS 10.6.8 with all updates for Bluetooth. Still no luck setting up as new divice. Help.. Thanks Out There...

    I have an wireless Apple Keyboard and Mouse from my G5 Pro Mac, 2006. I would like to use it on a newer Intel xeon with blue tooth. Initally I was able to set them up.. Today Is another story. I have delete them as devices and have had no luck setting them up.. Help.. Many Thanks folks I am sure one of you good souls can help me out.. I have loaded the updates and am running 10.6.8. Are there issues using early apple wireless keyboards and a mouse.

    I have an wireless Apple Keyboard and Mouse from my G5 Pro Mac, 2006. I would like to use it on a newer Intel xeon with blue tooth. Initally I was able to set them up.. Today Is another story. I have delete them as devices and have had no luck setting them up.. Help.. Many Thanks folks I am sure one of you good souls can help me out.. I have loaded the updates and am running 10.6.8. Are there issues using early apple wireless keyboards and a mouse.

  • Discoverable key board and mouse

    Hello,
    My new computer starts the day unable to find mouse or key board.
    I find it to be a stupid computer, every time I
    check my email on my website it says the site is unknown and has no security, I asked the web hosting company and it says Mac has a problem, not them.
    I don't really care if Mac routes everything through various national spy agencies but I would like to avoid plugging and unplugging the mouse and keyboard several times per day.
    Thanks
    Garrett

    I have discovered a detail which may be helpful.
    1) I plugged the mouse into a usb port on the computer and it always works.
    2) With this expanded ability I can force quite the searching for a wireless keyboard set up window.
    Then everything is okay.
    Garrett
    PS > Just closing the window does not do it, a restart is required before doing #2, this is of course easy with a functioning mouse.

  • Key board and mouse don't function, key board and mouse don't function

    my laptop does not respond to the mouse or key board , i dont know how to solve my problem.If anyone knows hot to fix it let me know.It fuctions when i put a usb keyboard and mouse...

    I´m having the same problem. The mouse is the most problematic issue. The keyboar fails after working a while. The mouse sometimes loks up after a while, sometimes, it starts locked Up. I´ve tried to use a mouse driver under DOS, but it sometimes works, sometimes not (tried changing the mouse of course, same thing).
    MSI K7N2 Delta-L
    AMD 2600+Barton
    Ati radeon 9600Pro
    1x 256MB DDR 333 (dont have the brand)
    Western Digital Caviar 80 GB
    DVD AOPEN
    DVD RW ASUS
    PSU Unknown
    standar  five years old  keyboard
    A4 tech trackball

  • Problems with key board events

    hi, i am experiencing some key board events, in this project iam suppose to make the sphere/earth move left,right,up,down with left,right,up,down arrow.
    can you please tell me if i have make any mistakes in my coding????
    package
        import flash.display.Sprite;
        import flash.events.Event;
        import flash.events.KeyboardEvent;
        import flash.ui.Keyboard;
        import org.papervision3d.materials.BitmapFileMaterial;
        import org.papervision3d.objects.primitives.Sphere;
        import org.papervision3d.view.BasicView;
        [SWF (width="800", height="600", backgroundColor="0x000000",frameRate="30")]
        public class InteractiveEarth extends BasicView
            private var sphere:Sphere;
            public function InteractiveEarth()
                super(800 , 600);
                var earthmaterial:BitmapFileMaterial = new BitmapFileMaterial("../assets/Earth.jpg");
                sphere = new Sphere(earthmaterial,100,20,18);
                camera.fov = 25;
                scene.addChild(sphere);
            addEventListener(Event.ENTER_FRAME,rotateSphere);
            addEventListener(KeyboardEvent.KEY_DOWN, downEarth);
           // stage.addEventListener(KeyboardEvent.KEY_UP, upEarth);
            public function rotateSphere(evt:Event):void
                sphere.yaw(0.2);
                singleRender();
            public function downEarth(event:KeyboardEvent):void
                switch(event.keyCode)
                    case Keyboard.DOWN:
                        sphere.y += 5;
                        break;
                    case Keyboard.UP:
                        sphere.y -= 5;
                    break;
                    case Keyboard.LEFT:
                    sphere.x += 5;
                    break;
                    case Keyboard.RIGHT:
                    sphere.x -= 5;
                    break;

    You haven't said what the problem is.
    If your keyboard event handlers are not being called, perhaps you need to add the event listeners to some other object.
    If this post answers your question or helps, please mark it as such. Thanks!
    http://www.chikaradev.com
    Adobe Flex Development and Support Services

  • Serious problem with xorg - keyboard and mouse locks all the time.

    In the last week I've notices serious problems with xorg.
    After some event, I am not sure which one, keyboard stops responding.
    Mouse cursor works, but I can't click on anything.
    I can't switch to text console.
    But I can kill xorg with CTRL+ALT+BACKSPACE.
    Have you noticed something similiar?
    I use xfce4, [testing] repository.

    Jacek Poplawski wrote:
    In the last week I've notices serious problems with xorg.
    After some event, I am not sure which one, keyboard stops responding.
    Mouse cursor works, but I can't click on anything.
    I can't switch to text console.
    But I can kill xorg with CTRL+ALT+BACKSPACE.
    Have you noticed something similiar?
    I use xfce4, [testing] repository.
    I had that a few days ago, couldn't reproduce it. I was also running xfce4. I havn't had it today and im running xfdesktop+xfce-mcs-manager+pekwm+xfce4-panel... so it may have been xfwm4.
    James

  • SOLVED Key board and mouse fail after last update

    Both my wireless keyboard and mouse failed after I updated yesterday. I'm using KNOPPIX to post they both work with knoppix so its not a hardware problem.
    KDE 4.1
    Logitech keyboard and mouse
    Last edited by normc (2008-11-08 00:05:37)

    Thanks a lot
    Just want to add that I had to edit grub at start up and add "single" at the end of the kernel line.
    The reason is that switching to runlevel 3 didn't work for me.

  • Problem with MSI Board and MSI Geforce 4 with Windows XP

    I have a MSI 845E Max(MS-6566E)
                  MSI Geforce 4 - 420
                  Celeron 1.7 gig
                  Soundblaster Live
                  2 Network Cards
                  and the usual stuff.
    I have loaded Windows 98 on my system and it works fine. But then I load Windows XP on and the system starts rebooting. After it reboots my video resets itself and I have to load it back in. I will then reboot and sometimes it will work, sometimes it will not. I try playing a game or even searching the net for awhile, but out of the blue the system will give a very quick blue screen and reboot. And of course when it boots up the video is reset. I loaded all the drivers I could find on MSI's website and used every video driver made by Nvidia and MSI. If I do a Windows XP update to my system the computer will not even boot up. it will just keep rebooting when it is trying to bring up the login screen.  Anyone else run into this with Windows XP?

    My system sometime freezes. Why ???
    P4 1.8A GHz Notrtwood, 256MB PC2700, MSI Geforce 4 TI4400, SB Live 1024
    Check my logs:
    1)
    // Watchdog Event Log File
    LogType: Watchdog
    Created: 2002-07-23 20:03:27
    TimeZone: -60 - Central Europe Standard Time
    WindowsVersion: XP
    EventType: 0xEA - Thread Stuck in Device Driver
    // The driver for the display device got stuck in an infinite loop. This
    // usually indicates a problem with the device itself or with the device
    // driver programming the hardware incorrectly. Please check with your
    // display device vendor for any driver updates.
    ShutdownCount: 108
    Shutdown: 0
    EventFlag: 1
    EventCount: 1
    BreakCount: 1
    BugcheckTriggered: 1
    DebuggerNotPresent: 1
    DriverName: nv4_disp
    DeviceClass: Display
    DeviceDescription: NVIDIA GeForce4 Ti 4400
    HardwareID: PCIVEN_10DE&DEV_0251&SUBSYS_87111462&REV_A3
    Manufacturer: NVIDIA
    DriverFixedFileInfo: FEEF04BD 00010000 0006000D 000A0BD6 0006000D 000A0BD6 0000003F 00000008 00040004 00000003 00000004 00000000 00000000
    DriverCompanyName: NVIDIA Corporation
    DriverFileDescription: NVIDIA Compatible Windows 2000 Display driver, Version 30.30
    DriverFileVersion: 6.13.10.3030
    DriverInternalName: nv_disp.dll
    DriverLegalCopyright: (c) NVIDIA Corporation. All rights reserved.
    DriverOriginalFilename: nv_disp.dll
    DriverProductName: NVIDIA Compatible Windows 2000 Display driver, Version 30.30
    DriverProductVersion: 6.13.10.3030
    2)
    // Watchdog Event Log File
    LogType: Watchdog
    Created: 2002-08-12 18:53:23
    TimeZone: -60 - Central Europe Standard Time
    WindowsVersion: XP
    EventType: 0xEA - Thread Stuck in Device Driver
    // The driver for the display device got stuck in an infinite loop. This
    // usually indicates a problem with the device itself or with the device
    // driver programming the hardware incorrectly. Please check with your
    // display device vendor for any driver updates.
    ShutdownCount: 235
    Shutdown: 0
    EventCount: 8
    BreakCount: 8
    BugcheckTriggered: 1
    DebuggerNotPresent: 1
    DriverName: nv4_disp
    EventFlag: 1
    DeviceClass: Display
    DeviceDescription: NVIDIA GeForce4 Ti 4400
    HardwareID: PCIVEN_10DE&DEV_0251&SUBSYS_87111462&REV_A3
    Manufacturer: NVIDIA
    DriverFixedFileInfo: FEEF04BD 00010000 0006000D 000A0C0A 0006000D 000A0C0A 0000003F 00000008 00040004 00000003 00000004 00000000 00000000
    DriverCompanyName: NVIDIA Corporation
    DriverFileDescription: NVIDIA Compatible Windows 2000 Display driver, Version 30.82
    DriverFileVersion: 6.13.10.3082
    DriverInternalName: nv_disp.dll
    DriverLegalCopyright: (c) NVIDIA Corporation. All rights reserved.
    DriverOriginalFilename: nv_disp.dll
    DriverProductName: NVIDIA Compatible Windows 2000 Display driver, Version 30.82
    DriverProductVersion: 6.13.10.3082
    3)
    // Watchdog Event Log File
    LogType: Watchdog
    Created: 2002-09-07 22:22:41
    TimeZone: -60 - Central Europe Standard Time
    WindowsVersion: XP
    EventType: 0xEA - Thread Stuck in Device Driver
    // The driver for the display device got stuck in an infinite loop. This
    // usually indicates a problem with the device itself or with the device
    // driver programming the hardware incorrectly. Please check with your
    // display device vendor for any driver updates.
    ShutdownCount: 408
    Shutdown: 0
    EventCount: 14
    BreakCount: 14
    BugcheckTriggered: 1
    DebuggerNotPresent: 1
    DriverName: nv4_disp
    EventFlag: 1
    DeviceClass: Display
    DeviceDescription: NVIDIA GeForce4 Ti 4400
    HardwareID: PCIVEN_10DE&DEV_0251&SUBSYS_87111462&REV_A3
    Manufacturer: NVIDIA
    DriverFixedFileInfo: FEEF04BD 00010000 0006000D 000A0FC9 0006000D 000A0FC9 0000003F 00000008 00040004 00000003 00000004 00000000 00000000
    DriverCompanyName: NVIDIA Corporation
    DriverFileDescription: NVIDIA Compatible Windows 2000 Display driver, Version 40.41
    DriverFileVersion: 6.13.10.4041
    DriverInternalName: nv_disp.dll
    DriverLegalCopyright: (C) NVIDIA Corporation. All rights reserved.
    DriverOriginalFilename: nv_disp.dll
    DriverProductName: NVIDIA Compatible Windows 2000 Display driver, Version 40.41
    DriverProductVersion: 6.13.10.4041

  • I upgraded to lion. and now I lost my bluetooth for my key board and mouse. what can i do?

    I uploaded Lion. now I lost my bluetooth. can's sink my mouse or key board. what can I do?

    You have Office 2004 or earlier, which won't work in Lion. To run Office in Lion you'll have to upgrade to the current version.

  • Serious problem with sr1901wm keyboard and mouse lock after compaq sign windows vista

    keyboard and mouse have intermittent lock up, but i can get both to work fine after many restarts new battery, power supply every thing else in on the motherboard.  sometimes the mouse works and the keyboard doesn't and the other way around, please help i am at a loss and have been doing this for many years

    Just to let you know that I found the issue. After uninstalling my antivirus software and rebooted the lappy, the problem went away. I figured out that was due to my license subscription got expired.

  • Key board and mouse deactivated after reboot

    I am new Mac user. I have rebooted my apple laptop after that keyboard and mouse pad is deactivated

    Try booting to our live image and see if that lets you use the mouse and keyboard. http://linux.dell.com/files/openmanage-contributions/omsa-71-live/

  • Not Start up, Key board and Mouse not WORKING

    I have Pavilion G7-2017us Notebook and it has Windows 7 operation system. Symptom: Start the computer, go through to the windowns log-in page, but Keyboard and mouse are frozen, not WORKING. Can't log in. 
    force Poweroff computer and use ESC, F9 can go to system diagnose page, keyboard and mouse are WORKING now. Tried "Start-up test",
    Processor Check,Memory Test, Hard Disk SMART Check are Passed. Only Hard Disk Short DST is failed. Failure ID : GLMP00-69B7NV-MFPX1G-60SJ03
    So Start-up test is FAILED. Tried "System Tune-up", Processor Check,Hard Disk SMART Check are Passed. Only Hard Disk Short DST is failed.
    Failure ID : GLMP00-69B7NV-MFPX1G-60SJ03.So System Tune-up Is FAILED. Tried "Hard Disk Test", Hard Disk SMART Check is Passed and Only Hard Disk Short DST is failed.Failure ID : GLMP00-69B7NV-MFPX1G-60SJ03.
    So Hard Disk Test Is FAILED. When I performed above test, keyboard and mouse were WORKING properly. Tried Safe mode, but can not log-in because keyboard and mouse are not working at that time. I cared about documents and was able to copy some files to external harddisk under DOS command interface. But right now I can not adjust
    this laptop back to normal DOS from safe mode log-in. When I started up it. it goes through to log-in page in Safe mode. Also F11 is not
    working because I did not make system recovery point and it can not be recoveried. Please help me for this issue. Thank you very much.

    Thank you, Visruth.    When you said the failure ID indicates failling or failed HDD, do you mean that the old HDD is bad and probably all the data on it will be lost ?    Yes, in order to salvage data from the old HDD,  I have tried to buy an external enclosure and take that harddrive out to make an external hard drive. Connect it through USB , but the new laptop can not recognize it and I can see this external hard drive shown in the device manager, but I can not see more detailed information of that drive. Click it and it asks that do you want to format that drive?      So I would like to salvage data from the old HDD. I have been able to enter into DOS command in the old laptop and copied all data on my desktop in C drive. But right now I have forced this old laptop to run into safe mode, which I think maybe I have a chance. But keyboard and mouse are still frozen at log-in page. I do not know how to get back to DOS command as I did before. If I can go back to DOS command, I may use DOS Xcopy to copy out all my data in the old HDD to new external drive. Would you please show me how to get back to DOS command from safe mode log in? I have tried F8, F9. no success.   Another way I am thinking is that to take the old HDD as an external drive, connect to a new laptop, change that new laptop's start up sequence, put the USB external drive start up as the first choice. I really do not know why my keyboard and mouse in the old laoptop do not work at some time (log-in page). Please let me know your advice. Thank you very much. 

  • Key board and mouse issues

    Every time I use the numbers on my keyboard (on the right) it doesn't work and it also freezes the mouse so i have to disconnect the mouse and restart.I have looked in settings and a few other things,I must of accidentally hit a key to initiate this,does anyone know how to fix this to have use of the numbers keyboard? also,my mighty mouse breaks so often that I had to buy a $12 one.Even though I clean it many times with alcohol,just got tired of how sensitive it is,anyone else have this problem?

    Are you sure that your hardware problem is related to this thread dedicated to the program named Pages ?
    My guess is that it would be more efficient to ask in one of the hardware related forum.
    But it's only my advice
    Yvan KOENIG (from FRANCE lundi 9 février 2009 23:00:43)

Maybe you are looking for