Problems with kEY PAD

I WAS PLAY A GAME ON FACEBOOK AND I HIT SOMETHIN ON MY KEYPAD AND THE GAME GOT VERY BIG AND I DONT KNOW WHAT I HIT OR HOW TO GET IT BACE TO NORMAL SIZE

Hi KANDY629,
I understand the screen size of your game changed and you are not sure what you did to cause this change. One thing you can try is zooming out. To do this, first click somewhere inside your Internet browser, and then hold the Control key while pressing the - (minus sign) key as many times as you need to get to the desired size; or, you can hold the Control key while scrolling down on your mouse wheel (assuming your mouse model has one). I hope this is of help to you. Best of luck. Have a wonderful day.
Ryan1216
I work on behalf of HP
The advice and opinions given here are my own and not those of HP

Similar Messages

  • Is Anyone Else Having Problems With Key Chains After Installation?

    My installation went ok but I'm having all kinds of problems with Key Chains now that I didn't before. In addition to them being corrupted, it won't let me save corrected names and passwords even when it asks for them.

    Is there a fix if you don't have your Key Chains folder from before the 10.6 installation? I keep having to re-type my MobileMe and student Gmail passwords in Mail, and if I check remember password in Key Chain, I keep having to re-type the password until I uncheck the box, but then that means I have re-type the password every time I send an email or put the computer to sleep.
    Also, Keychain Access's First Aid shows that there are no problems whatsoever. When I click on MobileMe in my System Preferences I get 8 or so consecutive errors stating "Keychain Error. There was a problem saving to your keychain. Try again or use Keychain Access to verify your keychain." When I look at my login within Keychain Access, it says my MobileMe keychain is restricted (even after entering my administrator password).

  • Problem with key Server in GETVPN

    I had a problem with my key servers in GETVPN, I could not understand well so far. My two key servers had problems with being a key issue of inspiration and had other physical problems. I have configured the OPEN and CLOSED in my understanding communication between GM should continue with the same problem with key servers, but went more than 24 hours and ended up falling all GETVPN network. My question is as follows: after the fall of the keys, primary and secondary servers in more than 24 hours while the TEK keys no longer work and the whole network goes down and it even?
    Eduardo Severo
    [email protected]

    Those fields should be on top of the view's field list. Also, the join conditions must be complete, e.g. also include MANDT, as far as I know.
    The system defines all view fields as key fields, if it cannot otherwise determine a unique key based on the join conditions and the primary keys of the joined tables.
    If that's not it, I have no further idea.
    Thomas

  • Problems with track pad and osx installation disc on macbok.

    Okay so I am having two separate problems with my macbook.
    First, the track pad, or the button beneath it, is pretty much completely out of commission. When I try and use it, the computer acts as if I am holding down the button all the time. Example, when I drag it across the desktop, the "click-and-drag" square starts appearing next to the cursor or when move the cursor on an icon, it tries to click and drag that. The only way that I can fix it thus far is to hook up my wireless mouse. Hoping someone else has a better solution so that I can continue to use the notebook on the go without having to bring the mouse. Note: the button does not appear to be depressed in anyway.
    Second problem is happening when I attempt to reboot the computer with the OS X Leopard disk in for a re-installation. When the gray start-up screen appears, before the gray apple comes on the middle of the screen, a folder icon with a question mark on it appears for a split second and then turns into the normal apple icon after which my OSX disk is spit out of the drive and the computer boots straight to the desktop. I have attempted holding down the control button, the option button, and starting the process while the computer is still turned on and then just restarting it, the disc is ejected upon restart every time. I have reinstalled the OS with this disk once before and it has worked fine and other disks seem to be working fine in the drive, so I am at a lost here.
    I know that was a lot of info but if anyone out there can help me out with either one of these problems it would be much appreciated.
    Thanks.

    exactly the same issu with the track pad here.
    I v tried to use it without the battery but the problem persist.
    If I use an USB mouse i can move it arnd but wen I click or double click nothing happen...so is useless.Same problem with the Blur Tooth wireless mouse.
    The issue appear several months ago...after a couple of weeks went away, and now is back again. I try the routine manteinance but nothing solved the issue.
    Any suggestion? I have some urgent work to do ...I will try tomorrow to bring it in an apple store but I can't leave it with them ..
    Thanx in advance

  • DateTimeAxis min/max bug? Problems with consistent padding. Date Wrapping.

    I have been working on a problem with a BarChart object that I've created using dynamic data.
    My primary issue is that I can't seem to get the proper min/max values to set for the chart.
    To solve this I manually found the min and max of the data set of Dates and set the min and max of the chart. This allowed me to finally see all the floating custom bars (each bar is rendered with a user set fill), however now if I have a bar that extends over a year change the horizontal axis labels do not wrap the date properly, so instead of 2/10 (feb 2010) being the last date, 12/09 (dec 2009) is the last date.
    I've been trying to dynamically adjust the padding based upon a change event, but so far to no avail. Partially I think because I'm not sure which event for the function to fire on.
    private function dateAxisGen(r:Array):void {
                    var min:Number = r[0].startTime.time;
                    var max:Number = r[0].endTime.time;
                    const PAD:Number = 2;
                    const MILLISEC_IN_MONTH:Number = 2629743830;
                    const MILLISEC_IN_WEEK:Number = 604800000;
                    const MILLISEC_IN_DAY:Number = 864;
                    for (var i:int = 1; i < r.length; i++) {
                        var o:OperationXT = OperationXT(r[i]);
                        min = Math.min(o.startTime.time, min);
                        max = Math.max(o.endTime.time, max);
                    // Calculates the maximum range, then adds an appropriate
                    // padding to the chart via extra time. TODO
                    /* var range:Number = max - min;
                    if(range >= MILLISEC_IN_MONTH) {
                        dAxis.padding = (MILLISEC_IN_WEEK/1000000)/PAD;
                        dAxis.padding = (MILLISEC_IN_WEEK/1000000)/PAD;
                    } else if(range >= MILLISEC_IN_WEEK) {
                        dAxis.padding = (MILLISEC_IN_DAY)/PAD;
                        dAxis.padding = (MILLISEC_IN_DAY)/PAD;
                    } else {
                        dAxis.padding = PAD;
                    dAxis.minimum = new Date(min);
                    dAxis.maximum = new Date(max);
    this, however, does not adjust the padding properly when an operation is removed from the list. Not to mention I still have the date wrapping error. It gives me the following error:
    Cannot access a property or method of a null object reference.
        at mx.charts::AxisRenderer/measureHorizontalGutters()[C:\work\flex\dmv_automation\projects\d atavisualisation\src\mx\charts\AxisRenderer.as:2244]
        at mx.charts::AxisRenderer/calcRotationAndSpacing()[C:\work\flex\dmv_automation\projects\dat avisualisation\src\mx\charts\AxisRenderer.as:1858]
        at mx.charts::AxisRenderer/adjustGutters()[C:\work\flex\dmv_automation\projects\datavisualis ation\src\mx\charts\AxisRenderer.as:1534]
        at mx.charts.chartClasses::CartesianChart/updateAxisLayout()[C:\work\flex\dmv_automation\pro jects\datavisualisation\src\mx\charts\chartClasses\CartesianChart.as:2239]
        at mx.charts.chartClasses::CartesianChart/updateDisplayList()[C:\work\flex\dmv_automation\pr ojects\datavisualisation\src\mx\charts\chartClasses\CartesianChart.as:1366]
        at mx.core::UIComponent/validateDisplayList()[E:\dev\gumbo_beta2\frameworks\projects\framewo rk\src\mx\core\UIComponent.as:8065]
        at mx.managers::LayoutManager/validateDisplayList()[E:\dev\gumbo_beta2\frameworks\projects\f ramework\src\mx\managers\LayoutManager.as:663]
        at mx.managers::LayoutManager/doPhasedInstantiation()[E:\dev\gumbo_beta2\frameworks\projects \framework\src\mx\managers\LayoutManager.as:736]
        at mx.managers::LayoutManager/doPhasedInstantiationCallback()[E:\dev\gumbo_beta2\frameworks\ projects\framework\src\mx\managers\LayoutManager.as:1069]
    Any help with my problem would be greatly appreciated.
    ADDITIONAL INFO:
    Alright, so I've discovered that the ONLY time the date wrapping error occurs is when the axis labels contain only the month and year, any other time it places it properly.
    Does anyone know where I can report this bug?

    Perre wrote:I'm used to being able to pick one or a couple of songs and then adding it a specified playlist. Is this impossible in sonata?
    It's clearly not impossible, just different than you expect. Create your playlist as you want it to appear in the Current tab (meaning don't dump every single song from your library in there, just the ones you want) and then save the playlist.
    Perre wrote:And if I try to play the m3u file created (the one with every song listed) through freevo I get a message that the directory is empty. What am I doing wrong??
    Look at save_absolute_paths_in_playlists in your mpd.conf.

  • MacBook Pro 15 with Windows 8.1 installed via Boot Camp problem with keys "@" and " " of the keyboard

    Hello,
    I have a MacBook Pro Retina Maverick in 2013 on which I installed Windows via Boot Camp 8.1.
    The installation went well but when I am running Windows 8.1, I have a problem with "@" and "<" keys on the keyboard.
    When I type the "@" key, I get "<"
    When I type the "<" button, I get "@"
    I have reinstall Boot Camp from Windows 8.1 for reinstall the drivers and see if it would solve the problem but it was not the case.
    Someone of you has he encountered the same problem?
    Thank you.

    The language of my Keyboard is French

  • Zen Touch: problem with touch pad and formatt

    Hi guys!
    I have a Zen Touch 20gb but I'm experiencing big problems with my touch pad: it really doesn't work fine, precision is almost none, to poit the desired voice in any menu I have to work hard. If the menu is longer it is almost impossible to navigate it with precision. I can't move of a single position, it jumps at least two... Is it a common problem or should I take it to be checked up?
    2nd problem:
    I was trying to format the player's HD. Instructions said press play botton and contemporarly reset hole.
    But nothing happens. When I release the system reboots.
    Any idea?
    Thanx!
    Gp

    Please be patient with the touch pad. Reading these boards, I think a lot of people are not really understanding how the touch pad works and assuming it's defecti've and returning the Touch. First, set the sensitivity to where it's best for you. If you can't move only one line at a time, you may have it set too sensiti've. Second, use your index finger, not your thumb. Then, practice moving around. For me, it was really easy to move rapidly through the choices or to move just one line at a time. But moving at medium speed always tripped me up, until I figured out the technique of repeatedly stroking the touch pad through the slow zone to move several lines at a time, just like you were using a scroll wheel.

  • Problem with touch pad

    ''Duplicate post, continue here - [https://support.mozilla.com/en-US/questions/794303]''
    i can't use the '''touch pad''' in FF4 RC2..why?..with mouse no problem but with touch pad there is...
    i have acer aspire 7520G
    thank you!

    Dear samarif 
    Welcome to Lenovo Forums
    Please toatally Shut Down the machine
    then unpluge the ac adpter
    press and hold on the power button for 10 Second
    then check the TP performance
    Thanks
    Alaa
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • Having problems with key chain password

    I just got my mac book yesterday, and I'm having problems with my keychain password.
    My keychain password is not the same as my login password, it won't accept it, so i think i made a typing error.
    Each time i go on to safari, it asks for the password, which i don't have. i've tried the key chain first aid, and that still doesn't work. I've also tried keychain access, and that also doesn't work as it asks for the password first!
    Is there a way that i can reset it?

    There are user passwords and Administrator passwords. The only way to check your keychain password is to be the administrator. In an effort to secure my MacBook, I have an administrator account that I don't use at all and I have a user account that is all I use. It is a great way to protect your MacBook info from others.
    As to your question, passwords are case sensitive. You can try to change the password by inserting the CD's that came with your MacBook and reset the password. Seeing that you just got it yesterday, you probably don't have much personal information on it yet, you could use disk utility from the CD and reinstall the Operating System.
    Good Luck.
    Adam

  • Problem with key mapping in 10g

    Hello,
    my client is using key mapping on their reports server. It works fine except for parameter values...
    I can run this URL:
    http://<host>/reports/rwservlet?kr+2002+20
    and there is a mapping for kr in the cgicmd.dat file like this:
    kr: report=KR userid=<user>/<pw>@orcl desformat=html destype=cache p_verksamhetsar=%1
    p_verksamhetsar is a parameter of the report (meaning year).
    My problem is that when the report is run using the above URL the parameter gets the value 2002=
    An equal sign is added! The year column is a varchar2 so the query works but gives no result.
    I get the same problem if I try this URL:
    http://<host>/reports/rwservlet?kr%262002%2620
    If I run this URL it works fine (with a result as well):
    http://<host>/reports/rwservlet?report=KR&userid=<user>/<pw>@orcl&desformat=html&destype=cache&p_verksamhetsar=2004
    Any suggestions?
    Kind regards
    Tomas Albinsson

    Hi Kranthi,
    I think you mean %* at the end, meaning all parameters sent.
    Yes, I use this approach now as I've been unable to get %1, %2 etc to work.
    Strange, because %1 is described in the manual and I feel I use it like they say.
    Well, it works in a way, just that = is appended to the values.
    It has that buggy smell :)
    Kind regards
    Tomas

  • Problems with key shortcuts after kernel update (can't shutdown wifi)

    Hi! Sorry for my poor english!
    I have 2 problems on my laptop that went out after a kernel update; the first one involves the wireless card (Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01), but I don't think it is important): when I press the key shortcut it switches off only partially, the led remains lighted and with "rfkill list all" i get that is actually only software blocked.
    The second problem is about the key shortcut to switch off the screen: even with xev it isn't recognised anymore.
    I am pretty sure the 2 problems are related; the latest kernel with they were working is 3.5.6-1, in fact if I downgrade to that version I haven't got any problem.
    I have encountered this issue with 3 models of Asus EEEPC: 1015pd (mine), 1215b and 1015cx, (the first two with AR9285, the third with AR9485).
    Thanks for the help ;-)

    Ok, so after removing catalyst-test and trying to install catalyst, I got the following error:
    resolving dependencies...
    warning: cannot resolve "catalyst-utils", a dependency of "catalyst"
    :: The following package cannot be upgraded due to unresolvable dependencies:
    catalyst
    Proceeding to try installing catalyst-utils...

  • Pb with Key pad (numlock) Satellite P300

    I have a P300 satellite, and my keypad doens't work normally when I lock numlock in order to write figures (1, 2, 3 ...). In any case (touch "numlock" Iocked or not) I cannot manage to write figures thanks to the keypad. When the green light is on it happens nothing when I press a touch of the keypad, when the light is off it works normaly, I mean it is like the arrows.
    May be somebody can help me.
    Thank you.

    My friends P300 had the same problem!
    The "7890UIOPJKLM>" keys on the keyboard would output numbers even though its a full sized keyboard with a separate keypad.
    I cant remember exactly how the ASP fixed it, apparently there is a setting that changes the screen size to 17". I dont know how they changed it, I am guessing they use a special Diagnostics disk or DMI utility.
    Send it to an ASP, they should be able to fix it :)

  • Problems with Key Figure and Drilldown

    Good day to you, experts. Several of our reports are required to include a key figure which shows a percentage value. The Query must show something similar to the following (please ignore the "-"):
    Total Products---Products Sold--
    Percentage sold
    Shop A / Jan--5020--
    40%
    Shop B / Jan--2828--
    100%
    Shop C / Jan--10030--
    30%
    TOTALS / Jan--17878--
    56.66%
    We can see this information for all months. As you can see, it shows the "Shop" Characteristic as well as the Calendar Month (or year, or year/month). The information is updated monthly. The percentage total is calculated as average.
    So far so good. The problem is that whenever I take away the Calendar Month characteristic (in order to see this information summarized and not detailed by month), the "Percentage Sold" Key Figure (which is loaded along with the rest of the information, not calculated in the Query) shows strange data, something like this:
    Total Products---Products Sold--
    Percentage sold
    Shop A--250140--
    220%
    Shop B--108100--
    454%
    Shop C--466180--
    150%
    TOTALS--824420--
    274.66%
    So as long as I keep the most detailed information on the table, it is displayed correctly, and as soon as I take away any of the details (it also happens with the Shop characteristic), the percentage sold displays wrong data. I have tried displaying individual values differently. I also tried using a formula to calculate the percentage sold, which appeared to solve this issue, but after testing it I found that the data on "TOTALS" was incorrect both with and without the monthly detail. This issue has become quite urgent as we are supposed to publish these reports very soon.
    Any ideas for solving this issue?

    Hi, thanks for the quick reply. I forgot to mention that. As I wrote before, this percentage is given to us directly in the file that is loaded on the system, but since there were problems when taking away a characteristic from the table, I created a formula which should give us the same data. The formula is Percentage = "Products Sold / Total Products" (I used the Percentage part operator, so it looks like this "Products Sold %A Total Products"). The TOTALS value is validated with the person in charge of giving us the file to load.
    A sample data record:
    DATE--SHOP_ID-DEPT-PRODUCTS-SOLD---PCT.
    20080101--125020--
    40
    Edited by: Pedro Olvera on Aug 1, 2008 12:21 PM

  • Problems with keys and failure to refresh them...

    When updating I've got this problem:
    lib32-libdrm-2.4.50-1-x86_64 98.3 KiB 82.2K/s 00:01 [################################] 100%
    (167/167) checking keys in keyring [################################] 100%
    downloading required keys...
    :: Import PGP key 2048R/487328A9, "Bartlomiej Piotrowski <[email protected]>", created: 2011-10-10? [Y/n]
    and then when I try and follow some advice from a similar thread this is what happens:
    # rm -R /etc/pacman.d/gnupg
    # rm /var/lib/pacman/sync/*
    # pacman-key --init
    gpg: /etc/pacman.d/gnupg/trustdb.gpg: trustdb created
    gpg: no ultimately trusted keys found
    gpg: Generating pacman keyring master key...
    gpg: key 04FC7A15 marked as ultimately trusted
    gpg: Done
    ==> Updating trust database...
    gpg: 3 marginal(s) needed, 1 complete(s) needed, PGP trust model
    gpg: depth: 0 valid: 1 signed: 0 trust: 0-, 0q, 0n, 0m, 0f, 1u
    # pacman-key --populate archlinux
    ==> ERROR: The keyring file /usr/share/pacman/keyrings/archlinux.gpg
    does not exist.
    Let me know what else I should post to help with troubleshooting. I'm hoping I can do better than having to verify each key individually eheh
    many thanks,
    df
    Last edited by Devotedfollower (2013-12-10 00:26:40)

    Devotedfollower wrote:
    When updating I've got this problem:
    lib32-libdrm-2.4.50-1-x86_64 98.3 KiB 82.2K/s 00:01 [################################] 100%
    (167/167) checking keys in keyring [################################] 100%
    downloading required keys...
    :: Import PGP key 2048R/487328A9, "Bartlomiej Piotrowski <[email protected]>", created: 2011-10-10? [Y/n]
    How is this a problem? Pacman is telling you what to do... Why would this prompt you to delete your keyring?

  • Problems with Key board and mouse

    Ok, right now I have my mouse connected through my keyboard. And A: My mouse scroll button won't scroll down anymore. There use to be an audible clicking when it did, and now it doesn't even make that click.
    But the annoying thing is the keyboard. Every so often (sometimes more frequently than I'd like to deal with) my keyboard goes batty and decides it's going to act like it's holding down the enter key and won't stop. It makes posting blogs and etc very difficult. because I have to spend time correcting it, at which point it starts to do it again. Has anyone else experienced this, an/or found a way to fix it?

    I have this problem occasionally.
    Sometimes something as simple as using a different USB port helps.
    best wishes
    David
    go zags

Maybe you are looking for