Problems with Keynote 2 files opened in Keynote 3

Hi all,
I have about 50 lectures in Keynote 2 format that I want to use in Keynote 3 having 'upgraded' at the weekend.
Problem is when I open the file in K3 my bullet-points have mysteriously changed their alignment - the first build is fine (horizontal, in the right place), but the second and subsequent builds are vertically aligned to the right of the slide and go off the bottom of the slide.
Anybody else had this problem and any idea how to fix it?
p.s I should mention I am using files created in K2 with themes from Keynote User (the lower-case light-blue series).
cheers
Julian Prior

Julian,
This is due to a bug in the parameters attached to the bullet settings - if you look on the Text Inspector, Bullet tab - you'll likely see the Text Indent value at the bottom is showing up as "NaN" (not a number). If you set that to zero (or any numeric value), it should revert to a more familiar state. At this stage it looks like this effects any theme/presentation that's Keynote 1.x compatible.
Might not hurt to send a bug report via the feedback page so there's more than just a few of us pointing it out.
-jb
Mac OS X (10.4.3)

Similar Messages

Haven't been able to use pages for a while. Keep getting following message. Have tried reinstalling iWork, but no luck. Same problems with Keynote and Numbers/Users/scottmcdonald/Desktop/Screen Shot 2012-03-14 at 9.39.52 PM.png

Haven't been able to use pages for a while. Keep getting following message. Have tried reinstalling iWork, but no luck. Same problems with Keynote and Numbers/

Have you moved Pages from its installed location? Or just dragged a copy to your current system?
It can't find some of its resources apparently.
Peter

Hi! I´m having problems with showing video files in Qlab on my Macbook Air. A sound/video technician told me to "blow out" my Mac. Was told to use cmd+ r when restarting. Is this the right way?

Hi! I´m having problems with showing video files in Qlab on my Macbook Air. It started suddenly. Consulted a sound/video technician who told me to "blow out" my Mac. Was told to use cmd+r when restarting. Is this the right way to clean up my Mac? And is it likely that some kind of bug is causing problems for Qlab to show video files? I´ve already tried with a bunch of different video files and sometimes Qlab plays them and sometimes not. I need the Qlab playlist for a theatre show and only have a week until showtime so starting to really worry. Is there anyone out there who can help?

Your Mac runs maintenance in the background for you.
Command + R gives you access to restore, repair, or reformat the drive using OS X Recovery
No idea why that was suggested.
You may have a third party video player installed that's causing an incompatibility issue.
Check these folders:
/Library/Internet Plug-Ins/
/Library/Input Methods/
/Library/InputManagers/
/Library/ScriptingAdditions
~/Library/Internet Plug-Ins/
~/Library/Input Methods/
~/Library/InputManagers/
~/Library/ScriptingAdditions
The first four locations listed are in the root-level Library on your hard disk, not the user-level Library in your Home folder.The tilde (~) represents your Home folder.
To access the Home folder in OS X Lion or Mountain Lion, open the Finder, hold the Option key, and chooseGo > Library.

InDesign CS5 causing problems with InCopy assignment file but not content files

I'm having a strange InDesign/InCopy CS5 issue (Mac OSX 10.6.6; all system & Adobe updates are current). In my InDesign doc I have one assignment file containing two content files. All of the InCopy pieces work fine in InDesign (i.e., I can check out/in, edit, etc.). When I go to open the assignment file in InCopy, InCopy starts to open it but then crashes. If I try to open each content file directly in InCopy, no problem. I've tried deleting and recreating new assignments in InDesign, but they all have the same result in InCopy.
I think this actually is a problem with the InDesign file because if I export the InDesign file to IDML, then try to open the IDML file, InDesign crashes! I've trashed my InDesign preferences, made sure all cross-references are up to date, etc. Anybody have any ideas what else to look for in my InDesign file that might cause this problem?
Thanks!
Andrea

Thanks John!
1) Here are the first 10-ish lines from the crash report that is generated when I try to open the IDML file:
Thread 0 Crashed: Dispatch queue: com.apple.main-thread
0   ???                               0xa0c266f0 _XHNDL_trapback_instruction + 0
1   com.adobe.InDesign.Indexing       0x20778192 GetPlugIn + 341394
2   com.adobe.InDesign.Indexing       0x20779009 GetPlugIn + 345097
3   PublicLib.dylib                   0x0129228b CScriptProvider::AccessProperties(IScriptRequestData*, IScript*) + 571
4   com.adobe.InDesign.Scripting      0x1f4befe8 GetPlugIn + 166440
5   com.adobe.InDesign.Scripting      0x1f4c2e31 GetPlugIn + 182385
6   com.adobe.InDesign.INXCore        0x20641444 GetPlugIn + 45220
7   PublicLib.dylib                   0x0142c9e8 CScriptDOMElement::GetMultipleAttributes(K2Vector<IDType<ScriptID_tag>, K2Allocator<IDType<ScriptID_tag> > > const&, adobe::version_1::vector<KeyValuePair<IDType<ScriptID_tag>, DOMAttributeValue>, adobe::version_1::capture_allocator<KeyValuePair<IDType<ScriptID_tag>, DOMAttributeValue> > >&) + 280
8   PublicLib.dylib                   0x0142bd38 CScriptDOMElement::InsertProperties(adobe::version_1::vector<KeyValuePair<IDType<ScriptID _tag>, ScriptData>, adobe::version_1::capture_allocator<KeyValuePair<IDType<ScriptID_tag>, ScriptData> > >&, adobe::version_1::vector<KeyValuePair<IDType<ScriptID_tag>, DOMAttributeValue>, adobe::version_1::capture_allocator<KeyValuePair<IDType<ScriptID_tag>, DOMAttributeValue> > > const&, short, short) + 1336
9   PublicLib.dylib                   0x0142beab CScriptDOMElement::SetSimpleAttributes(adobe::version_1::vector<KeyValuePair<IDType<Scrip tID_tag>, DOMAttributeValue>, adobe::version_1::capture_allocator<KeyValuePair<IDType<ScriptID_tag>, DOMAttributeValue> > > const&, short) + 91
10 PublicLib.dylib                   0x0142c0d3 CScriptDOMElement::SetAttributes(adobe::version_1::vector<KeyValuePair<IDType<ScriptID_ta g>, DOMAttributeValue>, adobe::version_1::capture_allocator<KeyValuePair<IDType<ScriptID_tag>, DOMAttributeValue> > > const&) + 51
11 PublicLib.dylib                   0x0142a2ea CScriptDOMElement::SetAttribute(IDType<ScriptID_tag>, DOMAttributeValue const&) + 202
2) That works. Moved all pages (frame threading was preserved) to a new doc, exported to IDML, opened new IDML file just fine. Woo hoo! One of my editors won't be pleased that all of the tracked changes have disappeared, but at least the file functions now
Wish I knew what caused the problem in the first place so we could (hopefully) prevent this from happening again. Any ideas?
Thanks again for your help!
Cheers,
Andrea

How do I access files that have been recovered (after a Mavericks problem) with the .cca file extension

How do I access files that have been recovered (after a Mavericks problem) with the .cca file extension

First, to access documents you must use an app designed for that specific Document type. So Pages will not be able to open PDFs. The Documents app by Readdle can handle PDFs though. In the latter case, you'd open the app, click the menu icon at its top left, and click Open to go to your iCloud Drive. With Pages, if you had files outside the main Pages folder, click + then iCloud and navigate to the file's location.
Matt

How can I fix this problem with exporting Pages files?

Hello,
I'm having problems with exporting Pages files to Word or PDF (I haven't tried the other formats). Whenever I try to export the Page file, I get one message like this: "The document "XXXXXXX" could not be exported as "YYYYYYY". This problem started after the last Pages update, before that it was working fine. I restarted the computer, updated the OS, but the problem hasn't been solved.
Does anyone know how to fix this problem?
Thank you in advance!
Best regards,
Filipe

Computers are made of parts made by humans and assembled by humans of materials that are not perfect.
For example, a display cable that was accidentally pinched during assembly would pass quality control testing with flying colors and would not fail until the lid had been opened and closed several times.
Likewise a display might not fail until powered on and off a few hundred times.

Problem with an excel file

Dear All,
I have a problem with an EXCEL file, i'm in a domain with windows server 2003 and all of the computer have windows 7, a user had open 3 weeks ago a fil excel after she gone on holiday so the file remain open (i don't know how) by she.
I've try with all unlocker program to make the file deletable, but not work... it is very strange because if i try to open it with the account of the user that open the file appears always the same error (open read only)...
Could you help me?
thanks

Hi,
You may end the Excel process first, the “PsTools” have a pskill command that you can use to end a process remotely.
Here’s a simple command:
pskill \\computer –u username -p password excel.exe
For more information, please see the KB below:
http://technet.microsoft.com/en-us/sysinternals/bb896649.aspx
Best Regards

This Mac can't connect to iCloud because of a problem with my email address Open iCloud preferences to fix this problem"

I keep getting this message over and over and over.
This Mac can't connect to iCloud because of a problem with <my email address>
Open iCloud preferences to fix this problem"
I go to IC Preferences but there is nothing I can fix there that is relative.
My outbox is no longer working in MAIL so I cannot email out. I have to use my wife's MBP to send emails.
I can get emails. I didn't change anything in m,ail preferences, so what is Apple doing to me?

I also have had this problem and see no resolution - signed out of my account and signed in again, did not get any resolution to the problem. done this twice. Is Apple addressing this? I thought that 10.10.1 would resolve this but found to my dismay that there has been no resolution. Each time I log out of iCloud and then sign in again, there is a time lag before all my files in iCloud become accessible so have stopped trying this remedy. I also have issues with iTunes where am asked for my password 4 times before I can log in. Would like to know if there is anything in the pipeline to remedy/rectify this problem. Issues with bad internet connectivity have improved but are still there. Wish Apple would spend some more time in testing and resolving issues before releasing new software.

Problems with some PDF files

Hi,
I have problems with some PDF files. After clicking on link to the file Safari shows me insted of normal document (which is working on Windows) hashes, numbers etc like it was a problem with coding or something. First I was using Preview, I though that maybe installing Acrobat Reader with plugins will solve the problem, but ofcourse it didn't. Did somebody has this same problem?

Back up all data.
Please triple-click anywhere in the line below on this page to select it:
defaults delete -app Safari WebKitOmitPDFSupport
Copy the selected text to the Clipboard by pressing the key combination command-C.
Quit Safari. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing the key combination command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
Wait for a new line ending in a dollar sign (“$”) to appear below what you entered. You can then quit Terminal. Test.

Tempo problems with imported wav files

Hey everyone, sorry if there's a quick fix for this in the forums that I couldn't find, but I've been having some tempo problems with imported .wav files.
Long story short, my system couldn't handle playing all the tracks for a song while recording drums, so I bounced out an mp3 of the song and put it in a new Logic file so my drummer could just play along to that as I recorded him. Unfortunately, the original song is at 167 bpm, but I forgot to change the bpm in the new Logic file with the .mp3 file of the song to 167 bpm, so it was left at the default 120 bpm.
So, the drums were recorded at the correct 167 bpm, but Logic thinks that those new drum .wav files should be played at 120 bpm, so when I import my drum tracks back into the original file, they do not play correctly at all.
I could get record it all again, but I wanted to check if there was a way I could salvage what I already have, since my drummer lives about an hour away right now and can't just come over whenever he wants.
Thanks for the help! I really appreciate it.

Hi,
First, do not use MP3 in Logic, the sound quality is less than AIFF, WAV or CAF, and Logic has to decode it for playback, making it a heavier burden on the CPU than an uncoded audiofile, such as AIFF, WAV or CAF.
Secondly, audio files are independent of Logic's tempo. If you bounce down an audio file in any format (other than Apple Loop), it will play back at the same speed, +regardless of Logics' tempo setting+, either at recording or playback. Logic doesn't 'think' anything. The BPM is only important to MIDI tracks, or to the spacing between audio files. The audio files themselves *are not affected* by the tempo setting. If you import an audio file of tempo 167 into a 120 BPM project, the file will still play at 167, only Logic will indicate the wrong bar positions.
regards, Erik.

Problem with preview PDF files on Windows 7 32bit

Hello,
in my office I have a problem with preview PDF files on my computers. The files are allright, but if I select a file and click on preview mode after ~ 10sec operation system write something "Preview this file is corrupt for PDF Preview Handler wrong". On other 64bit computers with same programs the preview is work. I try uninstall all Adobe soft (Reader, Flash), clean all Adobe data from folders in root and in register, but it is not solve this problem. On Microsoft forums wrote me, that the problem is probably with AR plugin.
So, can someone help me?
Config PC:
Windows 7 32/64bit Pro
Intel i3, 4GB
Adobe Reader 11.0.5
Adobe Flash Player 15 ActiveX
Adobe Flash Player 15 plugin
Preview Handler Surrogate Host ver.: 6.1.7601.17514
Thank you for help.

I think I figured it out after reading other forums. Thanks!

Problem with printing pdf file

hello,
lately i have problem with printing pdf file:
i click on the print button and the respod is very slow
it takes more than a minute till the print window apears.
i tryied to install version X but it's the same, the problem exist only when printing via adobe reader,
other programs i'd working much faster.
please advice,
thank you

No, it is not set to overprint. Also, I have to add that the printing results were not consistent. Sometimes it covered and sometimes it did not.

Problem with uploading a file in Clustered Environment

Hi,
I have a problem with uploading a file in a clustered environment. I have an iview component which facilitates an upload action of an xml config file. The problem is that the upload of the modified XML file is reflected only in the central instance of the cluster and not in the dialog instances. The dialog instances hold the old config file.
Is there any solution to upload the file to all the nodes in the cluster.
Thanks
Kiran

Hi,
This is a known problem with clustered environment. Remember that your portal component runs on just on dialog instance and it doesn't automatically have access to the other nodes. However, there are some ways to get around this
1. Use KM to store files. KM is a common repository for all application servers and therefore you needn't worry more
2. Use an external batch oriented product (suresync/robocopy) to synch folders on the different DIs. You basically use your existing portal component, but there is a batch job which makes sure the upload folder is identical on all DIs (however, there is a slight delay depending on how often you run the batch job)
3. Store the files on a shared disk directly from the portal component.
Cheers
Dagfinn

Hi, I have problem with importing MOV files from SJCAM 4000. MOV files are in supported formats for Adobe Premiere Elements 11. But if I'm importing MOV file, only audio part is imported, video part is not imported. How can I solve this problem?

Hi, I have problem with importing MOV files from SJCAM 4000. MOV files are in supported formats for Adobe Premiere Elements 11. But if I'm importing MOV file, only audio part is imported, video part is not imported. How can I solve this problem?

haben
From looking at the specifications of your camera (SJCam 4000), we know already what video compression your camera is using. It is H.264.
A H.264.mov file should be supported by Premiere Elements 11. On what computer operating system is your Premiere Elements 11 running?
Do you have the latest version of QuickTime installed on your computer? And, are you running QuickTime and Premiere Elements 11 from a
User Account with administrative privileges? Please go to Premiere Elements 11 Publish+Share/Computer/QuickTime to confirm that you find
presets there for the QuickTime choice there.
What are the properties of these H.264.mov files - is it 1080p30 (1920 x 1080p30) or something else? Do you know if this camera is recording with a variable or
a constant frame rate?
Please review and consider and then we will decide what next.
Thank you.
ATR

I can not do the update , what should I do to fix this error ? "There was a problem with downloading the file . For tips on troubleshooting , please go to Customer Support . ( Error code : 204 ) ." thanks

I can not do the update , what should I do to fix this error ?
"There was a problem with downloading the file . For tips on troubleshooting , please go to Customer Support . ( Error code : 204 ) ." thanks

Hi,
Please refer to the help document below:
Error downloading, installing, or updating Creative Cloud applications
Regards,
Sheena

Problem with printing txt file

I have a problem with printing txt file. My code looks like :
String filename = something.txt";
DocFlavor flavor = DocFlavor.INPUT_STREAM.AUTOSENSE;
PrintService[] services = PrintServiceLookup.lookupPrintServices(
          flavor, null);
PrintRequestAttributeSet pras = new HashPrintRequestAttributeSet();
pras.add(PrintQuality.DRAFT);
pras.add(new Copies(1));
pras.add(MediaSizeName.ISO_A4);
pras.add(Sides.ONE_SIDED);
pras.add(Chromaticity.MONOCHROME);
PrintService service = ServiceUI.printDialog(null, 200, 200,
          services, services[0],
          null,
          pras);
if (service != null)
try
DocPrintJob job = service.createPrintJob();
FileInputStream fis = new FileInputStream(filename);
DocAttributeSet das = new HashDocAttributeSet();
Doc doc = new SimpleDoc(fis, flavor, das);
job.print(doc, pras);
Thread.sleep(10000);
catch(FileNotFoundException e)
catch(PrintException e1)
catch(InterruptedException e2)
It doesn't work :(
What is my purpose: I would like to print .txt file but I would like to get PrintDialog where I can choose PrintQuality, Chromaticity etc. I found also that I should use DocFlavor.INPUT_STREAM.TEXT_PLAIN_HOST but I don't know how.
I will be very gratefull for help :)

I tested it on 3 printers (different models of hp). 2 of them don't give me any error but when it started print priter stoped (just as it dosesn't have a paper), but 1 of them doesn't react (there were no errors), i thought tahat something was wrong with printers but when I change DocFlavor.INPUT_STREAM.AUTOSENSE to DocFlavor.GIF and filename to dog.gif it works so mybe there is another way to print txt file

Problems with Keynote 2 files opened in Keynote 3

Similar Messages

Maybe you are looking for