Problems with keywords being attached during import that I did not designate
Hello all -
I am using Lightroom 2.2 on a Windows machine. I was futzing around before watching the videos and somehow now when I import photos, I have a bunch of keywords attached to each one that I had no intention of attaching. Be be clearer - when I am importing - the keyword box is either blank, or I put other keywords in it - NOT the ones that keep showing up. But each time - the keywords I didn't want show up with the ones I did want. I created a custom keyword set by mistake in the beginning, but I went back and erased those keywords, just in case it was auto-adding them. Doesn't make a difference. I'm wondering if I should go back to factory presets for everything, but I'm not sure if that would help, or how to do it.This is really keeping me from importing photos - because if I have several hundred photos, I have to then select them all to delete the keywords, then select them and put in the correct ones....a pain! What am I doing wrong? Many thanks - I've looked everywhere for this answer and it keeps eluding me.. Julie
Never mind! (I think) - it turns out that I had a metadata preset to include those keywords - I have since cleared that box and now none of those offending keywords show up
Similar Messages
-
Mail 5.3 I sent a message to a friend however, when viewing it I discovered several other past emails attached to it that I did not intend to send. I was wondering want I may of done wrong. Thanks for any replies.
I get several thousand emails a day and have no issues. Sounds like either the mail account in Mail is configured incorrectly or the Exchange Server (I'm assuming you meant Exchange Server and not Outlook Server) needs a software update or may have a setting that doesn't play well with other mail clients.
-
Apple deleted my account when I made a complaint about being charged for apps that I did not order. They said that my account had been compromised and it was in my best interests to delete it for security reasons! I am convinced the operator deleted my account out of sheer malice because I complained - can anyone advise?
No. It would have been done for security reasons. You notified them that money was being unknowingly taken from your account, so they froze it.
Change your Apple ID here
And also check for unusual activity on your credit card with your bank. Change all your security password while you are at it.
Pete -
Hi. I have a problem with this receipt no. 190048666494. I did not purchase or Aurthorize this purchase request a refund or cancel this purchase. Thank you.
These are user-to-user forums, you are not talking to Apple here.
You can contact iTunes support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption -
I just received an email with a receipt for a purchase that i did not do
i just received an email with a receipt for a purchase that i did not do
<Personal Information Edited by Host>Most of the people on these forums, including myself, are fellow users - you're not talking to iTunes Support here. I've asked the hosts to remove your email address and address from your post
If you didn't make it and nobody else has access to your iTunes account then you can contact iTunes Support via this link and ask them for help : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption -
Problem with oracle text indexes during import
We have a 9.2.0.6 database using oracle text features on a server with windows 2000 5.00.2195 SP4.
We need to export its data ( user ARIANE only ) and then import the result into another 9.2.0.6 database.
The import never comes to an end.
The only way to make it work is to use the "indexes=n" clause.
Then ( without the indexes ), we tried to create manually the oracle text indexes.
We get this error :
CREATE INDEX ARIANE.DOSTEXTE_DTTEXTE_CTXIDX ON ARIANE.DOSTEXTE (DTTEXTE)
INDEXTYPE IS CTXSYS.CONTEXT PARAMETERS('lexer ariane_lexer stoplist ctxsys.default_stoplist storage ariane_storage');
ORA-29855: erreur d'exécution de la routine ODCIINDEXCREATE
ORA-20000: Erreur Oracle Text :
DRG-10700: préférence inexistante : ariane_lexer
ORA-06512: à "CTXSYS.DRUE", ligne 157
ORA-06512: à "CTXSYS.TEXTINDEXMETHODS", ligne 219
We then tried to uninstall Oracle text and install it ( My Oracle Support [ID 275689.1] ). The index creation above still fails.
We also checked our Text installation and setup through My Oracle Support FAQ ( ID 153264.1 ) and everything seems ok.
Do we have to create some ARIANE* lexer preferences through specific pl/sql ( ctx_report* ? ) before importing anything from the ARIANE user ?
What do we need to do exactly when exporting data with oracle text features from one database to another given we used to restore the database through a copy of the entire windows files ?
Is there a specific order to follow to succeed an import ?
Thank you for your help.
Jean-michel, Nemours, FRANCEHi
index preferences are not exported, ie ariane_lexer + ariane_storage, only the Text index metada, thus the DRG-10700 from index DDL on target/import DB.
I recommend to use ctx_report.create_index_script on source/export DB, see Doc ID 189819.1 for details, export with indexes=N and then create text indexes manually after data import.
-Edwin -
Preset is applied in import that i did not specify
I have imported my photos into lightroom for the 3rd time and each time, there says none in preset on import and then in library it shows custom in settings and WB. I have not applied any, if I have I have done it on accident, i have tried and tried to change it but is not working. It will not let me change both settings in the Library tabs only one or the other. I have tried reset and that doesn't work. I have shut down and restarted and and I have deleted and imported. I'm no lightroom genius but I have at least tried to fix it with common sense, now I ask here. it must be a reset as it sharpens and changes all sorts of settings and its making me quite frusterated.
Do you have "Apply Auto Tone adjustments" checked in the Preferences>Presets tab? If yes, uncheck it. If not:
Take one image into the Develop module, press and hold the Shift key and the "Reset" button bottom-right will change to "Reset (Adobe)", then click on that button. Does the image reset to the way you expected it? If so, you've (inadvertently) changed the default develop settings, to reset them go to Develop menu>Set Default Settings>click on "Restore Adobe Default Settings". -
This is very annoying and utterly frustrating
At the moment, you have two options as far as I know.
1. Just live with the issue until Apple resolve it.
2. Turn off iTunes Match. You can just turn it off on specific devices and sync in the old way via USB.
I'm afraid that is it really. -
I heard that there was a problem with Apple being vulnerable to Hackers. Has anyone seen an update for this issue? My IPad received the update last night but I have not seen anything for Safari.
Mac OS X 10.9.2 was released today for this issue and others. Earlier versions are not affected.
See this Apple article - http://support.apple.com/kb/HT6114
You can use the Mac app store to do the update or download it directly from here - http://support.apple.com/kb/DL1725
Best of luck. -
"problem with shortcut/fatal error during installation" on other user accts
I-tunes installed and works with no problem in original user, but when another user account attempts to open Itunes, program attempts to install/configure again, then results in a "problem with shortcut / fatal error during installation" message. Setting the other users to administrators doesn't help, nor does un-installing/re-installing, etc. I am at least the 4th person with this problem (see Burthomp earlier today,Jan. 17 and Richard 1018 on Dec. 29). This problem started with Itunes 7.5, and is still a problem on Itunes 7.6. I have a standard Dell setup, Model E510. There must be a lot of people with this problem. Apple, are you working on this? Anyone else have a suggestion?
I ran into the same problem, but I think I have the solution. First, the problem isn't with iTunes, its an access problem with Windows XP. I tried to run the iTunes program from the Program Files, and I received an "Access Denied" error.
If you try to open the Program Files in My Computer\Local Disk(C:) and receive an "Access Denied" Error, that is why you are receiving a "shortcut problem/Fatal Error during installation".
Here is how I corrected it:
1) Shut down the computer and restart it in "safe mode". I had to look up how to do this, but I pressed F8 when it was restarting and I highlighted the "safe mode" and started the machine. The icons will be large, but ignore it.
2) Open a user that has administrative access -- I used the one user that has access to itunes.
3) Go to My Computer\Local Disk (C:) and right click on the "Program Files" folder. Select "properties" at the bottom.
4) Go to the Security Tab
5) At the top you should see one or two users that have access to the Programs File. One will be the user that itunes works on. Click Add, then click Advanced, then click Find Now.
6) At the bottom should appear a list of users. Select a user on which itunes doesn't work. Click Ok, then click OK again.
7) Give that user full access to the Program File by putting a check mark in the Full Access box.
8) Repeat for the remaining users.
9) Restart computer in normal mode.
10) Go into a user that had problems and click the itunes icon, and it should run.
It worked for me, I hope it works for you. -
Has anyone had problems with iCloud being blocked by corporate web security?
Has anyone else encountered problems with iCloud being blocked by the web-security on company computers? I never had any problems with me.com, but now it appears I will be unable to check my mail via any computer at work.
Since iCloud is a portal for high-volume image and file sharing, I can understand why the site would be blocked, but it's very frustrating that this possibility would not have been anticipated, and an alternate web-mail site been set up. Otherwise many me.com subscribers may be left unable to use the iCloud web-mail portal via computers at work or at internet cafes that may block access to potentially risky websites.
Has anyone figured out a back door to this problem?I dont beleive its an iOS 5 Issue - i think its hardware...
Simply because i have been running iOS 5 beta's since june and there were no issues with my iPhone 4.
When i installed the GM on my iphone 4 (which is the same build as the public release) there were no issues with charging in my vehicle.
Now, charging my iPhone 4S in my car is practically impossible.
when i plug mine in, it will display the "Plugged" symbol on the battery display but not actually charge. the battery will still decrease.
then it will randomly "disconnect" and not register that it is plugged in. then appear to be plugged in, then not, then plugged in, then not.
This will repeat over and over again without actually charging and the charger being in the socket throughout.
however yesterday i left it plugged in and my battery was 9% and after the strange plugged-in behaviour i noticed it was charging normally after about 20 mins in the car.
But when i did the same journey time today, the battery wouldnt register at all.... charging has only been successful ONCE since 14th October on the iPhone 4s
No idea whats up with it...
anybody else? -
Hello sorry but im having a problem with my apple id it appears that i cant download nothing i dont know why but when im going to download something example facebook it appears de app that is charging and then desapere how can i fix that?
Hi there,
I would recommend taking a look at the troubleshooting steps found in the article below.
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
-Griff W. -
i have a problems while purchasing or download a free item in apps store or itunes, it said that you have a problems with previous purchase, it also said that my payment method was decline.,..
Hi shldr2thewheel,
it has been a while since we have last spoke, I would like to let you know, I am still working on getting used to the switch from windows to a Mac/Apple system. I do have a new question for you, I did purchase In Design CS5.5 through journeyed.com through Cuyahoga Community College of which I attend as a student, is there a way to purchase an online book through iTunes to learn that as well? Also, you know me, the struggling student, I would also, when and if the book can be purchased through the iTunes, would need to know if you do know of a much easier book for struggling students like myself and at a reasonable price as well for the In Design CS5.5 program. Our campus bookstore had closed early, and, so did the colleges library and our local library here where I do live, so, I cannot go to either place to purchase a book or to take out a book, plus cash funds are low at this moment as well but, I do have money left on the iTunes account to use, if it can be used. So, can it be used, the iTunes money, towards finding a low priced online book? I am in great need of assistance as I have a project due for my one course for this Tuesday, September 4, 2012.
Sincerely in need of help once again,
Kim -
Revision: 4143
Author: [email protected]
Date: 2008-11-19 14:53:40 -0800 (Wed, 19 Nov 2008)
Log Message:
Fixed problem with metadata in SelectionFormatTextStyles.as so that named colors work for selectionColor, unfocusedSelectionColor, and inactiveSelectionColor attributes on Gumbo components.
Thanks, Glenn!
QE Notes: None
Doc Notes: None
Bugs: SDK-18070
Reviewer: Glenn
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-18070
Modified Paths:
flex/sdk/trunk/frameworks/projects/flex4/src/mx/styles/metadata/SelectionFormatTextStyles .as
flex/sdk/trunk/frameworks/projects/wireframe/bundles.propertiesRevision: 4143
Author: [email protected]
Date: 2008-11-19 14:53:40 -0800 (Wed, 19 Nov 2008)
Log Message:
Fixed problem with metadata in SelectionFormatTextStyles.as so that named colors work for selectionColor, unfocusedSelectionColor, and inactiveSelectionColor attributes on Gumbo components.
Thanks, Glenn!
QE Notes: None
Doc Notes: None
Bugs: SDK-18070
Reviewer: Glenn
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-18070
Modified Paths:
flex/sdk/trunk/frameworks/projects/flex4/src/mx/styles/metadata/SelectionFormatTextStyles .as
flex/sdk/trunk/frameworks/projects/wireframe/bundles.properties -
My 13 inch Macbook pro w retina will not install/download OS X Mavericks because it says I do not have the requirements in order to install it. I purchased my Mac this past month on 11/20/13 so i do not have a problem with it being an older version. Please help. This is my first computer so i dont have any experience on how to fix this.
You can't install the App Store version of Mavericks because your model needs a special version. If you ever need to reinstall it, boot into Recovery.
Maybe you are looking for
-
ENVY dv7 laptop - Start screen in Windows 8 just flashes, can't get past that.
Hello - the other night my daughter unplugged the AC adaptor to work away from her desk. Then, she plugged it in again and the screen was blank. She restarted, click on the User and the screen was just black. We shut down and started again and it wou
-
UTIL-PARAM STRING ERROR when calling a form from OAF Page
Dear Experts, Can you please suggest, as we are getting the below error when we are calling a form from OAF page. "UTIL-PARAM STRING ERROR" We have created a button to call the same and the syntax used is as below. form:PA:OLNG_MOC_PROJECTS_ENGINEER:
-
Problem installing Forte CE 4.0 on W2K
Hi, The problem is that I can�t install Forte on W2K. InstallShield Wizard starts but then nothing happens, I don�t know the reason, no messages are shown, any idea ? Thanks Mar
-
Flash problem when viewing in windows
When I view my flash work on a web site in windows (works fine in mac) when you mouseover the flash area it comes up with a boundary box with a comment tag saying "Click to activate and use this control" - you then have to click in the flash area bef
-
Can I buy a top up sim to use outside my home where I already have wifi?
Can I but a pay as you go sim to use just occasionally outside my home where I already have wifi that I can access?