Problems with KT3 Ultra (MS-6380E)..please help

Hey all-
Here is my system configuration:
MSI KT3 Ultra MS-6380E) motherboard
AMD Athlon 2100+ XP cpu
(2) 512mb PC2700 DDR ram (1 gig total)
(2) 120gb Western Digital 7200rpm Harddrives (240gb total)
Nvidia Geforce Ti 4600 video card
Creative Labs Sound blaster Audigy Platinum
LG 32x10x40 CDRW
16x DVD ROM
400 watt power supply
Here is my problem:
Just built the machine, checked every plug and everything and when I turn on the machine I got no screen, no post, no beeps, nothing.
So I turned the machine, and cleared the CMOS. Turned the machine back on and got post , went into the BIOS, set the time,date, yada yada, all the drives were detected fine. I went in the Frequency/Voltage Control screen and the "CPU FSB Clock" was set to 100 mhz, "CPU Ratio" was set to Auto as was the "CPU Voltage, DDR Voltage, and AGP Voltage". I saved settings and rebooted but then I didn't get a screen, no post, no beeps.
I tried clearing CMOS again, turned machine on, got back in the BIOS just fine. I tried setting the CPU FSB Clock to 133mhz and left everything else on Auto. Rebooted and once again ..nothing.. no screen.
I don't understand what the problem could be. It seems that I can only get a screen when I clear the CMOS. But even if i use the "Load BIOS Setup Defaults" or even the "Load High Performance Defaults" I still get no screen or anything when I reboot.
Can anyone help me here? I have never run into this before.
Thanks in advance!!
Joe

If it is only doing it when you turn your bus speed of 100 up to 133 for the xp processor then I have had the problem. If you are booting with a bad cpu that isn't working properly (can't run at 133) then the computer will not POST. As soon as you clear the cmos it sets the speed back down to 100 for failsafe. If you try to boot a duron processor like a 700 or something on fsb 133 then the motherboard won't post. Make sure you don't have a duron processor instead of a athlon xp or a bad cpu. I would recommend taking it to the place you bought it or else an autorized amd spot. They should be able to throw in another proc and check it out.

Similar Messages

Big problem with KT3 Ultra (ms-6380e v1.0) after flashing the BIOS (de

Hello out there.
I have a real complicated matter with my Kt3 Ultra board.
Used to work fine, but after I flashed it with the latest BIOS (5.7), the board has this strange behaviour: when I clear the CMOS, the board boots up, when I change & save the settings, the board does not "come to life"(black screen & beeper silent).
It has also this weird problem: it shows garbage charaters on the voltage setting of the CPU. Instead of voltages (i.e. 1.750 etc. etc.) I have only "scrambled" strings.
I had MANY difficulties in upgrading the BIOS because the AMI-flashing utility kept telling me "bios protection enabled) (but there was NO bios-protect setting in the previous bios - I checked a zillion times)...but after trying with different revisions finally I made it.
I already tried everything (re-flashed older bios-es etc. etc.)and I'm starting to feel beat ... if you have any advice, please le me know.
It would be really SAD to put this great board in the garbage-dump....
Bye,
Wyk'03

im having problems with this board as well,
i had no problems with the flash,
i did this...
boot to win me floppy,
copy the flash files to ramdrive, flashed to latest bios..
now windows hangs when i have my ac97 audio enabled in bios...
I WANT MY AC97!
hmmm can you get to a dos prompt from a boot disk?
try re-flashing with 1.0 again and then disable the cmos virus protection thingy, and yes it was there it was in the 1.0 bios on the main screen.

Got a new iPhone today and tried to restore from my old phone using icloud but kept coming up with a message that said problem with my icloud back up please help

Got a new iPhone today and tried to restore from my old phone using icloud but kept coming up with a message that said problem with my icloud back up please help

Hi there Clairemcaula,
You may find the troubleshooting steps in the article below helpful.
iCloud: Troubleshooting restoring an iCloud backup
http://support.apple.com/kb/ts4036
-Griff W.

Sound problems with KT3 ultra

Hello All
I have a KT3 Ultra, WinXP Pro, LG CD-RW (HL-DT-ST CD-RW GCE-8160B ), 512 Mb DDR Ram etc.
My problem is that when i rip cd's to MP3 i lose all sound. This has happened with Easy CD-DA and Exact Audio Copy.
If I go into AC'97 Audio config all speakers seem to work exept the Front Left and Right. But this seems to stop them all from playing any audio.
Reinstalling AC'97 fixes it but it's a bit annoying.
Audio driver : 5.10.0.3840
Audio controller : VIA 3059
AC97 Codec : ALC650
Any help appreciated
upinsmoke

I think i solved it by installing the 5.10.0.4050 drivers.
upinsmoke
cant seem to change the thread description to SOLVED

Sound Problems with Mainbord....Please help!

MSI K8N SLI Platinum nForce4 Ultra 4DDR-DIMM 3PCI 3PCIe SATA-II Raid Audio GB-LAN Firewire Socket939 ATX
Hi are having huge problems with my sound.
Got all the gadgets last week. And have built the computer now. Everything is installed, all the drivers i got with the Box.
Now the problem is that the sound i very "crappy". It sound´s like a broken speaker. i have tried with different speakers and the problem persist.
Ive tried changing drivers and all that, and checked all setting. But nothing changes...
I get sound, but it sounds like hell. Cant almost not hear what´s playing or what are said through the speaker.
Is it a hardware problem, something broken on Mainbord??????
Somebody know?
Please help.

Just as a suggestion. . . .
I would remove the soundcard and clean the edge pin connectors. The "static" type sound could be comming from a resistive connection in the edge connector. You may also try running dxdiag from your "start / run" menu and see if the sound results are better.
Also, (even though the sound card is new), you may want to blow out the pin connector in the back of the card (where you plug in your speakers) and try reseating your speaker cable again.
Someone above mentioned power. That could easily be an issue if you have alot of hardware and a power supply that is not up to par with your gear.
EDIT: For some reason, I thought you had a soundblaster card. So, pls forgive the card removal information. just trying to help!
Just some stuff to check. . . GL!
doggy

Problems with kt3 ultra + radeon 9800pro

hey guys,
heres my story (bare with me)
i bought a radeon 9700 pro around christmas time, recieved it, (almost) everything worked fine on it, etc etc. however in games, it would give me this weird flickering poly thing going on (screenshot included) after seeing this, i stuck an extra fan in my case, thinking it was a heating issue. no worky. after that i just assumed the heatsink/fan wasnt securely on the chip. whatever.
anyway, i returned the vid card, got my money back and just decided to sit on the extra money for another couple of months and let prices drop a bit.
soooo i order myself a radeon 9800 pro this week. i get it today, and im getting the EXACT SAME PROBLEM. so obviously it wasnt a heat issue, it was.. something else.
this is where you come in anyone have ANY ideas why i would be having this problem? im attaching a screenshot i snagged of what the error looks like (if that will help at all)
i have already tried running driver cleaners, blah blah blah. i even reformatted and reinstalled windows on the drive, and im STILL having the same problem. not to mention i get occasional lockups and bluescreens.
ive tried flashing bios, updating mobo drivers nothing fixes it.
is this just some quirky incompatability between the mobo and the vid card or what? (i had a gf3ti200 in here before the 9800pro.. never had any problems)
so can anyone help or am i just going to have to buy a new motherboard?
msi kt3 ultra
512 pc2700 ram
80 gig wd
ati radeon 9800 pro

"DOS'ish" ?
start with flashing the latest mobo bios before you start if you haven't allready. I recommend stick with the 3.7 Cat driver (many people are reporting worse problems with the later rev Cat drivers) and follow these directions:
1) download and install the latest via driver (i know, you have it)
2) download and install latest soundblaster driver (if you are using a soundblaster audio card of course)
3) download and install catalyst 3.7 driver/control panel/samartgart from ati.
4) disable fast-write in bios (this was causing corrupted icons and cursor in windoze).
5) go to c:\programs\ati technology\ati control panel and execute smartgart (it's a link)
6) enable - pci read/write and agp read (probably allready is enabled).
7) disable - agp write (default in my case was on causing lots of stability problems in games).
"apply", reboot, then "ok".
above solved all my probs w/9600 pro and msi kt3 ultra-aru
good luck!

Problem with Kt3 ultra

Ok here is my problem. I reformatted my computer and accidentally f-ed with my bios settings. After clearing the cmos and flashing the bios, i reformatted again and reinstalled windows xp. I was able to update everything (SP1, audio drivers) except the video driver. I can install the video driver, but when i reset to finish the installation, the system goes to the windows load screen and then the monitor just goes blank. When i go into safe mode, there is a message that my video card had problem drawing something. I have tried every possible driver there is, and its is the same result. Anyone got suggestions? I have AMD 1700, kt3 ultra, mx440 nvidia. Thanks

OK i tried it in safe mode, which didnt work. Maybe i'm doing this wrong. Here is my procedure. The last working config was right before the video card is detected. I let windows detect the card and install the driver. Then i go into add remove programs and remove the nvidia drivers, which removes the video card from the device list. I then install the 4 in 1 drivers. Restart. Then install the video driver. The restart again, which always leads me to dark screen after windows load. By the way, tahnks for your help.

Problem with KT3 Ultra/AMD 2100+ temp

hi,
Im not too familiar with motherboards but i know when there is something seriously wrong. I have a MSI KT3 Ultra motherboard with a AMD XP 2100+ processor. My computer normally ran at a CPU temp of 45C, but today I installed the new version of PC Alert 4. All of a sudden my CPU temp increased 15C. Now its running at 60C, which i think is too high. I havent changed anything else, and nothing has been overclocked. I have a Geforce 4 Ti 4400 and 512mb RAM. Please help.
Thanks in advance

Quote
PS: anyone else have any other ideas? dont wanna be ungrateful but i dont think thermal paste stops working within a 2 hour period all of a sudden.
No it wont, but it has probably been running at that temp all along.....Maybe your first PCAlert was just giving false temps........Did you ever check it in the bios before?

I have a problem with my win 8 system please help

hi.
yesterday I got the msi gt70 I ordered in the mail everything is working good accept one thing.
whenever I try to install an app (no matter what kind, I tried solitaire and Skype) the app is going up and immediately shuts down nothing happens.
I tried to look it up on the web and did everything it says but nothing helped.
please help me I want thing to work properly.
ty for your attention.

I have the exact same problem in my GT70-0ND-447 with Windows 8 SL x64.
Skype, Ebay and some other Metro style applications does not work.
When I start the application startup screen appears, and then almost immediately closes.
Applications can be seen in the drop down list on the left, but they do not work. In the system log I see a message "The server not register with App DCOM within the required timeout" (error 10010).
Event for Ebay under Microsoft-Windows-TWinUI/Operational: "Activation of the app eBayInc.eBay_1618n3s9xq8tw!App for the Windows.Launch contract failed with error: The app didn't start." (error 5961).
I wrote to support. Waiting...
Please help!

Problems with Oracle XE on XP - Please help!

Hi,
I have oracle XE installed on my machine and it was working absolutely fine for the last year or so. Today there was an trojan intrusion which caused some issues with my windows xp OS like hiding some files, desktop etc. After everything was cleaned up and things back to normal. I am having issues with XE.
I can start and stop XE with out any issues and When I use the run sql command line, I can connect using - connect sys/sys as sydba and I can also run a query to see all the users and see the HR user also.
However, 1. When I connect to my hr user using connect hr/password@xe, it just hangs
2. I tried the- go to Oracle XE admin page but it just hangs for a long time and returns page cannot be found.
3. I can tnsping the xe instance.
Not sure what the issue is? I am not a DBA and don't have much knowledge on this. Is a fresh install the only option? or is there any way to correct this using the sys/sys user?
I have pasted the listenor.log and listenor.ora details below. I tried a fresh install after removing XE. but the same issue!
Please help!
Thanks,
Nikita
Here is the output of listner.log
30-APR-2012 13:18:19 * service_update * xe * 0
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=nikita-lap)(PORT=8080))(Presentation=HTTP)(Session=RAW))
30-APR-2012 13:18:19 * service_update * xe * 0
30-APR-2012 13:18:22 * service_update * xe * 0
30-APR-2012 13:18:25 * service_update * xe * 0
No longer listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=nikita-lap)(PORT=8080))(Presentation=HTTP)(Session=RAW))
30-APR-2012 13:18:27 * service_died * xe * 12537
30-APR-2012 13:18:30 * service_register * xe * 0
30-APR-2012 13:18:30 * service_update * xe * 0
30-APR-2012 13:18:36 * service_update * xe * 0
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=8080))(Presentation=HTTP)(Session=RAW))
30-APR-2012 13:18:39 * service_update * xe * 0
30-APR-2012 13:18:42 * service_update * xe * 0
30-APR-2012 13:18:48 * service_update * xe * 0
30-APR-2012 13:18:55 * http * (ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1708)) * handoff * http * 12518
TNS-12518: TNS:listener could not hand off client connection
TNS-12560: TNS:protocol adapter error
30-APR-2012 13:19:39 * service_update * xe * 0
30-APR-2012 13:19:42 * service_update * xe * 0
30-APR-2012 13:25:03 * service_update * xe * 0
30-APR-2012 13:25:05 * service_update * xe * 0
No longer listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=8080))(Presentation=HTTP)(Session=RAW))
30-APR-2012 13:25:07 * service_died * xe * 12537
30-APR-2012 13:26:14 * service_register * xe * 0
30-APR-2012 13:26:15 * service_update * xe * 0
30-APR-2012 13:26:20 * service_update * xe * 0
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=8080))(Presentation=HTTP)(Session=RAW))
30-APR-2012 13:26:23 * service_update * xe * 0
30-APR-2012 13:26:26 * service_update * xe * 0
30-APR-2012 13:26:29 * service_update * xe * 0
30-APR-2012 13:26:32 * http * (ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1992)) * handoff * http * 12518
TNS-12518: TNS:listener could not hand off client connection
TNS-12560: TNS:protocol adapter error
30-APR-2012 13:26:38 * service_update * xe * 0
Trace information written to C:\oraclexe\app\oracle\product\10.2.0\server\network\trace\listener.trc
30-APR-2012 13:28:43 * trace * 0
No longer listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC_FOR_XEipc)))
No longer listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=nikita-lap)(PORT=1521)))
No longer listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=8080))(Presentation=HTTP)(Session=RAW))
Listener completed notification to CRS on stop
30-APR-2012 13:31:01 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=)(USER=nikita))(COMMAND=stop)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=169869568)) * stop * 0
TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production on 30-APR-2012 13:31:06
Copyright (c) 1991, 2005, Oracle. All rights reserved.
System parameter file is C:\oraclexe\app\oracle\product\10.2.0\server\network\admin\listener.ora
Log messages written to C:\oraclexe\app\oracle\product\10.2.0\server\network\log\listener.log
Trace information written to C:\oraclexe\app\oracle\product\10.2.0\server\network\trace\listener.trc
Trace level is currently 0
Started with pid=5236
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=nikita-lap)(PORT=1521)))
Listener completed notification to CRS on start
TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE
30-APR-2012 13:31:07 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=)(USER=nikita))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=169869568)) * status * 0
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=8080))(Presentation=HTTP)(Session=RAW))
30-APR-2012 13:32:03 * service_register * xe * 0
30-APR-2012 13:32:32 * http * (ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=2040)) * handoff * http * 12518
TNS-12518: TNS:listener could not hand off client connection
TNS-12560: TNS:protocol adapter error
30-APR-2012 13:35:00 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=)(USER=nikita))(COMMAND=status)(ARGUMENTS=64)(SERVICE=LISTENER)(VERSION=169869568)) * status * 0
30-APR-2012 13:42:03 * service_update * xe * 0
and here is the contects of listenor.ora
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oraclexe\app\oracle\product\10.2.0\server)
(PROGRAM = extproc)
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = C:\oraclexe\app\oracle\product\10.2.0\server)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(ADDRESS = (PROTOCOL = TCP)(HOST = nikita-lap)(PORT = 1521))
DEFAULT_SERVICE_LISTENER = (XE)
-------------------------------------------------------------------------------------------------------------------------------------------------------

Hi Clcarter,
Apologies, Did not get notifications for this. Just logged in to check on the status and saw your updates. Looks like an issue with the host.Here is the output of the commands
Ethernet adapter Wireless Network Connection:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Intel(R) Centrino(R) Advanced-N 6200
AGN
Physical Address. . . . . . . . . : 00-27-10-D2-D3-4C
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 191.167.1.7
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 191.167.1.1
DHCP Server . . . . . . . . . . . : 191.167.1.1
DNS Servers . . . . . . . . . . . : 191.167.1.1
Lease Obtained. . . . . . . . . . : Sunday, May 06, 2012 1:14:20 PM
Lease Expires . . . . . . . . . . : Sunday, May 06, 2012 2:14:20 PM
Ethernet adapter Local Area Connection:
Media State . . . . . . . . . . . : Media disconnected
Description . . . . . . . . . . . : Intel(R) 82577LM Gigabit Network Con
nection
Physical Address. . . . . . . . . : 5C-26-0A-16-0E-BE
C:\Documents and Settings\nikita>netstat -an |findstr LISTEN
TCP 0.0.0.0:135 0.0.0.0:0 LISTENING
TCP 0.0.0.0:445 0.0.0.0:0 LISTENING
TCP 0.0.0.0:1521 0.0.0.0:0 LISTENING
TCP 0.0.0.0:1860 0.0.0.0:0 LISTENING
TCP 0.0.0.0:1861 0.0.0.0:0 LISTENING
TCP 0.0.0.0:1863 0.0.0.0:0 LISTENING
TCP 0.0.0.0:2030 0.0.0.0:0 LISTENING
TCP 0.0.0.0:2301 0.0.0.0:0 LISTENING
TCP 0.0.0.0:3389 0.0.0.0:0 LISTENING
TCP 0.0.0.0:8180 0.0.0.0:0 LISTENING
TCP 127.0.0.1:1798 0.0.0.0:0 LISTENING
TCP 127.0.0.1:5152 0.0.0.0:0 LISTENING
TCP 127.0.0.1:5354 0.0.0.0:0 LISTENING
TCP 127.0.0.1:8080 0.0.0.0:0 LISTENING
TCP 127.0.0.1:27015 0.0.0.0:0 LISTENING
TCP 127.0.0.1:62514 0.0.0.0:0 LISTENING
TCP 127.0.0.1:62522 0.0.0.0:0 LISTENING
TCP 191.167.1.2:80 0.0.0.0:0 LISTENING
TCP 191.167.1.7:139 0.0.0.0:0 LISTENING
C:\Documents and Settings\nikita>nslookup 191.167.1.7
DNS request timed out.
timeout was 2 seconds.
*** Can't find server name for address 191.167.1.1: Timed out
*** Default servers are not available
Server: UnKnown
Address: 191.167.1.1
DNS request timed out.
timeout was 2 seconds.
*** Request to UnKnown timed-out
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC_FOR_XE)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Produ
ction
Start Date 30-APR-2012 15:52:42
Uptime 5 days 21 hr. 47 min. 39 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Default Service XE
Listener Parameter File C:\oraclexe\app\oracle\product\10.2.0\server\network\a
dmin\listener.ora
Listener Log File C:\oraclexe\app\oracle\product\10.2.0\server\network\l
og\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC_FOR_XEipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=nikita-lap)(PORT=1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=8080))(Presentation=
HTTP)(Session=RAW))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 3 handler(s) for this service...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "XE_XPT" has 1 instance(s).
Instance "xe", status READY, has 4 handler(s) for this service...
Service "xe" has 1 instance(s).
Instance "xe", status READY, has 4 handler(s) for this service...
The command completed successfully
The nslookup throws a DNS error. could that be the problem?
Thanks,
Nikita

I have a brand computer and I have an ipod nano generation 7. How do you download your music from itunes to your ipod. I did it on the old computer but am having problems with the new computer. Please help. Thanks

Please help. I have a new computer and an ipod nano 7th generation. I am having problems getting my music from Itunes library to my ipod. How do you do it?

Hello Sandy
You can transfer the purchases from your iPhone to your new computer by following the steps in following article.
iTunes Store: Transferring purchases from your iOS device or iPod to a computer
http://support.apple.com/kb/ht1848
If you have music that was not purchased from the iTunes Store, then you will not be able to move it from the iPhone to your computer. Instead you will need to follow the steps in this article that helps with moving the library from the old to the new.
iTunes: How to move your music to a new computer
http://support.apple.com/kb/ht4527
Thanks for using Apple Support Communities.
Regards,
-Norm G.

Problem with Variable!!! Please Help

Hello People!
I have a big problem!!
I have a procedure executed by a program in Pro * C/C++
In this program there is a variable:
char CBATCH[8];
MEMSET (CBATCH, NULL, 8);
This variable is a parameter for my procedure!
create or replace procedure COMPOSER (vnum_composer out number,
vbatch_id in varchar2)
as
begin
select count(batch_id) into vnum_composer
from trl_batch_composer
where batch_id = vbatch_id
and send = 0;
end;
The problem is, vnum_composer is always NULL.
I think thats because in my table, Batch_id is a CHAR(7).
So it cant compare batch_id = vbatch_id....
please help...

You mean the sequence you have in Query Properties - Variable Sequence dont match with the Runtime Selection Window?
I remember having a similar problem last week but cud resolve it after redoing it .
I am guessing ur on BI 7.0 SP 13...
Message was edited by:
Jr Roberto

Serious Problem with New Mac Pro! Please help!!

Ok, long story short.
My Mac pro keeps crashing after I installed the latest 05-2007 security update. It seems to crash everytime I come back to the computer after the screensaver has been on for a while (its not the screensaver though) I reinstalled the newer v1.1 version of the update and I thought the problem had gone, but it hasnt as the computer just crashed again.
I cannot see any correlation to any other programs, and im 99% sure its not a hardware issue. It does not seem to relate to parallels, or the screensaver, or itunes, or anything!
And there is another crazy thing, when the computer restarts, it says that it recovered from a serious error and asks you to sumit a report, so i click the send report button and do you see a normal report window with all the code ? NO!!! Press report and the initial window just DISAPPEARS, nothing else happens!!! i.e it wont send the but to apple!! no wonder they haven't fixed it!!!
The history of the panic log is always the same error:
Tue Jun 5 19:29:24 2007
panic(cpu 3 caller 0x003BDEB0): OSObject::refcount: Attempting to retain a freed object
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x4c543bb8 : 0x128d08 (0x3cb134 0x4c543bdc 0x131de5 0x0)
0x4c543bf8 : 0x3bdeb0 (0x3f0f94 0x3f0f70 0x160f5ba4 0xad319c0)
0x4c543c18 : 0x3c0d3b (0x160f5ba0 0x4ae958 0x28 0x3c09c4)
0x4c543c48 : 0x3c0e94 (0x13c58c40 0xad319c0 0x0 0x3c10ef)
0x4c543c68 : 0x3c188a (0xad319c0 0x0 0x0 0x0)
0x4c543ca8 : 0x3c18f7 (0xad319c0 0x13c3a100 0x13c36b00 0x1628d8)
0x4c543ce8 : 0x38663c (0xad14840 0x0 0x4c543d28 0x3c1002)
0x4c543d08 : 0x389e5b (0xad02080 0xff7da80 0x0 0xad02080)
0x4c543d28 : 0x3b1448 (0xad02080 0xff7da80 0x4c543d58 0x3bdfd9)
0x4c543d78 : 0x188511 (0xad02080 0x14da63b4 0x14da63c8 0x11cc32)
0x4c543db8 : 0x12b4c3 (0x14df20b4 0x14da6398 0x0 0x0)
0x4c543df8 : 0x124b17 (0x14df2000 0x0 0x18 0x4c543edc)
0x4c543f08 : 0x195a42 (0x4c543f44 0x0 0x0 0x0)
0x4c543fc8 : 0x19b21e (0xb101f20 0x0 0x19e0b5 0xb101f20) No mapping exists for frame pointer
Backtrace terminated-invalid frame pointer 0xb011e508
Kernel version:
Darwin Kernel Version 8.9.2: Thu Feb 22 18:08:23 PST 2007; root:xnu-792.19.2~1/RELEASE_I386
Please help someone!

Did you read the thread on Security Update 2007-005?
Frozen Mac Pro

Problem with I-trigue 5600 . Please help!

hi,
My I-trigue 5600 worked perfectly for over 4 years. Buy recently, my rear right channel stoped working I 've tried everything : all satellites work poperly,drivers are ok, I tested it on 2 computers. There is still the same problem. Unfortunately Creative dosn't have after-guarantee service.. So, I tried to open subwoofer, but the inerity is too complicated with many areas flooded with glue or isolation. I tried also to buy another subwoofer / i believe it must have small damage , but the rest of speakers work great and the voice of subwoofer is good as well/ but there is problem with buying a subwoofer separately. Becouse there are only auctions on net.
So , what I supposed to do? Does Creative have separated spare parts to my subwoofer? Can I buy another subwoofer anywhere?
Can I replace my sub to similar from another speakers system and which one would be suitable.
I don't want to change my speakers. They are the best for me, but defect of one chanell is annoying. Really.
I wanted to buy x-fi elite pro ,but now it's pointless.
Please help me
Despere Makary

Hey! I've got the same problem with the same kind of speakers! When im listening to something volume is coming down and after a some time its coming back to its previous level! Coming back to its normal level can be forced by turning the speakers on and off! thats all i've discovered...
i also heard that some of creative speakers have kind of (f**k i dont know the word in english :P ) which works like that: when subwoofer is hot it automatially turns the volume lower to save your speakers from burning form hot :P or something like this :P
hmm... what i discovered that is no matter what i connect as source of music! effect of volume is the same
or maby you discovered the reason of this?
ps.
sory for my very unperfect english...

Have a big problem with report. Very urgent please help

I have a report rep1. When I run the report via batch thru command rwclient to create a file it failed. I got the follwoing error message:
REP-0177: Error while running in remote server
Job 1413 is terminated due to connection timeout.
It does not even try for few seconds before gives this message. I ran some other batch reports whihc took 15 minutes and they were fine.
So, I stopped running the bad report for the day thinking the report is still not dead. I ran the same rep1 next day I still get the same error message. But this time when I ran I looked at the appserver showjobs (which lists the reports that were running and that already ran). The job number is different But still it fails in 3 seconds with the job number 1413 and connection time out. Can any one tell what might be the problem.
Any number of times I run this job I get the same job number with same error (all this is only if I run it as batch using rwclient). If I run this as online by calling it from a form it returns the results without any problems.
Please help. Very urgent.
Thanks in advance.
Asha

You might want to delete the report server .dat file and restart the server and try
his also could be one of the issues we had seen and fixed in 9.0.2.3. Please ensure you have the latest patch applied
Thanks
The Oracle Reports team

Problems with KT3 Ultra (MS-6380E)..please help

Similar Messages

Maybe you are looking for