Problems with KT3V(MS-6712) after BIOS flashing

I bought KT3V(MS-6712) board with AMD AthlonXP 2000+ CPU. After starting PC for the first time, I found out that the system was not able to detect the CPU. I replaced Athlon 2000+ with old Duron and everything was OK.  I went to the store where I bought new Athlon, they tried it and it worked perfectly with two various boards!! They recommended me to flash a newest BIOS. I did it, but the result is a black screen and three repeating beeps.  What´s wrong? Any idea? Is my board damaged? Thanx, Endy

really no idea ?  

Similar Messages

  • K8t Neo2 problem with resume from standby after BIOS flash

    Previously while using the 3.2 BIOS and a Winchester 3200+, Both Standby and hibernation worked perfectly almost without fail.  Since I flashed the BIOS to 9.3 and installed an X2 4200+ I have had a problem with resume from standby.  The machine starts up OK but the 2nd processor core (cpu1) is almost maxed out and stays that way.  Task manager shows total cpu load as about 45-50% (all on cpu1) but shows no running process using any cpu load, just the usual System Idle process at about 99%.  The only way to get it back down to normal again seems to be to reboot.  By Contrast Hibernation works fine, with no increase in cpu load after resume.  I have all the latest MS patch's installed (I think!) the AMD dual core driver and the MS and AMD dual core optimizers.  Any ideas what is going on?

    Noticed last night that S! standby seems to work OK.  Also was experimenting with a fresh windows install on a spare hard drive (checking on another problem).  The fresh windows install appeared to work with S4 hibernation, so it looks like that is the answer to that problem.  However the problem with high cpu load on the second core after resume from S3 suspend to RAM standby was still present.  This problem is so specific and so repeatable (it does it every time without fail), that I feel there must be some very well defined reason for it.  Unfortunately I have no ideas what could be wrong. Have now tried Windows re-install, latest cpu drivers, AMD dual core optimizer, MS dual core optimizer, Cool'n'quite disabled/enabled, and various others and suspend to RAM still gives the same behaviour

  • Tecra S2: Problems with Linux Live CDs after BIOS upgrade

    Hi all,
    a short while ago I flashed the BIOS of my Tecra S2. My current BIOS version now is 2.80. Unfortunately no I have got problems with booting Linux Live CDs like Knoppix or Kanotix. The boot process freezes, when the PCMCIA module is tried bo be started.
    What i want to do now is to downgrade my BIOS version. Does anyone know how that stuff works and does anyone have an old BIOS version from 2005? I couldn`t found older versions on the Toshiba support sites.
    Thanks for all answers!
    biberkopf

    Youre right. On the Toshiba page you will find only the newest version of the BIOS and the older versions are not available on the page.
    In my opinion if you want to downgrade the BIOS you have to ask the authorized service provider in your country for the help.
    But did you check this useful site:
    http://newsletter.toshiba-tro.de/main/
    There you can check the area machine installation help
    It provides some useful tips with the device configuration

  • Hello,my wife have a problem with her macbook pro,after installing flash player it freezes. Have tried to do a restart,didn't help at all. I hope I can get some tips on this. Thank you. Fred

    This is a new problem for me so I hope I can get some answers. Thanks The problem now are not flash player. this Mac freezes and cannot be started again. Every time she tries to login,the screen starts to shiver,like when a wrong password is being used.???? 

    She may have an incompatible version of Flash plyer. Also, there have been some cases of fake copies floating around.
    The best thing is to uninstall it and download a new version directly from Adobe.
    Uninstall instructions are here:
    http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-mac-os.html

  • Having problems with Bridge shutting down after saving photo in PS Cs5,,,,,,,,,  Also when i attempt to update either PS or bridge get an error message in Adobe application manger "Error loading updater workflow"

    Having problems with Bridge shutting down after saving photo in PS Cs5,,,,,,,,,  Also when i attempt to update either PS or bridge get an error message in Adobe application manger "Error loading updater workflow"

    Sorry for the late reply. My email firewall has become a little over zealous & sent a lot of my emails straight to my junk email folder, so I have only just now discovered your reply in my junk mail folder.
    The only "don't open files exceeding xxx megabytes" instruction I can find in my Prefs, is in the Bridge Prefs for Thumbnails, & mine is set at 1000mb. The biggest files I handle are bigger than 200mb so I should be able to open a few, not just one.
    However, this doesn't explain why I can open a psd format file of 180mb, close it, but then can't open a RAW format file of only 26mb immediately after.
    I can open the RAW file only if I restart my computer - very annoying!
    However, thanks for the advice about the video card & memory.
    So, I'm still stuck as to what the issue is.

  • Problem with Rescue and Recovery after installing Norton Internet Security 2010

    Hi all.
    It's my first time in this forum.
    I have a problem, with Rescue and Recovery, after installing Norton Internet Security 2010 on my T43.
    The message I get it:
    "Rescue and Recovery is unable to back up the file 'C:\Documents and settings\all Users\Application Data\ Norton\ 00000082\00000109\000003c1\cltMLS1.bat' Because the file is either corrupted or being used by another application. Please close any application that could be using the file.
    I tried to close the Norton but I couldn't find how.
    Tanks
    Doron71

    Hi and welcome to the forum,
    the reason for this situation is, that the antivir files are protected from being modified.
    This is the reason, why this file cannot be backed up. I assume, that you would get much more such messages, as there are surelly multiple files files, that are protected like this.
    So the solution is to block folders from being archived. Please start RnR application and in the configuration set this folder as the excluded one.
    This will skip the backup of this file and will fix your situation.
    Please let me know, if you have covered this.
    Cheers

  • Problem with Facebook and instagram after istalling iOS 7.1. Can not open them!

    Problem with Facebook and instagram after istalling iOS 7.1. Can not open them!

    Hi Hanjon!
    Here is an article that will help you troubleshoot these purchased apps:
    iOS: An app you installed unexpectedly quits, stops responding, or won’t open
    http://support.apple.com/kb/ts1702
    Thanks for being a part of the Apple Support Communities!
    Regards,
    Braden

  • I am having problems with my music collection, after burning all of my music to the computer I organized it into folders and placed it in the iTunes Folder. Starting on a new computer now. I can get my music from old computer?

    I am having problems with my music collection, after burning all of my music to the computer I organized it into folders and placed it in the iTunes Folder. As of now i realize this was a mistake. Starting on a new computer now. I cant get my music to transfer from the itunes folder on the old computer? I keep getting error "Can't Read from the source file or disk." Whenever I got to folder properties its always checked read only. But when i play the song it works just fine. Im sure this is just because I added music into itunes folder but is there anyway to fix it?

    WMA files are 'window media audio' files, which is a Microsoft format. If you want to add them to your iTunes library on your Mac then you will need to convert them into a compatible format first. If you still have your windows machine then iTunes for Windows can convert them from WMA to MP3 format : https://discussions.apple.com/message/24158701#24158701
    Or try a search for, for example, 'convert wma to mp3' to find programs to convert them.

  • Problems with your HP printer after upgrading to Windows 8.1

    If you are experiencing problems with your HP printer after upgrading to Windows 8.1 please click on the below link and install the HP Print and Scan Doctor and run the utility to fix the issue.
    www.hp.com/go/tools.
    I was an HP employee
    If I have helped you solve your issue please mark it as solved
    **Say Thanks By Clicking on the Kudos Star**

    Hi.....my laserjet 1536dnf mfp was working perfectly with win 8 pro....then I installed win 8.1 pro and now the computer ,which is part of a network,can not communicate with the scanner of the printer--it prints just fine. On another computer (running win 7 ) on the same network, the scanner and all other printer functions  work just fine.
          I have tried installing the latest drivers from HP......scanner still not "communicating" with computer.....also temporarily disabled firewall.....please help...all the best -David G (gossat)

  • Strange problem with my ipod 2g after upgrade to os 4.2

    Strange problem with my ipod 2g after upgrade to os 4.2
    the problem with volume some times when i switch on the ipod i hear the sound
    alarm rings it's work too i can hear it .. but the problem i cant hear anything else as yourtube or music i cant hear buttons sound when i typing
    i hope i get help

    I would try in order:
    - Reset the iPod:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Restore the iPod from backu via iTunes.
    - Restore the iPod to factory defaults/new iPod.

  • A problem with importing layered PSD file into Flash

    Hi.
    There's a problem with importing layered PSD file into Flash.
    If I import a layered PSD file, some part the color of the lower layer is shown at the edge of objects or shadows. Instead, if I crop each layers first and import them, there's no problem.
    If the higher layer has brush or transparent effects, it becomes worse.
    Any help with this problem?
    Thanks.

    How was the original art created? Was the original RGB or CMYK? What is the resolution of the Photoshop file? Flash only works well with RGB and 72 pixel per inch resolution. If your original art is not set this way, then Flash will attempt to convert it as it imports it. Flash uses the sRGB color space. You'll get the best color translation if your Photoshop file is using this color preference.

  • Solutions for problems with QuickTime files in After Effects CC (12.0)

    We have a new blog post up about solutions for problems with QuickTime files in After Effects CC (12.0) because of conflict with DVCPROHDVideoOut QuickTime components. 
    Please read that post and let us know here on this forum thread if you have any questions or comments. 
    Also, please let us know if the proposed solution works for you.

    Mark - The new document that we published is meant to address a specific issue. You can confirm you have the issue by the following:
    Adobe QT32 Server is not running when you receive these errors. Keep Activity Monitor open to track whether or not it is running.
    The crash log for QT32 Server indicate CoreAudio as the last component called. You can find the crash logs in Users/username/Library/Logs/DiagnosticReports. The report will look like this:
    Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
    0   ???                                     0x04981f90 0 + 77078416
    1   com.apple.audio.CoreAudio               0x949d05c1 __Call_block_invoke_03 + 56
    2   libdispatch.dylib                       0x94a90f8f _dispatch_call_block_and_release + 15
    If this is not the issue you're having, please start a new thread and provide the usual data. If your problem does match this issue, please double-check that you've followed the steps in the new document and post back here.

  • I have a problem with a chart refreshing after its bound data provider changes.

    I have a problem with a chart refreshing after its bound data
    provider changes. After the subsetHighLowData.refresh() is called I
    would expect the chart to redraw, but it still looks the same. I
    even inspected the debugger to see if the slice had taken place and
    it had.
    Any ideas coding friends?

    "nikos101" <[email protected]> wrote in
    message
    news:gib6aa$prr$[email protected]..
    >I have a problem with a chart refreshing after its bound
    data provider
    >changes.
    > After the subsetHighLowData.refresh() is called I would
    expect the chart
    > to
    > redraw, but it still looks the same. I even inspected
    the debugger to see
    > if
    > the slice had taken place and it had.
    >
    > Any ideas coding friends?
    >
    > subsetHighLowData.source =
    >
    highLowData.source.slice(slider.values[0],slider.values[1]);
    Just use the ArrayCollection's removeItemAt, and it should
    handle the event
    dispatching for you.
    HTH;
    Amy

  • I have problem with wireless print HP after iOS 7  !? What can i do

    I have problem with wireless print HP after iOS 7  !? What can i do?!  

    Tap Settings / General / Reset / Reset Network Settings if your having a problem with your network. If you have another problem go to the same place in "Reset" and just reset all settings

  • I have been having problems with my speaker. After the recent update I am unable to listen to movies or music using my speaker. The volume bar is completely missing. If I plug a headset into the port, the volume bar reappears.

    I have been having problems with my speaker. After the recent update I am unable to listen to movies, music or apps using my speaker. The volume bar is completely missing. If I plug a headset into the port, the volume bar reappears and then disappears after the headset is removed. This is quite annoying. My child's Apps that he likes to play will not even make a sound. HELP!!!

    Do a reset (Hold Sleep/Wake and Home buttons about 10 secs or more till Apple logo appears, ignore the Slide to Power Off that appears)
    Note: You will not lose any data.

Maybe you are looking for

  • Built in Map App on Iphone 4

    I have an iphone 4 with ios 5.  I was using the built in "map" app today and was expecting it to tell me directions.  Does it not have this capibility? Thank You Tonya

  • JSP newbie - exception handling question

    I have created a method in the declarations sections of my jsp. When a particular exception is found (caught inside my method), i want to be able to redirect the output to either another jsp page, or simply print a message on the page in which the ex

  • Create table for existing table

    dear all I have a partition table with millions records and i want to create table from that table and i want the new table that i create it is contain the same structure(partition) and contain all data i write this code create table abc as select *

  • How to show SO# on A/R invoice

    Our customer wants to print SO# on A/R invoices to track each transactions. But in Layout Designer, we can't find a field for sales order number. We created a user defined field for SO#. Does anyone know how to link this to invoice? Thanks!

  • I can't get the web page email link to work.

    When I click on the envelope icon to email a link to the web page I am presently on, nothing happens.