Problems with LAN RJ45 Ethernet link on Tecra A8-PTA83E

I experienced some problems with the on-board Intel PRO/1000 PL Ethernet adapter. The adapter in most cases works fine: it connects normally in 100 or 1000Mbps - full duplex - speed, depends on wich internetworking devices attached, and the link doesn't present any issues.
But, in some cases, with several Eth devices, the adapter doesn't estabilish the link at all, the green LED on the right (Link?) blinks continuosly with a period of 2 sec. (0.5" on - 1.5" off) and the yellow on the left (Traffic?) remain always off. At the other side of the Cat5e cable, the device (now a router Linksys WAG325N) signs no connection. It's NO cable problem.
Windows (XP Pro, SP2) sometimes reports in the little icon of the LAN adapter driver on the traybar a connection established at various speed (often 100Mbps, but sometimes 1000Mbps!) but very quickly it returns in "cable disconnected" status.
I've tried to upgrade the drivers directly from Intel Support pages because Toshiba's Support doesn't recognize my laptop (!!!) , and because in origin I've made a downgrade to XP (I'm sorry, but I do NOT intend to use the original MS Vista!), but nothing change.
The only way to establish a connection that I found is to manually reduce the speed (10Mbps - full duplex) of the link by the Advanced Settings of the XP driver. In this case all works, but a low speed.
Can anyone help me? Someone has already noticed this problem?
Thanks!
Paolo

Hi
Im not quite sure if its NOT an cable issue.
Did you try to connect both devices using a crossover cable (cross wiring)
There are three different kinds of crosscable:
- 10BASE-T- und 100BASE-TX-Ethernet
- 100BASE-T4-Ethernet
- 1000BASE-T-Ethernet
The difference is usage of crossed wire pairs.
At the other hand the usage of crossover cables is not necessary if you connect a router or switch device.
But in case you would like to connect two notebooks, the crossover cable is required.

Similar Messages

TS4123 I have problem with iTunes story (secure link to itunes store failed). I make In the "Command Prompt" screen, type in netsh winsock reset the itune story is solve but after i close itunes the problem is back

I have problem with iTunes story (secure link to itunes store failed). I make In the "Command Prompt" screen, type in netsh winsock reset the itune story is solve but after i close itunes the problem is back

The results show that you have a proxy server set and this can often cause problems with iTunes.
The proxy setting can be accessed in Internet options>>Connections>>LAN Settings.
Try un-checking the proxy server check box.
It might also be a good idea to run a malware check if you didn't know you had the proxy server set.
You can download a free version of an excellent scanner- Malwarebytes here:
http://www.malwarebytes.org/

Problem with making a database link.

Hello All
I got a problem with making a database link.
When I execute this query
CREATE PUBLIC DATABASE LINK DBNAME
CONNECT TO database IDENTIFIED BY name
USING 'DBNAME.europe.company.com';
I am using other names because its private information
But when I look at the table dba_db_links I see this
OWNER | DB_LINK | USERNAME |HOST
PUBLIC| DBNAME.europe.company.com| name| DBNAME.europe.company.com
So the DB_Link name is changed. And this causes a problem with my asp website. I get the fault message
ORA-02085: database link DBNAME.europe.company.com connects to DBNAME
Cause: a database link connected to a database with a different name. The connection is rejected.
The global_names = true and I prefer to keep it that way.
So does anyone knows what is wrong about my Query or how I can change the DB_Link name.
Thanks for the support,
Remco

Thanks for the help Mohit
But thats whats I was doing.
The query in the first post is the same as what you are posting.
But by an (for me) unknown reason the database converts DBNAME to DBNAME.europe.company.com

Proxy problem with Yahoo search returned links

We have two BM servers here. Older one Netware 6 sp5 w/ BM 3.7 sp3 that works well. A replacement that I have had up but not currently using much Netware 6.5 SP8 w/ BM 3.8 sp5. The latter one has a problem with Yahoo search results. If I point a workstation to the older NW6 BM it works fine in Bing, Google & Yahoo. If I point it to the NW6.5 BM then it will work fine in Bing and Google but in Yahoo it will return the results but when you click on any link there I get this message:
Yahoo!
Yahoo! - Help
The requested URL was not found on this server.
Please check the URL for proper spelling and capitalization. If you're having trouble locating a destination on Yahoo!, try visiting the Yahoo! home page or look through a list of Yahoo!'s online services. Also, you may find what you're looking for if you try searching below.
Any ideas? I have no access rules enforced. Anything that might be of help would be greatly appreciated.....Thank you!

On 03/10/2014 09:56 PM, jpeteet wrote:
>
> Mysterious;2310138 Wrote:
>> On 03/07/2014 09:06 PM, jpeteet wrote:
>>>
>>> We have two BM servers here. Older one Netware 6 sp5 w/ BM 3.7 sp3
>> that
>>> works well. A replacement that I have had up but not currently using
>>> much Netware 6.5 SP8 w/ BM 3.8 sp5. The latter one has a problem with
>>> Yahoo search results. If I point a workstation to the older NW6 BM it
>>> works fine in Bing, Google & Yahoo. If I point it to the NW6.5 BM
>> then
>>> it will work fine in Bing and Google but in Yahoo it will return the
>>> results but when you click on any link there I get this message:
>>>
>>>
>>> Yahoo!
>>> Yahoo! - Help
>>>
>>>
>>> The requested URL was not found on this server.
>>>
>>> Please check the URL for proper spelling and capitalization. If
>> you're
>>> having trouble locating a destination on Yahoo!, try visiting the
>> Yahoo!
>>> home page or look through a list of Yahoo!'s online services. Also,
>> you
>>> may find what you're looking for if you try searching below.
>>>
>>>
>>> Any ideas? I have no access rules enforced. Anything that might be of
>>> help would be greatly appreciated.....Thank you!
>>>
>>>
>>
>> 1. Verify that you use the same proxy.cfg on both servers and the same
>> settings like persistent connections.
>> 2. Take a lan trace on the 3.7 when hitting the yahoo url and a lan
>> trace on the 3.8 doing the same action and compare the differences.
>
> I am still trying to make sense of the Wireshark output. I can see where
> I get the HTTP/1.0 403 Forbidden. What is happening upon further
> inspection is when I click on a link returned from a yahoo search it
> actually takes me to a link that always starts
> "http://r.search.yahoo.com/.......blah blah blah. But If I go to the
> newly opened tab (in IE) and add 's' to the HTTP address and hit enter
> - the link works. Maybe that will help. This happens whether or not I
> have "enforce access rules" checked.....
>
>
1. Verify that you use the same proxy.cfg on both servers and the same
settings like persistent connections.
2. Compare both traces, the working one and the non working one. See if
the returned link from yahoo is the same on both traces and it is coming
from the same server. You may have another firewall/router up in the
path causing the issue.
3. Before taking the lan traces on the netware server using pktscan.nlm,
unload proxy, load proxy -cc to clear cache. Then take the traces and
see at what point the non working one differs from the working one.
check that info is coming from the same up server

Problem with T500 Intel Wifi Link 5300 adapter connectivity

I upgraded my T500 to Windows 7 Professional from Vista Business. Since upgrading, I have been unable to obtain satisfactory WiFi connectivity. Symptoms are that I cannot stream from either the internet or my local server without experiencing periodic interruptions and/or total drops. I've tried reinstalling the driver, replacing the WiFi card itself, and adjusting the parameters associated with the adapter card. Nothing seems to help. I also own a T61 laptop which I also upgraded from Vista Business to Windows 7 Professional, and I have had no problems with WiFi connectivity on that machine. It also has an Intel Wifi adapter but a different model. Both laptops connect to my LAN and the internet through the same D-Link wireless access router.
I'm beginning to suspect that the Windows 7 driver for this particular WiFi adapter is flawed. Has anyone in this forum had a similar experience?
Thanks in advance for your comments/assistance.

(speaking french)
try to use your laptop without 'energy star'. setup full speed processor to maximum.
I thinks the problem turn around win7 and 'energy saving driver'
regards

Problem with jpg & text box links???? HELP!!!!!!!

Hi All,
I have a perplexing problem with creating some links. I created a button using the shapes tools, I use the command/shift/4 to capture the image I created, I go to photoshop, edit it, then save it as a jpeg, put it into my site, make it a link, publish the site .... then nothing. The link won't work. Any other jpeg image i put in easily converts to a link if I desire, why won't this?
Also, I have read on here that you can use a transparent text box over text to create a link without having to convert the actual text and get the annoying underline, etc. that come with it. Any idea how to do this?
Appreciate your help.
Todd
MacBook Pro Mac OS X (10.4.8)

I have a perplexing problem with creating some links. I created a button using the shapes tools, I use the command/shift/4 to capture the image I created, I go to photoshop, edit it, then save it as a jpeg, put it into my site, make it a link, publish the site .... then nothing. The link won't work. Any other jpeg image i put in easily converts to a link if I desire, why won't this?
The process that you describe should work exactly like that. I'm not sure what the issue is with those buttons. Do you have a URL where we can take a look at one of these buttons? It may be that they are getting obscured by something else maybe?
Also, I have read on here that you can use a transparent text box over text to create a link without having to convert the actual text and get the annoying underline, etc. that come with it. Any idea how to do this?
This is true. You can always overlay a SHAPE and change its opacity in the Inspector Graphics tab to 1% in order to make it transparent. It has to be 1% or more, though...zero doesn't work. Also, if the text that you want hyperlinked or hotspotted is in a textbox all by itself, then you can also attach the hyperlink to the textbox itself instead of selecting the text in the textbox. That will also avoid the underline....but it works only if the text is in a textbox all by itself.

Problem with LAN onboard

I have problem with MSI 875P NEO. I am upgrade a BIOS and then i dont disable LAN onboard. Help me!!!!

Dear friend,
I, likewise borgunit, still could find out in anyways whether you want to have LAN enable or disable... Maybe you should follow Danny's instruction to find out whether that is what you are looking for .

Problems with query via Database-Link (Oracle 7.3.4)

I made the following simple query via database-link.
select count (*) from [email protected]
I got the result in about 200 miliseconds.
Then I4ve tried the following query.
select * from [email protected]
It took about 2 hours end ended with an error message "ORA-03113: end-of-file on communication channel"
So I made another choice
select * from [email protected] where rownum <=1
Took about 200 miliseconds.
So I made the query again an changed only the number of rownums,until I was at rownum <=8
then it went sleeping again(I've canceled the statement because I didn't want to wait 2 hours again).
We made the same things from another server with the same database-link on the same remote server
and we had no problems.
Any Idea???

No, network is OK!
Other links are running, I have also no problems when I connect directly to the remote server.

Mail problem with embedded images and links

Since Yosemite Apple Mail seems to have a problem with images that are used as a hyperlink to a website.
While links are clickable with external loaded images work fine, links with embedded images just do not anything. Clicking on them selects them, a double-click opens the image in Preview.
This works:
<a href="https://www.google.de"><img src="https://www.google.de/images/srpr/logo11w.png" alt="Google Logo"></a>
This does not work:
<a href="https://www.google.de"><img src="cid:logo_google" alt="Google Logo"></a>
Can you reproduce this problem?
We tried it with OS X 10.10.1 and 10.10.2

After a bit of digging around I think I have found the reason for the EO being called prior to the CO. In the parent page CO, there is a transaction commit (oapagecontext.getApplicationModule(oawebbean).getTransaction().commit();).
Therefore, I assume that as my custom AM is a child of standard AM where the transaction is being commit, the child AM is sharing the same transaction/session and hence the EO being called.
I am running into issues with moving the validation to the EO as the validation requires visibility of the VO values to calculate a total value. Therefore is there a way to ensure that my custom AM maintains a separate database session/transaction to the parent/standard AM? Is it possible to break the parent/child relationship?
This way I assume that the commit issued by the parent page CO will not affect my custom AM/EO.
Cheers.
Jon.

Problems with Airport and Ethernet cable

Hi
I wonder if anyone can help please, i have a really annoying little problem with my Airport Extreme. I use the internet either at my friends through his wireless internet or at an internet cafe via their ethernet cable.
Recently I keep getting an error message up every 20 seconds or so that says 'Could not find a PPPoE server' and i have to click connect in my built in ethernet settings before the cable or even the wireless internet connection works again and this is getting really frustrating. Is there any way to restore my internet connect settings so that using airport and plugging an ethernet cable in will be a bit more straight forward.
Any help that you can give me would be very much appreciated.
Many Thanks
Dave

Hello davehtaylor. Welcome to the Apple Discussions!
Recently I keep getting an error message up every 20 seconds or so that says 'Could not find a PPPoE server' and i have to click connect in my built in ethernet settings before the cable or even the wireless internet connection works again and this is getting really frustrating.
Is it possible that you have PPPoE enabled in either or both your AirPort and Built-in Ethernet settings on your Mac? If so, you should only need to disable them to remove this warning.
o AirPort: System Preferences > Network > Show > AirPort > PPPoE > Connect using PPPoE (disabled)
o Built-in Ethernet: System Preferences > Network > Show > Built-in Ethernet > PPPoE > Connect using PPPoE (disabled)

Problem with Airport Express & D-Link 615 Router

Hi there, this is my first post on the Community but as I am buying more Apple products I decided to sign up.
I have a D-Link 615 wireless router which would not broadcast far enough to the other side of my house (open plan) so I ran a cat 5 cable and connected up my Apple Express to give wireless to this area. This has worked very well up until a few days ago when I upgraded the firmware to V.7.6.4 on the AE. Since then I have lost the wireless from the A.E. and despite resetting and reconfiguring it I cannot seem to get it to work as it was.
The A.E. Utility is telling me that it cannot find the wireless network once it has updated, but doesn't seem to have a problem recognising the network name when I am initially configuring the unit. I have tried just about everything I can think of but to no avail, even plugging the A.E. into the router via another port and Ethernet cable but still with the same results. I thought that it (might) be a security issue so turned of the D-Link wireless security but still no result.
The strange thing is that it WILL 'create a new network' without any problem and broadcast at full strength!
Anyone have any ideas???
Many thanks

Hi Joe,
You got the short answer from
b Henry B,
which will save you lots of aggravation.
But if you're as curious, as I was, here's some more info I came across. I thought naively that a simple wireless 'repeater' would be straightforward and would work across different vendors of wireless basestations.
Maybe it would? But the Airport Express implements something called a
b Wireless Distribution System
b (WDS),
which sounds to me more complicated than just a simple wireless repeater. Maybe it has something to do with also honouring the encryption in the wireless signal to be repeated, err extended? Apparently WDS implementations are not standardized and currently
b rarely
work across different brands of wireless basestations.
Although apparently several folks have been successful extending the range of
b linksys
brand wireless basestations using an Airport Express,
b IF
they first update (swap out?) the linksys firmware with another (open source) version. Whew!
Anyhooow, for your situation, a brute-force option might be to replace the Ethernet cord between the Rogers cable modem and the D-LINK with a longer cable, so you can move the D-LINK closer to Living Room. (Or possibly get a longer CATV cable and move both the cable modem and D-LINK). You could even try increasing the range of the PowerBook with one of those Quickertek antennas.
But I expect it would be
b cheaper and easier,
if it came to that, to just replace the D-LINK with a 2nd Airport Express, which would then inter-work with the Airport Express in the Living room, using
b WDS.
best of luck,
...ben

MBP 5.1 I have a recent problem with airport connectivity. ethernet connection is working fine, but wifi has become extremely slow and bad functioning. signal is received, no problem with the wlan (my husband 's wifi with MBP is perfect) please help

I have a MBP 5.1 with snow leopard 10.6.8. It has been working fine until few days ago, when it started to have different problems:
1) airport is not working well. it is extremely slow, has difficulties in fully loading pages, looses connectivity, It is not browser related, behaves thesame in safari or firefox; it is not the router/wlan; my husband mbp wifi works fine (as it was mine...) and iphone wifi is also working fine. it sees the signal and different networks. , it is also very very slow in opening skype (after that, it is working ok) if I connect via ethernet cable to the same router, everything works perfectly and with the correct speed.could it be a damaged airport card? a software problem/corruption? logic board? (I hope not, the computer is out of apple care now....)
2) after a certain time (more than hours) of use, the trackpad is behaving strangly, increase sensitivity to touch, unwanted selection of folders, files and text or images in web pages when i move the cursor, the cursor jumping all over the places while writing, ecc I have the impression it starts doing that when I use heavily the CPU ( and the temperature goes up). Is this again a problem of the mother/logic board?
I had recently serviced it since it was not booting properly, but except some permissions repaired, they did noit find anything wrong in the hard drive (which I have now substituted with a SSD) or other hardware.
thanks in advance for any help/suggestions
alessandra

I think I solved the wifi connection problem, just by switching off completely the router! sounds trivial, but in this case it worked!!!
the funny behaviour of the trackpad/cursor still persists. any suggestion???
thanks again

ILife 08- problem with Podcast and Blog links on landing page

Hello I have iLife 08, running OS 10.4.11. The Podcast and Blog links on my iWeb landing page appear but don't do anything. All was working fine one week ago. They load, and when you mouse over it the links looks like they are going to work but don't.
Any ideas on what the problem is?
thanks in advance for your time,
-g-

Hi Chad,
Yes. I had a similar problem. The 1st click on an iTunes hyperlink (i.e. http://phobos.apple.com/WebObjects/MZStore.woa/wa/viewPodcast?id=97154883 ) occasionally does nothing for me in Safari. And as you described, the 2nd click usually works. I actually didn't notice the Safari window containing the link closing itself. I'll keep an eye out for that.
I'm running iTunes 6.0.2 with 2.0.3. See if running an update changes anything for you.

Problems with template and page links..

Hello community!
I'm pretty new to dreamweaver Cs4 and am having a slight problem. I have my template.dwt file and 5 other pages which use this template layout. However when I preview my website in my browser, the template.dwt file links to all the pages, however when I click on another link (a page link) once on this page, the hyperlinks from the navigation cant be clicked. In other words the navigation turns into just text and no hyperlinks.
I want to be able to click on any page on my website using the navigation bar, so i can go back and forth onto pages all over my website using my navigation.
Anyone know what to do or a solution to allow me to have all the links working from the template
Thanks

You are being confused by a) not understanding root relative vs document
relative links, and b) not understanding how DW previews files.
If I have a document with a link to an image that looks like this -
<img src="/images/foo.gif"...
That's what's called a root relative link.
If I preview that document in DW, then the browser gets the document, sees
the leading "/" and reads that as the root of the hard drive, since the
browser has no idea where the root of the site is. Thus, the image is
broken in the preview.
If I have temp files enabled, then DW will secretly convert the file being
previewed into a temporary file, and hand that to the browser. This temp
file has had all root relative links converted to document relative links
(as you will see by looking at the code in the browser), and has had all
include files actually embedded in the page, and has had all external CSS
and js markup embedded in the page. In other words, DW has made the
document into a stand-alone page.
If you do not have temp files enabled, all of these links would be broken on
preview.
Now - if you are using root relative links, AND you have temp files enabled,
AND you click away from the previewed document, then all of your links will
be broken, since DW has not made that linked file into a temp file. This is
what you are seeing.
So - if you want to click away on preview, then you must use document
relative links for the site -
<img src="../images/foo.gif"... (for example)
These will still work on preview since the browser knows how to determine
the current file's location and how to follow that path.
GEDDIT?

Problems with encoding when creating link in mail

A user inputs some text in a field at a webpage.
From this I build a mail that has a link that looks like this:
http://www.domain.com/a/controller/action/?name=[INPUT VALUE]
My problem is that when I try to get the value in the receiving action, using params.name, it does not so good. The real problem is about odd characters like our swedish �,�,� for example.
What I have tried to do when building the link is to use URLEncoder.encode([INPUT VALUE], 'UTF-8') and then using URLDecoder.decode(params.name, 'UTF-8') but it does not work at all. Is there any other way I should attack this problem?

def name = "Mattias Sands�ter";
def email = params.email;
name = URLEncoder.encode(name, 'UTF-8');
println(name)
def message = http://domain.com/a/b/download/?name=" + name
MailSender.sendMail(email, "Subject", message);{code}
{code}def download = {
println(params.name)
println("download after decode" + URLDecoder.decode(params.name, 'UTF-8')){code}
The first println looks fine, it says Mattias+Sands%C3%A4er
The second println looks horrible, Mattias Sands��ter
The third looks the same.
Then I send this to my gsp(jsp) page and wants to put this in a standard textfield, but it of course looks like Mattias Sands��ter there too.
This is on a linux-server, on my local computer, everything works as expected.
Whatever it its, something happens to the name-variable when it is clicked on in the e-mail. It looks good in the e-mail, get pasted in the address-field in the browser correctly, but when retreiving the variable with params.name it is screwed
Edited by: sandsater on Jul 8, 2008 8:44 AM

Problems with LAN RJ45 Ethernet link on Tecra A8-PTA83E

Similar Messages

Maybe you are looking for