Problems with latest drivers for Audigy 2

Here is my problem: I have tried several times to install the newest drivers. However my sound card doesn't install correctly. I dl'ed the drivers and the dvd-audio .exe thinking the dvd-audio is what I needed. It wasn't. The dvd-audio program gives me a error message saying no device is found. Going into the control panel --> sounds and audio settings, shows I have no device installed. Likewise in the device manager the little yellow "!" is there, and windows says multimedia audio controller, nothing more. However, if you try to install drivers, you will get a message saying drivers for the device are there, and will be uninstalled to continue installation. Um, what gives? Am I doing something wrong? The original drivers work and so do the beta AL drivers but the latest I can't get to work.... :smileyindifferent:

The card should have come with a CD. Did you contact your supplier or the store where you got the card, to see if they have the CD for you?
Cat

Similar Messages

Problem installing lastest drivers for Audigy

I have installed the drivers (.04.0060) which came on the disk supplied with my Sound Blaster SE card and the card works perfectly but if I try to install either of the drivers below I have problems:?The drivers below will not install properly and the sound malfunctions - no EAX and a cracking sound. [color="#3300ff">Creative Sound Blaster Audigy SE and Audigy Value Driver 0.04.006 and Creative Basic Audio Suite 55.4 )? 20 Apr 06?The drivers below will install and the sound seems to work fine but when I run the sound card diagnostics it reports a problem with Directsound. [color="#3333ff">Creative Sound Blaster Audigy Value/SE/LS and Sound Blaster Li've! 24-bit XP and Windows Vista Pack .04.0077 (63.39 MB)?9 Jul 07?Has anyone else had problems with these drivers and is it really important to install the newer drivers?Details of my system are as follows:?P4HT 3.0 GhzWin XP Home SP2 GB system memoryNvidia Geforce 7600GS 52MBLogitech X230 2. Speakers?Thanks.

try to download drivers from here

Latest drivers for audigy ca

Hello i have installed the latest drivers from this site. but i think the new drivers messed up te decoding of cmss. i dont hear nothing from the center and other four speakers are the same as the front speakers. why cant they make drivers that its works and the latest drivers has a delay in it of 3ms please fix it

hello
i got a audigy player (D400) and i got a dtt2200. all sounds are great if i install it from the cd. but if i get te latest drivers of it.
The cmss upmix is a little bit confused it's like there is no upmix at all it's like hearing 6 channels to same.and the center louds to soft and it has no surround. if i play games it's working great if i play movies it workig 00% but if i play music from winamp or mediaplayer it has no surround only like a 4. speaker set. do you think this is a problem with my speaker set or soundcard. i am confused when i install it from the orginal cd it's working all fine but, newer games won't work with older drivers.
please help meMessage Edited by Yoshi05 on 06-22-2005 07:02 PM

Problem with islsm drivers for my wifi card

Hello! I'm using stable version of Arch Linux with newest beyound kernel (2.6.19 AFAIR) and trying to compile islsm drivers for my wifi pci card.
I've downloaded source like it is showed in http://prism54.org/punbb/viewtopic.php?id=1557 and cut headers like it is showed in: http://bbs.archlinux.org/viewtopic.php? … +directory
(i used 'sed -i /linux.config.h/d *' because i didn't compile kernel by self and make searches config file).
Unfortunately after make load i get:
make -C /lib/modules/2.6.19-beyond/build SUBDIRS=/home/radious/islsm MODVERSION=/home/radious/islsm/symbols MKPWD=/home/radious/islsm modules
make[1]: Entering directory `/usr/src/linux-2.6.19-beyond'
Building modules, stage 2.
MODPOST 4 modules
make[1]: Leaving directory `/usr/src/linux-2.6.19-beyond'
FATAL: Module firmware_class not found.
FATAL: Module relayfs not found.
FATAL: Module crc32 not found.
Could anybody help me with this problem, any advice is welcome.
Thank you.
EDIT
Ok, there was no problem:) It's enough to copy *.ko files /lib/modules/KERNEL/misc and load them by modprobe.
This thread can be deletad, thank you.

Hi: Unfortunately, the support pages are not working for most of the newer HP PC's. It has been that way for about a day now. Since I am not employed by nor do I represent HP, I am not sure when they will have the pages working again. Check back again some other time. With the Independence Day holiday weekend in the USA, I would not expect this to be taken care of immediately.

?I am getting an error when installing on my dell inspiron with latest updates for drivers. Error 1406. I have the problem with Scan Snap software and a full version of reader.

?I am getting an error when installing on my dell inspiron with latest updates for drivers. Error 1406. I have the problem with Scan Snap software and a full version of reader.

Error 1402 | Error 1406 | Acrobat, Reader

Downgrade to win7 problem with audio drivers. beats audio software for win7?

I recently purchased the HP Envy 700-074 from best buy. it was necessary to downgrade to windows 7 for some work software and I would like proper audio drivers/software for windows 7. Right now it seems to be detecting as Nvidia audio driver but in this case it doesnt allow my front panel audio ports to output audio. I would also like to have beats working.
here are the hardware ID's associated with the card
HDAUDIO\FUNC_01&VEN_10DE&DEV_001C&SUBSYS_38423619&REV_1001
HDAUDIO\FUNC_01&VEN_10DE&DEV_001C&SUBSYS_38423619
and here's a quick screenshot of the driver that is associating with it right now..
http://gyazo.com/23499c19d5e2a21f81b9124ad822c07d.png
even those VEN_10DE's seem to associate to nvidia, but from HP the driver is meant to be IDT high definition audio? is something going on here?
the only change i've made to the computer is upgraded to an EVGA Nvidia GT 610 video card.,

Hi, Paul.
I have similar problem here.
I bought HP Envy 810-200nr and I hate W8, so I installed Windows Server 2008 R2, which is my favourite.
Then I solved numerous problems with chipset drivers and finally it all works, but Audio (IDT HD Audio) does not work.
Completely silent.
HDAUDIO\FUNC_01&VEN_111D&DEV_76C7&SUBSYS_103C2AF3&REV_1001
HDAUDIO\FUNC_01&VEN_111D&DEV_76C7&SUBSYS_103C2AF3
It looks okay, when playing audio - indicator blinks and shows level, volume can be adjusted, all parametrers - speakers, etc seems okay but silent!
I tried numerous drivers for W8 and W7 64 but they give "Incompatible version" error.
Can you advise me what to do? I really want WS2008R2 here, but this audio is weird..

Notebook NC6400 HSTNN-C18C problem with grafic drivers

hello i have
NC6400 HSTNN-C18C and i have problem with graphic drivers.i have windows 7 proffesional i found some .but in install has failed installation .i have installed game Farming simulator 15 but i still must install latest graphic drivers.can you send me link where i download drivers thanks for help

Hi,
It's a good machine isn't it. Unfortunately no official support:
http://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=1848274
Please try:
http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/compaq-nc6400-drivers-for-windo...
Vista driver on the first link may help.
Good luck.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Qosmio X300-130: Problems with some drivers in windows 7 64 bit.

I have installed normally in my laptop windows 7 64 bit version. Before I continue with my main problems I am in the forum for answers and I found this [post |http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=232906&#232906] . How can I see if have a 32 or a 64 bit BIOS? If I have a 32 how can I make it a 64?
And now my problems:
1. I have installed a 64 bit sound drive for windows 7 of Realtek the version 6.0.1.6392 and it only recognizes the 2 speakers above the keyboard. How can I fix this?
2. My media controller manager is not responding with the drivers for windows 7 64 bit. Should I have the bluetooth on? I tried with media player and VLC and it wasn't responding. How can I fix this?

>How can I see if have a 32 or a 64 bit BIOS? If I have a 32 how can I make it a 64?
Start the notebook and press F2. Then you should be able to access the BIOS.
There you should see the version number. Furthermore you can download the latest BIOS from the Toshiba European driver page.
>1. I have installed a 64 bit sound drive for windows 7 of Realtek the version 6.0.1.6392 and it only recognizes the 2 speakers above the keyboard. How can I fix this?
The notebook supports the speakers: main x2 + tweeter x2 + woofer harman/kardon
All speakers are controlled by sound chip. So you need to install just the Realtek sound driver.
Further settings can be found in control panel Realtek HD audio manger.

Problems with Photoshop cs4 for the Mac

I am having all kinds of problems with Photoshop CS4 for the Mac. When I boot the software it seems to work for a while then, I am unable to open upf a file in Photoshop. I drag a photoshop file over the application icon, the whole screen flickers and nothing happens. I am unable to quit Photoshop as the quit choice is grayed out and command-q will not make it quit. I have to force quit. I can repeat this pattern over and over. What is happening? How do I solve this problem?
--Kenoli

Thanks for the reply. I am using Photoshop 11.0.1. I am using the latest version of Snow Leopard. I have found both Photoshop and Dreamweaver to be pretty buggy for several versions now. My suspicions were that they were really engineered for Windows and never really fully implemented for the Mac. Dreamweaver crashes or hangs on me three or four times a day if I us it all day and does various annoying things like refusing to respond to the delete key after I have used it for a while. I have pretty much stopped using it to some degree for that reason and also because there is other software that does a lot of coding things I do much more directly and simply. Also Dreamweaver always seems to struggle to quit when I tell it to quit (that is, it takes a long time and gets hung up at places before it quits) and once it does quit, I always get a message saying that it has unexpectedly quit (even when I have told it to quit).
The problems with Photoshop (starting with just taking a long time to load) have escalated to the point I described today, which makes it almost unusable. I just reinstalled Snow Leopard to see if there was anything buggy in the system software. I will report if problems go away.
Regarding both the refusal to open image files and the grayed out quit command, made me think something like you, i.e. there was some dialogue box open somewhere. However, I couldn't find anything and I don't use two monitors.
So . . . Adobe just seems to be getting more expensive and more buggy.
Incidentally, why is it still running in Rosetta rather than natively? Adobe now has a real Intel processor to work with.
--Kenoli

If there is a problem with the wifi for i pod touch or i phone like i have read just like the problem with mine wilix for this problem l there be a f

i pod touch wifi works for few minutes then goes off seems lots of people having same problemsif it is a problem with latest software updates apple should put this right.
how can i find out if it is something to do with software or it is problem with i pod touch 1stg if it is software problem apple need to fix it or give me some money back.
i have wrote about this before and some people have e mailed me over this but i can not mail them back because when i e mail them i get pop 3 failier
any got anyinfo about this or any fix it updates coming
thanks slobber

Do the filenames contain special characters, like "ä,ü,..." or white space or are the vry long? Is there anything special about the image format? Try to export the edited versions in that case and reimport it with a different, shorter filename.
For testing, create a new book with only the images you want to check.
If this does not fix it, try rebuilding. Depress the option and command keys, launch iPhoto and rebuild the library.

Problems with graphics drivers

Hello, I tried to install new drivers to my Ati 6770m (2gb) and there is a problem with almost every driver. For example the newest ati catalyst 14.5 beta. When the driver is installed, I can't switch to the resolution higher than 1024x768. Ati catalyst control centre is not installed or I there is an error message saying, that the driver is not installed correctly so the control centre can't open. Sometimes the system crashes to the blue screen and I have to reboot. I see this problem with various drivers. The only driver, that is working for me is Ati Catalyst 13.10 mobility beta. And with this driver there's a lot of graphic problems with GTA V. I see squares on all objects in distance when dx11 and AA is turned on. It is unplayable with this driver. Please help.

Hey @Tommy2220 ,
Thanks for the additional information. If you uninstall all that you have in the graphic drivers section of the Device manager, including the drivers that are present. Restart the Notebook, and download from here. You will only need AMD/Intel Switchable High-Definition (HD) Graphics Driver, it includes everything you will need.
You can also find them , here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system.
Hope this helps you out.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Problems with ATI drivers and gnome3?

I've tried to install gnome3 off of the gnome-unstable repo (sudo pacman -S gnome-unstable/gnome gnome-unstable/gdm I'm assuming that's the proper command). However, when GDM starts, my screen just flashes a cursor, goes blank, turns off, and repeats. Is there a problem with ATI drivers or is the package just not working at all right now?

I'm also having troubles with Catalyst and gnome3 (I'm ussually in i3 btw) just playing with it tho. Seems to detect my graphics as 'VESA: JUNIPER" which probably means it's using some sort of fallback, eitherway it's not very functional and messes with my X server a bit
EDIT: I can get into gnome, but there's a lot of flickering doing anything, should proabaly check for bugs on their tracker
EDIT2: https://bbs.archlinux.org/viewtopic.php … 89#p913189 <--- looks like that might be gaining some traction, something to watch
EDIT3: This bug and This Bug might be relevent, not too recent tho
And another one
so yeah..... ATI
Last edited by jmad980 (2011-04-07 07:37:21)

I have been a loyal customer for years and have a hot spot because internet options are very limited in our rural area. I have stayed with 10G since the beginning. Most months I don't use the 10G. Verizon has no problem with me paying for Data I don't

I have been a loyal customer for years and have a hot spot because internet options are very limited in our rural area. I have stayed with 10G since the beginning. Most months I don't use the 10G. Verizon has no problem with me paying for Data I don't use. This month my daughter comes home from College and she accidentally uses 24G.....14 over get blind sided with $140.00 in overages. I called Verizon today......stopped in to the store today......My neighbor told me they waved charges for her one time. Lots of charges.....But I'm am getting no help. Not even an offer of a payment plan to help me out. I went back just 6 months and I have over paid for 19G.....Seems like they would like to help out their loyal customers!!!! Does anybody have any suggestions on how to deal with them? We are not wealthy....or I would just pay this and walk away......

There is a big misconception in what customers believe a cell carrier is obligated to do.
You pay a set price to use up to that amount of xx data. It makes no difference if you use it to the paid limit or way under. Its like peace of mind when you don't have to worry about a data counter.
Your daughter used the data, your plan is quite clear of what overage charges are. Why should or would Verizon wireless just forgive the charges because you are a customer? Your daughter used the data, get the money from her. That is the responsible thing to do.
There is no "I have been a loyal customer so please remove the $120, or $250, or $2,000.00 since I did not mean to use it"
Your electric company, or gas company or any other company does not remove valid charges. Why should Verizon wireless?
Just pay the invoice and don't think you are being mistreated because Verizon is a business and not a charity.
Good Luck

Hi, recently i bought macbook pro with retina display and installed windows 8 professional original software also. but in windows 8 track pad is not working properly. can you help me with providing drivers for trackpad to work on windows 8 professional .

hi, recently i bought macbook pro with retina display and installed windows 8 professional original software also. but in windows 8 track pad/ TOUCHPAD is not working properly. can you help me with providing drivers for trackpad to work on windows 8 professional .

Did you download and install the Windows Support software? If you did, did you use the Boot Camp Control icon to set up the trackpad how you want it?
http://www.apple.com/support/bootcamp/
https://discussions.apple.com/community/windows_software/boot_camp

Need the latest drivers for a Deskjet 895Cse inkjet printer

I wanted to download and install the latest drivers for an HP Desket 895Cse inkjet printer but the only driver updates that are available on your website are for an HP Deskjet 895Cxi. I've never owned an HP Deskjet 895Cxi inkjet printer; only the HP Deskjet 895Cse inkjet printer. Do these two models use the same set of drivers or does your website no longer offer updated drivers for an HP Deskjet 895Cse inkjet printer?
I'm planning to address various sized envelopes for Christmas cards which I have done in the past using my older model HP Deskjet 895Cse inkjet printer because my current HP printer; an HP C5280 Photosmart All In One inkjet printer will not allow me to print on odd sized greeting card envelopes; only standard sized business envelopes like a No. 10, No. 11 and a No. 12.
Last night I ordered new inkjet cartridges for my Deskjet 895Cse inkjet printer; a #23 color cartridge and a #45 black cartridge; both cartridges set me back about $70.00 after applying discounts and using a promo coupon code from HP. I spoke to someone in tech support overseas yesterday who advised me to download the most up to date drivers for my Deskjet 895Cse inkjet printer before I install the new cartridges and begin to address my Christmas card envelopes; about 75 envelopes; front and back.
If there are no new drivers available for my Deskjet 895Cse inkjet printer should I plan to return my new HP inkjet cartridges once I receive them because if my Deskjet 895Cse inkjet printer will not allow me to print on anything unless I install the latest set of drivers for my Desket 895Cse inkjet printer and if there are no new drivers currently available on your website I might as well return my newly ordered cartidges as soon as I receive them by Fedex from HP and get my $70.00 back. Feedback on this would certainly be appreciated.
Stevoreno
12/10/13

Why doesn't the website list the latest drivers for an 895Cse? Was the Deskjet 895Cse inkjet printer released for sale to the public before the Deskjet 895Cxi inkjet printer or visa versa? Basically what's the difference between the 2 models? Finally if I were to install my new cartridges which haven't arrived yet and choose not to install the drivers for the 895Cxi model will my 895Cse printer still work and be able to print?
Stevoreno
12/10/13

Problems with latest drivers for Audigy 2

Similar Messages

Maybe you are looking for