Problems with latest upgrade from overdrive media

I think I need to uninstall overdrive media...the latest upgrade is creating havoc with my ability to download books from the library. It used to be easy, but now my device gets stuck in continuous download mode that never stops attempting to dowload something that appears to be finished. I have a 4th gen. Ipod touch. How do I uninstall it?

When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Similar Messages

TS1717 are there problems with iTunes upgrading from Vista to Windows 7?

are ther problems upgrading iTunes from Vista to Windows 7?

The best method is to use Windows Easy Transfer first to backup all your data, and do custom clean install. And install all your apps and drivers afterwards.
Yes it should work. Make sure you are ready, and have all the latest drivers and applications ahead of time.
There are some "gottchas" with the upgrade from Vista.

Problem with PRD upgrade from 4.6C to ECC 6.0

Hello,
I'm experiencing a problem with our live Productive system, and hoping for some ideas on how to resolve. First, we have successfully upgraded our DEV and QA environment, and are now upgrading PRD. I was successful in getting through the uptime SAPup of our downtime minimized upgrade. Note that I did not need to log into the Shadow instance at all, because all modifications will be transported from DEV during downtime.
However, I did want to log into the Shadow instance to take a look at it. I first had to start the instance in the SAP Management console, and then when I attempted to access via the SAPGUI, I recieved error "Internal TSKH error. Session terminated". Also, I noticed that as soon as I started up the Shadow instance, I am now getting "SYSTEM_CANT_CLEAR" short dumps every minute. Error says: Error when initializing the work area "SYST".
Since I don't need to log into the Shadow instance to complete the upgrade, I'm not sure if this is going to be an issue for me or not while I complete the upgrade.
Any assistance would be greatly appreciated.
Thank you,
Leeanna Travis

Hello,
I'm experiencing a problem with our live Productive system, and hoping for some ideas on how to resolve. First, we have successfully upgraded our DEV and QA environment, and are now upgrading PRD. I was successful in getting through the uptime SAPup of our downtime minimized upgrade. Note that I did not need to log into the Shadow instance at all, because all modifications will be transported from DEV during downtime.
However, I did want to log into the Shadow instance to take a look at it. I first had to start the instance in the SAP Management console, and then when I attempted to access via the SAPGUI, I recieved error "Internal TSKH error. Session terminated". Also, I noticed that as soon as I started up the Shadow instance, I am now getting "SYSTEM_CANT_CLEAR" short dumps every minute. Error says: Error when initializing the work area "SYST".
Since I don't need to log into the Shadow instance to complete the upgrade, I'm not sure if this is going to be an issue for me or not while I complete the upgrade.
Any assistance would be greatly appreciated.
Thank you,
Leeanna Travis

My problem with Toplink upgrade from 2.5.1 to Release 2

Hi:
I met some confusions in upgrading our system from TOPLINK2.5.1 to TOPLINK Release 2(Oracle9.0.3).
And because I didn't use TOPLINK tools before this project, I spent one week to know the structure of our system. Unfortunately, Our company isn't a supported Oracle customer. We just bought Oracle product, didn't buy support service.
First of all, I'll describ our system structure. The system is Weblogic5.1 + Toplink 2.5.1 + Oracle8.1 .Using Toplink we mapping our EJB to Oracle. The results of this procedure aremany .table, .descriptor, .topclass under the mapping forlder, and weblogic-ejb-jar.xml, topling-cmp-XX.xml, ejb-jar.xml under the deploy forlder. That's all.
So, after our ant-build, we copy these results to Weblogic server directory, and compile with EJB, deploy them. It's correct?
OK, as my considering, I install TOPLINK Release 2 , use Renamer tool to rename my source code from old TOPLINK library to oracle.toplink, complie them again. And create new project in TOPLINK 9.0.3 , import classes, login Database correctly. Do mapping as in TOPLINK2.5.1. Generate packagename.ClassDescriptor.xml under Descriptor, forlder ClassRepository, Class, Table, Database generate xml files also.
Do the above process correct? OK, let's assume it' correct. But how can I modify my ant-build , you know the structure is difference between Weblogic 5.1 and Weblogic 6 or 7. Additionally, I don't know where should I copy new TOPLINK library to Weblogic directory. Yes, I know old TOPLINK library location, but I think it has difference.
So , please tell me I can use Weblogic5.1 + TOPLINK 9.0.3 + Oracle 8.1 , is it right? I will be appreciated if you can give me some detail steps in upgrading TOPLINK.
And perhaps we need to upgrade out system from TOPLINK 2.5.1 to TOPLINK 4.x first?
Thanks for your view.
Yours
Denver Yang
Software Engineer

Hello Denver,
If you are using CMP Entity Beans then TopLink 903 supports WebLogic 6.1 and 7.0. You would have to upgrade your WebLogic version at the same time you upgrade TopLink.
If you are using Java Objects (not CMP Entity Beans), then you can use any version of any app server with TopLink.
If you migrate from 2.5.1 to 903, you can send your project to support and they will update it. If you are not a supported customer, then you will have to do this manually (meaning you will have to remap in 903 from brand new).
You are correct that your build process will be different when you migrate, but this will be because of how WebLogic has changed deployment and how the EJB spec has evolved moreso than anything to do with TopLink. How to do deployment in 903 should be in the TopLink 903 docs.
Hope this helps,
- Don

External Hard Drive Problem with latest Upgrade

Since my lastest software update on my mac mini (the most recent, only a few days ago), my external hardrive has been reading (loudly, this is the problem) a chunk of data, about a MB or so, to the processor every 60-90 seconds. none of it is being written. there's no CPU usage (i just watched the activity monitor for a while). It happens even more frequently when I'm using itunes (stored on the Ex HD).
My hard drive is a LaCie with firewire connection.
Any ideas, anyone?
Thanks.

JOrdan,
You write that everything functions as normal with the external drive disconnected.
Then (if I am surmising correctly) when you reconnect the external drive., the problem returns.
From this, I infer that your computer, without the external drive, is perfectly able to perform all of its functions.
But there is something on the external drive that requires some of these functions to be performed on it - a file of some sort that is set to be regularly checked and updated in some way.
So it sounds to me as if you might want to take a look at everything you have on the external drive, and try to pin down that one thing that is asking the computer to do work on it.

Problem with import files from windows media player into iTunes

When I have tried to import my .wav lossless files created under windows media player into iTunes I use File, add folder to library but when the action is completed I get all of the files under the heading 'unknown album' with 'unknown artist'.
Does anyone know that I need to do in order to include the artist and album ?
Many thanks,
John.

You'll first need to add the MP3s to your iTunes library since the iPod is not compatible with Windows Media Player. You can use, for example, the File > Add to Library menu to do this.

Good day I need the solution to the problem presented my iphone with ios upgrade from 7 to access any app, I get a message that says "log on to itunes to receive notifications"

Good day I need the solution to the problem presented my iphone with ios upgrade from 7 to access any app, I get a message that says "log on to itunes to receive notifications"

After the iOS 7.0.2 update words with friends is not working for me either. When I attempt to open the app it just closes itself after a few seconds of being open. This happens every time I attempt to open it.

Problem with latest version of firefox 15.0.1,whenever i download video from youtube or any other site using idm it shows .webm format instead of flv or mp4.

problem with latest version of firefox 15.0.1,whenever i download video from youtube or any other site using idm it shows only .webm format to download instead of flv or mp4.previous version works fine.also other browsers work fine.

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"
*http://kb.mozillazine.org/Cookies

I want to upgrade from Tiger to Snow Leopard on my 2008 MacPro. How do I avoid problems with the upgrade process?

I want to upgrade from Tiger to Snow Leopard on my 2008 MacPro. How do I avoid problems with the upgrade process?

#1 Do a complete bootable backup of your drive before upgrading. That way should anything happen you can revert back to the start and try again.
Make sure you meet Snow Leopard 10.6 Technical Requirements - http://support.apple.com/kb/SP575
You might also want to make sure you don't have software issues with SL:
A Mac OS X 10.6 Snow Leopard Application Compatibility List - http://snowleopard.wikidot.com/

Cannot finish a sync w/books from overdrive media

I recently upgraded my IPOD touch to IOS 5.0.1 and iTunes 10.5.1.42. I use Overdrive Media Console version 3.2.1.0. Since upgrading my ipod to IOS 5.0.1 I haven't been able to completely sync a book I've transfered from Overdrive Media. Part of the chapters come through and sync then the remaining chapters appear in the book section of the IPOD but upon trying to sync, a message stating my touch could not be synced bcz the sync session failed to start. Updated to the iTunes 10.5.1.42 and Overdrive Media yesterday. I have also uninstalled/reinstalled iTunes, restored IPOD to factory settings, turned off iCloud back-up and nothing seems to help. This is so very frustrating! Anyone have a solution?

I have almost the same problem
I have to use my wifes ipod with verision 4.2.1 it works fine works fine
I recently upgraded my IPOD touch to IOS 5.0.1 and iTunes 10.5.1.42. I use Overdrive Media Console version 3.2.1.0. Since upgrading my ipod to IOS 5.0.1 I haven't been able to completely sync a book I've transfered from Overdrive Media. Part of the chapters come through and sync the chapters appear in the playlists
I have also uninstalled/reinstalled iTunes, restored IPOD to factory settings, turned off iCloud back-up and nothing seems to help. Also frustrated!
Anyone have a solution?

Audiobook transfer from Overdrive Media Console to iPod Shuffle. Error message 0x800402:

Trying to download audio book from Overdrive Media Console to iPod Shuffle. Error message 0x8004002: Overdrive Console requires iTunes v9.0.2 or newer. iTunes. iTunes website says I have latest version. Overdirve has been transferring audio books just fine until today.

I need help with this also. I was fine until I updated to iTunes 10. Please advise!!!

I have trouble transferring audiobooks from Overdrive Media Console.

I have trouble transferring audiobooks from Overdrive Media Console. Sometimes the book does not transfer. Sometimes it winds up in music.

I agree that transferring audiobooks to an iPhone using Overdrive is very flaky. My biggest issue now is that when I do a transfer, about every 3rd or 4th segment doesn't transfer successfully. I have to go back and select those and transfer again and then they are out of order with no apparent way to put them in the correct order. So when I start listening to the book, I have to closely monitor when I am at the end of a part so that I can manually select the next part.
My latest transfer of a book with 14 parts placed 2 versions in Audiobooks with the order 5, 12, 1, 2, 3, 6, 8, 9, 10, 13, 14. (missing parts 4, 7, and 11)
When I went back to Overdrive and selected parts 4, 7, and 11 to transfer, my iPhone then had a playlist with the book with the order 1, 2, 3, 5, 6, 8, 9, 10, 12, 13, 14, 4, 7, 11.
Crazy!!

Why am I having performance Issues with an upgrade from CS2 to CS5.5?

I am struggling hard with an upgrade from InDesign CS2 to CS5.5 (part of CS5.5 Design Standard)
There is a very slow response when trying to produce a 45 page document which needs many .jpeg images inserting, sometimes up to six on each 3-column page. While InDesign behaves sort of normally on text only pages, it slows to a virtual standstill when on the pages with images. (But this is what its for and I didn't have this problem with CS2!!)
Having read through some of the postings on this topic I have followed all the advice without success :-(
1) disable LSD in Preferences – Interface
2) disable thumbnail display in Pages
3) adjust view settings to Typical with Raster and Vector Images greyed out
4) disable Save Preview Images with Documents
5) check Links before opening documents
7) switch Preflight off
I shouldn't need to do all this should I???
I am operating with the following:
Packard Bell ixtreme M5740 64 bit
Intel Core i5 CPU [email protected]
4.0 GB RAM
ATII Radeon HD5570 graphics card 2779 MB available memory, 1024MB dedicated
plenty of free space – 274GB on c: drive and 296 GB on a D: drive
My hardware conforms to/exceeds the Indesign recommended hardware spec. Oh yes I am working on my local drive and I don't have these problems with Photoshop or Illustrator CS5.5.
Has anyone an idea about what's going on?
I've lost a good 6-8 hours so far trying to sort it out. Any help and observations will be gratefully received!

Hi Peter
Thanks - I've found that the files were marked as 'hidden' and thus by switching them on gain I was able to recreate the original location. Regrettably this has had absolutely no effect on my problem. :-(
I have now created a fresh document, studiously linking all my images properly (similar number to a DK 'Eyewitness Travel Guide') and by the time I got halfway through its 80 pages, InDesign had slowed to a crawl - ie 15-20 seconds to respond to any command. It is clearly doing something that it thinks necessary despite all the 'workarounds' people have suggested. Please please Adobe what's going on???

I have a problem with color prints from photoshop elements 12. The pictures are too light and with strange colors. I have a Canon pixma mg615I0 printer and use mac os X yosemite. The pictures are taken with a coanon eos 550d in the color space sRGB. I hav

Hi
I have a problem with color prints from photoshop elements 12. The pictures are too light and with strange colors. I have a Canon pixma mg615I0 printer and use mac os X yosemite. The pictures are taken with a coanon eos 550d in the color space sRGB. I have followed adobes recommendations and have tried both letting the printer respektive photoshop manage the colors. But nothing works. I see that there are different opinions about which is best to do so I tried both. I have the latest printer driver installed. Can anyone help me with this?

Do the following:
Print a test page from the printer. Perhaps the print head needs cleaning via its maintenance facility.
Let the printer manage colors, not PSE
Calibrate the monitor

Problems with auto upgrade Anyconnect 3.1

Hello,
I'm having problem with auto upgrade of Anyconnect 2.5 to 3.1.
Here is the situation :
I have ASA5510 running ASA 8.4.5 and clients are running Anyconnect 2.5.3055 and 3.1.00495 with 2 different profiles.
Clients with 2.5 can upgrade to 3.1 but then receive an "Invalid host entry" when they try to connect with new client. It works if they use FQDN instead of profiles. It's the same situation with Windows 7, Mac OS X and linux.
If I configure client software back to 2.5 on ASA, it works again for every client.
Do you have an idea ?
Thanks for your reply.
Yann

I have seen the same behavior on Mac OS X. A couple of points for me:
If I delete the profiles from /opt/cisco/anyconnect/profile then I can connect once (using the FQDN) but it then downloads the client profile and on next attempted connection it receives "invalid host entry." My profiles use the FQDN of my ASA and both forward and reverse DNS resolution are configured properly.
My workaround is to remove the AnyConnect Client Profile entirely, but I can get away with that because I have a very simple setup, with all users in one default group. If I had to pass different profile information to different users that would not be a solution.
Second, better workaround: I just exported the client profile, imported it under a different name, edited the new client profile to remove the server address, and assigned the new profile to the group policy. At their next login, users get all the profile settings and since the client remembers the FQDN they used to connect it doesn't adversely affect the user experience.

Problems with latest upgrade from overdrive media

Similar Messages

Maybe you are looking for