Problems with launching of Muse

When I try to launch or start Muse I get the stange alert that the computer is offline - and I am online.
Can anyone help with this?

Hi
Did you try some steps given in the following article
http://helpx.adobe.com/muse/kb/could-not-connect-to-server.html

Similar Messages

  • Problem with launching 10g express edition

    Hi, i am from Czech Republic and i have big problem with launching Oracle database 10g Express Edition.
    After instal program i launch "Go to Database Home Page" and IE write to me "Page not found" (web adress is http://127.0.0.1:8080/apex).
    Please,can anyone help me what i have to do to launch it correctly?
    Thank you.
    Message was edited by:
    user628210
    Message was edited by:
    user628210

    hi again. first a have to apologize. i have oracle
    database express edition 10g from school,so i dont
    have registered version.When I said 'register' I didn't mean have it licensed, Oracle XE doesn't require any kind of license registration, it is free. By registering it I meant a technical issue. Once the database is started it tries to contact the listener at 1521 port, once contacted the oracle instance registers itself against it, and if it is successful you will have the administrator's page initialized and ready to access at the default 8080 port.
    when i type SQL commands, command line wrote me
    SP2-0734:unknown command beginning ENTERED COMMAND
    Could you please specify which command did you try to enter?
    >
    and when i open RUN DATABASE, command line wrote
    C:\OracleDatabase\app\oracle\product\10.2.0\server\BIN
    net started OracleServiceXE - system error 5, accessdenied
    What do you mean with 'RUN DATABASE'?
    ~ Madrid
    http://hrivera99.blogspot.com/

  • Problem with launch VS2013

    Hello. I have big problem with launching VS2013. When try to launch have error
    Application Name: devenv.exe
       Application Version: 12.0.21005.1
       The time stamp applications: 524fcb34
       Name of the module with an error: StackHash_5861
       Version of the module with an error: 0.0.0.0
       The time stamp module with the error: 00000000
       Offset exceptions: PCH_A9_FROM_ntdll + 0x0003AAAC
       Exception code: c0000005
       These exceptions: 00000008
       OS Version: 6.3.9600.2.0.0.16.7
       Language Code: 1049
       Additional Information 1: 5861
       2 For more information: 5861822e1919d7c014bbb064c64908b2
       For more information, 3: 84a0
       For more information, 4: 84a09ea102a12ee665c500221db8c9d
    This topik don;t help
    https://social.msdn.microsoft.com/Forums/vstudio/en-US/9a8fc2ce-d741-4991-b012-6f0167183537/visual-studio-2013-proffesional-crash-when-i-trying-to-launch-it-devenvexe-c0000005?forum=vssetup
    Smb can help me?

    Hi,
    In order to resolve your problem. Please give us some information in detail:
    please use the command  line "devenv.exe /log" to collect the VS Starts logs. See the link to get more information about devenv command:
    https://msdn.microsoft.com/en-us/library/xee0c8y7.aspx
    And for better to troubleshooting your issue, I also want to investigate your VS setup log.
    Try to use
    http://aka.ms/vscollect to gather the installation logs. You will find vslogs.cab from %temp% folder.
    Please upload these logs file to OneDrive:
    https://onedrive.live.com/ 
    and share a link in the forum.
    Best Wishes!
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place. <br/> Click <a
    href="http://support.microsoft.com/common/survey.aspx?showpage=1&scid=sw%3Ben%3B3559&theme=tech"> HERE</a> to participate the survey.
    OFc..Look.Can;t use "devenv.exe /log" ,because error in that moment. Can;t use devenv.exe
    with any key

  • Has anyone out there experienced problems with launching apps after downloading the iOS 5.1?

    Has anyone out there experienced problems with launching apps after downloading the iOS 5.1?

    I tried calling support and they want to sell me $79 worth of support in order to get it straightened out!

  • Generic iViews in MSS- problem with launching in the general information

    Hi,
    My requirement is to display information with a custom query (display info from P0008) in the General Information.
    For this, we have chosen to work with Generic iViews.
    I have followed the following links:
    Link: [http://help.sap.com/erp2005_ehp_04/helpdata/EN/6c/9358f7d8dc43838e4f1135b9c37adb/content.htm]
    Link: [MSS Generic iView not working in General Information Page ]
    The problem i am facing is with Launching the iView Wizard and General Information provided in the 1st link. I am not able to continue with the pointsd under Portal Content Administration
    Thanks,
    Pinki

    Hi Siddharth,
    Thanks for the reply. But my query was not regarding ESS in MSS.
    Its about Generic iViews where you can fetch data using custom queries and user groups and display the same in the general information. I have attached the link provided by SAP below. There are mainly 3 parts to the config:
    1. Creating of custom query.
    2. Using FPM to add the generic iview for list to the perspective of the FPM appl of General information.
    3. Then creating the WD iview of the added view within General information from content Admin and then adding the WD page to the General information page.
    This is my comprehension of the steps provided. However there is one of the link within the Portal Content Admin that does not work.
    Please find the link from help.sap.com below:
    [http://help.sap.com/erp2005_ehp_04/helpdata/EN/6c/9358f7d8dc43838e4f1135b9c37adb/content.htm]
    Thanks,
    Pinki

  • Captivate 8 Course - Problems with Launch in LMS

    I created a Captivate 8 course with a PPT with animiation. Added audio to the Captivate. So far, so good. Uploaded it to our LMS (SuccessFactors). Went to test the course in the staging environment. Course looked like it was going to launch, then the entire screen went black. Anyone run into this problem before?

    Hi, Yes we are currently experience problems with our course in which the loading icon appears for the course.
    For some of our users, if you press the play button, the course will start and for some, clicking the play button has no reaction.
    Also, for some users, it'll automatically play without a play button (this should be the setting bc we have enabled the autorun feature).
    Not sure what to do!

  • Problems with launching AI CS 5

    Hi.
    The problem is so:
    I have a german Windows 7 (64), but I am not a germna and therfore I use some other programs in other language. To do this I choose at language settings another language as german for all programms that don't support unicode.
    I used trial of Master Colection CS5 in English and it was all perfect. I bought MC CS5 german version and installed it. I have no problems with Photoshop but Illustrator doesn't want to launch anymore. It says that I must change my system language to German to launch it. If  I do so it works, but in this case I can not use a lot of my other programs and a half of my files will became unreadable. And to restart the Windows every time is a "little bit" annoying.
    I was tried to install MC CS 5 in eglish, but the serial works only with german language, and as far as I know from searching this forum, the only option to get Illustrator installed in english is to buy it once more, unfortunately I can not afford such thing now.
    Now comes a question is it possible to avoid this check at start up and let Illustrattor run?
    I asked support and get an aswer to deactivate all Windows services an try once more. I did it and it doesn't help (and in this case some of my other application are not working too).
    Any ideas?

    Hi there, yes this is unusual. I have illustrator CS5 aswell however there is a print option on mine. What happens if you try using the print short cut? (Command 'p').
    Is this a new problem or have you updated etc?

  • Slate 21 s100/Pro - Android 4.4.2 KitKat - Problem with launcher/home apps

    Hi, Anyone tried to install a different launcher App (Nova for instance) after 4.4.2 upgrade? I experience problem with graphics performance after installation of such an app with ability to register as home app. The app does not even need to be started. Problems occur just after install from Play Store:- Many animations are laggy. For instance horizontal swipe in Calendar app or animation in and out from the app list is quite laggy.- The new menu entry "Home" in settings is probably there to select Home app, but the Settings app itself crashes when touching it. After lots of debugging with own apps, I have a feeling that the graphics hardware acceleration is the problem, but I can not identify the root cause of this behaviour. We have many of these tablets and those which have been upgraded to 4.4.2 behaves the same bad way. The previous 4.2.2 worked perfectly fine. 4.3 that comes with the Pro tablet is also OK, but this also gets problem with KitKat. It would be interesting to hear if others experience the same.  Trond 

    Same problem here in Japan. What I did to try to bypass HP and the lack of appropriate support for this machine, was to install Nova launcher and set up lollipop features. It worked like a charm. Most of the slaggyshness was resolved.I also found a workaround to root the device with Kingroot/Kinguser so that I could rename/erase/move files on sd and usb like use to be with JB when I bought it.  All worked fine until I tried to do a factory reset (had unistalled a core apk that I wanted back) via menu+vol-.  The machine now can boot into the bootloader (I get all the options there), starts the factory reset wizard just fine but then when selecting the option WIFI/Ethernet .."wait a sec..." on screen and then, after a minute or two, it aborts the setup with prompt  "Unfortunately, setup wizard has stopped".Does anyone have a fix for that? BTW, clean cache didn`t work for me.

  • OfficeJet 4500 and Problem with Launching Windows Explorer (XP OS)

    I installed HP OfficeJet 4500 wireless printer with XP operating system on my desktop PC in Wireless mode.  Printing works fine from desktop and wireless laptops.  However, when I try to access Windows Explorer on my desktop PC, using the desktop shortcut or executable file name in the "Run" menu, the screen flashes, goes blank (blue screen) then refreshes the desktop but will not launch Windows Explorer.  This also occurs when I go to My Computer or Network Places and select "My Documents" or click on the root of the C: drive.  The only way I can access my files is to use the actual program they were created in (i.e., Word, Excel, Adobe, etc.)  I used System Restore and restored my computer to a date prior to installing the printer and this solved the problem.  When I reinstalled the HP OfficeJet printer, the problem recurred, so it is definitely associated with installing the printer.  Anyone have a fix for this?  Thanks for your help.

    Hi,
    I haven't seen that issue specifically.  I would download and run the HP Printer Diagnostic Utility.  There might be some file conflicts during the installation that are not resolved that this utility might fix.  I have a C309a AiO that had some other issue that the Diagnostic utility fixed.
    Print Diagnostic Utility
    Say Thanks by clicking the Kudos Star in the post that helped you. Please mark the post that solves your problem as Accepted Solution.
    I am employed by HP

  • Problems with Launch daemon

    I'm having troubles getting a Launch Daemon to work.  I have two that are almost identical and run to fix permissions on a pesky folder (it's a bandaid solution to a permissions problem).  This launch daemon works perfectly:
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
              <key>KeepAlive</key>
              <false/>
              <key>Label</key>
              <string>com.name.script1</string>
              <key>ProgramArguments</key>
              <array>
                        <string>chmod</string>
                        <string>-R</string>
                        <string>770</string>
                        <string>/Path/To/Folder</string>
              </array>
              <key>StartInterval</key>
              <integer>600</integer>
    </dict>
    </plist>
    However, when the folder path contains a space, it doesn't appaer to work. This is my second Launch Daemon which is not working
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
              <key>KeepAlive</key>
              <false/>
              <key>Label</key>
              <string>com.name.script2</string>
              <key>ProgramArguments</key>
              <array>
                        <string>chmod</string>
                        <string>-R</string>
                        <string>770</string>
                        <string>/Path/To\ Folder/</string>
              </array>
              <key>StartInterval</key>
              <integer>600</integer>
    </dict>
    </plist>
    I'm not sure if I'm missing proper syntax in the plist file in order to work with a folder with a name in it.  At this point changing the folder name would cause all sorts of other issues.
    Thanks for your help

    I should not matter, but the 2nd has a trailing slash:
         <string>/Path/To/Folder</string>
       <string>/Path/To\ Folder/</string>

  • [SOLVED] Eclipse in chroot environment - problem with launching it wit

    Hello,
    I have a problem running eclipse (set in 32bit chroot on 64bit OS) with schroot. It was working formerly, but now launching it causes crash.
    Other chrooted apps (like skype or cups) are working properly.
    Error log generated by openjdk.
    Thanks for any help.
    Last edited by Trickster23 (2012-02-19 02:41:07)

    I've posted it in first post, but new one (generated by openjdk7): http://pastebin.com/1Enk7bvF - I can't find file mentioned in 13 line (neither in chroot localization nor normal)
    Well, I've noticed that 'schroot -p eclipse' invoked as root works. Can it imply that this is some permission problem?
    Last edited by Trickster23 (2012-02-12 17:59:27)

  • Problem with launching iTunes

    Whenever I go to launch iTunes, it launches, but then shuts down within two seconds. I have tried reinstalling iTunes, but it continues with this odd habit of launching but then immediately closing.
    I recently moved to the United Kingdom for a semester of school and am unable to contact Apple Tech Support. Does anyone have any advice as to how to fix this problem?

    greetings agrandel, and welcome to the forums.
    you could try reinstalling iTunes properly. click here and follow the instructions.
    or you could create a new admin user account, log in and try launching iTunes.
    what happens ?

  • Problems with Placing into Muse

    Hey ail I have made two separate animations for a site I am doing in Muse. I had the same stage size and put the graphics at the same position on the "floor" lets call it. Problem is when I place the one it shows up perfect in Muse but when I place the other it shows the bounding box and the animation is up way to high and causing one rectangle with text in it to allow the text to overflow outside of the rectangle even though when I play the animation in Edge it looks perfect. I made each the same and with the same floor but one is fine the other not. Any suggestions? Am I clear in my description? Thanks much for any and all advice!

    Moved from the Creative Cloud to the Muse forum. They will be able to help you here.

  • Problems with pictures in Muse

    We have at any given time 2-3 pictures on our website that the bottom half is cutting off.  We use Go Daddy for our hosting.  The bottom half of the space allocated for the picture is gray or white.  We have deleted the images several times, replaced them, re added the same picture, swapped the spaced of which picture goes where, and each time we republish the site 2-3 pictures are cut off.
    Our Muse view and BC view are perfect, the issue is only seen online on the published site.  It is not always the same spot or picture affected, but as soon as we correct one, another cuts off.  I am unable to post screen shots here but would be happy to email some to anyone that can help.
    Portfolio
    The link above is to the portfolio page on our website where we are having the issue.  At this time, near the top, Stainless Countertops is cut off, 2-3 of the way down the page, the picture of the Cable Railing and Planter boxes is cut off, and further down so is the Bar Footrest. It does not make any sense, as soon as we correct one picture another spot is affected.  Again we have deleted the pictures and re added them, we have switched the pictures to different spots, we have used different pictures - at any given time there are 2-3 pictures with the bottom half cut off. 
    Go Daddy told me that our text has been added as an image with clear background, and that our images have been added as background, showing background "options" not image "options".  This is not correct, our test is added as text, and we can edit it.  Our images are added as images, with image "options".  I am on the phone with Go Daddy right now (a different rep of course) and they are telling me that he could not have told me that, that they do not have a way to see what "options" we would have.  So I am really just pleading for anyone that thinks they can help us to give it a shot - Please & Thank you!!!
    Pictures cutting off on website
    Here is a link when we asked this questions previously but responses stopped

    As mentioned in previous post and you have mentioned that it works on BC , please provide the url of BC site too which would help in investigation.
    Thanks,
    Sanjit

  • There is a problem with launching iPhoto.

    Every time I try to launch it crashes and says "You can't open the application iPhoto because it may be damaged or incomplete". I don't know how to resolve this issue If you can help. Thanks

    Reinstall it.
    To re-install iPhoto
    1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
    2. Download it from the App Store to reinstall It's on your Purchases List* there.
    For older versions that have been installed from Disk you'll need these additional steps:
    2a: On 10.5:  Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
    2b: On 10.6: Those receipts may be found as follows:  In the Finder use the Go menu and select Go To Folder. In the resulting window type
    /var/db/receipts/
    2c: on 10.7 or later they're at
    /private/var/db/receipts
    A Finder Window will open at that location and you can remove the iPhoto pkg files.
    3. Re-install.
    If you purchased an iLife Disk, then iPhoto is on it.
    If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
    *Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
    http://support.apple.com/kb/HT4928
    One question often asked: Will I lose my Photos if I reinstall?
    iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.

Maybe you are looking for