Problems with LCD in project mode

I am using GarageBand version 4.1.2. Everything works great until I try to set the LCD screen to project mode. When I do so, portions of the program freeze up and I am not able to either use the features in the project LED screen nor switch to another LCD screen,and I end up having to force quit and restart to work any further on the project. When I am in the project screen, I cannot use program menus, transport controls, or pretty much anything, though if I am listening to something it will keep playing. Any suggestions?

there have been a few threads about similar problems relating to missing fonts. you might try searching this forum or the GB 09 forum for "font"

Similar Messages

I have problems with creating new projects in iMovie.

I have problems with creating new projects. When i try, the mac says the following "Make sure there is enough disk space and that you have permission to write the projects to the drive." I have 8GB available, so its not that.

thanks for your support
lol

Annoying problem with LCD monitor and noise!!

I have MSI 6330 with 1.2 GHz Athlon (it has a built-in sound card), 384 RAM memory.
I just bought a new Cornea 17" LCD monitor with built in speakers.
When I connect the speakers to the sound card, there is an annoying static-like noise coming from the speakers, like an electric transformation sometimes causes. However, this sound is not "broadcasted" to the speakers, because even if I mute the speakers, the noise is still there, as long as there is a picture on the screen. When the monitor is turned off or shows black screen (such as during start up, or when in power-save mode) the noise disappear. The only way to eliminate this noise is buy reducing (almost to zero) the speakers volume, but then you can cannot hear anything at all, not even sound.
I got a new sound card (I thought it was the sound card problem) - same thing. I connected the monitor to a different computer and the problem is gone, which means - it is something with the computer, mobo, different device....something, I don't know what.
Any one have an idea what this could be?
Thank you.

Hi!
It could be that you have some problem with the monitor.
I have - so far - not encountered a monitor with built in speakers which gave acceptable sound anyway, the easiest solution might be that you will not use the speakers in the monitor (even the cheapest stand alone speakers will most likely produce better sound quality).
Hans

Problem with rotation and landscape mode in iOS 8

From start of iOS 8 I have got problem with rotation in my iPhone 5S 32GB as well as in my iPad mini retina 32GB. Automatical rotation to landscape mode is not working correctly. For example if you take the phone or tablet to landscape mode in base display and tap to Safari, Mail, Messages, the app will start but stay in normal mode, not landscape. Then you have to back the phone to normal portrait mode and back to landscape and only then the phone do the landscape mode. I have never seen this problem in iOS 7 or older.
Could you help me anyone with this problem? Or is the problem generally in iOS 8.
Thanks a lot
Jakub

Brian, thanks, but it's not a rotation lock issue - at least not relating to the rotation lock setting. It's just a general use setting. Right now i have my iPhone propped in landscape mode. If I now hit the home button, essentially returning to a portrait setting though my phone is still positioned in landscape, then open any other app that supports landscape, that app WILL NOT orient itself to landscape mode. It will stay in portrait mode. The phone has to be physically oriented to portrait, then back to landscape for the app to register landscape mode properly. This is a glitch, and not a rotation lock issue. it ought to be noted that this was not an issue in iOS 7 or any previous iteration.

PDF printer has a problem with Safari in "Reader" mode in Windows7

As shown in the image above. When I try to use the PDF printer to print out a web page in Safari "Reader" mode, the lines near the bottom of each page get squeezed like this. There is no problem with XPS printer. I guess this problem is because of some incorrect settings in Safari or the PDF printer?
My system is Windows 7 Pro. I am using Acrobat X Pro. The page I am trying to print is http://en.wikipedia.org/wiki/Electronic_band_structure. This problem only happens when the webpage is adjusted into "Reader" mode in Safari.

Many thanks for your reply!
I am sorry, I did not make my question clear. I would like to save some web pages only in "Reader" mode, because in this mode all the advertisements are filtered out and the pages look much nicer than the origional layout.
I first let Safari to active "Reader" by clicking "Reader" button.
Then I click "Print" button and select Adobe PDF as the printer.
The problem is the PDF file has something wrong (shown above), and I would like to know how to avoid this problem.

Problem with printing in character mode

Hi
I got a genuine problem in printing continous payslips using character mode with a TALLY6050 printer.
I guess there is a problem with the page setup when i try to print via windows. using different sizes of paper (Letter, A4, A3), the printed data is shifting from one page to another but the shift is following a same trend.
i tried to put one payslip per page using page breaks, but in vain. Three payslips are being printed on one page when viewed in the print perview.
Can anyone suggest any help or tips so that i can solve this problem?
Thanks for your help
Bhavish

Thanks for your response. I went ahead and filed a Correction Action Request for your orignal issue, since I was able to reproduce the same behavior when I ran your VI. The solution of printing the front panel of a subVI displaying the same graph is a workaround for this problem. Please look at the following KnowledgeBase for more details on how to do this. Hope this helps!
How Do I Print a Single Control from the Front Panel (for example, a Graph)?

Burn Problem with a 4GB project: "Layer 0 Exceeds"

First off this is not the usual Dual-Layer problem. I know all about Layers how they work and how to make them. Although the error I receive deals with DL my projects or nowhere near that size.
I recently had DVDSP 4 crash on me. Ever since than its been running really funny. The biggest issue I am having is that it won't allow me to burn a DVD 5. My projects usually range from 2.5GB - 4.5GB. Let me also say that DVDSP 4's Disc meter has always been a pretty good gauge as far as I am concerned. It's always been right on telling me if something was going to fit on a DVD 5 or 9.
My problem ever since the crash is that DVDSP will not allow me to burn a DVD unless the project is under 3.5GB. I have tried everything, including a Full Re-install of DVDSP. Every time I try to burn a DVD I get the following error message:
+"Formatting was not successful. Layer 0 exceeds the maximum layer size allowed. Please choose a suitable marker location that will support this condition."+
My latest project is dealing with a 4.4Gb (according to Meter) 4.32GB actually. It is impossible for me to burn a DVD because of the error message above. I can however run the project out on a Single DLT. How does that work?
Has anyone else had a problem like this? Does anyone have an suggestions?
I have checked all the obvious settings in DVDSP and all seem to be right. I can't figure this one out.

I've never had a problem burning a 4.4 disc on a DVD 5 until now. I actually went back to some of my previous project that were a DVD-5 and I am unable to burn those now too. Everything really got screwed up on that last Crash.
Yes. I am using AC3 audio.
I have not yet tried burning my DVD project through another program...but thats a good idea.
I usually burn a DVD and DLT for the replicators...but I know they prefer a DLT. What I find odd about all of this is that I am able to run out a DLT with no errors at all. It only seems to be on the DVD side.
In regards to the uninstall...I used the exact program. I am actually in the process of doing a full reinstall of FCP2 Suite.
I'll let you know how it goes. Thanks for the suggestions.
Mike A.

Problem with LCD hitting the back edge

My Macbook has a problem. The bezel on the LCD towards the very rear of the screen rubs against the base edge when I open up the MacBook.
Here is a picture to describe what I mean:
http://www.flickr.com/photos/47365659@N00/151797793/
That little piece is sticking out. If I open the MacBook from with more force on the right edge, then the tab hits even more and there is enough friction to make an alarming snapping sound.
I hope apple replaces my macbook as I just received it today from fedex!
Has anyone experienced this yet?
Macbook Mac OS X (10.4.6)

I have not had this problem with my Macbook.
I suggest you contact them right away.
I also suggest you don't "ask" them to replace it. I would tell them it needs to be replace. Over time I think that will make for a nasty scar on your notebook. Considering black macbook owners pay 150$ for just the color, Apple knows that how these look has much to do with their value and shoudl approach the problem knowing that.
I hope it goes well, and expect it will.
Kalel

Problems with environments and transactional mode in the Python API

Hello everyone,
I have been having problems with the Python API, and I wonder if anyone can comment? I am using DB XML version 2.2.13, with python 2.3 (RedHat linux WS 4.0) and python 2.4 (SuSE 10.1) with identical results. I started with a simple example:
#!/usr/bin/python
"""XPath example from http://www.w3schools.com/xpath/default.asp
ported to DbXML
from bsddb3.db import *
from dbxml import *
books = """<?xml version="1.0" encoding="ISO-8859-1"?>
<bookstore>
[xml data omitted for brevity]
</bookstore>"""
if __name__ == "__main__":
    conFlags = DB_CREATE | DB_NOMMAP
    myMgr = XmlManager()
    myMgr.setDefaultContainerFlags(conFlags)
    myMgr.setDefaultContainerType( XmlContainer.NodeContainer)
    uc = myMgr.createUpdateContext()
    container = myMgr.createContainer("books.dbxml")
    container.putDocument("books.xml", books, uc)So far, so good - this works, and creates a container books.dbxml that I can open and query. Next, I try to instantiate the XmlManager using an environment:
if __name__ == "__main__":
    envFlags = DB_CREATE | DB_PRIVATE
    conFlags = DB_CREATE | DB_EXCL | DB_NOMMAP
    myEnv = DBEnv()
    myEnv.open("/home/pkeller/dbxml_tests", envFlags, 0)
    myMgr = XmlManager(myEnv, DBXML_ADOPT_DBENV)
    myMgr.setDefaultContainerFlags(conFlags)
    myMgr.setDefaultContainerType( XmlContainer.NodeContainer)
    uc = myMgr.createUpdateContext()
    container = myMgr.createContainer("books.dbxml")
    container.putDocument("books.xml", books, uc)This fails with the following output:
Traceback (most recent call last):
File "w3school_xpath_c2.py", line 60, in ?
    container = myMgr.createContainer("books.dbxml")
File "/scratch_bernoulli/pkeller/dbxml/install/lib/python2.3/site-packages/dbxml.py", line 125, in createContainer
    def createContainer(*args): return dbxml.XmlManagercreateContainer(*args)
RuntimeError: Error: Invalid argument
Segmentation faultA bit odd - I can't find anything in the docs about the required arguments to XmlManager.createContainer being different if an environment has been used explicitly.
Anyway, I persevered (my aim being to use transactional mode in Python). Changing the environment and container flags like so:
    envFlags = DB_CREATE | DB_INIT_LOCK | DB_INIT_LOG | DB_INIT_MPOOL | DB_INIT_TXN | DB_PRIVATE
    conFlags = DB_CREATE | DB_EXCL | DBXML_TRANSACTIONAL | DB_NOMMAPThis change allowed the script to run, outputting the single classic line:
Segmentation fault(the C++ API docs at http://www.sleepycat.com/xmldocs/gsg_xml/cxx/transaction.html#initializetransaction are incorrect by the way - there is no flag DB_TRANSACTIONAL).
In spite of the segfault, the file "books.dbxml" was produced and could be queried by another application. A transaction log file "log.0000000001" was also written (10485760 bytes long).
Running this last example again with "python -v" showed that the segfault was being produced during the python's cleanup phase:
# clear __builtin__._
# clear sys.path
# clear sys.argv
# clear sys.ps1
# clear sys.ps2
# clear sys.exitfunc
# clear sys.exc_type
# clear sys.exc_value
# clear sys.exc_traceback
# clear sys.last_type
# clear sys.last_value
# clear sys.last_traceback
# clear sys.path_hooks
# clear sys.path_importer_cache
# clear sys.meta_path
# restore sys.stdin
# restore sys.stdout
# restore sys.stderr
# cleanup __main__
Segmentation faultCan anyone clarify what is going on? I had been hoping to deploy DB XML as an alternative to something more admin-heavy, but with this behaviour that would be hard to justify. A dirty exit from Python means that no-one will consider trusting their data to this engine (or am I doing something wrong?).
Regards,
Peter.

Peter,
Your first failure -- invalid argument -- was due to an invalid combination of
flags to DBEnv.open(). Along with DB_CREATE you need at least DB_INIT_MPOOL.
As you can see, it worked once you added more flags.
The second, cleanup problem (segmentation fault) is the result of out of order
destruction of objects. This is fixed in the next release (later this year), but
you can work around it by ensuring that your XmlContainer and XmlManager
objects are deleted/cleaned up before the DBEnv object.
Python will cleanup in reverse order of creation, unless you perform explicit
deletions, which is also fine (e.g. del container, del myMgr).
Explicit deletion is always safe.
Regards,
George

Problems with MySQL in Slave mode

Hi erverybody!!!
I have a problem with my IDM and mysql.
This is my envioroment:
I have installed one IDM and has a Database on Mysql. I have a DRP and i have other server of IDM an his database.
The databases of mysql are replicated and are configurated like "Master-Slave"
My problem:
When the production server is down i try to work with the DRP enviorement but the IDM can't access to the database.
My question
When the instance is on "slave mode" the IDM can access to the database??
Thanks 4 your answers

This happens to be an Oracle forum.
Oracle is not akin to MySQL in any fashion.
Please use Google to find a MySQL forum.
Sybrand Bakker
Senior Oracle DBA

Problems with Internet in sleeping mode

Hello,
I have a such problem. Approximatly in 10 min after starting sleeping mode my phone can not receive incoming calls from Skype and Viber. There is no problem in a few min after sleeping mode or when a screen is on. I have this problem whenever wi-fi or 3 G connection is. When the screen is on after that I receive messages about missing calls. Swithing stamina off, reinstalling of phone's soft doesn't help. Wi-fi is always on in settings, mobile transfer is on too. Help me, please.

Thanks Alexdon for trying to help me (I've changed my account, because forgot pass and service for changing pass didn't work (so an account "Dietor can be deleted"). Solving my problem was setting up other firmware (D5503 14.2.A.1.114).
When I set up firmware ...757 through Flashtool, the problem repeated (it was regardless Stamina off or on).
Will settting up of this firmware per PC Companion help? Does problem with battery drain in last firware exist?

Problems with a xcode project

Hi there,
I'm trying to compile an existing Xcode project which has used boost library and threadpool library. I have already added the correct header path and library path, and the boost has been successfully compiled(cause the code uses libboost_thread.a).
Here's my header search path:
/usr/local/installation/prefix/include(boost header after installed)
/usr/local/boost1_450
/Users/niexiao2008/threadpool-025-src/threadpool/boost
And the library search path is:
/usr/local/installation/prefix/lib
I'm sure the boost library has been installed correctly and passed through some test codes, but there's still some problems when buliding the project:
i686-apple-darwin10-gcc-4.2.1: error trying to exec '/Developer/usr/bin/../libexec/gcc/i686-apple-darwin10/4.2.1/cc1plus': execv: Argument list too long
Command /Developer/usr/bin/gcc-4.2 failed with exit code 1
Could someone please help?

In the Build results window select the compile line that is failing. This should reveal a 'details' icon on the line to the right. Click the icon to display the actual compile command and try to determine why the argument list is too long.

Problems with opening/creating projects

Hi all, this is my first post so Welcome
I have a problem with Photoshop CS4 Extendet. After installing it under Windows 7 when I'm trying to start a new project or open a graphic in Photoshop the only thing which happens is a gray window of project without any graphic, without possibility to work on it etc. I know that graphic is loaded but I can't work on it. When I'm trying to move/large window, it crashes. Here you can see what I see when I load any graphic: http://img231.imageshack.us/img231/6120/61404388.jpg - you can see that photograph is loaded in layers menu section but in window it doesn't appear.
I have used this Photoshop under Windows 7, even same computer some time ago, but with different hard disc. And then it worked properly without any problems. I don't know why now after installing it I have such problems. What can I do? Is it a metter of drivers for graphic cards ot something like that? I'm useing the latest drivers for graphic card and all drivers for Windows and it's components are the newest one.
Here is ma computer specification:
Processor Intel Core i7 920 2.67GHz, 6GB ram, two graphic cards NVIDIA GeForce GTX 285, motherboard Asus P6T Intel X58 Windows 7 Home edition 64 bit.
What should I do now?

As is so often suggested here, check the nVidia web site for updated video drivers for your card. Chances are very good they have already fixed this problem.
-Noel

Problems with sharing a project from Final cut x

I have just purchased a canon Legria g10 (pal) and when I share(export) the project I get horizontal lines on the image, the raw footage looks fine in quicktime but when I edit and share it back out of Final Cut x it has the lines. Do I need to de-interlace and if so why? will I have to do this everytime I use the camera? or is the problem with settings on the camera? Any help would be greatly appriciated.
thanks in advance

Hi Tom,
thanks for the swift reply. Here are the screengrabs
the exported footage
the original footage
and the propeties of the original footage
and the properties of the exported file

Problems with burning HDV projects to IDVD

I have been using iDVD to burn my HDV sequences and it has been working great. Just recently when I burn a DVD it comes up with a green band at the bottom of the DVD. It doesn't happen with SD projects. I just upgreaded to Ilife 8 and upgraded my operating system to 10.4.11, does anyone know if there is a problem with this and why all of a sudden I can't burn an a DVD.

Hi iRose,
Thanks for giving all your info. Your free space on your hard drive is not enough to do a successful burn of the entire iPhoto Library. Do you have an external drive? Is your drive supported for iPhoto burning? usually on the internal that comes with the computer is supported.
Try instead to burn the entire iPhoto Library folder in the Finder using your external burner.
Close iPhoto
I can't burn a Cd or DVD
The next info is from iPhoto FAQ on the Apple site
Question 5: Can I burn a CD or DVD to back up my iPhoto library?
Answer: Yes, you can easily back up your iPhoto library by using the CD burning capabilities of Mac OS X. Simply insert a blank CD into your internal or external CD-RW drive and copy the iPhoto library to the CD icon on your desktop. When you drag the CD icon to the Trash/Eject button in the Dock, you are given the option to burn the CD. Click Burn and the CD is created. To burn a DVD backup of your digital images, use iDVD and a SuperDrive-equipped Mac.
Lori

Problems with LCD in project mode

Similar Messages

Maybe you are looking for